04/07/10
INCANDESCENT DIRECTIONAL FLOODLIGHTS
SHROUDED PROFILE SURFACE MOUNT
(E-GLSP20S1K, E-GLSP30S1K, E-GLSP38S1K)
Applications – For accenting architecture or lighting landscape areas.
E-GLSP20S1K
*PAR20, 50W max
E-GLSP30S1K
*PAR30, 75W max
7.75"
9.675"
(197 mm)
(FLAT)
(246 mm)
(FLAT)
5.375"
6.5"
(137 mm)
(165 mm)
3.25"
4.375"
(83 mm)
(111 mm)
3.25"
2.88"
(83 mm)
(73 mm)
E-GLSP38S1K
*PAR38, 150W max
10.875"
(276 mm)
(FLAT)
7"
(178 mm)
5.5"
(140 mm)
2"
(51 mm)
*Lamps are not included, must order separately
Features
• Die-cast copper-free aluminum housing and lens assembly
• Fixture is completely sealed and includes a silicone O-ring
sealing system
• Fixture head rotates 360° and screws into place with 1/2"
locking nut
• Fixture head has a tilt range of 125° on the adjustable fitter and
locks into position with one allen screw.
• Swivel is die-cast copper-free aluminum with threaded end
1/2"-14 NPSM
•
•
•
•
•
•
PAR20 and PAR30 lens is tempered glass
PAR38 lens is borosilicate glass
Junction box cover not included
E-coat epoxy primer with textured ultra-durable powder topcoat
UL listed for wet locations
1-year warranty
Mounting Options
Surface Mount:
Ground Mount:
• Surface mounting is possible over octagonal or single gang J-box
with Cast junction box cover acessory (E-GAJB1K & E-GAJB2K)
• Ground mounting may be accomplished by using the Conduit
Slipfitter accessory (E-ACMNH2K) on 2" pipe or Ground Mount
Post accessory (E-ACGM1K).
• (E-GAMNB2K) is also available for ground mount. Mounting box
will include stake, 10' cord and 120V plug.
1 5 0 1 9 6 t h S t r e e t S t u r t e v a n t , W i s c o n s i n 5 3 1 7 7 | ( 8 8 8 ) 2 4 3 - 9 4 4 5 | F a x ( 2 6 2 ) 5 0 4 - 5 4 0 9 | w w w. e – c o n o l i g h t . c o m
04/07/10
INCANDESCENT DIRECTIONAL FLOODLIGHTS
SHROUDED PROFILE SURFACE MOUNT
(E-GLSP20S1K, E-GLSP30S1K, E-GLSP38S1K)
Accessories
Single Mount Junction Box Cover
Dual Mount Junction Box Cover
For use with octagonal and single gang
junction boxes. Includes adapter plate with
½” knockout for mounting one 120V fixture.
Shown with photocell accessory.
1.5" H x 4.4" dia.
For use with octagonal and single gang
junction boxes. Includes adapter plate with
½” knockout(s) for mounting two 120V
fixtures. Photocell knockout provided.
1.5" H x 4.4" dia.
CAT. # E-GAJB1K
CAT. # E-GAJB2K
2" Conduit Slipfitter
Ground Mount Post
Cast aluminum hub provides threaded entry.
Slips over 2-3/8” O.D. pipe or tenon. 3/8”
allen set screw secures slipfitter.
Wiring or conduit feeds through base of
Ground Mount Post. Use with 2" Conduit
Slipfitter.
Overall: 24" Tube: 18"H x 2.4"DBase: 4.9"W
x 6.3"L
CAT. # E-ACMNH2K
CAT. # E-ACGM1K
Mounting Box with Stake,
Cord & Plug
Cast aluminum box provides enclosed wiring
chamber. Supplied cover gasket ensures
watertight seal. Includes four ½" conduit
entries: top, back and sides.
Stake: 6.5"
Cord: 10' gasketed cord with 120V straight
blade plug
Photocell (120V)
Photocell, field installed for use with single
or dual mount junction box covers.
CAT. # E-ACP1
CAT. # E-GAMNB2K
1 5 0 1 9 6 t h S t r e e t S t u r t e v a n t , W i s c o n s i n 5 3 1 7 7 | ( 8 8 8 ) 2 4 3 - 9 4 4 5 | F a x ( 2 6 2 ) 5 0 4 - 5 4 0 9 | w w w. e – c o n o l i g h t . c o m