Say Goodbye To Dropped Calls
PRODUCT CATALOG
Improving Your Cellular Signal with the World’s Best-Performing
and Most Powerful Cell Phone Signal Boosters and Antennas
2011
ENGINEERING • EXPERIENCE • EXPERTISE • PERFORMANCE
CONTENTS
Headquartered in St. George, Utah
PAGE
Company Profile
Table of Contents / Warranty Information
1
Problem: Dropped Calls / Solution: Wilson Electronics
2,3
Stay Connected On the Go / Stay Connected Indoors
4,5
BOOSTERS
Wilson Electronics, Inc. designs, manufactures and sells cell phone signal boosters, antennas and
other components that extend and improve wireless service coverage indoors and on the go. Wilson’s
boosters and antennas solve the problems of dropped calls, lost data and transmission quality issues
that users routinely experience on every wireless network. Wilson’s products currently operate in the
frequency ranges on all major systems in the U.S., Canada, Europe, and Latin America and amplify
transmissions for all mobile phones and laptop data cards. Wilson sells its products using a two-tier
distribution system to a growing market of consumers, mobile professionals and truckers through a
network of more than 5,000 specialty retail and carrier stores in the U.S., Canada, Latin America and
other locations around the globe.
6
Sleek™ Cell Phone Signal Booster
7
Frank Iglesias, EET
Bachelor of Science degree
in Electrical Engineering
Technology
Robert Richey, EET
Bachelor of Science Degree
in Electronics Engineering
Technology
Mechelle Wylie, MS, ME
Master of Science,
Microelectronics
Manufacturing Engineering
Colin Clark, EET
Bachelor of Science degree
in Electrical Engineering
Technology
www.wilsonelectronics.com
Patrick Cook, EE
Bachelor of Science degree
in Electrical Engineering
Vlad Skrypnyk, EE
Graduated from the Kharkiv
Technical University of
Radio Electronics
Lisa Stewart, IE
Bachelor of Science degree
in Industrial Engineering
Tereasa Day, EET
Bachelor of Science degree
in Electrical Engineering
Technology
Oscar Zumarta, EE
Bachelor of Science degree
in Electrical Engineering
Weston Johnson, EE, CE
Bachelor of Science degree
in Electrical Engineering &
Computer Engineering
Chris Ashworth, MSEE
Master of Science degree
in Electrical Engineering
Russell Jones
U.S. Army
Military Intelligence,
Electronic Warfare
Chelsey Smith
Computer Programming Tech
Associates Degree in
computer networking
Toll Free 1-866-294-6996
Recreational Vehicles
Residential Buildings
Mini-Mobile Dual-Band Wireless Booster
8
Industrial / Commercial Buildings
SIGNALBOOST™
MobilePro™ Dual-Band Wireless Booster
9
Marine Craft
SIGNALBOOST™
HDMobile™ Wireless Single & Dual-Band Boosters
10,11
SIGNALBOOST™
HDSOLO™ Dual-Band Boosters
12,13
Warranty Information
Cradle Booster™ Wireless Booster/Chargers
14,15
30-Day Money-Back Guarantee
Building Solutions
16
Building Wireless Cellular Boosters
17
All Wilson Electronics products are protected by a 30-day money-back
guarantee. If for any reason the performance of any product is not
acceptable, the product may be returned to the reseller with a dated
proof of purchase.
18
Signal Booster Warranty
DB Pro Building Wireless Cellular Booster (75ohm)
Small Office / Home Office (SOHO) Wireless Booster
Richard “Riki” Kline, EE
Bachelor of Science degree
in Electrical Engineering
Commercial Vehicles
SIGNALBOOST™
SIGNALBOOST™
Alan Van Buren, EE
Bachelor of Science degree
in Electrical Engineering
Passenger Vehicles
Utility Vehicles
Mobile Solutions
SIGNALBOOST™
ENGINEERING TEAM
Symbol Index
DT Dual-Band 800/1900 MHz Desktop Booster
19
Wilson Electronics’ signal boosters are warranted for one (1) year
against defects in workmanship and/or materials.
20
Antenna Warranty
AG Pro 75™ Cellular Booster
21
M2M
22
DataPro™ Direct Connect Cellular Booster
23
Direct-Connection Boosters
24,25
Mobile Plug and Play Kits
26,27
ANTENNAS
High-Gain Antennas
28,29
General Vehicular External Antennas
30,31
Low Profile & Ultra-Slim Antennas
32
Cradle Plus Antennas
33
Yagi Antennas
34
Building Antennas
35
Wilson Electronics’ antennas are warranted for one (1) year against
defects in workmanship and/or materials. (Trucker antennas are
warranted for one year.)
Warranty cases may be resolved by returning the product directly to the
reseller with a dated proof of purchase. Signal boosters and antennas
may also be returned directly to the manufacturer, at the consumer’s
expense, with a dated proof of purchase and a Returned Material
Authorization (RMA) number supplied by Wilson. Wilson shall, at its
option, either repair or replace the product and will pay for delivery of
the repaired or replaced product back to the original consumer within
the U.S.
These warranties do not apply to any products determined by Wilson
Electronics to have been subjected to misuse, abuse, neglect or
mishandling that alters or damages physical or electronic properties.
RMA numbers may be obtained by phoning Technical Support at
866-294-1660.
OTHER PRODUCTS
Antenna Adapter Type Descriptions
36
Mounts and Replacement Parts
37
Taps, Splitters, Lightning Protection, Combiner/Diplexer
38
Connectors & Crimp Connectors
39
Coaxial Cables
40
Portable Booster Vented Soft Carrying Case
40
Power Supplies
41
www.wilsonelectronics.com
1
Toll Free 1-866-294-6996
The Problem: Dropped Calls
Everyone who uses a cell phone or data card knows how
aggravating it is to drop a call or not be able to connect.
Fortunately, Wilson Electronics has the solution! Our industryleading cell phone signal boosters and antennas enable
you to connect and maintain calls by improving your cellular
signal at home, at work and on the go. Wilson Electronics
keeps you connected!
The Solution: Wilson Electronics Products
Boost Your Cellular Signal
Wilson Electronics cell phone boosters eliminate the frustration of dropped calls, limited range and
slow data rates by amplifying incoming and outgoing cellular signals in both mobile and building
situations. With a reputation as the finest in the business, our bi-directional boosters and antennas
are expertly engineered to detect and amplify weak incoming signals your cellular device would
miss, and simultaneously broadcast a much stronger signal back to the cell tower.
Product testing proves that Wilson boosters lead the industry with:
Reasons for Dropped Calls and Slow Data Rates
• The highest receiver sensitivity: Captures weak and distant cellular signals
• The highest power output: Reaches distant cell towers
•M
icroprocessor-controlled circuitry: Patented technology that
protects cell towers
1. Location of the Nearest Cell Tower
Distance plays the biggest role in limiting
cellular communications, especially in rural areas. The farther you are from a cell
tower, the weaker your signal will be.
Wilson’s wide range of plug-and-play packages and individual
products for custom installations offer great value and ensures
reliable cellular communication at work, at home and on the go.
2. Natural and Man-Made Obstructions
Hills, trees, valleys and buildings all interfere with the quality of the cellular signal
between your phone or data card and
the cell tower. Stucco and concrete walls
used in homes, offices and other buildings
block cellular signals, making it difficult to
receive a strong cellular signal. You may be
relatively close to a cell tower but unable to
connect because of obstructions.
For stranded motorists and emergency services personnel, the inability to
make a cell phone call can mean the difference between life and death.
Stay connected
in buildings
For people who rely on their cell phone or data card for business, it can
affect the outcome of important business decisions or relationships.
Stay connected
in trouble spots
Stay connected
in trouble spots
Man-Made Obstruction
(Metal/Concrete Structure)
www.wilsonelectronics.com
2
Toll Free 1-866-294-6996
Man-Made Obstruction
(Metal/Concrete Structure)
The Sleek™
815226
Stay connected up to
6 times farther with a
Wilson signal
booster
Natural Obstructions
www.wilsonelectronics.com
from cell tower
3
Toll Free 1-866-294-6996
Stay Connected On The Go
CAR
TRUCK
RV
Stay Connected Indoors
EMS
BOAT
HOME
APARTMENT
SMALL OFFICE
HIGH RISE
WAREHOUSE
Mobile Solutions
Building Solutions
Whether you’re traveling on land or at sea, Wilson Electronics keeps you connected!
Wilson Electronics offers a full line of high-performance building signal boosters and
antennas to give you a strong, reliable cell phone signal indoors.
1
Wilson Electronics manufactures powerful mobile wireless and direct-connection cell
phone signal boosters for all carrier frequencies (Cellular, PCS, and Nextel/iDEN), as
well as high-gain antennas with magnet, mirror, glass, and permanent mounts. In a
wireless installation, which requires no physical connection between the cell phone
and signal booster, the exterior antenna collects weak cellular signals and sends
them to the booster. The booster amplifies those signals and rebroadcasts
them to cell phones and data cards in the vehicle through the interior
antenna. The process is then reversed and the
amplified signals from the cell phone or
data card are transmitted back to
the cell tower.
2
3
2
3
Wilson Electronics manufactures building signal boosters and antennas to improve cell
phone performance in a single room, an entire home, a large warehouse, or a
multi-story office building. A typical wireless building system includes an
exterior antenna that detects weak
cellular signals and sends them to
the booster. Powered through a
1
standard wall outlet, the booster
amplifies those signals and sends them
to
the
inside
antenna, which communicates
4
the stronger signal to cell phones and data
cards indoors. When a cell phone or data card
transmits, the process is reversed.
Typical Wireless Installation
1. Exterior antenna
2. MobilePro™ Signal Booster
3. Power Adapter
SIGNALBOOST™ HD Mobile™ 801212
SIGNALBOOST™ MobilePro™ 801241
SIGNALBOOST™ HDSolo™ 811214
The perfect choice for the user looking
to improve cellular signals for a single cell
phone or data card. Includes SIGNALBOOST™ amplifier, exterior Magnet Mount
antenna and interior Cradle Plus antenna.
The MobilePro can be easily moved from
vehicle to building making it great for
cars, hotels, airports and offices. Includes
the MobilePro booster, exterior Magnet
Mount antenna and multiple mounting
options and power supply options.
Wilson Electronics most popular mobile
signal booster combines with the exterior
Magnet Mount antenna and interior Low
Profile antenna for a high performance
multi-user option.
SUPPORTS
SINGLE
USER
www.wilsonelectronics.com
SIGNALBOOST™ DB Pro™ 841262
SOHO 841245
Features an exterior high gain omni directional antenna (eliminates aiming the antenna), the interior panel antenna, and the
booster. Includes everything needed for
simple installation.
SUPPORTS
ONE ROOM
4
Toll Free 1-866-294-6996
The DB Pro was designed for simple installation using standard TV cable often prewired in homes. Also includes the interior
panel antenna, high gain DB Pro booster,
cable and an external omni directional
antenna.
Both of these powerful signal booster
plug-and-play kits include an exterior Yagi
antenna, coax cable and an Interior panel
antenna.
SUPPORTS
LARGE
BUILDINGS
SUPPORTS
WHOLE
HOUSE
www.wilsonelectronics.com
Building Single Band Wireless Kits
841165 / 841365
5
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
Sleek™ Cellular Signal Booster
815226
MOBILE SOLUTIONS
800/1900 MHz
Wilson Electronics
FEATURES
__________________________________________________
•Portable – can easily be moved between vehicles
•Reduces dropped calls, extends signal range, and increases
data rates
•Amplifies signals to and from cell tower
•Up to 20 TIMES more output power to cell tower (when in a
vehicle)
•Receives weak signals the phone alone may not
•Built-in battery charging port (adapters sold separately)
•Extends battery life – Booster enables phone to work at
reduced power
•Adjustable arms to fit any phone
•Simplifies hands free operation
•Installs in minutes – no special tools required
•Package includes everything needed -- plug-and-play
•Attractive, compact design
SPECIFICATIONS
___________________________________________
Part Number
Frequency
815225
824-894 MHz / 1850-1990 MHz
Gain
20 dB
31.8 dBM
Noise Figure
3.0 dB nominal
Flatness
±4 dB
Isolation
> 40 dB
5V
Connectors
SMA Female
Dimensions
2.25 x 4.25 x 2.5 (inch) 5 x 9.5 x 5.6 (cm)
2.5 (oz) / 0.07 (kg)
The Wilson Electronics’ Sleek Signal Booster kit (815226) includes:*
• Sleek™ all-in-one cradle and signal booster
• Outside vehicle mini magnet-mount antenna
• Power adapter**
• 30-day money-back guarantee
• One-year product warranty
* In-Home accessory kit (859970) available
** Use only with Wilson power supply
INSTALLATION
_________________________
Outside Antenna
Mini Magnet
Mount
S I G N A L
WILSON ELECTRONICS HAS A SOLUTION
FOR EVERY SITUATION!
Power
adapter
6
Toll Free 1-866-294-6996
www.wilsonelectronics.com
7
Toll Free 1-866-294-6996
B O O S T E R
Sleek™
Signal
Booster
www.wilsonelectronics.com
P H O N E
Weight
Wilson Electronics new Sleek™ improves both voice and data
performance indoors. With 20 times the power to the cell
tower of a cell phone alone, it features a built-in antenna,
battery charging port and works with Cellular (800 MHz) and
PCS (1900 MHz) frequencies.
C E L L
Power Requirements
_______________________________________________________
S L E E K ™
Max Output Power
KIT
801230
Say Goodbye to Dropped Calls
Mini-Mobile™
Dual-Band Cellular Booster
800/1900 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
MobilePro™ Dual-Band
Cellular Booster
SIGNALBOOST
SIGNALBOOST
™
™
FEATURES
FEATURES
• Installs in minutes – no special tools required
Ideal for laptop data cards – can be powered by USB port.
• Portable – can easily be moved between vehicles
• Portable – can easily be moved from vehicle to building
• Wireless operation - no physical connection to cell phone or data card
• Installs in minutes – no special tools required
• Supports multiple users in vehicle
• Features a built-in interior antenna
• Amplifies signals to and from the cell tower
• Multiple power options - USB port, DC power supply (cigarette lighter
type) or AC adapter
__________________________________________________
__________________________________________________
• Microprocessor-controlled circuitry ensures reliable operation within
regulatory standards
• Wireless operation – no physical connection to cell phone or data card
• Improves signals for both voice and data
• Microprocessor-controlled circuitry ensures reliable operation within
regulatory standards
• Many times more power than a typical cell phone
• Oscillation protection and shutdown auto reset
• DC power supply included (cigarette lighter type), AC power supply
sold separately
• FCC and IC Type Accepted
• Oscillation protection and shutdown auto reset
KIT OPTIONS
W I R E L E S S
Frequency
801230
824-894 MHz / 1850-1990 MHz
Gain
40 dB / 42 dB
Max Output Power
1.7 watts
Max RF Output
(down)
+8 dBm
Noise Figure
________________________________________________________
Designed to satisfy the needs and preferences of different users, the MiniMobile is available in a plug-and-play kit with various options for interior
and exterior antennas.
SEE KIT COMPONENTS ON PAGE 26 & 27
Part Number
3.5 dB nominal
Flatness
±5 dB
Isolation
>90 dB
Power
Requirements
SMA Female
Dimensions
3.25 x 3.25 x 1 (inch)
9.6 x 8.1 x 3.8 (cm)
Weight
4 (oz) / 0.11 (kg)
_______________________________________
Part Number
Frequency
Gain
Interior Antenna
Exterior Antenna
801230
Ultra-Slim*
Purchased Separately
801232
Ultra-Slim*
12” Magnet Mount
0* Wilson’s Ultra-Slim Antenna enables discreet installation.
Max Output Power
Max RF
(uplink/downlink)
Noise Figure
Flatness
Isolation
Power
Requirements
Connectors
6V
Connectors
SPECIFICATIONS
Dimensions
INSTALLATION
__________________________________________________
Magnet Mount
Shown
Weight
801240
824-894 MHz / 1850-1990 MHz
40 dB / 42 dB
SEE KIT COMPONENTS ON PAGE 26 & 27
1400 mW
+8 dBm
Part Number
3.5 dB nominal
±4 dB
> 90 dB
5V — 8V
SMA Female
Purchased Separately*
801241
12” Magnet Mount
801242
4” Mini Magnet Mount
859952
Home Accessory Kit
_________________
Window Mount
Exterior Antenna
Magnet Mount
Shown
Power
adapter
MobilePro
Signal
Booster
Toll Free 1-866-294-6996
www.wilsonelectronics.com
9
Toll Free 1-866-294-6996
A M P L I F I E R
8
801240
INSTALLATION
3 (oz) / 0.09 (kg)
Mini-Mobile
Wireless
Booster
www.wilsonelectronics.com
Exterior Antenna
2 x 4.75 x 1 (inch) 5.1 x 12.1 x 2.5 (cm)
Power
adapter
Wireless Operation
No Physical
Connection
to Cell Phone
Wilson Electronics SIGNALBOOST™ MobilePro™ improves cell phone and data
card performance on the road, in airports, hotels and office buildings. With 2
times the output power of a typical cell phone, it features a built-in antenna,
supports multiple phones and data cards, works with Cellular (800 MHz) and
PCS (1900 MHz) frequencies, and offers multiple power options (USB port,
vehicle power adapter or standard AC outlet). The MobilePro™ is available
in 2 plug-and-play kits to meet specific user needs.
W I R E L E S S
D U A L - B A N D
Part Number
KIT OPTIONS
P R O F E S S I O N A L
M I N I - M O B I L E
_______________________________________
________________________________________________________
M O B I L E
A M P L I F I E R • FCC and IC Type Accepted
SPECIFICATIONS
801240 800/1900 MHz
Wilson Electronics
801101 / 801201 / 804002
Say Goodbye to Dropped Calls
HDMobile™ Cellular Single &
Dual-Band Boosters Professional Series
SIGNALBOOST™
FEATURES
__________________________________________________
MOBILE PROFESSIONAL SERIES INSTALLATION DIAGRAM
_____________________________________________________________________________________________
801101 / 801201 / 804002 800 iDEN • 800/1900
Wilson Electronics
• Oscillation detection and shutdown with auto reset
• No physical connection to your cell phone or cellular data card
• Works on all generations of CDMA, TDMA, GSM, and 3G
• Passes TIA/EIA-98-E transmit tests for evaluating CDMA cellular phones
• Power control logic ensures maximum gain is within cellular standards
Outside Antenna
Magnet Mount Shown
• Allows multiple phones and cellular data cards to be used simultaneously
DUAL-BAND
• Maximum 3 watts output power
• Overload protection circuit – protects cell system from overload
• Automatic reset – if overload occurs
Inside
Antenna
Low Profile
Shown
• FCC and IC type accepted
Power
adapter
SINGLE-BAND
Mobile
Wireless
Booster
SPECIFICATIONS
801201
824-894 MHz
824-894 MHz / 1850-1990 MHz
806-869 MHz
40 dB
40 dB / 45 dB
40 dB
Max Output Power
2140 mW
2820 mW
30.2 dBm
Max RF (downlink)
+10 dBm
+10 dBm
+10 dBm
3.5 dB nominal
3.5 dB nominal
3.5 dB nominal
Flatness
±3 dB / ±4 dB
±3 dB / ±4 dB
±3 dB / ±3 dB
Isolation
> 90 dB
> 90 dB
> 90 dB
Power
Requirements
12 V, 0.5-1.5 A max
6 V, 3 A max
12 V, 0.5-1.5 A max
Connectors
FME-Male 50 ohms
FME-Male 50 ohms
FME-Male 50 ohms
Dimensions
5.5 x 4.3 x 1.4 (inch)
14.0 x 10.8 x 3.5 (cm)
4.5 x 3.5 x 1.25 (inch)
11.43 x 8.9 x 3.2 (cm)
5.5 x 4.3 x 1.4 (inch)
14.0 x 10.8 x 3.5 (cm)
1.32 lbs / 0.6 kg
1.5 lbs / 0.7 kg
1.32 lbs / 0.6 kg
Frequency
Gain
Noise Figure
Weight
M O B I L E
W I R E L E S S
801101
Part Number
iDEN Single-Band 800 MHz
KIT
804002
ANTENNA OPTIONS
__________________________________
• NMO Antenna
• Mini Magnet Mount Antenna
• Magnet Mount Antenna
• Trucker Antenna
• More listed on pages 30-35
Mobile Cellular Amplifiers –
Peak Performance on the Road
__________________________________________________
From road warriors to truckers to soccer moms, thousands
of drivers depend on Wilson Electronics Mobile Cellular
Boosters to stay connected around town and on the open
highway. These powerful boosters enable cell phone
and data card users to extend their signal range, reduce
dropped calls, and increase data rates with no physical
connection to cell phone or data card. And, because
they’re wireless, these boosters support multiple users
simultaneously.
KIT = Best Seller
KIT = Available in Plug-and-Play kit (Page 26)
www.wilsonelectronics.com
10
Toll Free 1-866-294-6996
www.wilsonelectronics.com
11
Toll Free 1-866-294-6996
A M P L I F I E R S
Dual-Band 800 / 1900 MHz
W I R E L E S S
Single Band 800 MHz
M O B I L E
A M P L I F I E R S ______________________________________________________________________________________________
811210 / 811710 / 811910
Say Goodbye to Dropped Calls
SIGNALBOOST™
HDSOLO™ Dual-Band Cellular Boosters
FEATURES
____________________________________________________
HOME/OFFICE INSTALLATION DIAGRAM (OPTIONAL SET-UP SHOWN BELOW)
811210 / 811710 / 811910
800/1900 • 900/1800 • 900/2100 MHz
Wilson Electronics
_____________________________________________________________________________________________
Inductively couples to phone and all cards with Ultra-Slim
antenna - no adapter required. Operates similar to direct
connection signal boosters.
• Works with all Cellular/PCS cell phones and laptop data cards (except iDEN)
• Connects to ALL phones and data cards with a Universal Ultra-Slim
Antenna using a Velcro® patch
• No plug-in phone adapter needed
• Up to 10 times more power than your cell phone or laptop data card
Cell Phone
Connection
Laptop
Connection
• Significantly improves voice and data signal quality
• Increases data communication rates needed for 3G technologies
SIGNALBOOST™
SIGNALBOOST™
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Works great in mobile, building and marine applications
• Easy to install and use
• Works on all generations of CDMA, TDMA and GSM
• Up to 3 watts maximum power
W I R E L E S S
KIT = Available in Plug-and-Play kit (Page 26)
SPECIFICATIONS
______________________________________________________________________________________________
Part Number
Frequency
811210
KIT
824-894 MHz
1850-1990 MHz
KIT
811710
890-960 MHz
1710-1880 MHz
Gain
2700 mW
Max RF (downlink)
+10 dBm
Noise Figure
3.5 dB nominal
Flatness
±2 dB / ±2 dB
Isolation
> 50 dB
KIT
Attach the Velcro®
Universal Ultra-Slim
Antenna to the
back of your cell
phone, data card
or MiFi device
Antenna
12 V DC / 2 A max
Connectors
FME-Male 50 ohms
Dimensions
5 x 3.5 x 1.2 (inch) / 12.7 x 8.9 x 3 (cm)
A M P L I F I E R S
Power
Adapter
Power
Requirements
Weight
_____________________________________________________________________________________________
890-960 MHz
1885-2200 MHz
25 dB / 25 dB
Max Output Power
(uplink)
www.wilsonelectronics.com
811910
MOBILE INSTALLATION DIAGRAM
SIGNALBOOST™
1.03 lbs / 0.468 kg
12
Toll Free 1-866-294-6996
www.wilsonelectronics.com
W I R E L E S S
S I G N A L B O O S T ™
= Best Seller
S I G N A L B O O S T ™
A M P L I F I E R S • FCC and IC type accepted
13
Toll Free 1-866-294-6996
805201 / 805206 / 805221
Say Goodbye to Dropped Calls
Cradle Booster Cellular Boosters
(with cell phone chargers)
FEATURES
MOBILE INSTALLATION DIAGRAM
___________________________________________
_____________________________________________________________________________________________
805201 / 805206 / 805221 800/1900 MHz
Wilson Electronics
•Installs in seconds – no special tools required
•Signal booster features a built-in interior antenna and
battery charging capabilities
• Increase phone’s voice and data performance in
weak signal areas
Mini Magnet
Mount Shown
•Amplifies signals to and from cell tower
Power
adapter*
•Can be used for “Hands Free” operation
•Microprocessor-controlled circuitry ensures reliable
operation within regulatory standards
U-Booster™
Universal
805221
•Oscillation protection and shutdown auto reset
SPECIFICATIONS
______________________________________________________________________________________________
Part Number
805201
805206
805221
824-894 MHz
1850-1990 MHz
824-894 MHz
1850-1990 MHz
824-894 MHz
1850-1990 MHz
40 dB / 42 dB
40 dB / 42 dB
40 dB / 42 dB
Max Output Power
1400 mW
1400 mW
1400 mW
Max RF (downlink)
-20 dBm
-20 dBm
-20 dBm
3.5 dB nominal
3.5 dB nominal
3.5 dB nominal
Flatness
±4dB
±4dB
±4dB
Isolation
> 90 dB
> 90 dB
> 90 dB
12V*
12V*
12V*
Connectors
SMA Female
SMA Female
SMA Female
Dimensions
2 x 4.75 x 1 (inch)
5.1 x 12.1 x 2.5 (cm)
2 x 4.75 x 1 (inch)
5.1 x 12.1 x 2.5 (cm)
2 x 4.75 x 1 (inch)
5.1 x 12.1 x 2.5 (cm)
3 (oz) / 0.09 (kg)
3 (oz) / 0.09 (kg)
3 (oz) / 0.09 (kg)
Frequency
Gain
Noise Figure
Power
Requirements
Weight
www.wilsonelectronics.com
14
Toll Free 1-866-294-6996
KIT
ANTENNA OPTIONS (Pages 28-33)
____________________________________________
Wilson Electronics new cradle boosters improve
both voice and data performance. With 20 times
the power to the cell tower of a cell phone alone,
they feature a built-in antenna, battery charger
and work with Cellular (800 MHz) and PCS (1900
MHz) frequencies.
• NMO Antenna
The cradle booster kits include:
• RV Antenna
________________________________________________
• Mini Magnet Mount Antenna
• Magnet Mount Antenna
• Trucker Antenna
• Marine Antenna
• Outside vehicle magnet-mount antenna
A M P L I F I E R / C H A R G E R S
W I R E L E S S
iBooster™ for
iPhone™
805201
• Power adapter*
• 30-day money-back guarantee
• One-year product warranty
*Use only with Wilson power supply
www.wilsonelectronics.com
15
W I R E L E S S
B O O S T E R
Cradle
Booster &
Phone Charging
Capabilities
B O O S T E R
C R A D L E
C-Booster™ for
BlackBerry® Curve™
805206
C R A D L E
A M P L I F I E R / C H A R G E R S •Home accessory kits available
Toll Free 1-866-294-6996
Say Goodbye to Dropped Calls
Building Cellular Boosters
Professional Series
Versatile, Powerful Wireless Signal Boosters
for use in Homes, Offices and other Buildings
____________________________________________________________________
The performance of cell phones and laptop data cards can be compromised
in many buildings due to concrete, stucco, or metal walls that block the
cellular signals coming in and going out. To remedy that problem, Wilson
Electronics offers a complete line of Building Wireless Signal Booster.
Available in 50dB and 60dB models, and covering various frequency ranges,
these indoor signal boosters support multiple cell phones and data cards
simultaneously and are compatible with a wide variety of Wilson indoor and
outdoor antennas. The result? A strong, reliable cell signal where you need it,
at home or at work.
Supports Multiple
Users
INSTALLATION
_________________________________________________________
FEATURES
________________________________________________________________
SMALL AREA OR
DESKTOP SOLUTIONS
LARGE AREA OR
MULTIPLE ROOM SOLUTIONS
Building
Wireless
Signal
Booster
AC Power Supply
Outside Antenna
Yagi Antenna Shown
Dome
Antenna
Wireless Operation
No Physical Connection
to Cellular Devices
B U I L D I N G
• Works with all cell phones and laptop data cards
• Significantly improves voice and data signal quality
• Receives and transmits better than your cell phone
• Extends cell phone battery life
• Works on all generations of CDMA, TDMA, GSM and high-speed
data technologies.
• Improves data communication rates needed for 3G technologies
• Automatic gain control up to 50 dB
• 2 dB gain step 30-50 dB and 40-60 dB
• Automatic gain adjusting in the event of oscillation and/or
overload.
• Gain indicator lights
• Automatic shutdown on overload
• Up to 3-watt power amplifier
• Power control logic ensures maximum output power is within
cellular network standards
• Oscillation protection and shutdown auto reset
• FCC and IC type accepted
SPECIFICATIONS
______________________________________________________________________________________________
801105
801165
801108
801110
A
B
60 dB
60 dB
Channel
Gain (Rx/Tx)
Frequency
Max Output Power
50 dB
65 dB
824-849 MHz
869-894 MHz
824-835 MHz 835-849 MHz
869-880 MHz 880-894 MHz
16
50 dB
60 dB
806-824 MHz
851-869 MHz
1000 mW
801506
801606
60 dB
880-915 MHz
925-960 MHz
1710-1785 MHz
1805-1880 MHz
EXPORT ONLY
500 mW
3 dB nominal
4 dB nominal
3 dB nominal
3 dB typical
Flatness
±2.5 dB
± 4 dB
±2.5 dB
±4 dB
Isolation
> 90 dB
Power Requirements
Toll Free 1-866-294-6996
65 dB
1600 mW
> 90 dB
6 V DC, 3 A max
Connectors
N-Female 50 ohms
Dimensions
5.6 x 3.6 x 1.7 (inches) 14.2 x 9.1 x 4.4 (cm)
Weight
www.wilsonelectronics.com
804006
www.wilsonelectronics.com
1.5 lbs / 0.7 kg
17
= Best Seller
Toll Free 1-866-294-6996
A M P L I F I E R S
MEDIUM AREA OR
SINGLE ROOM SOLUTIONS
804005
1850-1990
MHz
Max Downlink Power
Noise Figure
801365
W I R E L E S S
Part Number
801105 / 801165 / 801108 / 801110 / 801365 / 804005 / 804006 / 801506 / 801606
BUILDING SOLUTIONS
800 • 800 iDEN • 900 • 1800 • 1900 MHz
Wilson Electronics
801262
Say Goodbye to Dropped Calls
Building Wireless Cellular Booster
SIGNALBOOST
DB Pro (75ohm)
A M P L I F I E R S For users needing improved cellular performance in a small
office or home office environment, Wilson Electronics SOHO
amplifier is a great solution. Offering dual-band (800/1900 MHz)
compatibility, the wireless SOHO booster supports multiple cell
phones and data cards simultaneously. It can be paired with a
wide variety of Wilson indoor and outdoor antennas for a truly
customized system. Depending on outside signal strength, the
SOHO can improve cellular strength in a single room or an entire
home.
Part Number
Frequency
Gain
34 dBm / 15.7 dBm
*841263 includes optional
±5 dB
Isolation
> 90 dB
Frequency
Outside Antenna
Omni Antenna Shown
DB Pro
Wireless
Amplifier
Dimensions
6.2 x 4.2 x 1.5 (inch)
15.7 x 10.7 x 3.8 (cm)
www.wilsonelectronics.com
Max RF (up/down)
31.1 dBm / +10 dBm
18
Toll Free 1-866-294-6996
Outside Antenna
Optional Yagi Antenna Shown
(Sold Separately)
Inside Antenna
Optional Dome
Antenna Shown
(Sold Separately)
3 dB / 4 dB nominal
Flatness
±5 dB
Isolation
> 90 dB
AC Power
Supply
Cell phone, PDA, or
notebook
6 V AC / 3 A max
Connectors
FME-Male 50 ohms
Dimensions
5.6 x 3.6 x 1.7 (inch) / 14.2 x 9.1 x 4.4 (cm)
Weight
Parts Included
Bi-Directional Signal Booster
AC Power Supply
50 dB / 50 dB
1200 mW
Noise Figure
Panel
Antenna
*Weight and dimensions are for amplifier
only, for total kit weight contact your Wilson
Electronics sales representative.
824-894 MHz / 1850-1990 MHz
Max Output Power
Power
Requirements
*0.64 lbs / 0.29 kg
Weight
Gain
801245
INSTALLATION
_________________________________________________________
1.5 lbs / 0.7 kg
www.wilsonelectronics.com
Wireless operation - no physical connection to cell phone or cellular data card
19
Toll Free 1-866-294-6996
A M P L I F I E R
F-Female
Wireless Operation
No Physical
Connection
to Cell Phone
AC Power
Supply
120-240V AC, 50-60 Hz,
8W
Connectors
SPECIFICATIONS
_____________________________________________________
Part Number
3.5 dB nominal
Flatness
Power Requirements
841262
INSTALLATION
Yagi antenna
_________________________________________________________________
62 dB / 62 dB
Max RF (up/down)
Noise Figure
• Works on all generations of CDMA, TDMA, GSM and 3G technologies
• For 800 MHz Cellular and 1900 MHz PCS Bands
• Indicator lights
• Receiver sensitivity -110 dBm CDMA
• AC power supply included
• FCC and IC type accepted
• Oscillation detection and gain reduction
• 3-watt power amplifier
•Optional kit available (841245)
801262
2.5 watts
SUPPORTS
ONE ROOM
FEATURES
_________________________________________________________________________________________
824-894 MHz / 1850-1990 MHz
Max Output Power
Supports Multiple
Users
W I R E L E S S
W I R E L E S S
The SIGNALBOOST™ DB Pro cellular amplifier significantly improves
voice and data performance of any cellular device on any network
(Cellular and PCS) inside of buildings experiencing weak signal, such as:
homes, fire stations, command posts, offices and other buildings. This
62 dB building signal booster combines high performance with ease
of installation. The DB Pro booster can be used with an external omnidirectional gain antenna with multiple mounting options that eliminates
researching cell tower locations and antenna orientation. The internal
S O H O
B U I L D I N G
SOHO Dual-Band Cellular Booster –
Perfect for Small Offices, Home Offices, RV’s and Buses
_____________________________________________
FEATURES
_______________________________________________________
•Works with Cellular and PCS frequencies
•Significantly improves voice and data signal quality
•Works with multiple cell phones and data cards simultaneously
•Receives and transmits better than your cell phone
•Designed for use with standard RG-6 (75 ohm) coax cable
•Works on all generations of CDMA, TDMA, GSM and high-speed data technologies
•Improves data communication rates needed for 3G technologies
•Extends cell phone battery life
•Automatic oscillation/overload protection
•FCC and IC type accepted
•Complete kits that includes the signal booster with all necessary antennas and coax
cable are available.
SPECIFICATIONS
______________________________________________
Say Goodbye to Dropped Calls
Wilson’s highest gain dual-band (800 &1900 MHz) wireless signal booster
for use in homes, offices and other buildings.
_______________________________________________________________
dome or panel antennas can be ceiling or wall mounted and offer the
ability to completely disguise the antenna on the inside of a building.
All components are interconnected using readily available RG-6 Coax,
which is often found pre-installed, simplifying cable runs.
SUPPORTS
WHOLE
HOUSE
Small Office / Home Office (SOHO)
Cellular Booster
™
Supports Multiple
Users
800/1900 MHz
Wilson Electronics
801245 800/1900 MHz
Wilson Electronics
801247
Say Goodbye to Dropped Calls
DT Dual-Band 800/1900 MHz
Desktop Signal Booster
800/1900 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
AG Pro 75™ Cellular Booster
SIGNALBOOST
™
For Small Office Area, Desk or Workspace Uses
Easy Set-up - Everything You Need is Included
801280
800/1900 MHz
Wilson Electronics
AG Pro 75™ Cellular Booster –
Perfect for Large Home and
Building Installations
____________________________________________________
_____________________________________________
____________________________________________________
Supports Multiple
Users
SUPPORTS
ONE ROOM
Supports Multiple
Users
FEATURES
FEATURES
D E S K T O P
SPECIFICATIONS
_______________________________________
Part Number
Frequency
System Gain
±5 dB
Isolation
> 90 dB
Dimensions
Home/Office Installation with
Multiple Antenna Mounting Options
120-240V AC, 50-60 Hz,
8W
Connectors
TNC Female / F-Female
Dimensions
6.2 x 4.2 x 1.5 (inch)
15.7 x 10.7 x 3.8 (cm)
Weight
Frequency
Passband Gain (nominal)
Area Needing
Increased
Signal
SignalBoost™ DT
Option C
Option B
Option A
20
Toll Free 1-866-294-6996
Inside Antenna
Optional Panel
Antenna Shown
(Sold Separately)
0.48 lbs (0.22 kg)
824-894 MHz / 1850-1990 MHz
70 dB at 800 MHz & 75 dB at 1900
MHz
1900 MHz
Power output for single cell
phone (uplink)
1200 mW
1100 mW
Power output for single
received channel (downlink)
26.0 dBm
25.2 dBm
Power Requirements
(using supplied adapter)
www.wilsonelectronics.com
50 ohms
800 MHz
Isolation
Parts Included
Bi-Directional Signal Booster
AC Power Supply
5.7 x 4.2 x 1.5 inch
14.0 x 10.8 x 3.9 cm
Power Output by Frequency
Noise Figure (typical)
Wireless operation - no physical connection to cell phone or cellular data card
0.64 lbs / 0.29 kg
_____________________________________________
Outside Antenna
Optional Wide Band
Antenna Shown
(Sold Separately)
AC Power
Supply
Cell phone, PDA, or
notebook
3.5 dB nominal
Wireless operation - no physical connection to cell phone or cellular data card
>90 dB
110-240 V AC, 50-60 Hz, 8 W
www.wilsonelectronics.com
21
Toll Free 1-866-294-6996
B O O S T E R
Power
Requirements
N female connectors
Antenna Impedance
3.5 dB nominal
Flatness
801280
INSTALLATION
C E L L U L A R
+9.5 dBm
_____________________________________________
Antenna Connectors
55 dB
Max RF (downlink)
SPECIFICATIONS
Model Number
824-894 MHz / 1850-1990 MHz
2.5 watts
Weight
____________________________________________________
801247
Max Output Power
Noise Figure
INSTALLATION
7 5 ™
D T
• Amplifies signals to and from cell tower
• Up to 10 times more power than your cell phone
• Wireless operation
• Works with Cellular and PCS frequencies
• Supports multiple phones/data cards
• 20’+ 30’ RG-6 cable for custom installation
• Plug-and-play kit
• Attractive, sleek design
• Automatic oscillation/overload protection
• FCC and IC type accepted
The AG Pro 75 is the highest gain signal
booster Wilson has released to date. The unit
delivers a maximum gain of 75dB at 1900 MHz
and 70dB at 800 MHz. The product includes
Wilson’s patented oscillation and cell site
overload protection, and proximity detection
technologies to prevent interference on the
cellular network. It works with all cellular
devices on all North American service provider
networks (except Nextel/iDEN).
P R O
S I G N A L B O O S T ™
________________________________________
• Adjustable gain control for optimal gain at
almost any location
• Bi-directional amplifier boosts signal to and
from cell site
• FCC type accepted, Industry Canada certificated
• Configurable with a variety of Wilson cellular
antennas to fit virtually any building installation
A G
A M P L I F I E R __________________________________________
NEW PRODUCT
PACKAGE CONTENTS
The AG Pro 75 is a dual-band, installerfriendly booster designed to provide a strong
cellular signal inside a building. The model is
Wilson Electronics’ first cellular signal booster
to feature an adjustable gain control that
allows the installer to optimize the unit’s gain
to match the requirements of the building
in which it is deployed. The adjustable gain
feature also simplifies installation by making
antenna placement less critical.
800/1900 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
DataPro™ Direct Connect
Cellular Booster
M2M solutions from Wilson Electronics
811225 Keeping Your M2M
Devices Connected
M2M Market
_____________________________________________
FEATURES
________________________________________
• Bi-directional amplifier boosts signal to and
from cell site
• Works on CDMA networks
• FCC type accepted, Industry Canada certificated
• Configurable to fit virtually any M2M situation
_____________________________________________
Model / Part Number
SMA Female
Dimensions
50 ohms
3.3 x 1.9 x .8 inch
(8.4 x 4.8 x 2.0 cm)
Frequency
824-894 MHz / 1850-1990 MHz
Gain
12dB Nominal
CDMA
800 MHz
31.5 dBm
Noise Figure (typical)
Isolation
ANTENNA
1900 MHz
32.7 dBm
3 dB nominal
>40 dB
Power Requirements
5V DC, 1A
BOOSTER
BACK OF VENDING MACHINE
WWW.WILSONM2M.COM
•
www.wilsonelectronics.com
PHONE: 866-839-9407
22
•
M2M@WILSONELECTRONICS.COM
Toll Free 1-866-294-6996
www.wilsonelectronics.com
23
Toll Free 1-866-294-6996
B O O S T E R
CELLULAR
MODEM
C E L L U L A R
Power output (uplink)
BACK OF VENDING MACHINE
C O N N E C T
Impedance (input/output)
BOOSTER
_____________________________________________
811225
Connectors
CELLULAR
MODEM
INSTALLATION
D I R E C T
SPECIFICATIONS
ANTENNA
A significant percentage of M2M devices will
continue for the foreseeable future to rely on
wireless networks that now exist. In locations
where cellular signals are weak due to distance
from the cell site, terrain features, or building
materials like concrete and steel, DataPro
Direct Connect provides a strong reliable
signal, ensuring successful data transfer.
D A T A P R O ™
• Assures a strong, reliable signal can be
acquired and maintained - even in weak
signal areas
• Reduces data error rates from weak signal,
resulting in quicker transfers
NEW PRODUCT
A Wilson cell booster provides two primary
benefits for M2M connected devices:
The machine-to-machine (M2M) or
connected device universe is sometimes
called the Internet of Things because devices
communicate with each other over wired
or wireless connections and share data
without direct human intervention. Juniper
Research has forecast the number of wireless
M2M devices will grow to 412 million by
2014. Growth will be led by utility metering,
mobile connected buildings, telematics, and
automated retail and banking connections,
according to Juniper.
811101 / 811201 / 811701 / 811901 / 814021
Say Goodbye to Dropped Calls
Direct-Connection Boosters
Building Antenna Options
Pages 28-35
FEATURES
_______________________________________________________
Directional Yagi Antenna
Magnet-Mount Antenna
Trucker Antenna
Marine Antenna
Optional Accessories
Page 38,40
• Improves voice and data signal quality
• Improves data communication rates needed for 3G technologies
• Power control logic ensures maximum output power is within cellular network standards
• Automatic gain control
Coax Cable Extension
Lightning Suppressor
2-Way Splitter
Combiner/Diplexer
Taps
ANTENNA
• Advanced electronics receive and transmit better than a cell phone or cellular
data card
811101 / 811201 / 811701 / 811901 / 814021
800 • 800 iDEN • 800/1900 • 900/1800 • 900/2100 MHz
Wilson Electronics
BOOSTER
• Connects directly to cell phone with a Wilson antenna adapter
• Mobile, marine and building use
• Greatly reduces disconnects, drop-outs, and noise
• Transmits signal energy to the outside antenna
• 3 watt power signal booster
CELLULAR
MODEM
• FCC and IC type accepted
BACK OF VENDING MACHINE
SPECIFICATIONS
Frequency (MHz)
811101
811201
811701
811901
824-894
824-894
1850-1990
890-960
1710-1880
890-960
1885-2200
(with 1900 MHz bypass)
Gain
Max Output Power
814021
10 dB / 14 dB
3000 mW
2250 mW
3000 mW
Max RF (downlink)
3000 mW
Pages 40-41
Mini Magnet-Mount Antenna
Magnet-Mount Antenna
Trucker Style Antenna
NMO Antenna
Coax Cable Extension
Hardwire Power Supply Kit
Carrying Case
Outside Antenna
Magnet Mount Shown
+15 dBm
3.5 dB nominal
3.5 dB nominal
Noise Figure
Flatness
± 2 dB / ±2 dB
Isolation
> 90 dB
> 90 dB
Power Requirements
±1.5 dB / ±1.5 dB
Cellular
Device
12 V, 0.5-1.5 A max
13.8 V, 3.5 A max
Connectors
FME-Male 50 ohms
Dimensions
5.5 x 4.3 x 1.4 (inch) / 14.0 x 10.8 x 3.5 (cm)
Weight
www.wilsonelectronics.com
3000 to 5000 mW
Optional Accessories
Pages 30-35
Power
Adapter
Direct
Connection
Signal
Booster
1.32 lbs / 0.6 kg
24
Toll Free 1-866-294-6996
www.wilsonelectronics.com
25
Toll Free 1-866-294-6996
A M P L I F I E R S
D I R E C T - C O N N E C T I O N
Part Number
Mobile Antenna Options
D I R E C T - C O N N E C T I O N
A M P L I F I E R S ______________________________________________________________________________________________
MULTIPLE SOLUTIONS
PLUG AND PLAY KIT COMPONENTS
KIT PART
NUMBER
801201
KIT PART
NUMBER
=
=
+
301103
811210
=
801201
301127
301113
811214
=
+
+
301103
301143
Wilson Electronics affordable SIGNALBOOST™ amplifier is
the perfect choice for the user looking to improve cellular
signals for a single cell phone or data card on the road
or indoors. The Ultra-Slim Antenna attaches to any phone
or data card – no equipment-specific adapter is required.
801230
801232
=
+
301125
YOUR
CHOICE
OF ANTENNA
801240
301146
SIGNALBOOST™ MINI-MOBILE
____________________________________
With up to six times more power than a typical cell phone, the
Mini-Mobile is available in two configurations.
301149
• The 801230 features the Mini-Mobile Signal Booster and
Wilson’s Ultra-Slim interior antenna. Users can choose their
own exterior antenna.
+
801230
• The 801232 is a complete, plug-and-play kit with a MagnetMount exterior antenna and Wilson’s Ultra-Slim interior
antenna.
301149
SIGNALBOOST™ MOBILEPRO™
+
____________________________________
Unique to the industry, the SIGNALBOOST™ MobilePro™ is an affordable, compact and portable signal booster system designed
to improve cell phone and data card performance for people
on the go. The slim booster unit incorporates a built-in interior
antenna and packs up to three times the power of a typical cell
phone. For added versatility, it can be powered through a computer USB port, a vehicle power adapter or a standard AC wall
outlet. Four plug-and-play kits are available.
801240
801241
=
+
301125
• The 811210 is the basic SIGNALBOOST™ kit and is designed for users who prefer to select their own outside
antenna.
• Compact Mini Magnet-mount antenna is included with
the 811211. It attaches quickly and easily to a vehicle
roof or to the optional window-mount bracket for building use.
+
811210
=
+
YOUR
CHOICE
OF ANTENNA
____________________________________
301143
811210
801230
• For plug-and-play convenience, the 801212 includes
the Low Profile interior antenna along with Wilson’s
best-selling 12-inch Magnet-Mount exterior antenna,
an ideal combination for passenger cars, vans and
light trucks.
SIGNALBOOST™
+
+
Wilson Electronics has taken its most popular signal
booster, the Dual-Band Mobile Wireless, and combined it
with several other top-selling components to create two
rugged, high-performance kits.
• The 801201 features Wilson’s Low Profile interior vehicle
antenna and is designed for users who want to choose
their own outside antenna.
+
YOUR
CHOICE
OF ANTENNA
=
____________________________________
301127
811210
811211
MOBILE WIRELESS
+
YOUR
CHOICE
OF ANTENNA
801201
801212
PLUG AND PLAY KIT COMPONENTS
801242
=
• The 801241 includes everything needed for improved cellular
performance on the road and indoors. The package includes
the booster itself, along with Wilson’s popular 12-inch magnetmount antenna, a suction-cup window bracket, all power
options, and a convenient carrying case.
801240
+
301126
• For users desiring a lower profile antenna, the 801242 replaces
the 12-inch magnet-mount antenna with our four-inch mini
magnet-mount antenna.
801240
• For a hands-free mobile application, the 811214
features the Cradle Plus. Acting as a signal coupler,
the Cradle Plus transfers the signal between the phone
and the signal booster and is compatible with any
hands-free device. For added versatility, the 811214
also includes the Ultra-Slim Antenna to facilitate the
standard SIGNALBOOST™ installation.
NOTE: 811710 & 811910 can also be put into kits upon request.
www.wilsonelectronics.com
26
Toll Free 1-866-294-6996
www.wilsonelectronics.com
27
Toll Free 1-866-294-6996
301101 / 301701 / 301119 / 301130 / 301133
Say Goodbye to Dropped Calls
High-Gain Antennas
Rugged, High-Gain Antennas
Deliver Powerful Performance
_______________________________________
Professional drivers demand top performance
from their equipment. Wilson provides just
that with its line of trucker antennas. Available
in four models for alternative installations.
These antennas offer the highest allowable
gain, dual-band versatility (800/1900 MHz),
and omni-directional design. Engineered
specifically for trucks and RVs, these popular
antennas can also be used for fixed
installation on buildings.
FEATURES
_______________________________________
• Mobile, marine and building use
• No ground plane required
Built-in ground plane allows for use on any surface metal, fiberglass, wood, etc.
• 19-inch fiberglass mast raises antenna above
obstructions (301101)
• Mounting options available for any application
301101 / 301701 / 301119 / 301130 / 301133 800/1900 • 900/1800 MHz
Wilson Electronics
5/8-inch x 7-inch threaded mounting rod spans the distance between roof and headliner
SEE PICTURE ON PAGE 28
Part Number
Frequency
Range
www.wilsonelectronics.com
301101
301701
SEE PICTURE ON PAGE 28
SEE PICTURE ON PAGE 28
SEE PICTURE ON PAGE 28
301119
301133
301130
800/1900 MHz 900/1800 MHz
806-894 MHz / 1850-1990 MHz
Antenna Gain
5.12 dBi 806-894 MHz / 6.12 dBi 1850-1990 MHz
Signal Pattern
Omni
Vertical
Ground Plane
Built-In Ground Plane
Connector
Material
Coax Cable
Weatherproof and waterproof
Built-in spring reduces impact damage
28
50 ohms
Polarization
301130 Marine Antenna
301133 RV / Trucker Spring-Mount Antenna
Impedance
301119 RV / Trucker Roof-Mount Antenna
19-inch fiberglass mast raises antenna above trailers
301101 / 301701 Trucker Mirror-Mount Antenna
______________________________________________________________________________________________
Toll Free 1-866-294-6996
Height
Mount
FME Female
Whip - Stainless Steel / Extension
- Fiberglass
Whip - Stainless Steel
Whip - Stainless Steel / Casing
- Fiberglass
RG58 - 10.5 feet / 3.2 meters
RG58 - 13.5 feet / 4.115 meters
RG58 - 7 inches
32.0625 inches / 81.45 cm
Standard CB 3/8-inch x 24 Thread
(24 inches including threaded mount)
18 inches
21.5 inches including spring mount
/ 54.61 cm
5/8-inch x 7-inch Threaded
Mounting Rod
3-Way Mount with Spade Stud
Part# 901104
21 inches / 53.3 cm
(including coupler)
Standard 1-inch x 14 thread
A N T E N N A S
T R U C K E R
SPECIFICATIONS
T R U C K E R
A N T E N N A S Signal Patterns
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
www.wilsonelectronics.com
29
Toll Free 1-866-294-6996
800/900 MHz • 800/900/1800/1900 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
Magnet-Mount Antennas
Part Number
301125
301128
806-894 / 896-940 / 1850-1990
Impedance
301703
304202
900/1800
800/900/1900
50 ohms
301113
301126
301131
WHITE
301132
WHITE
806-894 / 900 / 1800 / 1850-1990
NMO Trucker
Antennas
Glass-Mount & Mini Glass-Mount Antennas
301102
301114
304201
806-894 MHz
1850-1990 MHz
806-894 MHz
1850-1990 MHz
806-866 MHz / 896-939 MHz
1850-1990 MHz
50 ohms
2.12 dBi 806-894 / 1.5 900 MHz
3.12 dBi 1850-1990 / 3.12 1800 MHz
Signal Pattern
Omni
Omni
Omni
Vertical
Vertical
Vertical
Metal ground plane required
Metal ground plane required
Connector
FME Female
SMA Male
TNC Male
Material
Coax Cable
FME Female
FME Female
FME
SMA Male FME Male
Female
Built-In Ground Plane
RG174 - 10 feet / 3.05 meters
Height
12.25 inches / 31.12 centimeters
4.175 inches / 10.60 centimeters
Mount
Rare earth magnet
Rare earth magnet
Toll Free 1-866-294-6996
806-894 MHz / 1850-1990 MHz
301105
800 MHz900 MHz
4.9 dBi 806-894 MHz /
5.9 dBi 1850-1990 MHz
Metal ground plane required
FME Female
Whip - Stainless Steel
RG174 - 10 feet / 3.05 meters
30
1.4 dBi 806-894 MHz
2.4 dBi 1850-1990 MHz
N Male
Whip - Stainless Steel
www.wilsonelectronics.com
3.5 dBi 806-894 MHz
4.8 dBi 1850-1990 MHz
304203
50 ohms
3.5 dBi 806-939 MHz 896-939
MHz
4.5 dBi 1850-1990 MHz
5.12 dBi 806-894 / 6.12 dBi 1850-1990
Ground Plane
301104
50 ohms
Antenna Gain
(MHz)
Polarization
301112
NMO Antennas
Whip - Plastic Coated Steel
Wire
Whip - Stainless Steel
RG58 - 14 feet
4.27 meters
15 (inch)
38.10 (cm)
5.375 (inch)
13.65 (cm)
15 (inch)
38.10 (cm)
Glass mounting with
3M™ adhesive
www.wilsonelectronics.com
Whip - Stainless Steel
sold separately
sold separately
13.25 inches / 33.7 cm
13.88 inches / 35.3 cm
NMO Mount Types
(see NMO mount options on page 37)
31
Toll Free 1-866-294-6996
A N T E N N A S
Frequency
Range (MHz)
301103
Mini Magnet-Mount Antennas
NMO
• Mobile and indoor use
301102 • 301114 • 304201
Glass-Mount & Mini Glass-Mount Antennas
Permanent installation
• Perfect for cars, vans and light trucks
301113 • 301126 • 301131 • 301132
Mini Magnet-Mount Antenna
Removable - transfers from one vehicle to another
301103 • 301125 • 301128 • 301703 • 304202
Magnet-Mount Antenna
Removable - transfers from one vehicle to another
E X T E R N A L
___________________________________
E X T E R N A L
V E H I C U L A R
FEATURES
V E H I C U L A R
G E N E R A L
Designed specifically for use with our
mobile amplifiers, Wilson Electronics wide
range of vehicle antennas offers top
performance and multiple mounting
options. Our best-selling magnet-mount
antennas install in seconds and are
transferable between vehicles. For a more
permanent installation, users can choose
from glass- or NMO-mount options.
G E N E R A L
A N T E N N A S
___________________________________
301104 • 304203 • 301105 NMO Antennas
Stay Connected on the Road
With Wilson Electronics
Mobile Antennas
301112 NMO Trucker Antenna
Same styling as our popular trucker antenna for NMO mounting
General Vehicular External Antennas
301106 / 301127 / 301143 / 301149 / 301208 / 301209
Say Goodbye to Dropped Calls
800/900/1800/1900/2100 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
Cradle Plus Antennas
Low Profile & Ultra-Slim Antennas
FEATURES
301146 / 301148
800/1900 MHz • 900/1800 MHz
900/2100 MHz
Wilson Electronics
Signal Patterns
Omni-directional when
mounted vertically
________________________________________
Hands-Free Safety and Convenience
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
•Low profile for discreet installation
____________________________________________
Wilson Electronics innovative Cradle Plus features
a built-in inside antenna that works with Wilson
SIGNALBOOST™ amplifiers. When placed in the Cradle
Plus, a cell phone benefits from the maximum possible
signal improvement from the booster system, due to the
proximity of the built-in antenna.
•Includes mounting options
301106
301208
301209
301127
FEATURES
____________________________________________
Signal Patterns
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
•Compatible with all cell phones and data cards
301143
301149
•Increases driver safety
•Supports any hands-free device, including ear-buds
and Bluetooth® products
•Installs in minutes
ew
N
SPECIFICATIONS
____________________________________________
Part Number
Frequency
301106
301127
806-894 MHz / 1850-1990 MHz
Impedance
Antenna Gain
A N D
P R O F I L E
301209
806-939 MHz
1850-1990 MHz
806-939 MHz
1850-1990 MHz
1 dBi (800 MHz)
15dB f/b
2 dBi (1900 MHz)
7dB f/b
1 dBi (800 MHz)
15dB f/b
2 dBi (1900 MHz)
7dB f/b
120º H Plane
120º H Plane
FME Female
TNC Male
RG174 - 7.5 feet
2.29 meters
RG174 - 5 feet
1.524 meters
RG174 - 5 feet
1.524 meters
3.25 in. / 8.26 cm.
5.13 in. / 13 cm.
5.13 in. / 13 cm.
1.56 in. / 4 cm.
1.56 in. / 4 cm.
806-960 MHz / 1700-2300 MHz
2.2 dBi 806-894 MHz
3.2 dBi 1850-1990 MHz
3 dBi (800 MHz)
2 dBi (1900 MHz)
Vertical
RG58 - 14 feet /
4.27 meters
FME Female
RG174 - 14
feet / 4.27
meters
5 in. / 12.7 cm.
Width
SMA Male
1.5 inches / 3.8 cm
Connector
301146
301148
806-960 MHz / 1700-2100 MHz
50 ohms
FME Female
SMA Male
Coax Cable
RG 174 - 7.5 feet
Length
4.125 in / 10.5 cm
Width
2.875-4.5 in / 7.3-11.4 cm
Minimum 6 inches away from metal
L O W
Building Mount
Frequency Range
Impedance
Omni when mounted vertically
FME Female
Part Number
A N T E N N A S
Length
301208
P L U S
Coax Cable
Connector
301149
50 ohms
Signal Pattern
Polarization
301143
C R A D L E
U L T R A - S L I M
•Multiple mounting options: console, dashboard or
windshield
&
Im
pr
A N T E N N A S ov
ed
•Adjustable to fit any size cell phone or MiFi ® card
www.wilsonelectronics.com
32
Toll Free 1-866-294-6996
www.wilsonelectronics.com
33
Toll Free 1-866-294-6996
301111 / 301129 / 301142 / 301124 / 304411 / 304475
Say Goodbye to Dropped Calls
Yagi Antennas
800/1900 • 800/900 MHz
800/2100 MHz
Wilson Electronics
Say Goodbye to Dropped Calls
Building Antennas
Durable, high-gain, directional antennas
Signal Patterns
FEATURES
301111 Yagi 800 MHz
Our highest gain antenna for
the 800 MHz band
Omni-directional when
mounted vertically
________________________________________
H - Plane @ 850 MHz
H - Plane @ 1920 MHz
• Built-in ground plane
• Mounting hardware included
• For fixed installations
301129 Yagi 800 MHz
301142 Yagi 900 MHz
301121
301151
Lower profile, lighter
alternatives for 800 and 900 MHz
301134 (includes suction cups)
301135
301155 (75 ohm)
301157 (weatherproof)
301123
301141
301201
301202
301124 Yagi 1900 MHz
Our highest gain antenna for
the 1900 MHz band
304475 75 ohm
304411 50 ohm
Wide Band
Directional Antenna
Interior Antennas
SPECIFICATIONS
______________________________________________________________________________________________
Part Number
Number of Elements
301111
301129
301142
8
301124
5
304411
304475
9
9
1850-1990 MHz
700-2700 MHz
Frequency
806-900 MHz
Impedance
50 ohms
50 ohms
50 ohms
13 dBi
10 dBi
14 dBi
8.0-10.5 dBi
50 watts
10 watts
25 watts
100 watts
Antenna Gain
Max Power
800-900 MHz
880-965 MHz
50 ohms
75 ohms
Aluminum
Weight
2.9 ounces / 0.081 kg (with mount)
Y A G I
Mount
Wind Surface Area
Brackets
www.wilsonelectronics.com
16.8 inches /
43 centimeters
(with mount)
11.42 inches /
29 centimeters
3.0 ounces / 0.086 kg
(with mount)
3.31 lbs
1.5 Kg
<120 cm2
<465 cm2
Max OD 2 inches
34
Frequency
Impedance
301151
301123
Toll Free 1-866-294-6996
301134
(includes
suction cups)
301157
301155
(weather proof)
(75 ohm)
301141
301201
301202
800-910 MHz
1800-1990 MHz
50 ohms
75 ohms
800-910 MHz
50 ohms
800-960 MHz
1710-2500 MHz
50 ohms
75 ohms
806-894 MHz
1850-1990 MHz
75 ohms
806-894 MHz
1850-1990 MHz
75 ohms
50 ohms
Polarization
Vertical
Horizontal and
Vertical
Vertical
Vertical
Vertical
Antenna
Gain
2.5 dBi
5.2 dBi
7 dBi / 10 dBi
5 dBi / 7 dBi
5.12 dBi / 6.12 dBi
15 watts
25 watts
Beamwidth
Hor. Plane
Beamwidth
Ver. Plane
Mounts on pipe with 0.5 inch to 1.5 inch diameter
<100 cm2
301121
VSWR
Connector
Dimensions
Ground
Plane
Front to
Back Ratio
50 watts
360°
360°
70°
100°
360°
120°
120°
50°/45°
100°
60°
1.5:1
1.5:1
1.5:1
2.0:1 (800)
1.8:1 (1900)
1.8:1
N-Female
F-Female
Diameter 8 inches /
20.32 cm
N-Female
Diameter 7.72
inches / 19.6 cm
N-Female
F-Female
8.27 x 7.09 x 1.73 inches
21 x 18 x 4.39 cm
Built-In Ground Plane
20/15 dB
typical
N/A
www.wilsonelectronics.com
35
F-Female
F-Female
FME-Female
7.75 x 4.38 x 2.63 inches
19.7 x 11.1 x 6.7 cm
18 inches
None Required
Built-In Ground Plane
11/14 dB
typical
N/A
Toll Free 1-866-294-6996
A N T E N N A S
A N T E N N A S Material
14.4 inches /
37 centimeters (with mount)
Part Number
B U I L D I N G
N Female
32.5 inches /
82.6 centimeters
______________________________________________________________________________________________
Max Power
Vertical
Connector
Length
SPECIFICATIONS
301135
Directional
Polarization
Exterior Antennas
301121 / 301151 / 301123 / 301134 / 301135 / 301155 / 301157 / 301141 / 301201 / 301202 800 • 800/900 • 900 MHz
1900 MHz
Wilson Electronics
Wilson Electronics
Say Goodbye to Dropped Calls
Antenna Adapter Type Descriptions
Adapters used with Antennas or Direct Connect Boosters Only
Back Plug
Plugs into the adapter port on the upper back portion of the
phone. A rubber or plastic plug may need to be removed.
Press firmly to ensure a good connection - do not twist.
Using too much force could damage the phone.
T Y P E
A D A P T E R
A N T E N N A
Back Plate
Place included VELCRO® on back top of phone as shown.
Attach adapter to VELCRO®.
Note: Also works with cellular data cards.
TECH SUPPORT
1) Visit www.wilsonelectronics.com
2) E-mail tech@wilsonelectronics.com
3) Call Toll-Free 866-294-1660
901133 Omni Antenna Building Mounting
Bracket
Allows for easy mounting of the Omnidirectional Antenna (301201, 301202) on the
outside of a building.
Includes hardware for mounting on a pole,
fascia, roof, wall, etc.
901102 3/4-inch NMO Mount
Requires NMO Antenna (sold separately)
Requires 3/4-inch hole in sheet metal
surface for connection
14 feet RG-58U Cable
FME-Female Connector
901125 In-Ceiling Dual-band Dome Antenna
Bracket
Compatible with the Wilson Dual-Band Dome
Antenna (301121 & 301123)
Allows for mounting the dome antenna in the
attic.
901103 3/8-inch NMO Mount
Requires NMO Antenna (sold separately)
Requires 3/8-inch hole in sheet metal
surface for connection
14 feet RG-58U Cable
FME-Female Connector
901123 In-Wall Panel Antenna Mount
Compatible with the Wilson Panel Antenna
(301135, 301155).
Bracket can be inserted into an interior wall.
Features a paintable cover.
901119 Marine Antenna Mount
For use with the Marine Antenna to mount
on various surfaces
Features standard 1 inch x 14 threaded
mount
301147 Panel Antenna Upgrade Kit for the
Desktop Amplifier (805047)
Includes Panel Antenna, 20’ white RG6 coax
cable, N-male to F-female & F-female to
TNC-male connectors.
901104 3-Way Mount with Spade Stud
Compatible with Wilson Electronics Cellular
Trucker Antennas (301101) and (301133)
3/8-24 thread
5 millimeter chrome-plated aluminum
Hardware included
901130 Cup Holder Car Mount for use with
Wilson MobilePro, Cradles & Cradle
Boosters
901106 Horizontal Mount with Spade Stud
Compatible with Wilson Electronics Trucker
Antennas (301101) and (301133)
3/8-24 thread
5 millimeter chrome-plated aluminum
Hardware included
901137 Low Profile Adjustable Suction Cup
Car or Table Mount for use with Wilson
MobilePro, Cradles & Cradle Boosters
901128 Window-Mount Antenna Bracket
For use with Magnet-Mount and Mini
Magnet-Mount Antennas
Suction cups attach to inside surface of
window; antenna mounts on horizontal
platform
901132 Adjustable Suction Cup Car or Table
Mount for use with Wilson MobilePro,
Cradles & Cradle Boosters
859931 Ground Plane
For use with Magnet-Mount and Mini
Magnet-Mount Antennas
White metal, 3.5 inches in diameter
901117 Antenna Pole Mounting Assembly
Includes
U-Bracket assembly
Wall mount bracket
10” Length x 1.5” Diameter Aluminum Tube
For more details and the latest information regarding adapters visit www.wilsonelectronics.com
www.wilsonelectronics.com
36
Toll Free 1-866-294-6996
www.wilsonelectronics.com
37
Toll Free 1-866-294-6996
P A R T S
Side Plug
Plugs into the adapter port on the upper-side of the phone.
A rubber plug may need to be removed. Press firmly to
ensure a good connection - do not twist. Using too much
force could damage the phone.
901101 NMO TRUNK MOUNT
Requires NMO Antenna (sold separately)
14 feet RG-58U Cable
FME-Female Connector
Attaches on the lip of a trunk lid or similar
surface
R E P L A C E M E N T
Cellular Data Cards
Adapter plugs into the adapter port on the end of the
cellular data card or plugs in as an antenna replacement.
Check the model for a specific adapter type.
Mounts & Replacement Parts
&
Bottom Plug
Plugs into the bottom of the cell phone. Push until there
is a click. Press button(s) in middle or on sides to release
connector from the phone.
Say Goodbye to Dropped Calls
M O U N T S
D E S C R I P T I O N S
Top Plug
Plugs into the adapter port on the top of the phone. A
rubber plug may need to be removed. Press firmly to ensure
a good connection - do not twist. Using too much force
could damage the phone.
Wilson Electronics
C O M B I N E R / D I P L E X E R
Wilson Electronics
Say Goodbye to Dropped Calls
Say Goodbye to Dropped Calls
CONNECTORS
TAPS
859906
859907
859976
-6 dB Tap
700-2300 MHz
50 Ohm
-10 dB Tap
700-2300 MHz
50 Ohm
-10 dB Tap
700-2300 MHz
75 Ohm
N Female
N Female
F Female
When to use taps
For use in signal
distribution systems to split
the amplified signal for
multiple inside antennas
with minimum signal loss or
for controlling the amount
of signal to small and large
areas. Features low-loss
signal throughput with one
-6 dB or -10 dB tap.
SPLITTERS
FME
Female
Mini UHF
Female
FME
Female
971103
N Female
-3 dB Splitter
700-2300 MHz
75 Ohm
F Female
859957
-3 dB 2 Way Splitter
700-2700 MHz
50 Ohm
N Female
FME
Male
FME Male
859980
50 Ohm
859981
-6 dB 4 Way Splitter
700-2700 MHz
50 Ohm
N Female
-70 dB
-6 dB
TAP
-10 dB
TAP
For use in signal
distribution systems to split
the amplified signal with
minimum signal loss. Equal
amounts of signal sent
to multiple antennas for
similarly sized areas.
-3 dB
-72 dB
-10 dB
-6 dB
971105
N Female
TNC
Male
FME
Male
971106
FME
Male
N Female
Used to connect (2) Wilson 400 coax
with N Male adapters together
SMA
Male
971110
FME Female
FME Female
971121
971119
971117
Mini UHF
Female
N Female
-72 dB
-3 dB
SPLITTER
971107
FME
Male
971127
F Female
N Male
F Female
971128
F Female
Used to connect (2) RG-6 coax
with F Male connectors together
971129
F Female
971130
TNC
Male
SMA
Male
N Male
SMA
Female
971132
FME
Female
971136
CRIMP CONNECTORS
N Male Crimp
Wilson 400 or RG 8u Cable
FME Male Crimp
for RG 58 Cable
Mini UHF Female
Crimp for RG 174 Cable
971109
971115
971118
TNC Male Crimp
for RG 58 Cable
FME Female Crimp
for RG 58 Cable
FME Female Crimp
for RG 174 Cable
971111
971114
971120
Mini UHF Male Crimp
for RG 58 Cable
N Male Crimp
for RG 58 Cable
Male SMA Crimp
for RG 58 Cable
971112
971116
971131
-75 dB
-75 dB
LIGHTNING PROTECTION
•
Lightning Surge
Protector
• N-Female Connectors
• Attenuation less than 0.2 dB
• Frequency range up to 3 GHz
• Replaceable gas discharge element (859920)
Dual-Band
Combiner/Diplexer
www.wilsonelectronics.com
• Each output port loses .5 dB
• 800-900 MHz & 1850-1990 MHz bands (Cellular, iDEN & PCS)
• N-Female Connectors
•C
an connect two outside antennas to one amplifier or two
amplifiers to one inside antenna
38
Toll Free 1-866-294-6996
SMA Male Crimp
for RG 174 Cable
971139
www.wilsonelectronics.com
39
Toll Free 1-866-294-6996
C O N N E C T O R S
COMBINER DIPLEXER
859922
TNC
Male
-3 dB
-81.5 dB
-76 dB
859902
FME Female
N Female
-.5 dB
-71.5 dB
971113
FME
Male
Mini UHF
Male
When to use splitters
-4.8 dB 3 Way
Splitter
700-2700 MHz
-1.5 dB
N Male
FME
Male
C R I M P
S P L I T T E R S
•
L I G H T N I N G
P R O T E C T I O N
•
859959
TNC
Female
971104
971108
T A P S
C O N N E C T O R S Wilson Electronics
Wilson Electronics
Say Goodbye to Dropped Calls
Coaxial Cables
C O A X I A L
C A B L E S
Wilson Electronics
Power Supplies
RG58 Low-Loss
Coaxial Cable
FME-Male /
FME-Female
Wilson 400 Ultra
Low-Loss Coaxial
Cable N-Male /
N-Male - BLACK
Wilson 400 Ultra
Low-Loss Coaxial
Cable N-Male /
N-Male - WHITE
951101
951102
951103
951125
952302
952310
952320
952330
952350
952375
952300
952402
952410
952420
952430
952450
952475
952400
5-feet
10-feet
15-feet
20-feet
2-feet
10-feet
20-feet
30-feet
50-feet
75-feet
100-feet
RG58 Low-Loss
Coaxial Cable
N-Male /
FME-Female
RG-174 Coaxial
Cable
FME-Female /
FME-Female
951110
951120
951104
951116
2-feet
10-feet
20-feet
2-feet
10-feet
20-feet
30-feet
50-feet
75-feet
100-feet
951116
BUILDING POWER SUPPLIES
859903
AC/DC 12 V Power Supply
Converts 120/240 V AC to 12 V DC
859940
Home/Office Accessory Kit
AC/DC 12 V Power Supply
Converts 120/240 V AC to 12 V DC
Window Mount Antenna Bracket
859912
AC/DC 6 V Power Supply
Converts 120/240 V AC to 6 V DC
Flat Coax - White
951129
8¾-inches
(75 ohm)
6-feet
RG-174 Coaxial
Cable
FME-Female /
FME-Female
Attenuators
859935
859936
859926
859927
6-feet
3dB
6dB
10dB
20dB
859953
AC/DC 5V USB Power Supply
(USB cable not included)
859977
3’ USB cable for Power Supply
Need help finding a
power supply?
For the most up to date
information on all our
products call our tech support
department toll free
1-866-294-1660
VEHICLE POWER SUPPLIES
859913
DC/DC 6 V Power Supply
Converts 12 V DC to 6 V DC
859904
DC 12 V
Power Supply
859905
DC 12 V Hardwire Kit
Power Supply
859923
DC/DC 6 V Hardwire Kit
Power Supply
Converts 12 V DC to 6 V DC
859939
DC 12 V Hardwire Kit
Power Supply
(iDEN High-Power Amplifier)
859945
DC/DC 6 V
Power Supply
For Mini Mobile amplifier
859961
6V CLA Power Supply
Mini USB jack for iBooster
859963
CLA Power Supply with 3’ USB
Cable for C-Booster and U-Booster
Cradle Amplifier
S U P P L I E S
2-feet
20-feet
30-feet
50-feet
Wilson 400 Ultra
available in
500-feet and
1000-feet
P O W E R
RG-6 Low-Loss
White Coaxial Cable
F-Male / F-Male
950602
950620
950630
950650
Say Goodbye to Dropped Calls
LOSS PER 10’
Portable Signal Booster Vented
Soft Carrying Case
Designed to help protect your signal booster
Sturdy, shock-absorbing material
Keeps components together and organized
Quick and easy access
P O R T A B L E
C A S E Mobile to Mobile
ACTUAL SIZE
800
MHz
1900
MHz
13/32”
Wilson
400
.45 dB
.7 dB
3/8”
RG-6
.83 dB
1.35 dB
3/16”
RG-58
Cable
1.0 dB
2.66 dB
3/32”
RG-174
Cable
3.58 dB
6.66 dB
Mobile to Home/Office
Bag only - all components sold separately
Part Number
859924
Dimensions
10.5 x 9.5 x 2.5 (inch)
26.67 x 24.13 x 6.35 (cm)
www.wilsonelectronics.com
40
Toll Free 1-866-294-6996
www.wilsonelectronics.com
41
Toll Free 1-866-294-6996
twitter.com/wilsoncellular
facebook.com/wilsoncellular
www.wilsonelectronics.com
Wilson Electronics®
3301 E. Deseret Drive
St. George, Utah 84790
General: 1-866-294-6996
+1-435-673-5021 (Outside of U.S.)
Fax: 435-656-2432
info@wilsonelectronics.com
Technical Support: 1-866-294-1660
tech@wilsonelectronics.com
Sales Department: 1-800-204-4104
sales@wilsonelectronics.com
International Sales (excluding Canada):
export@wilsonelectronics.com
UPDATE
03-02-11 • PART 772211