Pressure sensing mat safety module NT12D • Safety Category 3 together with SM Safety mats according to EN 954-1 • Redundant and self monitoring circuit • Mat integrity monitoring • Four wire input • Feedback circuit for external contactors monitoring • Manual or automatic restart • Failure diagnosis by LEDs • Approval: TÜV NORD Product Description Ordering Key Pressure sensing mat safety module in conformity with EN 954-1, EN 60904-1, EN 292-1,/2 and EN 1760-1. The module has been designed to be employed along with the SM.. Safety mat; this safety system Housing Application Controlled Devices Safety Outputs Safety Category constitute an effective and reliable safety package of Safety Category 3. The module is provided with safety ouput contacts with force guided relay contacts, four wire input and manual or automatic restart. NT12 D Electrical Specifications Power supply Power consumption Safety outputs Auxiliary outputs Contact ratings Resistive loads AC1 DC12 Small inductive loads AC15 DC13 24 VAC ± 10% 50-60Hz / 24 VDC ± 10% 5 VA / 5 W 2 NO -6 A @ 230 VAC 6 A @ 24 VDC 1.5 A @ 230 VAC 1.2 A @ 24 VDC Time Specifications Delay on energisation Delay on de-energisation Recovery time Channel simultaneity Safety output contact fuse protection Insulation voltage Supply to input Supply to output Input to output 4 A fast or 1 A delayed none 4 kV 1.2/50µs 4 kV 1.2/50µs Pollution degree 2 Overvoltage category III Environmental Specifications 2 sec ± 15% ≤ 150 ms (NT12D+SM) ≥ 150 ms ∞ Operating temperature Storage temperature 0°C ... + 55°C -25°C ... + 55°C Mechanical Specifications Protection degree terminals Protection degree housing Housing material Housing type Mounting IP 20 IP 30 ABS 22.5 mm housing models DIN rail Specifications are subjected to change without notice (23.04.07) Max cross section of external conductors Dimensions Weight 2.5 mm2 flexible wire 4 mm2 rigid wire 22.5 x 84 x 100 mm 160 g 1 NT12D Dimensions 22,5 84 84 100 Wiring Diagrams Application SM-.. safety mat +24 Vdc/Vac T11 T12 T21 T22 NT12D V+ V- Connection Sample Connections Terminal A1 A2 S1-S2 NT12D 13-14 23-24 T11-T12 T21-T22 Function/Connection +24 VDC or AC supply GND or AC supply START (automatic o manual) and feedback input for external contactors monitoring First safety output (NO) Second safety output (NO) Safety mat layer 1 inputs Safety mat layer 2 inputs Front NT12D 2 Specifications are subjected to change without notice (23.04.07)