POINT ROLLOVER LIGHTS
PRL
HELIPORT INSET LIGHT
Compliances:
ETL Listed to UL 1598 Wet Locations at -40 deg C to +55 deg C
ETL Listed to CSA C22.2 No.250.0-04 Canada
Registered ISO 9001:2008
FAA AC 150/5390-2B Heliport Design Guide
ICAO Annex 14, Volume II
The incandescent PRL Point Rollover Light is used for heliport applications where an inset light is
required. The PRL uses long life severe duty lamps and may be relamped without removing the
fixture from its mounting base. The thick glass dome lens passed the impact test per IEC 600790:2007. The lens and cast aluminum lamp housing (optical assembly) are sealed mechanically
without the use of chemical sealants. The light is prewired with cable that enters via a watertight
compression fitting. PRLs may be supplemented with PEL & PSF elevated FATO perimeter lights.
Point Type — Power
PRL-90000
— Color
2: Voltage
Circuits
G:
Y:
B:
R:
C:
— Lamp & Voltage — Mounting & Options
Green
Yellow
Blue
Red
Clear
69A: 69 watts, 120v
40A: 40 watts, 120v
60A2: 60 watts, 230v
116A: 116 w, 120v
116A2: 116 w, 230v
PLB:
DH:
TRH:
GR:
MT:
Base & Gasket
Drain Hole
Tamper R. Hardware
Ground Lug
Marine Treatment
For mounting options & plan details, see file 0MOUNTINGS
PRL-90000-2-G-69A-PLB
For the LED version, see file HL115PRL
SHOWN WITH PLB BASE & GASKET
For NVG tactical use, see LED model file HL115PRL
ETL Control Number:
3030033
Option –MT is recommended for all marine, high salt content air
and other corrosive environments.
The fixture shall be treated for marine conditions by cleaning per US
Department of Defense TT-C-490 method III, pretreated with chrome-free
aluminum conversion coating per US MIL-C-5541 type II, epoxy powder
base coat primer and glossy polyester powder coat finish in color RAL
6003 (FED-STD-595 color #14097) dark green. Powder coating per US
Department of Defense MIL-PRF-24712A type VI and oven cured.
HL-1.2.0 December, 2014
POINT ROLLOVER LIGHTS
PRL
HELIPORT INSET LIGHT
Instruction Sheet: IS90000
Lamp Life:
8000 Hours
Diameter:
Projection:
Depth (base):
Weight:
8.0 (203)
0.7 (18)
10.0 (254)
12 lbs 5.5 kg
RECOMMENDED TOOLS
Replacement Parts & Tools
PL10024-40
PL10024-69
PL10025-60
PL10024-116
PL10523-GA
PL10523-Y
PL10076-PRL
PL10530
PL10531
PL10532
PL10049-4-6
PL10524-118
Lamp 40w, 120v
Lamp 69w, 120v
Lamp 60w, 230v
Lamp 116w, 120v
Lens, Green Incandescent
Lens, Yellow
Socket, Lamp PRL
Gasket, Lens Upper
Gasket, Lens Lower
Gasket, Lamp Housing
Gasket, Base
Screw, Socket Head
PL10701-X
Spacer Ring x/8-inch
PL10655
PL10860
PL10839
Tool, option -TRH
Tool, T-handle wrench
Tool, preset torque
wrench kit
Point Lighting Corporation recommends return for factory repair and refurbishment of LED
PRL lights. In the event of field service, the PL10839 preset torque wrench kit use with the
instruction manual is recommended to assure proper resealing of the fixture.
PL10839
Tool, Preset Torque Wrench Kit
PL10860
Tool, T-handle Wrench
For the socket head screws fixing the
PRL lens clamp ring and for fixing the
power supply subassembly.
Consult the factory and the manual
before attempting field repair.
For the three socket head screws
fixing the PRL fixture to the PLB
mounting base.
POINT LIGHTING CORPORATION
Mail: P.O. Box 686, Simsbury, CT 06070
Plant: West Dudley Town Rd, Bloomfield, CT
Tel 01 860.243.0600
USA
Fax 01 860.243.0665
email: Info@PointLighting.com
website: www.PointLighting.com