Catalog 302 Push Buttons and Pilot Lights, Ø 22,5 mm

advertisement
Catalog 302
Push Buttons and Pilot Lights, Ø 22,5 mm
12/2015
Kraus & Naimer
The development of the Blue Line rotary switch, contactor and motor
starter product ranges is based on more than seventy-five years
experience by Kraus & Naimer in the design and manufacture of
electrical switchgear. Kraus & Naimer pioneered the introduction of
the cam operated rotary switch and continues to be recognized as
the world leader in that product field.
BLUE LINE
Blue Line products are protected by numerous patents throughout the industrial world. They are built to national and international
standards and designed to withstand adverse temperatures and
climates.
Blue Line products are accepted and universally recognized for their
quality and workmanship. They are supported by a worldwide sales
and service organization.
The Kraus & Naimer Registered Trademark
WORLDWIDE SYMBOL
FOR QUALITY SWITCHGEAR
Contents
Page
Programs and Description
2, 3
Complete Standard Units
4, 5
Pre-assembled Front Elements
6, 7
Front Element Components
7, 8
Legend Plates
8, 9
Coupling Plate and Pilot Light Assemblies
Series Elements, Contact Blocks and Enclosures
9
10
Accessories
10-12
Front Plates for Push Buttons
13, 14
Front Plates for Mushroom Push Buttons
15
Color Caps for Pilot Lights
16
Design17
Dimensions18-21
Technical Data
Blue Line Switchgear: Summary
22, 23
24
Programs
Push Buttons and Pilot Lights, 22,5 mm Ø
Push buttons and pilot lights by Kraus & Naimer represent an ideal combination of functional security and economical efficiency in a
modular design.
Push Buttons
• non-illuminated or illuminated
• flush, extended or with extended front ring
• momentary or latched (for converting into spring return function)
Cam Switches
• ON/OFF switches and double-throw switches
• protection IP 65
• for further cam switches, refer to Catalog 120
Pilot Lights
• Standard units flush or conical
• Solid pilot lights (direct wire)
Enclosures
• plastic yellow or gray
• with 1, 2, 3, 4 or 6 positions
Double-Push Buttons
• non-illuminated or illuminated
Legend Options
• front plates and color caps
• legend inserts
Emergency Stop Push Buttons
• fool-proof
• non-illuminated or illuminated
• without and with key
• optional mounting in enclosure
Accessories
• a wide range of accessories are available, e.g. protection shrouds
and protection caps
Reset Push Buttons
• incl. reset rod
Selection
• complete units
• pre-assembled front elements
• individual components
Rotary Switches
• non-illuminated or illuminated
• without and with key
• momentary (for converting into spring return function)
Front
Element
Legend
Plate
Fixation
Ring
Front Elements
• ergonomical design, front rings metallic colored or black
• illuminated elements offer excellent brightest and contrast in all
light conditions
• pilot lights with perfect light due to special lenses
• any inscription, abrasion-resistant by laser
• latched push buttons and rotary switches are convertible into spring
return function
• mushroom push buttons with large points
• high protection and food resistance: push buttons and pilot lights
IP 67/IP 69K, double-push buttons and rotary switches IP 66
• for special operating available with protection caps
Legend Plates
• for front elements and double-push buttons
• with legend inserts
• available with lasered or engraved inscription
Fixation Nut
• is part of the front element
• nut key for fixation nut as accessories
Coupling Plate
• for contact blocks and LED pilot light assemblies
• for max. 3 elements per contact level
• up to 6 contacts on 2 contact levels are possible
2
Coupling
Plate
Contact Blocks
LED Pilot Light
Assemblies
Contact Blocks and LED Pilot Light Assemblies
• finger-proof and open terminals (IP 20)
• captive mounting screws
• low overall depth, for mounting in commercial plaster depth box
Contact Blocks
• available as N/C and N/O
• high switching capacity, both in AC-15- and DC-13-operation
(technical data see page 22)
LED Pilot Light Assemblies
• in green, red and white color
• long life (100 000 running hours) by especially low power consumption and vibration resistance
• with only 2 voltage ranges the worldwide common applications
are covered
• for decoupled function control LED series elements are available
Program Completion
For extensive and complicated switching programs we recommend
the use of cam switches size S00 described in Catalog 120. The
design and appearance closely match the described push buttons
and pilot lights.
Order Information
By changing the order text from P SN to P SB the unit will be
specified with black front ring.
< back to table of contents >
Environmentally compatible Materials
• cadmium and asbestos-free
• recyclable
Potentiometer
• incl. resistor
Description
Push Buttons and Pilot Lights, 22,5 mm Ø
The modular design of the series push buttons and pilot lights meets your personal requirements in every respect.
Front Elements
Push buttons non-illuminated
Push buttons illuminated
Front element
flush
Front plate
extended
Front element
extended
Front plate
flush
Mushroom push buttons
< back to table of contents >
Front plate
flush
Front element
flush
Front element
extended
Rotary switches
Front element
pre-assembled
Front plate
Front plate
extended
non-illuminated
Front elements
pre-assembled
illuminated
Front elements
pre-assembled
key operated
Double-push buttons
Front elements
pre-assembled
Emergency stop push buttons
Front element
pre-assembled
Front elements
pre-assembled
Complete Standard Units
Pilot lights
Solid pilot lights
Color caps
extended
(conical)
available with
flush or extended
color cap
Color caps
flush
Contact Blocks and LED Pilot Light Assemblies
Potentiometer
incl. resistor
LED pilot light
assembly
Cam switches
Coupling
plate
LED series
elements
Contact block
3
Complete Standard Units
Push Buttons
Pilot Lights
Code
Push buttons flush, IP 67/IP 69K
non-illuminated
Rotary Switches
Code
Double-Push Buttons, Potentiometer
Rotary switches, IP 66
non-illuminated, latched
(changeable by coding pieces to spring return function)
13
P SN-WD0001
green
21
P SN-WD0002
red
P SN/WRK-K10
2 positions
14
13
0
22
14
13
green I
P SN/D/G/X1-K10
14
21
red h
P SN/D/R/X0-K01
P SN/WRK3-K20
3 positions
0
22
13 23
14 24
Pilot lights flush, IP 67/IP 69K
with LED element
0
P SN-WD0003
red
12 V-30 V AC/DC
P SN-WD0004
green
85 V-264 V AC
P SN-WD0005
red
85 V-264 V AC
P SN-WD0006
Double-push buttons, IP 67/IP 69K
with LED element, color cap opaque
85 V-264 V AC
13
green I
14
21
red h
P SN/DDL/GR/
X1-X0-K11
22
Solid pilot lights, IP 67/IP 69K
for direct wire (without bulb), bulb holder BA 9s
flush
green
P SN/LC/G
red
P SN/LC/R
yellow
P SN/LC/Y
blue
P SN/LC/B
1 kΩ
opaque
P SN/LC/W
4,7 kΩ
Potentiometer, IP 66
3 separate screw terminals, Pmax. = 0,5 W
P SN/R1K
P SN/R4K7
10 kΩ
P SN/R10K
extended (conical)
green
P SN/LCH/G
red
P SN/LCH/R
yellow
P SN/LCH/Y
blue
P SN/LCH/B
opaque
P SN/LCH/W
Other resistance values on request.
4
< back to table of contents >
green
12 V-30 V AC/DC
Complete Standard Units
Emergency Stop Push Buttons
Code
Emergency stop push buttons, IP 66/IP 69K
fool-proof acc. to ISO 13850/EN 418
reset by pulling
complement max: 4 contact blocks
Cam Switches
Code
Cam switches, IP 65
ON/OFF switches
1 pole
CG4 A200-600
FS1
21
P SN/PV-K01
red
22
13 21
P SN/PV-K11
red
CG4 A290-600
FS1
14 22
reset by key operation
1 key, locking MS1
Double-throw switches
21
P SN/PVS-K01
red
22
< back to table of contents >
1 pole
2 pole
CG4 A210-600
FS1
CG4 A211-600
FS1
top yellow, bottom black
reset by pulling
complement max: 3 contact blocks
Double-throw switches with
spring return to center
1 pole
13 21
P SN/PV-KC11-IY
red
14 22
11 21
P SN/PV-KC02-IY
red
CG4 A214-600
FS1
12 22
foot and palm switch, IP 67/IP 69K
top yellow, bottom black
reset by pulling
Double-throw switches with
electrically isolated contacts
1 pole
21
P FT/R-V-KC01-IY
red
22
CG4 A710-600
FS1
For further cam switches, refer to Catalog 120.
5
Pre-assembled Front Elements
Push Buttons
Pilot Lights
Code
Push buttons, IP 67/IP 69K
Rotary Switches
Double-Push Buttons
Code
Rotary switches, IP 66
switching angle 60°, latched1
flush, non-illuminated
green
P SN/D/G
red
P SN/D/R
green I
P SN/D/G/X1
red h
P SN/D/R/X0
P SN/WRK
2 positions, non-illuminated
P SN/WKV
flush, illuminated
P SN/DL/G
red
P SN/DL/R
green I
P SN/DL/G/X1
red h
P SN/DL/R/X0
2 positions, illuminated
Push buttons, IP 67/IP 69K extended,
non-illuminated
green
P SN/DH/G
red
P SN/DH/R
3 positions, illuminated
extended, illuminated
green
P SN/DLH/G
red
P SN/DLH/R
green
P SN/WRLK/G
red
P SN/WRLK/R
yellow
P SN/WRLK/Y
blue
P SN/WRLK/B
opaque
P SN/WRLK/W
green
P SN/WRLK3/G
red
P SN/WRLK3/R
yellow
P SN/WRLK3/Y
blue
P SN/WRLK3/B
opaque
P SN/WRLK3/W
Rotary switches, key operated, IP 66
switching angle 60°, latched1
1 key, locking MS1
Pilot lights, IP 67/IP 69K
flush
2 positions
green
P SN/L/G
red
P SN/L/R
yellow
P SN/L/Y
blue
P SN/L/B
opaque
P SN/L/W
key can be removed in h I
P SN/WRS
key can be only removed in h
P SN/WRS/A1
3 positions
extended (conical)
key can be removed in I h II
P SN/WRS3
key can be only removed in h
P SN/WRS3/A1
Double-push buttons, IP 67/IP 69K
color cap opaque
green
P SN/LH/G
red
P SN/LH/R
yellow
P SN/LH/Y
green
blue
P SN/LH/B
red
opaque
P SN/LH/W
green
P SN/DDL/GR
red
I
h
P SN/DDL/GR/X1-X0
green
START
P SN/DDL/GR/GB1-GB0
red
STOP
black
P SN/DDL/S/X7-X7
black
1
6
changeable by coding pieces to spring return function (40° switching angle)
< back to table of contents >
P SN/WRK3
3 positions, non-illuminated
green
Pre-assembled Front Elements
Emergency Stop Push Buttons
Reset Units
Front Element Components
Code
Push Buttons
Front Plates
Code
Push buttons, IP 67/IP 69K
without front plate
with flush front ring, non-illuminated
Emergency stop push buttons
IP 67/IP 69K (turning)
IP 66/IP 69K (pulling)
fool-proof acc. to ISO 13 850/EN 418
complement max.: 4 contact blocks
momentary
P SN/D/X
latched
P SN/DR/X
non-illuminated
reset by pulling
red
P SN/PV
reset by turning
red
P SN/PVT
Push buttons, IP 67/IP 69K
without front plate
with extended front ring, non-illuminated
< back to table of contents >
illuminated
reset by pulling
red
P SN/PVL
reset by turning
red
P SN/PVLT
momentary
P SN/DG/X
green
P SN/XD/G
red
P SN/XD/R
yellow
P SN/XD/Y
blue
P SN/XD/B
white
P SN/XD/W
black
P SN/XD/S
Front plates, flush
reset by key operation
1 key, locking MS1
P SN/PVS
red
legends see
page 13
Front plates, extended
green
P SN/XDH/G
red
P SN/XDH/R
yellow
P SN/XDH/Y
P SN/DZ/B/GB14
blue
P SN/XDH/B
P SN/DZ/B/X6
white
P SN/XDH/W
black
P SN/XDH/S
Reset units, IP 67/IP 69K
non-illuminated
blue
RESET
blue
R
legends see
page 13
7
Front Element Components and Legend Plates
Code
Mushroom push buttons, IP 67/IP 69K
without front plate
momentary
Front Plates, Pilot Lights
Color Caps, Emergency Stop Plates
Code
Front plates, flush
green
P SN/DP/G/X
red
P SN/DP/R/X
yellow
P SN/DP/Y/X
black
P SN/DP/S/X
P SN/DRP/G/X
red
P SN/DRP/R/X
yellow
P SN/DRP/Y/X
black
P SN/DRP/S/X
P SN/XDP/G
red
P SN/XDP/R
yellow
P SN/XDP/Y
white
P SN/XDP/W
black
P SN/XDP/S
red
P SN/XDL/R
yellow
P SN/XDL/Y
blue
P SN/XDL/B
opaque
P SN/XDL/W
Front plates, extended
Front plates
green
P SN/XDL/G
legends see
page 14
latched
green
green
green
P SN/XDLH/G
red
P SN/XDLH/R
yellow
P SN/XDLH/Y
blue
P SN/XDLH/B
opaque
P SN/XDLH/W
legends see
page 14
Pilot light, IP 67, IP 69K
flush, without color cap
P SN/L/X
legends see
page 15
Push buttons, IP 67/IP 69K
without front plate
with flush front ring, illuminated
Color caps
momentary
P SN/DL/X
latched
P SN/DRL/X
green
P SN/XL/G
red
P SN/XL/R
yellow
P SN/XL/Y
blue
P SN/XL/B
opaque
P SN/XL/W
legends see
page 16
Emergency stop plates, IP 66
rectangular
33 mm x 50 mm
Push buttons, IP 67/IP 69K
without front plate
with extended front ring, illuminated
momentary
German
P SN/XZK/D99
English
P SN/XZK/GB99
50 mm x 50 mm
P SN/XYK1
P SN/DGL/X
square, in four languages
8
< back to table of contents >
Mushroom Push Buttons
Front Plates, Push Buttons
Legend Plates, Coupling Plate and Pilot Light Assemblies
Emergency Stop Plates
Legend Carrier, Legend Insert
Code
Legend Plates, Coupling Plate
LED Pilot Light Assemblies
Legend plates, IP 66
complete standard unit
Code
Emergency stop plates, IP 66
round, in four languages
Ø 90 mm
I
P SB/ST/X88
P SN/XAK1
0 I
P SB/ST/X89
Ø 60 mm
P SN/XBK1
I
P SB/ST/X93
0
Legend carrier, IP 66
without plate
< back to table of contents >
for push buttons
0
II
STOP
P SB/ST/GB0
START
P SB/ST/GB1
Aus
P SB/ST/D5
OFF
P SB/ST/GB5
Ein
P SB/ST/D6
ON
P SB/ST/GB6
Störung
P SB/ST/D8
FAULT
P SB/ST/GB8
Betrieb
P SB/ST/D7
RUN
P SB/ST/GB7
HAND AUTO
P SB/ST/D11
P SB/ST/X
MAN. AUTO
P SB/ST/GB11
Aus
Ein
P SB/ST/D10
OFF
ON
P SB/ST/GB10
HAND 0 AUTO
P SB/ST/D12
MAN. 0 AUTO
P SB/ST/GB12
Coupling plate
P SN/A
for double-push
buttons
P SB/STDD/X
LED pilot light assemblies
front mounting
12 V-30 V AC/DC
green
P SN/LED/G
red
P SN/LED/R
1
white
P SN/LED/W
85 V-264 V AC
Legend insert
P SN/XST
green
P SN/LED230/G
red
P SN/LED230/R
white1
P SN/LED230/W
base mounting
12 V-30 V AC/DC
green
P SN/LEDC/G
red
P SN/LEDC/R
1
white
P SN/LEDC/W
85 V-264 V AC
green
P SN/LEDC230/G
red
P SN/LEDC230/R
white1
P SN/LEDC230/W
1
can be combined with blue, yellow or white pilot lights
9
Series Elements, Contact Blocks, Enclosures and Accessories
LED Series Elements
Contact Blocks, Enclosures
Code
Enclosures
Blanking Plug, Lamps
Code
Plastic enclosure, IP 67/IP 69K
totally insulated, lid screws made of stainless steel
LED series elements
for front mounting and base mounting
resistor element for
42 V-60 V AC/DC
for pilot light
assemblies
12 V-30 V AC/DC
top gray, bottom black
P SN/XLED60
control positions
Ø 22,5 mm
P SN/I1
1
LED test elements
for decoupled
operational test
for connecting to:
12 V-30 V AC/DC
P SN/XLED/T
85 V-264 V AC
P SN/XLED230/T
Contact blocks
front mounting
top gray, bottom black
control positions
Ø 22,5 mm
3
P SN/K10
4
1
2
P SN/I2
3
P SN/I3
4
P SN/I4
6
P SN/I6
2
Blanking plug, IP 67/IP 69K
gray, for surplus control positions
for plastic enclosures
3
P SN/KC10
4
P SN/B
1
P SN/KC01
2
Lamps, BA 9s
for solid pilot lights
filament bulbs
6 V
2W
P SN/GL6
Plastic enclosure, IP 67/IP 69K
totally insulated, lid screws made of stainless steel
12 V
2W
P SN/GL12
top yellow, bottom black
24 V
2W
P SN/GL24
48 V
2W
P SN/GL48
60 V
2W
P SN/GL60
control positions
Ø 22,5 mm
1
P SN/IY1
110 V-130 V
2,4 W
P SN/GL130
110 V-130 V AC
0,1 W
P SN/GIL110K
220 V-240 V AC 0,33 W
P SN/GIL220K
neon bulbs
10
< back to table of contents >
P SN/K01
Accessories
Bulb Extractor
Protection Caps
Code
Bulb extractor
P SN/LG
Protective Shrouds
Rod Link, Coding Pieces
Code
Protective shroud, IP 66
protection against accidental operation
for push buttons and rotary switches
(cannot be combined with legend plates)
P SN/XGWK
Protection caps, IP 67
transparent, for aggravating environments
(not in food areas)
(cannot be combined with legend plates)
Protective shroud, IP 65
yellow, for emergency stop buttons
(cannot be combined with legend plates)
P SN/XGPV
< back to table of contents >
push buttons, flush
pilot lights, flush
double-push buttons
P SN/T/D
P SN/T/DD
Rod link
for operating the middle contact block of nonilluminated rotary switches with 3 positions
P SN/XW
Protection cap
prevents dirt and dust from getting into the keyhole (not food resistant)
rotary switches,
key operated
Coding pieces
for rotary switches to convert the latched function
into spring return function (1 kit = 2 pieces)
P SN/XWS
P SN/XC/Y
11
Accessories
Code
Track adapter
for tracks acc. to EN 60715
for front mounted units
Fixation Nut
Spare Key
Code
Fixation nut
for push buttons, pilot lights and rotary switches
P SN/IVS
Nut key
for push buttons, pilot lights and rotary switches
P SN/GR
for cam switches
P SN/MS
S00 T170 10
for cam switches
Spare key
locking MS1
S00 T170 09
12
P SN/ES/MS1
< back to table of contents >
Track Adapter
Nut Key
Front Plates for Push Buttons
< back to table of contents >
Front Plates for Push Buttons
non-illuminated
Symbol
Meaning
Code
Code
Front Plates
flush
Front Plates
extended
Color
Legend
black
Zu
P SN/XD/S/D2
P SN/XDH/S/D2
Auf
P SN/XD/S/D3
P SN/XDH/S/D3
Ab
P SN/XD/S/D4
P SN/XDH/S/D4
red
Aus
P SN/XD/R/D5
P SN/XDH/R/D5
black
Ein
P SN/XD/S/D6
P SN/XDH/S/D6
blue
Entsperren
P SN/XD/B/D14
P SN/XDH/B/D14
black
Vorwärts
P SN/XD/S/D15
P SN/XDH/S/D15
Rückwärts
P SN/XD/S/D16
P SN/XDH/S/D16
Heben
P SN/XD/S/D17
P SN/XDH/S/D17
Senken
P SN/XD/S/D18
P SN/XDH/S/D18
red
STOP
P SN/XD/R/GB0
P SN/XDH/R/GB0
black
STOP
P SN/XD/S/GB0
P SN/XDH/S/GB0
green
START
P SN/XD/G/GB1
P SN/XDH/G/GB1
white
START
P SN/XD/W/GB1
P SN/XDH/W/GB1
black
CLOSE
P SN/XD/S/GB2
P SN/XDH/S/GB2
UP
P SN/XD/S/GB3
P SN/XDH/S/GB3
DOWN
P SN/XD/S/GB4
P SN/XDH/S/GB4
red
OFF
P SN/XD/R/GB5
P SN/XDH/R/GB5
black
ON
P SN/XD/S/GB6
P SN/XDH/S/GB6
TEST
P SN/XD/S/GB9
P SN/XDH/S/GB9
blue
RESET
P SN/XD/B/GB14
P SN/XDH/B/GB14
black
FORWARD
P SN/XD/S/GB15
P SN/XDH/S/GB15
REVERSE
P SN/XD/S/GB16
P SN/XDH/S/GB16
RAISE
P SN/XD/S/GB17
P SN/XDH/S/GB17
P SN/XD/S/GB18
P SN/XDH/S/GB18
P SN/XD/R/X0
P SN/XDH/R/X0
P SN/XD/S/X0
P SN/XDH/S/X0
P SN/XD/G/X1
P SN/XDH/G/X1
LOWER
red
h
black
h
green
I
black
I
P SN/XD/S/X1
P SN/XDH/S/X1
white
I
P SN/XD/W/X1
P SN/XDH/W/X1
green
II
P SN/XD/G/X2
P SN/XDH/G/X2
black
II
P SN/XD/S/X2
P SN/XDH/S/X2
blue
black
stop
start
+
increase
P SN/XD/S/X4
P SN/XDH/S/X4
-
decrease
P SN/XD/S/X5
P SN/XDH/S/X5
R
reset
P SN/XD/B/X6
P SN/XDH/B/X6
guide motion
P SN/XD/S/X7
P SN/XDH/S/X7
P SN/XD/S/X8
P SN/XDH/S/X8
hand-control
P SN/XD/S/X9
P SN/XDH/S/X9
automatic cycle
P SN/XD/S/X10
P SN/XDH/S/X10
inching
P SN/XD/S/X11
P SN/XDH/S/X11
disengaging
P SN/XD/S/X12
P SN/XDH/S/X12
unlock
P SN/XD/S/X13
P SN/XDH/S/X13
tighten
P SN/XD/S/X14
P SN/XDH/S/X14
release
P SN/XD/S/X15
P SN/XDH/S/X15
liquid
P SN/XD/S/X16
P SN/XDH/S/X16
horn
P SN/XD/S/X17
P SN/XDH/S/X17
13
Front Plates for Push Buttons
Symbol
Meaning
Code
Code
Front Plates
flush
Front Plates
extended
Color
Legend
opaque
Zu
P SN/XDL/W/D2
P SN/XDLH/W/D2
Auf
P SN/XDL/W/D3
P SN/XDLH/W/D3
Ab
P SN/XDL/W/D4
P SN/XDLH/W/D4
red
Aus
P SN/XDL/R/D5
P SN/XDLH/R/D5
opaque
Ein
P SN/XDL/W/D6
P SN/XDLH/W/D6
blue
Entsperren
P SN/XDL/B/D14
P SN/XDLH/B/D14
opaque
Vorwärts
P SN/XDL/W/D15
P SN/XDLH/W/D15
Rückwärts
P SN/XDL/W/D16
P SN/XDLH/W/D16
Heben
P SN/XDL/W/D17
P SN/XDLH/W/D17
Senken
P SN/XDL/W/D18
P SN/XDLH/W/D18
red
STOP
P SN/XDL/R/GB0
P SN/XDLH/R/GB0
opaque
STOP
P SN/XDL/W/GB0 P SN/XDLH/W/GB0
green
START
P SN/XDL/G/GB1
opaque
START
P SN/XDL/W/GB1 P SN/XDLH/W/GB1
CLOSE
P SN/XDL/W/GB2 P SN/XDLH/W/GB2
UP
P SN/XDL/W/GB3 P SN/XDLH/W/GB3
P SN/XDLH/G/GB1
DOWN
P SN/XDL/W/GB4 P SN/XDLH/W/GB4
red
OFF
P SN/XDL/R/GB5
opaque
ON
P SN/XDL/W/GB6 P SN/XDLH/W/GB6
TEST
P SN/XDL/W/GB9 P SN/XDLH/W/GB9
blue
RESET
P SN/XDL/B/GB14 P SN/XDLH/B/GB14
opaque
FORWARD
P SN/XDL/W/GB15 P SN/XDLH/W/GB15
REVERSE
P SN/XDL/W/GB16 P SN/XDLH/W/GB16
RAISE
P SN/XDL/W/GB17 P SN/XDLH/W/GB17
LOWER
P SN/XDL/W/GB18 P SN/XDLH/W/GB18
red
h
opaque
h
green
I
stop
start
P SN/XDLH/R/GB5
P SN/XDL/R/X0
P SN/XDLH/R/X0
P SN/XDL/W/X0
P SN/XDLH/W/X0
P SN/XDL/G/X1
P SN/XDLH/G/X1
opaque
I
P SN/XDL/W/X1
P SN/XDLH/W/X1
green
II
P SN/XDL/G/X2
P SN/XDLH/G/X2
opaque
blue
opaque
14
II
P SN/XDL/W/X2
P SN/XDLH/W/X2
+
increase
P SN/XDL/W/X4
P SN/XDLH/W/X4
-
decrease
P SN/XDL/W/X5
P SN/XDLH/W/X5
R
reset
P SN/XDL/B/X6
P SN/XDLH/B/X6
guide motion
P SN/XDL/W/X7
P SN/XDLH/W/X7
P SN/XDL/W/X8
P SN/XDLH/W/X8
hand-control
P SN/XDL/W/X9
P SN/XDLH/W/X9
automatic cycle
P SN/XDL/W/X10
P SN/XDLH/W/X10
inching
P SN/XDL/W/X11
P SN/XDLH/W/X11
disengaging
P SN/XDL/W/X12
P SN/XDLH/W/X12
unlock
P SN/XDL/W/X13
P SN/XDLH/W/X13
tighten
P SN/XDL/W/X14
P SN/XDLH/W/X14
release
P SN/XDL/W/X15
P SN/XDLH/W/X15
liquid
P SN/XDL/W/X16
P SN/XDLH/W/X16
horn
P SN/XDL/W/X17
P SN/XDLH/W/X17
< back to table of contents >
Front Plates for Push Buttons
illuminated
Front Plates for Mushroom Push Buttons
< back to table of contents >
Front Plates for Mushroom Push Buttons
Code
Color
Legend
Symbol
Meaning
black
Zu
P SN/XDP/S/D2
Auf
P SN/XDP/S/D3
Ab
P SN/XDP/S/D4
red
Aus
P SN/XDP/R/D5
black
Ein
P SN/XDP/S/D6
Vorwärts
P SN/XDP/S/D15
Rückwärts
P SN/XDP/S/D16
Heben
P SN/XDP/S/D17
Senken
P SN/XDP/S/D18
red
STOP
P SN/XDP/R/GB0
black
STOP
P SN/XDP/S/GB0
green
START
P SN/XDP/G/GB1
white
START
P SN/XDP/W/GB1
black
CLOSE
P SN/XDP/S/GB2
UP
P SN/XDP/S/GB3
DOWN
P SN/XDP/S/GB4
red
OFF
P SN/XDP/R/GB5
black
ON
P SN/XDP/S/GB6
TEST
P SN/XDP/S/GB9
FORWARD
P SN/XDP/S/GB15
REVERSE
P SN/XDP/S/GB16
RAISE
P SN/XDP/S/GB17
LOWER
P SN/XDP/S/GB18
red
h
black
h
green
I
black
I
P SN/XDP/S/X1
white
I
P SN/XDP/W/X1
green
II
P SN/XDP/G/X2
black
II
P SN/XDP/S/X2
stop
P SN/XDP/R/X0
P SN/XDP/S/X0
start
P SN/XDP/G/X1
+
increase
P SN/XDP/S/X4
-
decrease
P SN/XDP/S/X5
guide motion
P SN/XDP/S/X7
P SN/XDP/S/X8
hand-control
P SN/XDP/S/X9
automatic cycle
P SN/XDP/S/X10
inching
P SN/XDP/S/X11
disengaging
P SN/XDP/S/X12
unlock
P SN/XDP/S/X13
tighten
P SN/XDP/S/X14
release
P SN/XDP/S/X15
liquid
P SN/XDP/S/X16
horn
P SN/XDP/S/X17
15
Color Caps for Pilot Lights
Color Caps for Pilot Lights
flush
Code
Legend
Meaning
opaque
Zu
P SN/XL/W/D2
Auf
P SN/XL/W/D3
Ab
P SN/XL/W/D4
red
Aus
P SN/XL/R/D5
opaque
Ein
P SN/XL/W/D6
Vorwärts
P SN/XL/W/D15
Rückwärts
P SN/XL/W/D16
Heben
P SN/XL/W/D17
Senken
P SN/XL/W/D18
red
STOP
P SN/XL/R/GB0
opaque
STOP
P SN/XL/W/GB0
green
START
P SN/XL/G/GB1
opaque
START
P SN/XL/W/GB1
CLOSE
P SN/XL/W/GB2
UP
P SN/XL/W/GB3
DOWN
P SN/XL/W/GB4
red
OFF
P SN/XL/R/GB5
opaque
ON
P SN/XL/W/GB6
TEST
P SN/XL/W/GB9
FORWARD
P SN/XL/W/GB15
REVERSE
P SN/XL/W/GB16
RAISE
P SN/XL/W/GB17
LOWER
P SN/XL/W/GB18
red
h
opaque
h
green
I
opaque
I
P SN/XL/W/X1
green
II
P SN/XL/G/X2
opaque
II
P SN/XL/W/X2
stop
P SN/XL/R/X0
P SN/XL/W/X0
start
P SN/XL/G/X1
+
increase
P SN/XL/W/X4
-
decrease
P SN/XL/W/X5
guide motion
P SN/XL/W/X7
P SN/XL/W/X8
16
hand-control
P SN/XL/W/X9
automatic cycle
P SN/XL/W/X10
inching
P SN/XL/W/X11
disengaging
P SN/XL/W/X12
unlock
P SN/XL/W/X13
tighten
P SN/XL/W/X14
release
P SN/XL/W/X15
liquid
P SN/XL/W/X16
horn
P SN/XL/W/X17
< back to table of contents >
Symbol
Front Plates
flush
Color
Design
Programming and Circuit Design
Programming for converting the latched function into spring return function
Push buttons
Rotary switches
Rod link for operating the middle contact block of
non-illuminated rotary switches with 2 and 3 positions
B
P SN/XC/Y
A
P SN/XC/Y in B
O
I
O
I
II
II
P SN/XC/Y in A and B
Key cannot be removed in spring return position
Ue ~/
12 – 30 V ~/
R
1
R
2 1
R
2 1
X1
2
X2
H1
P SN/XLED60
P SN/XLED60
1x
2x
3x
4x
5x
6x
7x
Ue ≤
60 V
90 V
120 V
150 V
180 V
210 V
240 V
P SN/LED(C)/...
LED test element
P SN/XLED/T
K1
13
K2
14
12 – 30 V ~/
13
K3
14
2
13
P SN/K(C)10
3
ST
14
4
1
V1
2
1
V2
2
X1
H1
X1
H2
1
X1
V3 P SN/XLED/T
X2
P SN/LED(C)/...
H3
X2
X2
P SN/XLED230/T
Ue ~
P SN/K(C)10
85 – 264 V~,
50 – 60 Hz
L1
K1
13
K2
14
85 – 264 V ~/50 – 60 Hz
< back to table of contents >
LED resistor element
P SN/XLED60
13
K3
14
13
ST
14
3
1
4
2
C1
2 1
C2
2 1
H1
X1
H2
X2
1
C
2 1
2
X1
X1
C3
X2
H1
P SN/XLED230/T
2 1
X1
C
P SN/K(C)01
P SN/LED(C)230/...
P SN/XLED230/T
1x
2x
Ue ≤
400 V AC
500 V AC
P SN/XLED230/T
H3
X2
X2
P SN/LED(C)230/...
N
17
mm
inch
Dimensions
Operating and Indicator Devices, Push Buttons, Rotary Switches, Rotary Switches key operated, Pilot Lights,
Push Buttons illuminated, Mushroom Push Buttons, Solid Pilot Lights, Emergency Stop Push Button, Potentiometer
29,5
Ø
1.16” dia
Ø 29,7
1.17” dia
Operating and indicator devices
29,7
1.17”
1–6
.04” – .24”
19
.75”
Push buttons
P SN/D
P SN/DG(L)
P SN/DD
10
.39”
16,4
.65”
16,5
.65”
13,2
.52”
Rotary switches key operated
P SN/WRS
Ø 29,7
1.17” dia
Rotary switches
P SN/W(R)K...
P SN/W(R)LK...
Push buttons P SN/D
base mounting
54,7
2.15”
Ø 29,7
1.17” dia
P SN/DH
< back to table of contents >
10
.39”
20,6
.81”
47,75
1.88”
26,9
1.06”
P SN/L
Push buttons illuminated
P SN/DL
P SN/DLH
11,5
.45”
10
.39”
Mushroom push buttons
P SN/DP
Ø 36,5
1.44” dia
Pilot lights
P SN/LH
18
41
1.61”
22
.87”
22
.87”
11,5
.45”
Emergency stop push button
P SN/PV.
P SN/PVT.
P SN/PVL.
P SN/PVS
P SN/LCH...
18
.71”
Potentiometer
P SN/R...K
35
1.38”
Solid pilot lights
P SN/LC...
23,6
.93”
16,4
.65”
41
1.61”
75,1
2.96”
47,9
1.89”
38
1.50”
18
.71”
29,2
1.15”
32,9
1.30”
Dimensions
mm
inch
Front Mounting
Pilot lights and illuminated push buttons
37
1.46”
.76”
19,3
21,5
.85”
Fixing adapter
P SN/A
30
1.18”
45
1.77”
30
1.18”
Track adapter
64,5
2.54”
54,5
2.15”
P SN/D...
P SN/L...
P SN/W...
P SN/P...
45
1.77”
71
2.80”
30
1.18”
3,1
.12”
56,7
2.23”
35,2
1.39”
4,5 (M4)
.18”
22,4
.88”
Plastic enclosure
Ø 94
3.70” dia
M20
M20
80
6,5 – 7,5
.26” – .30”
66.5
Foot and palm switches
P FT/R-V-KC01-IY
44
10 10 10
.39” .39” .39”
101
3.98”
e
33
M4
b
a
18
.71”
17.8
¿
3xM20 (PG13,5)
1xM16 on base
M5x20
56
➀
M20/M25
40
1.57”
< back to table of contents >
37,2
1.46”
22,4
.88”
Push buttons with P SN/K...
Push buttons with P SN/LED... + P SN/XLED...
M20
M20
48
65
2.56”
85
3.35” sq
Type
Control a
positions
b
e
Cable entries
P SN/I (Y)1
P SN/I2
P SN/I3
P SN/I4
P SN/I6
42,6
85,6
118,6
151,6
217,6
58,5
106,5
139,5
172,5
238,5
2xM16 3xM20 2xM25
2xM20 3xM20 2xM25
2xM20 2xM25 4xM20
2xM20 2xM25 4xM20
2xM20 2xM25 4xM20
1
2
3
4
6
72
120
153
186
252
19
Dimensions
mm
inch
Legend Carrier
Legend carrier
P SB/ST
Mounting drilling with slot
P SB/STDD
24,1 +0.4
0
27,5
1.08”
.95” +.02”
0
47
1.85”
35
1.38”
.59”
15
3,2
.13”
30
1.18”
22,3
30
1.18”
Grid dimension acc. to
IEC/EN 60947
+0.4
0
+.02”
.88” 0
Grid dimension for different combinations
1–6
.04” – .24”
Protection cap with legend carrier
cannot be combined
50
1.97”
B
P SN/...(IEC/EN 60947)
P SN/...
P SN/D... + P SN/T/D
P SN/D(R)P...
P SN/PV...
P SN/PV(L...)(S...) + P SN/D...
P SN/DDL...
P SN/DDL... + P SN/T/DD
P SB/ST
P SB/STDD
P SN/XAK...
P SN/XZK...
P SN/XBK...
P SN/XYK...
A
30
1.18”
Grid dimension for P SN/DD...
Grid dimension for P SN/DD...
with protection cap P SN/T/DD
30
1.18”
20
b ≥ 58
2.28”
b ≥ 46
1.81”
63
2.48”
75
2.95”
a ≥ 33
1.30”
30
30
33
38
38
33
30
33
30
30
90
33
60
50
Protection cap and protection shroud
with legend carrier cannot be combined
1.18
1.18
1.30
1.50
1.50
1.30
1.18
1.30
1.18
1.18
3.54
1.30
2.36
1.97
50
40
40
40
40
40
55
58
50
75
90
52
60
50
1.97
1.57
1.57
1.57
1.57
1.57
2.17
2.28
1.97
2.95
3.54
2.05
2.36
1.97
< back to table of contents >
TypeA≥
B≥
mminch mminch
Dimensions
mm
inch
Blanking Plug, Protection Caps, Protective Shroud, Emergency Stop Plates, Cam Switches
Blanking plug
P SN/B
Protection cap
P SN/T/D
58
2.28”
17
.67”
29,5
1.16”
Protection cap
P SN/T/DD
33
1.30”
17
.67”
33
1.30”
23
.91”
Protective shroud
P SN/XGWK
20
.79”
R
1. 41
61
”
25
.98”
5
.2”
Ø 36
1.42” dia
12
.47”
78
3.07”
Emergency stop plates
P SN/XAK
Ø 25
.98” dia
50
1.97”
P SN/XBK...
33
1.30”
50
1.97”
12,5
.49”
.8
.65”
16,5
50
1.97”
Ø
d = 0,8
.03”
P SN/XYK1
3,2
.13”
2
9” 2,5
di
a
P SN/XZK...
50
1.97”
60
2.36” dia
Ø
90
3.54”
Cam switches
.638"
0
+ .008"
0
0
24,1
22,3
.878"
+ 0.4
0
+ .016"
0
+ .016"
+ 0.4
0
0
+ 0.2
BCD
0
+ .008"
0
.949"
.126"
+ .008"
+ 0.2
17,9
16,2
+ 0.2
3,2
+ 0.2
1,7 0
+
.067" .008"
0
.705"
< back to table of contents >
Protection cap
P SN/XWS
P SN/XGPV
M
285 29,5 12,5
1.1
.2
1.16
.49
L 1 stage L 2 stages
38,5
1.52
50,5
1.99
0
21
Technical Data
Contact
Blocks
General
Standards and requirements
Mechanical life
Max. operating frequency
Operating force
Operating torque
operations
x 106
S/h
N
Nm
Protection IEC/EN 60529
Environmental resistance
LED
Elements
Push Buttons
Mushroom P/B
momentary
IEC/EN 60947, VDE 0660
5
5
–
3600
3600
–
≤5
≤5
–
≤ 0,8 (screw
≤ 0,8 (screw
–
terminals)
terminals)
IP 20
IP 20
IP 67/IP 69K
humidity, constant, acc. to IEC 60068-2-78
humidity, cyclic, acc. to IEC 60068-2-30
DoublePush Buttons
Rotary Switches
Rotary Switches
illuminated
0,2
3600
≤5
–
0,1
2000
–
≤ 0,3
IP 67/IP 69K
IP 66
Current Paths
Rated impulse withstand voltage Uimp
Rated insulation voltage Ui
Overvoltage category/
Pollution degree
Control circuit reliability at
24 V DC/5 mA
5 V DC/1 mA
Max. fuse size
Switching Capacity
Rated operational current Ie
AC-15
115 V
230 V
400 V
500 V
DC-13
24 V
42 V
60 V
110 V
220 V
Electrical life
AC-15
230 V/0,5 A
230 V/1,0 A
230 V/3,0 A
DC-13
12 V/2,8 A
g
-25/+70
any
> 30
-25/+701
any
> 30
-25/+70
any
> 30
-25/+70
any
> 30
-25/+70
any
> 30
mm2
mm2
0,75-2,5
0,5-2,5
0,75-2,5
0,5-2,5
–
–
–
–
–
–
V
V
6000
500
III/3
6000
500
III/3
–
–
–
–
–
–
–
–
–
-7
7
< 10 , < 1 failure per 10 operations
< 5 x 10-6, < 1 failure per 5 x 106 operations
10
–
–
–
–
A
A
A
A
6
6
4
2
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
A
A
A
A
A
3
1,7
1,2
0,8
0,3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
operations
operations
operations
x 106
x 106
x 106
1,6
1,0
0,7
–
–
–
–
–
–
–
–
–
–
–
–
operations
x 106
1,2
–
–
–
–
UL/CSA/GOST
UL/CSA/GOST
UL/CSA/GOST
UL/CSA/GOST UL/CSA/GOST
min./max.
min.-max.
min.-max.
fault frequency HF
fault frequency HF
characteristic
Approvals
Technical data on request.
1
> 200 V AC/60 Hz: -25/+55 °C
22
°C
A
gG
< back to table of contents >
Ambient temperature
open
Mounting position
Shock withstand acc. to IEC 60068-2-27
Shock period 11 ms, 1/2 sinus wave
Max. permissible wire gage
single core
stranded wire
Technical Data
Rotary
Switches
key operated
General
Standards and requirements
Mechanical life
Max. operating frequency
Operating force
Operating torque
Protection acc. to IEC/EN 60529
operations
x 106
S/h
N
Nm
< back to table of contents >
Pilot Lights
IEC/EN 60947, VDE 0660
> 0,1
100
min./max.
°C
> 0,1
600
≤ 50
IP 67/IP 69K
reset by turning
IP 67/IP 69K
reset by pulling
IP 66/IP 69K
-25/+70
any
> 30
-25/+70
any
> 30
-25/+70
any
> 50
UL/CSA/GOST
UL/CSA/GOST
≤ 0,5
IP 66
g
min.-max.
min.-max.
Current Paths
Rated impulse withstand voltage Uimp
Rated insulation voltage Ui
Overvoltage category/
Pollution degree
-25/+70
any
> 30
-25/+70
any
> 30
mm2
mm2
0,5-1,5
0,5-1,5
V
V
4000
250
III/3
Approvals
Technical data on request.
UL/CSA/GOST
UL/CSA/GOST
Emergency
Stop Push
Buttons
Push Buttons
Push Buttons, illuminated
Mushroom P/B, latched
> 0,1
1800
≤5
IP 67/IP 69K
IP 66
(Potentiometer)
IP 67/IP 69K
(pilot light)
humidity, constant, acc. to IEC 60068-2-78
humidity, cyclic, acc. to IEC 60068-2-30
Environmental resistance
Ambient temperature
open
Mounting position
Shock withstand acc. to IEC 60068-2-27
Shock period 11 ms, 1/2 sinus wave
Max. permissible wire gage
single core
stranded wire
Potentiometer
Solid Pilot
Lights
UL/CSA/GOST
Foot and Palm Switches
latched
General
Standards and requirements
Mechanical life
Max. operating frequency
Operating force
Protection acc. to IEC/EN 60529
Environmental resistance
Ambient temperature
Mounting position
Shock withstand acc. to IEC 60068-2-27
Shock period 11 ms, 1/2 sinus wave
operations
x 106
S/h
N
min./max.
°C
g
IEC/EN 60947, VDE 0660
> 0,1
≤ 600
≤ 60
IP 67, IP 69K
humidity, constant, acc. to IEC 60068-2-78
humidity, cyclic, acc. to IEC 60068-2-30
-25/+40
any
> 15
Cam Switches CG41
General
Standards and requirements
Rated impulse withstand voltage Ue2
2
Rated insulation voltage Uimp
Rated thermal current Iu/Ith
Rated operational current Ie
220 V-240 V
380 V-440 V
Max. fuse size
gG-characteristic
Max. permissible wire gage
single core or stranded wire
flexible wire
Approvals
Technical data on request.
AC-21A
AC-15
AC-15
V
V
A
A
A
A
A
mm2
mm2
IEC/EN 60947, VDE 0660
440
4000
10
10
2,5
1,5
10
2 x 1,5
2 x 1,5
UL/CSA/GOST/CCC 3
1
For further cam switches, refer to Catalog 120. 2Valid for lines with grounded common neutral termination, overvoltage category III, pollution degree 3.
If this approval is required, please request when ordering.
3
23
The Range of “Blue Line” Switchgear
Technical literature covering the following products is available on request.
Catalog
Number
Main Switches and Main Switches with Emergency Function 16 A-315 A
Maintenance Switches 20 A-315 A
Switch Disconnectors 20 A-315 A
500
According to IEC 60947-3, EN 60947-3, VDE 0660 part 107, IEC 60204, EN 60204 and VDE 0113
CL Switches 10 A-20 A
C, CA and CAD Switches 10 A-315 A and L Switches 350 A-2400 A
C, CA and CAD switches are designed for universal application. They are recommended for instrument, isolator,
double-throw and motor control.
L switches are designed for load and off-load applications. They are used to switch resistive or low inductive
loads.
100
Optional Extras and Enclosures
The complete product line, a large number of optional extras is available, including door interlocks, push-pull
devices, cylinder and padlock attachments, control and indicator devices, AC motor drives, as well as
enclosures, both insulated and metal.
101
A and AD Switches 6 A-25 A
A and AD switches have 4 contacts in each switching stage. These switches provide an extensive range of switch
functions and require a minimum mounting depth. Up to 24 switching positions are possible, with availability of
48 contacts per 12 stage switch column.
110
CG, CH and CHR Switches 10 A-25 A
Ultra compact CG, CH and CHR switches are ideally suited for control and instrumentation applications.
Switch terminals are “finger-proof” and conveniently accessible for wiring and are delivered open. All CG4 switches offer specially designed gold plated contacts or H-bridges with “cross-wire” contact systems, which facilitates their use in electronic circuitry and chemically aggressive environments.
120
DH, DHR, DK and DKR Switches 6 A-16 A
DH, DHR, DK and DKR switches incorporate unique corrosion resistant contacts that permit operation on system
voltage as low as 1 V. They have fully enclosed and protected contacts which can be operated either by rotary
and/or lateral handle movement. D switches are used in calibration and semiconductor circuits. They are also
used for relay and contactor control.
X Switches 200 A-630 A
X switches can be applied for load, tap and gang switching duties. They incorporate 6 contacts in each switching
stage. Their compact design provides a minimum length dimension for mounting purposes.
130
140
KG Switches 20 A-315 A and KH and KHR Switches 16 A-80 A
KG, KH and KHR switches are excellent circuit interruptors. They have high through fault and fault making
capacities and are especially designed for use as isolators and safety switches for machine tools, distribution
panels and switchboards. KG ON/OFF switches offer unusually high dimensioned air and creepage distances
between terminals which are designed for time saving “straight-line” wiring. ON/OFF switches are available with
up to 8 poles and double-throw switches are available with up to 4 poles.
Contactors 16 A-115 A and Motor Starters 1,1 kW-55 kW
These include control relays, motor contactors, two and four pole output contactors, heating contactors,
thermal overload relays.
150
200
Push Buttons and Pilot Lights, 22,5 mm Ø
A complete range of state-of-the-art push buttons and pilot lights represent an ideal combination of functional
security and economical efficiency in a modular design.
302
We reserve the right to make technical and dimensional changes without prior notice.
24
SALES AND SERVICE ORGANIZATION
Australia
Kraus & Naimer Pty. Ltd.
379 Liverpool Road, ASHFIELD, N.S.W. 2131
Tel: +61 2 9797-7333, Fax: 0092
salesaus@krausnaimer.com
Greece
KALAMARAKIS-SAPOUNAS S. A.
Ionias & Neromilou Str., P. O. Box 46566
GR-13671 ACHARNES/ATHENS
Tel: +30 2 10 240-6000-6, Fax: 240-6007
kalamarakis.sapounas@ksa.gr
Norway
Kraus & Naimer AS
Hjalmar Brantings vei 8, P. O. Box 21, Økern
N-0508 OSLO
Tel: +47 22 64 44 20, Fax: 65 39 49
ordre.no@krausnaimer.com
Austria
Kraus & Naimer GmbH
Schumanngasse 35
1180 WIEN
Tel: +43 1 404 06-0, Fax: 404 06-190
aso@krausnaimer.com
Hungary
GANZ, Schalter- u. Gerätefabrik
X. Kõbányal út 41/c, Postfach 87
H-1475 BUDAPEST
Tel: +36 1 261-5479, Fax: 4685
ganzkk@ganzkk.hu
Poland
ASTAT sp. z o.o
ul. Dąbrowskiego 461
PL-60451 POZNAŃ
Tel: +48 61 848-8871/72, Fax: 8276
info@astat.com.pl
Belgium, Luxembourg
Kraus & Naimer B.V.
Ikaros Business Park
Ikaroslaan 2
B-1930 ZAVENTHEM
Tel: +32 2 757-0141, Fax: 1640
sales.be@krausnaimer.com
Iceland
BRAEDURNIR ORMSSON EHF
Lágmúli 6-9, P. O. Box 8670
REYKJAVIK
Tel: +354 530-28 00, Fax: 28 10
skuli@ormsson.is
Portugal
ELECTRICOL-DAMAS, FERREIRA & DAMASCENO, LDA.
Apartado 1063, S. Ant. Cavaleiros
P-2670 LOURES
Tel: +351 21 989-8939, Fax: 988-6464
electricol@electricol.pt
Brazil
Central and South America
Kraus & Naimer Ind. Com. Ltda.
Rua Santa Monica, 1061
Parque Industrial San Jose
06715-865 Cotia - SP
Tel: +55 11 2198-1288, Fax: 1251
knbrasil@krausnaimer.com.br
India
BLISS ELECTRICALS Pvt. Ltd.
SA42 A&B, 2nd Flr, Lake City Mall,
Kapurbavdi Junction,
THANE (W) - 400 607
Tel: +91-22-25368609
kane.shriram@blisselectricals.com
Singapore
Kraus & Naimer Pte. Ltd.
Blk 115A, Commonwealth Drive
#03-17/23
SINGAPORE 149 596
Tel: +65 6473-8166, Fax: 8643
sgp@krausnaimer.com
Canada
Kraus & Naimer Ltd.
219 Connie Crescent, Unit 13A
CONCORD, Ontario, L4K 1L4
Tel: +1 905 738-1666, Fax: 9327
salescan@krausnaimer.com
Republic of Ireland
Kraus & Naimer Ltd.
4235 Atlantic Avenue
Westpark Business Campus
Shannon, Co. Clare
Tel: +353 61 704700, Fax: 471084
sales-ie@krausnaimer.com
Slovenia
SCHRACK Technik d.o.o.
Pameče 175
SI-2380 Slovenj Gradec
Tel: +386 2 883 92 00, Fax: +386 2 884 34 71
m.abeln@schrack.si
Cyprus
ELECTROMATIC CONSTRUCTIONS LTD.
72, Evagoras Pallikarides Str., CY-2235 LATSIA-Nicosia
P. O. Box 12630, CY-2251 LATSIA-Nicosia
Tel: +357 2 48 41 41, Fax: 48 57 47
Italy
Kraus & Naimer s.r.l.
Via Terracini, 9
I-24047 TREVIGLIO (BG)
Tel: +39 0363-30 11 12, Fax: 30 21 13
SalesItaly@krausnaimer.com
Republic of South Africa
Kraus & Naimer Pty. Ltd.
7 Village Crescent, Linbro Village
Linbro Business Park, SANDTON 2065
P. O. Box 511, KELVIN 2054
Tel: +27 11 608-6060, Fax: 608-2874
salesZAF@krausnaimer.com
Czech Republic
OBZOR, výrobní družstvo Zlín
Na Slanici 378
CZ-76413 ZLÍN
Tel: +420 57 7195-111/-153 (Techn. Supp.)
Fax: +420 57 7195-152/-138
ots@obzor.cz
Japan
Kraus & Naimer Ltd.
Yoshiwada Building 2F
1-11-6 Hamamatsucho
Minato-Ku, TOKYO 105-0013
Tel: +81 3 3436-6151, Fax: 6325
sales-jpn@krausnaimer.com
Spain
Kraus & Naimer B.V.
Tel: +34 662 696 014
sales.es@krausnaimer.com
Denmark
THIIM A/S
Transformervej 31
DK-2730 HERLEV
Tel: +45 4485 8000, Fax: 8005
thiim@thiim.com
Mexico
JC Ingeniería y Control, SA de CV.
Ángel Gaviño 30.
C. Satélite, C. Medicos,
Naucalpan Edo. de Mexico, C.P. 53100
Tel. (++52 55) 55 62 75 77, Fax. 55 62 04 34
ventas@jcingenieriaycontrol.com
Sweden
Kraus & Naimer AB
Dr. Widerströms Gata 11, FRUÄNGEN
Box 42097, S-126 14 STOCKHOLM
Tel: +46 8 97 00 80, Fax: 97 87 33
order.se@krausnaimer.com
Finland
Kraus & Naimer Oy
Kiitoradankuja 8
FIN-01530 VANTAA
Tel: +358 9 825-424-0, Fax: 424-10
myynti@krausnaimer.com
Middle East - UAE
Branch Office, Kraus & Naimer Pte. Ltd.
SAIF Zone, P. O. Box 121607,
Sharjah, UAE
Tel: +971 6 557 8886
Fax: +971 6 557 8088
uae@krausnaimer.com
Switzerland
AWAG Elektrotechnik AG
Sandbüelstraße 2, Postfach
CH-8604 VOLKETSWIL
Tel: +41 44 908 19 19, Fax: 19 99
info@awag.ch, www.awag.ch
France
Kraus & Naimer s.a.s.
33, rue Bobillot
F-75013 PARIS
Tél: +33 1 58 40 80 80, Fax: 45 80 91 19
ventes@krausnaimer.com
Netherlands
Kraus & Naimer B.V.
Wegtersweg 38-40, Postbus 199
NL-7556 BR HENGELO (Ov.)
Tel: +31 74 291-9441, Fax: 8380
sales.nl@krausnaimer.com
Turkey
KARDEŞ ELEKTRIK SANAYI VE TICARET ANONIM ŞIRKETI
Beşyol, Eski Londra Asfaltı-6
TR-34295 ISTANBUL-Sefaköy
Tel: +90 212 624-9204, Fax: 592-4810
info@unalkardes.com.tr
Germany
Kraus & Naimer GmbH
Wikingerstraße 20-28, D-76189 KARLSRUHE
Postfach 10 01 24, D-76231 KARLSRUHE
Tel: +49 721 59 88-0, Fax: 59 28 28
sales.ger@krausnaimer.com
New Zealand
Kraus & Naimer Ltd.
42 Miramar Avenue, WELLINGTON 6022
P. O. Box 15-009, WELLINGTON 6243
Tel: +64 4 380-9888, Fax: 9877
sales-nz@krausnaimer.com
USA
Kraus & Naimer Inc.
760 New Brunswick Road
SOMERSET, NJ 08873
Tel: +1 732 560-1240, Fax: 8823
salesusa@krausnaimer.com
Great Britain
Kraus & Naimer Ltd.
115 London Road
NEWBURY/BERKSHIRE RG14 2AH
Tel: +44 1635 262626, Fax: 37807
sales-uk@krausnaimer.com
Contact us:
www.krausnaimer.com
Download