Catalog number:
Retrofit Streetlight System
Type:
Notes:
UA/One Piece Decorative Pole Top
MODEL
Spring Steel - 48 LED
FEATURES & SPECIFICATIONS
Retrofit Streetlight 48 LED
Standard Dimensions:
Intended Use
15.33"
(389.38 mm)
Construction
Relume's Universal Area light engines are made of high grade aluminum and powder
coated with high-performance polyester resin for rugged and maintenance-free finish.
Proprietary aluminum composite heat management systems ensures excellent thermal
management and low LED junction temperatures—the key to long LED life.
Electrical
Each power supply (driver) operates over voltages ranging from 120-277 or
480 volts (50/60 Hz). The driver is highly efficient with a power factor of greater
than 0.98 and a total harmonic distortion (THD) of less than 20%. Fluctuations in line
voltage have no effect on luminous output. Drivers have voltage surge protection to
withstand high repetition noise transients. Unit meets radio frequency interference (RFI)
emission limits set forth in FCC Title 47, Subpart B, Section 15.
Quality Assurance
13.41"
(340.61 mm)
8.125"
(206.4 mm)
Installation
Installation usually takes 15 minutes or less and is easily accomplished by one worker.
Connection to a photocell, if required, is straight forward. Relume light engines are
designed to work with most commonly used fitters.
Ordering example: UAG2 S48 D5 CW UL S
FAMILY
TYPE
DISTRIBUTION
COLOR TEMP
VOLTAGE
CONTROLS
UAG2 = Universal
Area
S48 = Spring
Steel - 48
D5 = Type V
CW = Cool White
(5500K)
UL = 120/277
S = Sentinel
UH = 480
SR = Sentinel
Ready
D5C = Type V,
House
Cutoff
NW = Neutral White
(4500 K)
WW = Warm White
(3500 K)
X = None
Warranty
Relume guarantees unsurpassed quality by offering
an industry leading 7 year limited warranty. Contact
Relume for complete warranty language, exceptions,
and limitations.
For more information, visit www.relume.com or call: (248) 969-3800
page 1 of 2
© 2014 Relume Technologies, Inc. • 1795 N. Lapeer Road • Oxford, MI 48371
600.17 / 1-2014
UA FEATURES & SPECIFICATIONS
Relume designs and builds its products to meet or exceed industry-quality standards
and references including American National Standards Institute (ANSI), Federal Trade
Commission (FTC), Illuminating Engineering Society of North America (IESNA or IES),
Underwriters Laboratories (UL), Edison Testing Labs (ETL), DesignLights Consortium
(DLC) and International Dark Sky (IDA). In production, each light fixture is certified by
Relume’s internal QA process. A quality control tracking label, including date of
manufacture, is mounted on the inside of each fixture for full ISO 9001:2008
compliance. Relume guarantees unsurpassed quality by offering an industry leading
7 year limited warranty.
Relume Retrofit Streetlight System
Ideal for lighting main streets, municipalities and parking lots.
Retrofit Streetlight System
UA/One Piece Decorative Pole Top
0.1
02
0.
4
0.05
01
0.
2
5
0.0
0
1
2
3
4
5
6
7
House side
2
2
1
0.01
0
1
0.5
2
Street side
1
-1
2
0.2
3
0.1
4
0.05
01
0.
02
5
Longitudinal Distance in Units of 14.0 Foot Mounting Heights
0.5
0.0
3
05
0.05
0.01
Street side
0.02
0.1
0.05
0.2
-2
0.2
House side
0.2
0.5
2
0.
0.02
1
1
0.1
0.2
66
1.5G
-40°C - 45°C
76.1
102.7Lm/W
0.01
1
0
System Watts:
55.7W -3
2
0.5
-1
Initial Delivered
Lumens: 5949
0.0
2
-2
IP:
Vibe:
Temperature Range:
CRI:
Efficacy:
LTL Report 36602
PENDING
1
0.0
0 .0
0.2
0.1
5
Transverse Distance in Units of 14.0 Foot Mounting Heights
System Watts:
55.1W -3
w/o globe
66
1.5G
-40°C - 45°C
76.1
90.4Lm/W
1
Initial Delivered
Lumens: 4980
0.0
Relume Retrofit Streetlight System
IP:
Vibe:
Temperature Range:
CRI:
Efficacy:
LTL Report 36892
PENDING
0.1
Spring Steel-48
0.5
w/globe
Transverse Distance in Units of 14.0 Foot Mounting Heights
PHOTOMETRY
0.
0
1
2
3
4
5
6
7
Longitudinal Distance in Units of 140.0 Foot Mounting Heights
All photometric testing ae preliminary manufacturer findings.
UA FEATURES & SPECIFICATIONS
INSTALLATION GUIDES
A
Remove & retain for re-use
- Globe
Remove & discard old bulb
- Discard & reduce to raw materials
- Recycle whenever possible
Remove & discard obsolete and
unnecessary equipment
- Bulb fixture & mount
- Ballast
- Supporting Hardware for same
- Discard & reduce to raw materials
- Recycle whenever possible
B
Note: Tools required for pole preparation
must be determined by end user/installer
Tools required for UA1 installation:
- Wire cutters
- UA1 deploy tool #BKT-104
- Wire nut crimp tool
Power supply &
mounting bracket
C
Rubber stops
& mounting tabs
Existing fitter
Leave retainer ring in the
up position until after
insertion into the globe
- Pulling the retainer ring
down deploys the light engines
For more information, visit www.relume.com or call: (248) 969-3800
© 2014 Relume Technologies, Inc. • 1795 N. Lapeer Road • Oxford, MI 48371
LED lights
Caution Do not damage via:
- Crushing or
impacting
- Impacting against
globe opening
during insertion
- Mishandling
page 2 of 2
600.7 / 1-2014