TempMate IR thermometer with bluetooth
Quickstart guide
Specifications
English
Metric
Temperature range
Non-contact (IR) -0 to +1,832° F
Contact (K) -148 to +2,192° F
-20 to +1,000° C
-100 to +1,200° C
Accuracy
Non-contact (IR) <32° F: ±5° F / >32° F: ±3.5° F
Contact (K) ±2% or ±2° F whichever is greater
<0° C: ±3° C / >0° C: ±2° C
±2% or ±2° C whichever is greater
Temperature
Operating +32 to +120° F
Storage +14 to +140° F (without battery)
0 to +50° C
-10 to +60° C (without battery)
Power supply
Easy to read
backlit display
CE certified
1 9V battery (alkaline or NiCd)
Response time
1 second
Spectral response
7 ~ 14 μm
Emissivity, adjustable
0.3 to 0.99
Distance to spot ratio
12:1
Laser
sighting
Bluetooth
communication
Troubleshooting
Temperature seems inaccurate
•
•
•
•
Dirty optical lens
Low battery
Unit is too far from target
Poor emissivity qualities of surface
Will not communicate with PC
•
•
•
Not paired correctly
Turn on Bluetooth
Use PIN code 1234
Push button
operation
Unit or laser does not power on
•
•
Dead or low battery
Broken battery or laser connector
About us
Meggitt Sensing Systems is a leading innovator and
manufacturer of vibration sensing products and systems.
Our reputation for industry-leading product quality and
reliability is backed by more than 60 years of innovation
and experience.
Monitoring changes in vibration and temperature can be
critical in preventing damage to equipment and costly
delays. The quality and performance of our products
ensure accurate and continuous monitoring of machinery
health, enabling condition based maintenance of both
critical and balance of plant assets.
Meggitt Sensing Systems
20511 Seneca Meadows Parkway
Germantown MD 20876
USA
MachineryMate@meggitt.com
www.wilcoxon.com
www.meggitt.com
Sensors for every application
>> Hazardous area certified
>> 4-20 mA output
>> Low/high frequency
>> Dual output
>> High temperature
>> 4-20 mA output
>> Triaxial
>> Radiation resistant
Contact and
non-contact readings
Accessories
>> Transmitters and alarms
>> Cable assemblies
>> Mounting hardware
>> Handheld meters
>> Enclosures
Tel: +1 (301) 330 8811
Fax: +1 (301) 330 8873
Applications
HVAC/R
Oil & gas
Food and beverage
Manufacturing processes
Easily monitor
Steam traps
Bearing housings
Transformer oil
Circuit breakers
TempMate IR thermometer
The easy to use MAC100 assists in temperature readings of critical machinery.
For contact measurements, the meter uses a K-type thermocouple probe.
Bluetooth communication allows streaming of temperature data to your PC for
quick analysis and storage.
Safety considerations
MachineryMate™
Never point the laser
at someone’s
eyes or look directly into the beam.
Infraredbeam
thermometer
with bluetooth
Use caution when measuring a shiny surface so the laser does not reflect back
S/N
into your or someone else’s eyes.
Do not touch the lens to foreign objects.
Made in S. Korea
Do not expose the unit to damp environments for extended periods of time.
MachineryMate™
Infrared thermometer with bluetooth
Maintenance and care
The MAC100 S/N
is powered by a 9 volt alkaline battery (included). Replace the
Made in S. Korea
MachineryMate™
battery when the
low battery indicator appears on the screen by removing the
Infrared thermometer with bluetooth
battery compartment cover. Clean the surface and optical lens with a damp cloth.
S/N
Service and MachineryMate™
warranty
Made in S. Korea
The MAC100
isthermometer
coveredwith
bybluetooth
a 3 year warranty, in the unlikely case of malfunction,
Infrared
please contact
us
for
an
RMA
number.
S/N
Made in S. Korea
Buttons
MAC100
MachineryMate™
Infrared thermometer with bluetooth
Backlight and laser - hold down the trigger and the SEL button to turn the
S/N
SEL LOCK
backlight or laser on/off.
S. Korea
Measurement
type
- hold down Made
thein trigger
and press the SEL button to select
C/ F
REC Bluetooth Alarm
non-contact (IR) or contact (K-type) input.
°
°
MAC100
Keeps power on even when trigger is released (for 70 seconds), and will display
LOCK on the screen. Push the LOCK button again to turn off lock feature (unit
MAC100turns off after 7 seconds).
SEL
LOCK
C/°F
°
REC
Bluetooth
SEL
REC
°
Bluetooth
MAC100
SEL
EC
Hold the trigger and press the C/F button to select Celsius or Fahrenheit. To
activate Bluetooth, continue to hold the C/F button until Bluetooth on appears
Alarmthe screen. To turn off Bluetooth, hold the C/F button until Bluetooth oFF is
on
displayed.
LOCK
C/ F
°
°
Bluetooth
If the temperature reading is exceeds alarm settings, the meter will beep and display
Low Alarm or High Alarm.
1. Activate LOCK function
2. Press and hold the ε button for 3 seconds until Alarm and High flash on the display.
Use the LOCK and C/F buttons to adjust the high alarm value.
3. Press the ε button until Alarm and Low flashes on the display. Use the LOCK and
C/F buttons to adjust the low alarm value.
4. Press the ε button to return to normal operation.
Taking a non-contact reading: infrared (IR) mode
1. Hold down the trigger to turn the unit on.
2. Align the laser with the target, holding the front of the thermometer 8 inches from
the target (spot size will be 1 inch at this distance).
3. Read the temperature on the screen.
Taking a contact reading: thermocouple (K) mode
1.
2.
3.
4.
5.
Hold down the trigger to turn the unit on and push the LOCK button.
Press the SEL button until K appears next to LOCK on the screen.
Connect the temperature probe to the input jack on the front of the handle.
Insert the probe tip into the air, liquid or touch the surface to be measured.
Read the temperature on the screen.
To set emissivity using a contact probe when emissivity is not known:
5. Follow steps 1-4 above and note the temperature reading.
6. Remove the probe.
7. Hold down the LOCK button to turn the meter off.
8. After meter is off, point the instrument at the location the probe took the
measurement and squeeze the trigger.
9. Press the ε button and the LOCK or C/F button until the display reading matches
the reading from step 6.
10. Press the SEL button to save the setting. Emissivity is set for the surface.
Alarm
LOCK
C/°F
Setting the alarm
Hold the trigger and press the ε button till ε = flashes on the display. Push the
LOCK button to increase the emissivity or the C/F button to decrease. Push the ε
AlarmMAC100
button to save the setting.
SEL
LOCK
Hold the trigger and press the REC button until REC is shown on the display. Push
C/ F
the RECAlarmbutton to toggle between the recorded min and max temperatures. Hold
REC Bluetooth
down the REC button for 3 seconds to turn recording mode off.
°
°
Email MachineryMate@meggitt.com for more information
Full product manual available at www.wilcoxon.com
Connecting Bluetooth
1. Hold the trigger and press the C/F button until Bluetooth on is displayed.
2. Search for Bluetooth devices on your PC. The meter will be listed as
MAC100XXXXXXXX (X=last 8 digits of serial number).
3. Pair the meter over Bluetooth. If asked for a PIN use 1234. Windows will assign
incoming and outgoing COM ports.
4. Start Windows hyperterminal or similar program. Use the COM port setting as
assigned in step 3.
5. Press the hyperterminal CONNECT button.
6. THe MAC100 will beep when the connection is made and data will begin streaming
in ASCII format at 1 reading/sec.
7. Data will stream as long as LOCK function is in use or trigger is held.
MAC100 handheld thermometer with bluetooth
Instant readings for machinery health and diagnostics