CLCI-1SW2EX-W
International Wireless In-ceiling Switch
The CLCI-1SW2EX-W switch is designed to work as part of a complete
Crestron lighting solution, communicating via the infiNET EX™ wireless
mesh network. This switch provides the ability to control two
lighting fixtures independently. The compact unit is easily hidden in
the ceiling by mounting next to or on the lighting fixture.
Two Channel Switching
The CLCI-1SW2EX-W supports incandescent, tungsten-halogen, magnetic
low voltage, electronic low voltage, and dimmable CFL loads. There are
terminals for wiring in two fixtures, with each independently
controllable by the Crestron system. Each channel can support a load
of up to 500 VA. The unit has terminals for wiring a line-voltage
momentary switch for local on/off and dimming control.
infiNET EX™ Communications
Built on steadfast infiNET™ technology, infiNET EX is the new standard
in 2-way wireless connectivity. So robust, infiNET EX can handle
installations in even the most urban settings. The redundant nature of
its mesh networking technology means that a command will never be
missed, resulting in faultless operation - something that is of the
utmost importance when it comes to lighting control and home
automation. The CLCI-1SW2EX-W harnesses this cutting edge wireless
connectivity which affords it a level of robustness and dependability
above other solutions.
Connectors
> Power out for daisy-chaining units
Power in: (3) screw terminals for AC input from breaker
L: Line power
N: Neutral
G: Ground
Power out: (3) screw terminals for AC to next device
L: Line power
N: Neutral
G: Ground
To switch: (2) screw terminals for 220-240 VAC momentary switch
L: Line power to switch
R: Switch return
Output terminals: (4) screw terminals for switchable loads
N1: Neutral, channel 1
SL1: Switched line power, channel 1
N2: Neutral, channel 2
SL2: Â Switched line power, channel 2
> 220-240 VAC operation
Controls & Indicators
SPECIFICATIONS
Setup: Miniature pushbutton for joining an infiNET EX network
Chan. 1: Green LED indicating power on
Chan. 2: Green LED indicating power off
> Compact switching unit
> Two independently controlled channels
> Maximum 500 VA load per channel
> Reliable infiNET EX communication
> Terminals for momentary switch control
Load Ratings
Number of Channels: 2
Maximum Load per Channel: 500 VA
Load Types: Incandescent, tungsten-halogen, magnetic low voltage, electronic
low voltage, fluorescent ballast, neon/cold cathode, motor
Input Voltage
220 to 240 Volts AC, 50/60Hz Line Power
Wireless
RF Transceiver: 2-way, 2.4 GHz ISM channels 11-26 (2400 to 2483.6 MHz), IEEE
802.15.4 compliant
Range: 150-250 ft, subject to site specific conditions
Gateway: Requires a CEN-RFGW-EX RF gateway
www.crestron.com
800.237.2041
Enclosure
Plastic; suitable for use in space used for environmental air handling
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Dimensions
Width: 2.13 in (54 mm)
Length: 7 in (178 mm)
Height: 1.63 in (41 cm)
CLCI-1SW2EX-W International Wireless In-ceiling Switch
Available Models
CLCI-1SW2EX-W: International Wireless In-Ceiling Switch [Available
December, 2010]
Crestron Electronics, Inc. 15 Volvo Drive | Rockleigh, NJ 07647
Tel: 800.237.2041 / 201.767.3400 | Fax: 201.767.1905
www.crestron.com
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
Specifications subject to change without notice. 11/18/2010