Technical
Information
Manual
Revision n.1
29 January 2010
MOD. NV8020
NPO:
00109/09:CNMVM.MUTx/01
7U CRATE
6 SLOT VME64
5 SLOT NIM
CAEN Technologies will repair or replace any product within the guarantee period if the
Guarantor declares that the product is defective due to workmanship or materials and has not
been caused by mishandling, negligence on behalf of the User, accident or any abnormal
conditions or operations.
CAEN Technologies declines all responsibility for
damages or injuries caused by an improper use of the
Modules due to negligence on behalf of the User. It is
strongly recommended to read thoroughly the CAEN
User's Manual before any kind of operation.
CAEN Technologies reserves the right to change partially or entirely the contents of this
Manual at any time and without giving any notice.
Disposal of the Product
The product must never be dumped in the Municipal Waste. Please check your local
regulations for disposal of electronics products.
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
TABLE OF CONTENTS
1.
GENERAL DESCRIPTION.........................................................................................................................4
1.1
2.
3.
TECHNICAL SPECIFICATIONS..............................................................................................................5
2.1
TECHNICAL SPECIFICATION TABLE ...........................................................................................................5
2.2
MAINS VOLTAGE AND CONNECTION ........................................................................................................5
VME SECTION.............................................................................................................................................8
3.1
BACKPLANE MECHANICAL DESIGN ..........................................................................................................8
3.1.1
Climatic Parameters........................................................................................................................8
3.1.2
Mechanical Parameters...................................................................................................................8
3.1.3
Electrical parameters ......................................................................................................................8
3.2
4.
OVERVIEW ...............................................................................................................................................4
POWER SUPPLY SPECIFICATIONS ..............................................................................................................9
NIM SECTION............................................................................................................................................11
4.1
THE MOD. N8315 LINEAR POWER SUPPLY .............................................................................................11
4.1.1
Power supply installation ..............................................................................................................11
LIST OF FIGURES
FIG. 1.1: THE MOD. NV8020 CRATE ....................................................................................................................4
FIG. 2.1: MOD. NV8020 TECHNICAL DRAWING (FRONT, NIM POWER SUPPLY NOT PRESENT)..............................6
FIG. 2.2: MOD. NV8020 TECHNICAL DRAWING (BACK).......................................................................................6
FIG. 2.3: MOD. NV8020 TECHNICAL DRAWING (SIDE).........................................................................................7
FIG. 2.4: MOD. NV8020 FRONT PANEL WITH ON/OFF SWITCH AND VME +5V / ±12V LEDS .............................7
FIG. 3.1: VME CPCI POWER SUPPLY ...................................................................................................................9
FIG. 4.1: MOD. N8315 LINEAR POWER SUPPLY ..................................................................................................11
FIG. 4.2: MOD. N8315 POWER SWITCH AND STATUS LED ...................................................................................11
FIG. 4.3: MOD. N8315 BACKPLANE NIM CONNECTORS .....................................................................................12
LIST OF TABLES
TABLE 2.1: MOD. NV8020 TECHNICAL FEATURES ..............................................................................................5
TABLE 2.2: HIRSCHMANN CONNECTOR CABLING..................................................................................................5
TABLE 3.1: VME POWER SUPPLY TECHNICAL SPECIFICATIONS ...........................................................................9
TABLE 4.1: MOD. N8315 LINEAR POWER SUPPLY TECHNICAL SPECIFICATIONS ................................................12
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
3
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
1. General description
1.1
Overview
The CAEN Mod. NV8020 is a 19” x 7U 84TE mixed VME / NIM crate equipped with a 1U
common fan unit.
The VME section features 6 slots suitable for 6Ux160mm boards, with VME64/VME64x
compliant backplane. The section is powered by universal AC input switching Power
Supply (6U 8TE). The Power distribution is 50A@+5V, 1.5A@-12V, 7.5A@+12V.
The NIM section consists of 7 NIM slots (5 free) provided with pluggable 150W power
supply. The Unit is powered by 110 or 220 Vac, 50 ÷ 60 Hz. On the front panel the status
of power supply is indicated by green/red LED.
The Unit is powered by 220 Vac or 115 Vac, 50 ÷ 60 Hz.. Power supply must be
disconnected any time the unit is serviced. The Mod. NV8020 is an equipment for
BUILDING-IN.
Fig. 1.1: The Mod. NV8020 crate
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
4
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
2. Technical specifications
2.1
Technical specification table
Table 2.1: Mod. NV8020 Technical Features
Mechanics
19” x 7U 84TE mixed crate VME64 (6 slots for 6Ux160mm boards) / NIM (5 free slots);
1U common fan unit
Mains input
230 VAC or 115 VAC, 50-60 Hz
Fuse
1 External 16 A, type B/C
1 External 2 A, class T (230 VAC)
Isolation
CE acc. to EN 61010
Efficiency
75% ÷ 85% @ 230 Vac configuration dependent
Section
VME64
NIM
Backplane
J1/J2, VME64X J1/J2 – J1/J0/J2
Automatic daisy chain, CBLT compliant
Equipped with long-life NIM connectors
Max Total Output Power
400W
150W
Output power
50A@+5V,
1.5A@-12V,
7.5A@+12V
5 A @ ±6V
3 A @ ±12 V
1.5 A @ ±24 V
Load Regulation
< 10 mV for 0-100% load change @ +5 V,
< 15 mV for 0-100% load change @ ±12 V
< 0.5 % for 10-100% load change,
< 0.02 % for ±10% line change
Noise and ripple
(backplane connector)
+5V: 100 mVpp
+3.3V: 60 mVpp
±12V: 120 mVpp
±6V < 5 mVpp
±12 V < 8 mVpp
±24 V < 10 mVpp
Power supply type
Telkoor Compact PCI 6U 8HP 400 Watt
AC power supply (see § 3.2)
CAEN Mod. N8315 (see § 4.1)
2.2
Mains Voltage and Connection
The Power supplies are equipped with a “World”- mains input, which works properly form
94VAC up to 264VAC and within a frequency range of 47 to 63Hz. Before connecting to
the mains please double-check correspondence.
Mains input connection at the power supply side is done with a 3-pin “Hirschmann” 16 A
connector or power terminals.
Table 2.2: Hirschmann connector cabling
Hirschmann pin nr.
Signal
Description
Color of the Wire
Pin 1
L
Phase
black or brown
Pin 2
N
Return, Neutral
blue
Pin 3
Earth
not connected
PE
Protective Earth
green/yellow
In order to turn on the unit:
• Connect mains plug to 150W NIM Linear Power Supply
• Switch On the 150W NIM Linear Power Supply (see § 4.1)
• Switch On the NV8020 crate via the front panel with ON/OFF switch
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
5
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
Fig. 2.1: Mod. NV8020 Technical Drawing (front, NIM power supply not present)
Fig. 2.2: Mod. NV8020 Technical Drawing (back)
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
6
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
Fig. 2.3: Mod. NV8020 Technical Drawing (side)
Fig. 2.4: Mod. NV8020 front panel with ON/OFF switch and VME +5V / ±12V LEDs
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
7
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
3. VME Section
The VME section of the NV8020 Crate has 6 slots suitable for 6U boards, with VME64 or
VME64x compliant backplane. The section is powered by universal AC input switching
Power Supply (6U / 8TE).
3.1
Backplane Mechanical Design
The VMEbus is designed for 19-inch rack technology and supports bus lengths of up to
21 slots. In this system, slot 1 is the leftmost, with the rest of the bus extending to the
right.
VME Backplane technical features
- Monolithic (VME64 J1/J2, VME64X J1/J2, VME64X J1/J0/J2)
- 6 slot
- 10 layers
- Strip line technology for maximum data rates (320Mbyte/s, 64bit)
- Actively terminated
- Electrical automatic daisy chain
- CBLT Compliant
3.1.1
Climatic Parameters
Operating temperature –40°C to +85°C
Storage temperature –55°C to +85°C
Climatic conditions according IEC 68/1: 25/085/21
3.1.2
Mechanical Parameters
Flammability
- PCB: UL 94 V-0
- Connectors: UL 94 V-0/–1
Vibration
- According to DIN 41640 Part 15: 10 Hz ÷ 500 Hz 5 g rms
- Impact (10 Impacts per axis x,y,z) 100 g, 6 ms
Connectors DIN 41612, C96 type, class 2 with 400 connection cycles
3.1.3
Electrical parameters
Compliant to VMEbus Specification ANSI/VITA 1-1994
Maximum data transfer rate 80 Mbyte/s for MBLTprotocol and 160 Mbyte/s for
2e-protocol
Ohmic resistance of signal lines < 60 mOhm/Slot
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
8
Document type:
User's Manual (MUT)
3.2
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
Power Supply specifications
Fig. 3.1: VME CPCI Power Supply
CPCI power supply delivering 400W continuous power. Compliant with the PICMG 2.11.
using 2 converters in parallel – one for the 3.3V and one for the 5V enable max. current
draw on the two outputs together.
Table 3.1: VME Power Supply Technical specifications
Input
AC Input Voltage
85÷264 VAC, auto range, single phase
Input Inrush Current
50A max @230 VAC
Input Reflected Ripple
EN55022 Class B with the use of an external line filter
Active Power Factor Correction
0.98 typ. at 230Vac, full load 0.99 typ. at 115Vac, full load
Efficiency @ 230VAC Full Load
>80% typical at 230Vac, full load rated power
Efficiency @ 115VAC Full Load
>76% typical at 120Vac, full load rated power
Input Line Protection
Internal Line Fuse: IEC type, 8A 250Vac quick acting
Hold-up Time
16mSec typical at full load and 220VAC input
Output
V1 / Current
+5VDC / 50A
V2 / Current
+3.3VDC / 80A
V3 / Current
+12VDC / 7.5A
V4 / Current
-12VDC / 1.5A
Total Output Power
400W with 250LFM forced air cooling
Line Regulation
± 0.5%
Hot-Swap
Yes
Current Share
Single Wire – on V1 & V2
Remote Sense (Open sense lines protected)
On +5VDC & +3.3VDC
Over-Voltage Protection
110% - 130% of V1, V2 & V3 with Latched Shut Down
Short Circuit Protection
Available on all outputs
Temperature Protection
Excess Temp will shut down the unit – with Auto Recovery
Load Regulation
V1 & V2
± 1%
V3
± 4%
V4
± 4% With minimum load on 10A on the 3.3V output
Min. Load Requirement
No
Overshoot / Undershoot at Turn-on
Less than 1%
Turn-on Delay
1 Sec Max.
Initial Setting Accuracy
± 1%
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
9
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
Voltage Set Point (Internal trim-pot) V1 / V2
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
± 4%
Ripple @ Noise with 20MHz Bandwidth across 120μF Load Cap. // with 1μF Ceramic Cap.
V1
100mV p-p
V2
60mV p-p
V3 & V4
120mV p-p
Overload Protection
V1 & V2
130% Max.
V3 & V4
200% Max.
Environmental
Temperature
Operation
-5ºC to +55ºC with 300LFM Forced Air Cooling
Storage
-40ºC to +85ºC
Humidity
Up to 95% RH Non-Condensing
Shock & Vibration
Shock: Peak acceleration 10GPK
max. Vibration: Random vibration, 10Hz to 500Hz, 3 axis
1.9GRMS max.
Conducted & Radiated Emission
EN55022/CISPR22 Class B with an external TBD line filter
EN61000-4-5
MTBF
400,000 Hours per Belcore Standard B332 Gb 30º
Dielectric Isolation
Input to Case
1500Vdc.
Input to Output
3000Vdc.
Output to Case
100Vdc.
Safety, Regulations and EMI Specifications
Safety Approvals
UL60950, EN60950 & CE marking
Dielectric Withstand Voltage
1500VDC Input to Output, 3000VDC Input to Chassis
Ground
ESD Susceptibility
EN61000-4-2 level 4 8KV air
Radiated Susceptibility
EN61000-4-3 level 3 10V/m
EFT / Burst
EN61000-4-4 level 3 ±2KV
Input Surge
EN6100 -4-5 level 3 line-to-line 1KV line to chassis 2KV
Conducted Disturbance
EN61000-4-6 level 2 3Vrms
Power frequency magnetic field
EN61000-4-8 3A/m
Monitoring Command & Control
Inhibit
TTL Compatible
Power FAIL (Fit #)
TTL Compatible
Current Share
On V1 & V2 Allows ± 10% Current Share with a Similar Unit
DEG #
Open Collector Activated LOW 10ºC before Thermal ShutDown
Input AC Connector
Standard PICMG 47 Pin Positronics
Remote Sense
On V1 & V2 for Cable Loss
Correction of up to 200mV
Output Connectors V1/ V2
Standard PICMG 47 Pin Positronics
Output Connectors V3/ V4
Standard PICMG 47 Pin Positronics
I²C Data Bus (optional)
Yes for Pre-Programmed Static Parameters
Front Panel Green LED
Inputs OK
Front Panel RED LED
Output Failure
Mechanical Dimensions
Size
6U High 8HP wide 169.6 mm Deep
Weight
1500 gr
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
10
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
4. NIM Section
The NIM section of the NV8020 Crate consists of 7 NIM slots: five free and two reserved
for the pluggable power supply.
4.1
The Mod. N8315 Linear Power supply
Fig. 4.1: Mod. N8315 Linear Power Supply
The Mod. N8315 is a 150W NIM Linear Power supply, suitable to any NIM crate. Safety
features include: short circuit protection, Over/Undervoltage protection, Over temperature
protection. The Unit is powered by 115 or 230 Vac, 50 ÷ 60 Hz. On the front panel the
status of the power supply is indicated by green/red LED. In order to switch from 230
VAC to115 VAC, it is necessary to place the switches on the Crate from 230V to 115V
position, and replace the External 2 A Fuse with an External 4A, class T (115VAC). This
operation MUST be performed with the Crate disconnected from the Mains.
Fig. 4.2: Mod. N8315 Power switch and Status led
4.1.1
Power supply installation
The power supply unit has to be plugged frontally in the two slots at the right side (slot 6
and 7). The backplane is equipped with high-quality long-life NIM connectors, which are
completely parallel-wired. The connector foreseen for the power supply unit (slot 7) has
additional paralleled voltage pins. Before turning on the crate, it is necessary to verify
that the power plug is connected to the N8315 Linear Power supply (see § 2.1).
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
11
Document type:
User's Manual (MUT)
Title:
NV8020 - VME/NIM 7U crate, 6 slot VME64 400W, 5 slot NIM 150W
PRELIMINARY
Revision date:
Revision:
29/01/2010
1
0V=POWER SUPPLIES RETURN (GND)
E=HIGH QUALITY GND (EARTH)
Fig. 4.3: Mod. N8315 Backplane NIM connectors
Table 4.1: Mod. N8315 Linear Power Supply Technical Specifications
Mechanics
2 unit NIM module
Mains input
230 VAC or 115 VAC, 50-60 Hz
Max Total Output Power
150 W
Fuse External
External 2 A, class T (230 VAC)
Output power
5 A @ ±6V ; 3 A @ ±12 V ; 1.5 A @ ±24 V
Load Regulation
< 0.5 % for 10-100% load change, < 0.02 % for ±10% line change; ±6V: <30 mV for 10-100%
load change, <1mV for ±10% line change; ±12 V: <60 mV for 10-100% load change, <2mV
for ±10% line change;±24V: <120 mV for 10-100% load change, <5mV for ±10% line change
Isolation
CE acc. to EN 61010
Ripple
±6V < 5 mVpp ; ±12 V < 8 mVpp ; ±24 V < 10 mVpp
Transient response recovery
0.15 ms for recovery to ±1% of voltage for 10-100% load change
Output Impedance
0.6 mohm static
Output Voltage Characteristic dual tracking for all ±DC outputs; Soft start; DC output calibration (manually)
Output Current Characteristic OVC protection / Trip Off
Over Voltage Protection
Trip Off when the output voltage > 130% of nominal voltage
Under Voltage Protection
Trip Off when the output voltage < 70% of nominal voltage
Over Current Protection
Trip Off when current: > 2 A @ ±24 V, > 4 A @ +12 V, > 3.5 A @ -12 V, > 6 A @ ±6V
Over Temperature Protection
Trip Off when temperature > 75° C
Temperature sensors
nr.1
Status control
Fail/Status LED signal
Switches
Power 1 (On) / 0 (Off)
Operation
0÷45°C without derating
NPO:
00109/09:CNMVM.MUTx/01
Filename:
NV8020_REV1.DOC
Number of pages:
12
Page:
12