WLS LIGHTING SYSTEMS
STANDARD BOLLARD
SPECIFICATIONS
HOUSING - One-piece, seamless, heavy-walled, extruded aluminum. The housing top cap is
die-cast aluminum and seals the crown assembly with a silicone gasket to prevent entry of
moisture and insects. After maintenance or re-lamping, the top cap slides back into place.
The housing is 42” and available and available in Round or Square. Various heights are
available in 6“ increments. Minimum height is 20”.
LENS / GASKET - Both Round and Square Bollard lenses are pure acrylic with .25 inch
minimum wall thickness.
FINISHES - Fixtures are finished with WLS DuraGrip® polyester powder coat finishing process.
The DuraGrip® finish withstands extreme weather changes without cracking or peeling, and
is guaranteed for five full years. Standard colors include bronze, black, platinum plus, buff,
white, satin verde green, graphite, and metallic silver.
DIMENSIONS
SQUARE
6" Sq.
(152mm)
ROUND
6-5/8" Dia.
(168mm)
REFLECTORS / DISTRIBUTION PATTERNS - Indirect and internal louver optics provide a
uniform, symmetrical distribution that yields 360° light dissipation and offers an aesthetically
pleasing visual light source. Lower distributing reflector of spun aluminum provides a wide,
even, glare-free pattern of light. It also conceals the lamp socket. Photometric data is tested
in accordance with IESNA guidelines.
REFLECTORS/DISTRIBUTION PATTERNS
LIGHT SOURCES - High Pressure Sodium, Compact Fluorescent, and Incandescent. Coated
lamp is supplied as standard. Incandescent lamps are to be provided by others.
SOCKETS - Porcelain medium-base sockets on all HID lamp types feature spring-reinforced
42"
(1067mm)
contacts for long life. Compact Fluorescent fixtures fixtures feature a one-piece thermoplastic
socket.
BALLASTS - High-power factor type ballast is designed for -20° operation. Multi-tap ballast
is standard for HID units. Compact Fluorescent ballasts are Electronic Universal Voltage
(120 - 277V 50/60Hz) or 347V (60Hz), 0° F starting.
ANCHOR BOLTS - Requires four 3/8” x 10” galvanized steel anchor bolts.
BASE DETAIL
Note: Base plate dimensions may change without notice.
Do not use for setting anchor bolts. Consult factory for base
plate templates.
Bolt Circle 4 1/2"
(114mm)
Conduit
Opening
2.5" (65mm)
IL OPTIC
ID OPTIC
Anchor Bolt
3/8" X 10"
2" (51mm)
Bolt Projection
®
wet location
Approved By:
Project Name:
Location:
Date:
P.O. Box 100519
Fort Worth, TX 76185
Specifications subject to change without notice.
800.633.8711
Fax: 817.735.4824
www.wlslighting.com
01 Rev. 2/09
STANDARD BOLLARD
ORDERING INFORMATION
SERIES
SBR
DISTRIBUTION
ID - Indirect
IL - Internal Louver
SBS
SELECT APPROPRIATE CHOICE FROM EACH COLUMN TO FORMULATE ORDER CODE. Refer to example below.
Mounting
LAMP
LIGHT
WATTAGE
SOURCE
LENS
LINE
LUMINAIRE
VOLTAGE
FINISH
OPTIONS
ACCESSORIES
BRZ - Bronze
BLK - Black
PLT - Platinum Plus
BUF - Buff
WHT - White
SVG - Satin Verde
Green
GPT - Graphite
MSV - Metallic Silver
CC - Custom Color
H - XX (Specify
Height)
PC - Photocell
GFC - GFCI Duplex
Receptacle
LL - Less Lamp
NO - No Options
GS - Glare Shield
ABKIT - Anchor
Bolt Kit
SF - Single Fusing
DF - Double Fusing
NA - No Accessories
35W
50W
70W
100W
HPS - High Pressure
Sodium
CA - Clear
Acrylic
480V
MT - Multi Tap
TT - Tri-Tap
100W
INC - Incandescent
Max 100 Watts
CA - Clear
Acrylic
120V
26W
32W
42W
CFL - Compact Fluorescent
CA - Clear
Acrylic
UE - Universal
Electronic
(120 - 277V
50 / 60 Hz)
347V
SBR
IL
100
HPS
CA
MT
BRZ
NO
NA
(EXAMPLE ORDER)
ORDER:
WLS-SB
FOOTNOTES:
1 - Coated lamps are supplied as standard.
2 - 35W HPS is available in 120V only.
3 - 50W HPS is not available in T or 347V.
4 - Incandescent lamps are to be provided by others.
5 - 480V is available in 100W HPS only.
6 - Taller or shorter heights are available in 6” increments. Minimum height is 20”.
Maximum height is 60”.
7 - Photocell on 208V, 240V, or 277V fixture is wired to 277V. 208V or 240V photocell
will require field rewiring.
8 - MT - Multi Tap consists of 120V, 208V, 240V, and 277V. Multi Tap is pre-wired for
highest voltage. Alternate voltages will require field re-wiring.
9 - TT- Tri-Tap consists of 120V, 277V, and 347V. Tri-Tap is pre-wired for highest voltage.
Alternate voltages will require field re-wiring.
SHIPPING WEIGHTS - Bollard
Catalog Number Est. Weight (kg/lbs.)
15/34
SBR (42")
15/34
SBS (42")
1/set
Anchor Bolts
1/2
(3/8" x 10")
Approved By:
Project Name:
Location:
Date:
P.O. Box 100519
Fort Worth, TX 76185
800.633.8711
Length (mm/in.)
1149/45.25
1149/45.25
-
Fax: 817.735.4824
Width (mm/in.)
422/16.625
429/16.875
-
Height (mm/in.)
171/6.75
171/6.75
-
www.wlslighting.com
01 Rev. 1/09