AM 90x_x1x
Ordering Information
AM 90x/x1x AMC Double-Width 3rd Gen Intel Core CPU
www.gocct.com
Specification
Datasheet
Datasheet: http://www.gocct.com/sheets/AM/am90xx1x.htm
Block Diagram: http://www.gocct.com/sheets/AM/block_diagram/am90xx1x.gif
CPU Type Core i7 (3rd Gen)
CPU Speed 4-core 2.1 GHz
or 2-core 2.5 GHz
Last Level Cache up to 6M bytes shared
DDR3-1600 ECC DRAM 16G bytes max
1. Ordering Code for Board
AM 90x/x1x-yz AMC Double-Width SBC
AM 90x/x1x
3rd generation Intel Core processors
Dual-Core Processor
Quad-Core Processor
900/212 2-core 2.5 GHz (25W) Intel Core i7-3555LE, full-height front panel
902/211 4-core: 2.1 GHz (35W) Intel Core i7-3612QE, full-height front panel
900/412 2-core 2.5 GHz (25W) Intel Core i7-3555LE, mid-height front panel 902/411 4-core: 2.1 GHz (35W) Intel Core i7-3612QE, mid-height front panel
-yz rear I/O options (PCI Express supports Gen 1, Gen 2 or Gen 3)
1z dual x4 PCI Express Fat Pipes. Extended Options Region I/O = GPIO, 2xUSB, 1xRS232 and 2xSATA. MTCA.4 uRTM connector = not fitted
2z single x4 PCI Express Fat Pipe. Extended Options Region I/O = none (SCOPE Alliance and MTCA.4 compliant). MTCA.4 uRTM connector = not fitted
3z dual x4 PCI Express Fat Pipes. Extended Options Region I/O = none. MTCA.4 uRTM connector = not fitted
4z single x4 PCI Express Fat Pipes. Extended Options Region I/O = none (MTCA.4 compliant ). MTCA.4 uRTM connector = fitted
-yz Memory Configuration
y2 8 Gbytes
y3 16 Gbytes
0°C to +55°C
full-height mid-height
N-Series
N-Series
operating temperature
900/x12
902/x11
2-core 2.5 GHz (25W) Intel Core i7-3555LE
Yes
Yes
4-core: 2.1 GHz (35W) Intel Core i7-3612QE
Yes
Yes
2. Operating System Support
BSP Part #
OS Type
CD LNX/BS1-L0
Linux
CD LNX/BS1-L0
Linux, 64-bit
--LynxOS
--Solaris
--Solaris, 64-bit
CD VXW/BS1-L0
VxWorks
--QNX
--WS 2003
CD WIN/BS1-M0
WS 2008
CD WIN/BS1-M0
WXP, WXPE
CD WIN/BS1-M0
W7, WES7
--WS 2003, 64-bit
CD WIN/BS4-M0
WS 2008, 64-bit
WXP,WXPE, 64-bit CD WIN/BS4-M0
W7, WES7, 64-bit CD WIN/BS4-M0
2.1 OS BSP Version Availability Matrix
Check BSP availability for target Operating System via link below
Available?
www.cct.co.uk:55555/salesmanual/os/os.htm
(includes 64-bit support as stated in the matrix)
AM 90x_x1x OC03 Sep12
1 of 2
AM 90x_x1x
3. Related Products : Select any extras required for the system
CB DYP/121-00
00
DisplayPort to VGA convertor cable
DisplayPort connector to VGA HD15 connector
Note: not supplied with AM 90x/x1x. Must be ordered separately. Provides analog VGA HD15 connector
CB DYP/131-00
DisplayPort to DVI-D Convertor
DisplayPort connector to DVI-D connector cable
Note: not supplied with AM 90x/x1x. Must be ordered separately. Provides digital graphics via DVI-D connector
00
AD AM1/x01-wz
AM 90x/41x-4z >>
/201-10
/401-10
AMC micro-Rear Transition Module
AMC micro-Rear Transition Module, full-height front panel
AMC micro-Rear Transition Module, mid-height front panel
3.1 Mass Storage Options
AD 110/004
AD 110/004-wz
AD 110/0040z
5z
71
1 x 2.5-inch or 2 x Half-Slim
User
Option
SATA 1 User Option:
Half-Slim drive - use AD 130/001
SATA 2 User Option:
2.5-inch drive - use AD 110/004
Half-Slim drive - use AD 135/001
Notes:
a) When the 2.5-inch drive option is selected
then the half-slim drive options cannot be
selected
SATA 1
2
SATA
2.5-inch SSD/HDD
SATA
Half-Slim
SSD
SATA
Half-Slim
SSD
AD 135/001
AD 130/001
Switch
AM 90x/21x-4z >>
SATA
Flash
Drive
SATA 1
2
2.5-inch Mass Storage Drive kit for SATA 2 site
The AD 110/004 2.5-inch mass storage drive kit is required for the SATA 2 site.
Mounting screw kit providing an on-board 2.5-inch typical capacity SATA drive (call for details on current size)
Mounting screw kit providing an on-board 2.5-inch larger capacity SATA drive (call for details on current size)
Mounting screw kit without an on-board 2.5-inch SATA drive (e.g. for use with customer mass storage drive)
-wz
w1
w2
type of mass-storage drive
2.5-inch SATA hard-disk drive (HDD)
2.5-inch SATA solid-state drive (SSD)
Note: The AD 110/004 mass storage drive assembly can be fitted to the AM 90x/x1x mid-height and full-height variants
AD 130/001-wz
AD 130/00102
52
71
AD 135/001-wz
AD 135/00102
52
71
Half-Slim Mass Storage Drive assembly for SATA 1 site
The AD 130/001 mass storage drive assembly is required for the SATA 1 site. For the SATA 2 site use the AD 135/001
Mechanical assembly providing an on-board half-slim typical capacity SSD drive (call for details on current size)
Mechanical assembly providing an on-board half-slim larger capacity SSD drive (call for details on current size)
Mechanical assembly without an on-board half-slim drive (e.g. for use with customer mass storage drive)
Half-Slim Mass Storage Drive kit for SATA 2 site
The AD 135/001 mass storage drive kit is required for the SATA 2 site. For the SATA 1 site use the AD 130/001
Mounting screw kit and an on-board half-slim typical capacity SSD drive (call for details on current size)
Mounting screw kit and an on-board half-slim larger capacity SSD drive (call for details on current size)
Mounting screw kit without an on-board half-slim drive (e.g. for use with customer mass storage drive)
4. Ordering Example
AM 900/212-32 2-core 2.5 GHz (25W) Intel Core i7-3555LE, full-height front panel,
dual x4 PCI Express Fat Pipes. Extended Options Region I/O = none. MTCA.4 uRTM connector = not fitted,
8 Gbytes DRAM
AM 90x_x1x OC03 Sep12
2 of 2