USER MANUAL
Display
TIME SETTING
Standard
B
A
C = 1/10 sec.
D
J
SET
E
ABC
F
I
G
H
Chrono automatic
A
GO
ABC
B
D
H
E
F
I
G
C2
SET
ABC
Retrograde
G
C1 = 1/2 min.
A1
D
E
F
I
B
H
A:
A1:
A2:
B:
C:
C1:
C2:
D:
E:
F:
G:
H:
I:
J:
Minutes counter (60 minutes)
5 minutes counter (60 minutes)
Minutes counter (30 minutes)
Seconds counter
1/10 second counter
1/2 minutes counter
6 minutes counter (6 hours)
Push-button
Crown
Push-button
Hours hand
Seconds hand
Minutes hand
Light Function
A:
C:
Normal position of the crown
Position for setting the time
o set the time, pull the crown out to
T
posi-tion C and turn clockwise or anticlockwise. After resetting has been
completed, press the crown back to
position A.
1/6
USER MANUAL
SPLIT TIME
DATE SETTING
Standard
RETROGRADE
SET
1
GO
1
ABC
STOP
GO
ABC
2
2
GO
To set the date, pull the crown out to position B and turn clockwise or anticlockwise.
After resetting has been completed, press
the crown back to position A.
3
3
4
STOP
4
RESET
5
5
Press…
1. The upper push-button to start the
chronograph.
2.The lower push-button to read the
intermediary time.
3.Once again to continue (repeat the las
two actions as many times as you wish
to read the intermediary time while the
chrono carries on).
4.The upper push-button to stop finally.
5.The lower push-button to reset.
2/6
USER MANUAL
TIMing mode
STANDARD
ADD FUNCTION
RETROGRADE
1
CHRONO
AUTOMATIC
1
STANDARD
1
START
RETROGRADE
CHRONO
AUTOMATIC
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
GO
2
2
2
STOP
STOP
GO
RESET
3
3
3
STOP
RESET
Press…
1. The upper push-button to start the
chronograph.
2.Once again to read the elapsed time.
3.The lower push-button to reset.
Retrograde: The duration of timing is limited to 2 hours.
Press…
1. The upper push-button to start.
2.The upper push-button to read the firs
time.
3.The upper push-button to restart the
chronograph.
4.The upper push-button to read the
additional time (repeat these two steps
as many time as you wish).
5.The lower push-button to reset.
3/6
USER MANUAL
TACHYMETER
Standard
READJUSTMENT
RETROGRADE
Standard
START
1
1
2
ABC
1
ABC
STOP
2
2
ABC
ABC
4
3
5
RESET
3
ABC
ABC
6
3
Measure the speed Base 100 or 1000 m.
Press...
1. The upper push-button when an action
starts.
2. Once again to stop after a distance of
100 or 1000 m. Read the speed indica-
ted by the 60 seconds counter
(Retrograde: 30 sec.) on the tachymeter
scale (km/h = kph).
3.The lower push-button to reset.
Adjusting the chronograph
(e. g.: after battery change or a hard shock)
1. Pull the crown to position B.
2.Press the upper button to reach the
position 12h00 with the hand of the 1/10
seconds counter.
3.Press the lower button to reach the
position 12h00 with the hand of the
seconds.
4.Pull the crown to the position C.
5.Press the upper button to reach the
position 12h00 with the hand of the
minutes counters.
6.Press the crown to position A.
4/6
USER MANUAL
IRONY CHRONO MEDIUM
RETROGRADE
ABC
1
ABC
ABC
2
4
4
ABC
ABC
ABC
3
3
ABC
ABC
2
ABC
ABC
1
6
5
ABC
ABC
6
5
Adjusting the chronograph
(e. g.: after battery change or a hard shock)
Adjusting the chronograph
(e. g.: after battery change or a hard shock)
1.Pull the crown to position B.
2. Press the lower button to reach the
position 0 with the hand of the minutes
counter.
3.Press the crown to the position C.
4.Press the upper button to reach the
position 3h00 with the hand of the
seconds counter.
5.Press the lower button to reach the
position 0 with the hand of the 1/2
minute counter.
6.Press the crown to position A.
1.Pull the crown to position B.
2.Press the lower button to reach the
position 12h00 with the hand of the
minutes counter.
3.Press the crown to the position C.
4.Press the upper button to reach the
position 12h00 with the hand of the
seconds counter.
5.Press the lower button to reach the
position 12h00 with the hand of the
1/10 sec. counter.
6.Press the crown to position A.
5/6
USER MANUAL
SKIN CHRONO
P1
P2
P2
P1
P2
P1
P2
P1
P1
P2
Adjusting the chronograph
(e. g.: after battery change or a hard shock)
1. Simultaneously P1 + P2 until A, B and C
complete the cycle.
2.P2. A completes a whole cycle.
3.P1 to align A.
4.P2 again, and B completes a whole cycle.
5.P1 to align B.
6.P2 again, and C completes a whole cycle.
7. P1 to align C.
8.Simultaneously P1 + P2 again, to com
plete the readjustment process. The watch will acknowledge this procedure
with a revolution on all displays. If P1 + P2 are not pressed within 5 seconds, the watch will carry out the acknowledge ment function automatically.
6/6