LEMO SA
Ch. Des Champs-Courbes 28 - P.O. Box 194
1024 Ecublens - Switzerland
Tel. (++41 21) 695 16 00
Fax (++41 21) 695 16 01
http://www.lemo.com
COPYRIGHT
Copyright © 2012 LEMO. All rights reserved.
LEMO is a registered trademark of LEMO SA.
LEMO USA is a registered trademark of INTERLEMO HOLDING SA.
REDEL® is a registered trademark of LEMO SA.
Unauthorized use or misuse of such trademarks is prohibited.
By accessing and using information from this website you agree to the following terms and conditions:
Copyright
LEMO's website(s) (the "Website") has been created and is maintained for customers and associates. LEMO retains copyright in the entire
text and graphic content of the Website. You may view, download, retain and print copies of files from the Website for personal, noncommercial use. You are not authorized to modify, distribute, repost, or make available on another server any of LEMO web content
without the written permission of LEMO. All other rights are reserved by LEMO.
Content
LEMO uses reasonable efforts to place accurate and up-to-date information about our company and its products on the Website.
HOWEVER, ALL INFORMATION ON THE WEBSITE OR OTHER LINKED SITES IS PROVIDED ON AN "AS IS" BASIS. LEMO GIVES NO
WARRANTY, EXPRESS OR IMPLIED, WITH RESPECT TO ANY INFORMATION PROVIDED ON THE WEBSITE SERVER OR ANY OTHER LEMO
SERVER, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT. LEMO SHALL NOT BE LIABLE FOR ANY DIRECT, SPECIAL, INDIRECT, CONSEQUENTIAL, PUNITIVE OR OTHER
DAMAGES BASED ON USE OF INFORMATION ON OR ACCESSED FROM THE WEBSITE.
LEMO reserves the right to alter, move or delete portions of, or make additions to, the Website from time to time without notice to you.
LEMO also reserves the right to amend or change the terms and conditions of these Copyright & Site Use Terms or the terms of its Privacy
Statement without providing you notice of such changes. Your use of the Website following any such changes constitutes your agreement
to be bound by such changes. LEMO recommends that you read these Copyright & Site Use Terms and the Privacy Statement each time
you visit the Website.
Confidential Information
LEMO does not want to receive information via the Website that is considered confidential or proprietary. Accordingly, all information
provided to LEMO by use of the Website will be treated as NON-CONFIDENTIAL and free of any claims or limitations on use, reproduction,
display or distribution by LEMO.
Jurisdiction and Applicable Law
The information contained on this website shall be deemed provided in the State of California and subject to the internal laws of the State
of California.
PRIVACY POLICY
Thank you for visiting the LEMO website (the "Website"). This privacy policy statement is designed to explain the information LEMO
gathers online and what LEMO does with that information. As LEMO continues to develop the Website, this policy will likely change from
time to time. LEMO encourages you to review the privacy policy periodically.
BY USING THE WEBSITE, YOU ARE AGREEING TO THE TERMS OF THE PRIVACY POLICY IN EFFECT AT THAT TIME. IF YOU DO NOT AGREE
TO ANY TERM OR CONDITION OF THIS PRIVACY POLICY STATEMENT OR LEMO'S TERMS OF USE AGREEMENT, YOU SHOULD
IMMEDIATELY EXIT THIS WEBSITE.
Requests for Information from LEMO (i.e. quotes, samples, catalogs, etc.)
LEMO SA
Ch. Des Champs-Courbes 28 - P.O. Box 194
1024 Ecublens - Switzerland
Tel. (++41 21) 695 16 00
Fax (++41 21) 695 16 01
http://www.lemo.com
When requesting certain information from LEMO, LEMO requires the following C ("Company information") from you:
•
Company Name
•
Contact Name
•
Company/Contact Email
•
Company Address
Once you choose to provide us with Company information, the Company information will only be used to support your customer
relationship with LEMO. LEMO will not sell, rent or otherwise provide your Company information to any third party (except LEMO's Website
service providers which shall be subject to confidentiality agreements with LEMO) without your affirmative consent (either in writing or by
email).
Information LEMO requests from You
Occasionally, LEMO will request Company information from you so LEMO can provide additional information concerning LEMO products
and services. In each such case, you may opt not to receive such information.
Use of Information
LEMO tracks usage while you are using the Website and IP addresses. LEMO uses this information to assess trends, statistics and
customer needs, as well as to administer the Website and to diagnose problems that may occur with LEMO's technical facilities.
Use of Cookies
A "cookie" is a small amount of data that is sent to your browser from a web server and stored on your computer's hard drive. LEMO uses
cookies to speed your access to various areas of LEMO's Website. Cookies will be used when you request information from LEMO, such as
catalogs, technical support, etc. Most browsers are initially set to accept cookies. If you prefer, you can set your browser to refuse
cookies; however, if you do so you must manually input your user ID and password to save your search data.
Security
Unfortunately, no data transmission over the Internet or any wireless network can be guaranteed to be totally secure. LEMO cannot
ensure or warrant the security of any information you transmit to us and you do so at your own risk. Once LEMO receives your
transmission, LEMO uses commercially reasonable efforts to protect its security on our systems.
PRODUCT SAFETY
PLEASE READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY AND CONSULT ALL RELEVANT LOCAL, STATE, NATIONAL AND
INTERNATIONAL SAFETY REGULATIONS FOR YOUR APPLICATION. IMPROPER HANDLING, CABLE ASSEMBLY, OR USE OF CONNECTORS
CAN RESULT IN HAZARDOUS SITUATIONS.
1. SHOCK AND FIRE HAZARD
Incorrect wiring, the use of damaged components, foreign objects (such as metal debris), and / or the presence of residue (such as
LEMO SA
Ch. Des Champs-Courbes 28 - P.O. Box 194
1024 Ecublens - Switzerland
Tel. (++41 21) 695 16 00
Fax (++41 21) 695 16 01
http://www.lemo.com
cleaning fluids), can result in short circuits, overheating, and / or risk of electric shock. Mated components should never be disconnected
while live as this may result in an exposed electric arc and local overheating, resulting in possible damage to components.
2. HANDLING
Connectors and their components should be visually inspected for damage prior to installation and assembly. Suspect components should
be rejected or returned to the factory for verification. Connector assembly and installation should only be carried out by properly trained
personnel. Proper tools must be used during installation and / or assembly in order to obtain safe and reliable performance.
3. USE
Connectors with exposed contacts should never be live (or on the current supply side of a circuit). Often voltages above 30 VAC and 42
VDC are considered hazardous and proper measures should be taken to eliminate all risk of transmission of such voltages to any exposed
metal part of the connector. In medical, chemical, wet or otherwise hazardous environments, or if the product or interface is easily
accessible to children, elderly or disabled people, the voltages generally considered "safe" can be significantly lower and additional limits
for currents and power may exist.
4. TEST AND OPERATING VOLTAGES
The maximum admissible operating voltage depends upon the national or international standards in force for the application in question.
Air and creepage distances impact the operating voltage; reference values are indicated in the catalog however these may be influenced
by PC board design and / or wiring harnesses. The test voltage indicated in the catalog is 75% of the mean breakdown voltage; the test is
applied at 500 V/s and the test duration is 1 minute.
5. CE MARKING
CE Marking is applied only to a complete product or device, and implies that the device complies with one or several European safety
directives. CE Marking can NOT be applied to electromechanical components such as connectors.
6. PRODUCT IMPROVEMENTS
The LEMO Group reserves the right to modify and improve to LEMO's products or specifications without providing prior notification.