8
7
4
5
6
3
2
1
REVISIONS
THIS DRAWING AND ALL INFORMATION CONTAINED HEREIN IS THE PROPERTY OF WELDON TECHNOLOGIES,
INC. AND MAY NOT BE COPIED, REPRODUCED, OR DEVULGED TO UNAUTHORIZED PERSONS WITHOUT THE
EXPRESS WRITTEN CONSENT OF WELDON TECHNOLOGIES, INC. AS IT IS BEING PROVIDED SOLELY FOR THE
CONVENIENCE OF THE USER AND SHALL BE RETURNED TO WELDON TECHNOLOGIES, INC UPON REQUEST.
1.15
8.00
7.50
.41
REV.
ECN
A
R0902
DESCRIPTION
RELEASE FOR PRODUCTION
DATE
BY
--
TB
APVD
MOUNTING INSTRUCTIONS:
1. THIS L.E.D. LAMP ASSEMBLY IS CONSIDERABLY HEAVIER THAN THE INCANDESCENT
OR HALOGEN VERSION. PRECAUTIONS MUST BE MADE TO INSURE THAT THE
MOUNTING SURFACE IS CAPABLE OF SUSTAINING THE LAMP'S WEIGHT IN THE
INTENDED SERVICE ENVIRONMENT.
2. PREPARE THE MOUNTING SURFACE PER THE MOUNTING TEMPLATE DIMENSIONS.
TAKE NOTE OF ANY COMPONENTS BEHIND THE MOUNTING SURFACE PRIOR TO
MAKING ANY CUTS TO THE MOUNTING SURFACE.
3. THIS LAMP PRODUCES HEAT THAT COULD ADVERSELY AFFECT THE LIFE OF THE
PRODUCT. THERE SHALL BE NO INSULATION WITHIN 1" OF THE PERIMETER OF THE
LAMP AND NO INSULATION WITHIN 2" OF THE BACK OF THE LAMP. ADDITIONAL
VENTILATION TO THE BACK OF THE LAMP WILL ENHANCE THE LAMP PERFORMANCE
AND LIFE.
4. THIS LAMP HAS TWO BRIGHTNESS SETTINGS - HIGH AND LOW. THE WIRE COLOR
FUNCTIONS ARE AS FOLLOWS. INPUT VOLTAGE RANGE TO BE 10 - 16 VDC.
RED = HIGH (+)
BLACK = LOW (+)
WHITE = GROUND (-)
THE LAMP CAN DRAW UP TO 1.25 AMPS. VEHICLE WIRING SHOULD BE SIZED
ACCORDINGLY. TYPICAL AMP DRAW AT 14 VOLTS IS 0.75 AMPS FOR "HIGH"
FUNCTION AND 0.075 AMPS FOR "LOW" FUNCTION.
5. OPERATING TEMPERATURE RANGE IS -40C TO +55C (-40F TO +130F).
6. MOUNT THE LAMP USING #8 OR #10 SCREWS. THIS LAMP PROVIDES DIRECTIONAL
LIGHT OUTPUT INTENDED TO MAXIMIZE THE ILLUMINATION OF THE INTERIOR OF
THE VEHICLE. THE LABEL ON THE BACK OF THE LAMP INDICATES THE PROPER
LAMP MOUNTING ORIENTATION. THE ARROW DIRECTION INDICATES THE LONG
AXIS OF THE RECTANGULAR LIGHT OUPTUT.
7. TEST THE HIGH AND LOW FUNCTIONS OF THE LAMP TO VERIFY PROPER
INSTALLATION.
D
8.00
8.63
7.37
C
0B30-2574-00
LAMP HOUSING
STAINLESS STEEL
D
C
MOUNTING HOLE
FOR #8 OR #10 SCREW
V-LED
WHITE: 9900-1201-371
RED: 9900-1201-12
B
7.45
7.40
CLEARANCE HOLE
FOR LAMP BODY
0C10-2313-00
INNER LENS
COVER LENS
CLEAR: 0C20-2401-30
RED: 0C20-2401-10
8.00 MOUNTING
BOLT CIRCLE
MOUNTING TEMPLATE DETAIL
0F20-2317-00
LENS SCREW
0D10-2316-00
LENS GASKET
A
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN mm
TOLERANCES ARE:
X.XX
X.X
-
ANGLES -
0F10-1452-00
LAMP ASSEMBLY SCREW
6
WELDON TECHNOLOGIES, INC.
DATE
APPROVALS
DRAWN
0.5
CHECKED
7/8/09
BARNETT
L.E.D. DOME LAMP ASSEMBLY
SERVICEABLE
CUSTOMER DRAWING
MATERIAL
QUAL ENG
FINISH
MFG ENG
7
A
CAD GENERATED DRAWING,
DO NOT MANUALLY UPDATE
0.15
0.5
DO NOT SCALE DRAWING
8
B
5
4
3
SIZE PART NO.
00163
PROJ. NO.
2
B
SCALE:
NONE
C8049-0000-00
WELDON COMPUTER GRAPHICS SHEET 1
1
REV.
A
OF
1