A Complete Family of Reliable
Lubrication Equipment
Real Solutions for Real People
Field-Proven Performance Designed to Save You Money
Petroleum Management Group Products
Graco Pumps
Fast-Ball
®
• Ideal for lower volume, short-run
transfers
• Handles up to 5 gpm (19 lpm)*
• Ratio for oil: 1:1
LD Pump
• Ideal for low- to medium-volume
applications
• Built-in thermal relief to
protect product
• Handles up to 7.8 gpm (30 lpm)*
• Ratio for oil: 3:1, 5:1
• Ratio for grease: 50:1
Mini Fire-Ball 225
®
• Ideal for low to medium volume
applications
• In-line design with fewer parts
for minimal pump wear, less
downtime and maintenance
• Handles up to 2 gpm (7.5 lpm)*
• Ratio for oil: 3:1
• Ratio for grease: 50:1
Fire-Ball 300
Fire-Ball 425
®
• Ideal for medium volume,
high-pressure fluid transfer
• High quality, corrosion-resistant
design for longer pump life
• Handles up to 3 gpm (11 lpm)*
• Ratios for oil: 5:1
• Ratios for grease: 15:1, 50:1
®
• Ideal for the most demanding
high-volume applications
• Also available in 55 gal (200 l),
120 lb (55 kg) or 400 lb (180
kg) cover-mounted packages for
lube trucks
• Up to 13 gpm (49 lpm)*
• Ratios for oil: 3:1, 6:1, 10:1
• Ratios for grease: 50:1, 75:1
NXT™ Supply Systems
• Ideal for bulk transfer–moves
fluids fast! 31 gallons of oil or 57
pounds of grease per minute
• Ratios for oil: 3.5:1, 4.5:1, 6:1,
10:1 ,12:1 and 23:1
• Ratios for grease: 14:1, 26:1,
29:1, 55:1, 63:1, 68:1
Husky™
Diaphragm Pumps
• Simple, reliable transfer pumps
ideal for oil, used oil, windshield
wash, anti-freeze and fuel
• Flow rates: 7-275 gpm
(27-1041 lpm)
• Packages designed specifically
for pre-mixed windshield wash
also available
Graco Meters and Dispense Valves
Pro-Shot Control Valve
SDV15 Control Valve
• Rugged design for harsh
environments
• Pressure-assisted trigger for ease
of operation
• Easy top adjustment with
locking nut
• Multiple adapters available
• Working pressure up to 8,000
psi (552 bar)
• Dispenses motor oils, ATF, gear
lube and anti-freeze
• Sturdy cast body designed for use
in tough environments
• Lock-on trigger
• Indoor or outdoor use
• Multiple extensions available
• 1,500 psi (103 bar)
• Handles up to 15 gpm (57 lpm)*
XDV20 Control Valve
• Dispenses motor oils, ATF, gear
lube and anti-freeze
• High flow valve
• Sturdy cast body designed for
use in tough environments
• Twist-lock-on/off trigger
• Indoor or outdoor use
• Multiple extensions available
• 1,500 psi (103 bar)
• Handles up to 20 gpm (76 lpm)*
Mechanical Meter
• Dispenses a variety of petroleum
and synthetic based oils and
anti-freeze
• Manual and pre-set dispense
• Indoor and outdoor use
• 1,500 psi (103 bar)
• Handles up to 8 gpm (30 lpm)*
Graco Hose and Cord Reels
Reel Enclosures
• Enclosures provide protection to
extend the life of hoses and
bearings
• Designed for enclosing the SD
single pedestal reels
• End caps are easily removed for
easy access to reels
• Enclosure mounting channels
available to accommodate one
to six reels
SD Cord and Light Reels
• High-strength steel construction
for professional use
• Handles cord lengths up to
95 ft (29 m)
• Fluorescent or LED light with
optional tool tap receptacle
• Duplex GFCI industrial or single
Industrial receptacle cord reels
• Meets UL355*, CSA22.2 No. 21
and IP44 standards
LD Series
SD Series 10/20
• Designed for small service
garages and repair shops
• Handles hose lengths up to
50 ft (15 m)
• Enclosed for safety and protection;
extends hose life
• Multiple mounting options,
including ceiling/wall, tote, bench
or wall-mount post
• Easy spring tension adjustment
• Full-flow swivel maximizes fluid
flow with minimal pressure drop
• Designed for daily use applications
such as dealerships, fleet services
and maintenance facilities
• Handles hose lengths up to
65 ft (20 m)
• Long-lasting spring provides
constant spring torque through the
entire range of motion
• Multiple mounting options
• Durable steel spool for demanding
applications
• Open swivel ports ensure high fluid
flow with minimal pressure loss
XDM6 and XDM12 Meters
LDM and LDP Meters
• Durable design ideal for oil
dispense in harsh environments
• Screw-tight nozzle for positive
shut off
• Ball bearing swivel for ease of use
• Reset capable for periodic
dispense history information
• Operating Temperature Range:
-40 to 180º F (-40 to 82º C)
• 1,500 psi (103 bar)
• Handles up to 12 gpm (45 lpm)*
• Dispenses motor oils, ATF, gear
lube and anti-freeze
• Manual and pre-set dispense
models
• Automatic nozzle only
• Indoor use
• Multiple extensions available
• 1,000 psi (69 bar)
• Handles up to 5 gpm (19 lpm)*
XD Series 10/20/30
• Designed for robust, heavy-duty
applications
• Handles hose lengths up to
75 ft (23 m)
• Dual pedestal frame provides
increased strength for extremeduty applications
• Long lasting spring is sealed for
protection against the weather
• Durable steel spool rides on
sealed roller bearings to ensure
trouble-free performance
XD Series 40/50
• Designed for robust, heavy-duty
applications
• Handles hose lengths up to
100 ft (30 m)
• Fully ported swivel and shaft for
unrestricted flow
• Heavy-duty ball bearings outlast
sleeved-type bearings
• Easy rewind with minimal hose
guidance
• Overhead mounting kit available
SDM and SDP Meters
• Dispenses motor oils, ATF, gear
lube and anti-freeze
• Manual and pre-set dispense
models
• High flow
• Indoor or outdoor use
• Multiple extensions available
• 1,500 psi (103 bar)
• Handles up to 14 gpm (53 lpm)*
XD Series 60/70/80
Powered Reels
• Designed for robust, heavy-duty
applications with powered rewind
• Handles hose lengths up to
150 ft (46 m)
• Hydraulic, electric, and pneumatic
direct drive options
• Fully ported swivel and shaft for
unrestricted flow
• Industrial-grade paint for high
abrasion and corrosion resistance
Graco Diesel Exhaust Fluid (DEF) Dispensing Solutions
LD Blue Electric Pumps
• Reliable, industrial pump with
self-priming capabilities
• 120V or 12V electric pump
• Maximum flow rate of 9 gpm
(120V) or 9.5 gpm (12V)
• 120V pump includes auto shutoff timer
1
LD Blue Manual Pumps
SD Blue AODD Pumps
• Lightweight, reliable, and costeffective solution for dispensing
DEF from 55 gallon drums
• Quick drum installation and
change out with integrated two
inch bung adapter
• Fast delivery capable of 11 oz.
per stroke
• Adjustable telescoping down tube
• Superior-performing AODD pump
capable of higher output over
longer runs
• Maximum flow rate of 15 gpm
• Rugged construction resists
corrosion for reliable performance
and long life
• Easy-to-service air valve and
ball checks
LD Blue Meter
• Easy to install – use in-line or at
the end of the dispense hose
• Impulse signals – single channel,
or reed switch
• 1.3 - 26.4 gpm flow rate
• 145 psi maximum pressure
• 1” BSPP(m) inlet and outlet
• Includes 1” BSPP(f) coupler
SDI15 In-Line Meter
• Easy to use for DEF solutions (in
addition to motor oils, ATF, and
anti-freeze) – dispenses pints,
quarts, liters, or gallons
• Tracks totals in two modes – reset
for periodic history and non-reset
for meter life
• Durable design for rugged,
indoor use
• 0.1- 14 gpm flow rate
• 1500 psi maximum pressure
LD Blue Automatic
Dispense Nozzles
• Break-Away System for low-cost
repairs if the spout becomes
detached
• Choose with or without builtin meter
• 4 -12 gpm flow rate
• 50 psi maximum pressure
• 3/4” BSPP inlet
SD Blue Dispense Nozzles
• Heavy duty design
• Automatic shut-off valve with
stainless steel nozzle
• 11 gpm flow rate
• 50 psi maximum pressure
• 3/4” BSPP inlet
LD Pump, Reel and Meter
Performance Runs
in the Family
Three Inch Air Motor
Provides more power to create better flow.
State-of-the-Art Design
Each product in the LD family has
innovative features built-in, plus advanced
technologies designed to save you money
and provide reliable performance and long
life at a competitive price.
NXT Air Valve
More Configurations
Engineered for Durability
Choose drum, tote or wall mount
applications with multiple meter, pump and
reel choices.
Industry Leading Warranty
Graco offers one of the best warranties
in the business – 5 years on all our
LD Series family products.*
Designed to reduce icing in continuous use applications
and uses less air than competitive pumps for better
efficiency. Easy to repair or replace without tearing
down internal pump components for less downtime.
Patent-pending cup and plate design eliminates the
need for O-rings that wear out faster for a more
durable, longer-lasting solution.
Modular Air Valve
Air inlet and exhaust locations are easy to configure with
just four bolts for simple, hassle free installations.
* Two years on LD Meter electronics
Pilot Valve
Everything you need right out
of the box
Choose from a variety of dispense
solutions. From the economical drum
package to the high-performance tote
packages, every solution is designed with
the highest quality components for trouble
free operation.
Patent-pending self cleaning design increases reliability in
dirty air environments and minimizes pressure drop with
rapid changeovers for reduced stalling and smoother flow.
Adjustable Bung Adapter Included
Built-in slide adjustment with easy-set hand screws
is easier to fit into more applications.
Built-In Thermal Relief and Inlet Strainer
Built-in thermal relief (oil only) protects your equipment from
thermal expansion without the need to buy and install an
additional kit. Inlet strainer (oil only) is built-in to protect pump
from containments that can damage your pump.
Professional Fluid Transfer Technology
2
DEF Dispensing Systems
Choose from more configurations
to get exactly what you need for
your business.
The complete package–
everything you need to get
up and running fast.
All packages come with quick changeover
inlet kit, air controls, air-operated double
diaphragm pump, supply hose and auto
shut-off nozzle. Simple bolt together
assembly with no special tools.
Tote Mount
Wall Mount
Why Graco?
Value built-in
Choose from a variety of dispense solutions. From the economical drum package to the
high-performance tote packages, every solution is designed with the highest quality
components for trouble free operation. Uses long lasting BSPP seals for fewer leaks and a
clean work environment. Field-proven pump provides years of reliable operation.
Drum Mount
Efficient, money saving operation
Versatile Husky 515 pump delivers up to 15 gpm (57 lpm) works on as little as 20 psi
(1.4 bar) for money saving efficiency and is capable of 50 psi (3.4 bar) to provide high
output over a long run of hose or piping. Powerful design has superior suction and lift for
deep tanks or totes. Choose the best of both in one pump – power plus efficiency.
Clean transfer solution
Quick change inlet kit provides strong seal between drum coupler and insert to prevent
tank to tank contamination–easy to disconnect pump from empty tank leaving behind
contaminated down tube.
Everything you need right out of the box
A cost-effective system designed to serve multiple markets and applications. Choose
from three configurations to fit your needs.
3
Note: In-line meter is optional. Check ordering
information for the package that best fits your needs.
Matrix® Total Fluid Management System™
Ideal for car dealerships, truck dealerships, off-road maintenance shops, including
mining and construction, fleet facilities, fast lubes, service shops and in-plant applications
5 Steps to Choose Your System
tro
l
Ta
3
nk
Le v el M on
Matrix offers three software platforms
using the Matrix meter including
Premier, Professional and Basic.
Include a Transceiver
Sends and receives information from
the meters, Tank Level Monitors and
Pump Air Control to the work station.
Security with the Pump Air Control
Supplies air to the pump only when
Matrix authorizes the dispense.
Performance of the Matrix Meter
The Matrix Meter dispenses fluid and
communicates dispense information
wirelessly to the PC.
The Time-Saving Tank Level Monitor
Ultrasonic signal accurately measures
fluid levels and communicates to used
oil recyclers or bulk fluid suppliers.
i
to r
m p A ir C o
n
Fluid dispense and inventory control
at your fingertips for petroleum,
synthetic oil products and anti-freeze mixtures
Pu
1
2
3
4
5
Select Application Software
n s c eiv er
Tra
5
2
Wo
M eters
4
r k S t a ti o n
1
Tracking dispenses right to the work order
saves time and eliminates lost inventory
4
Pumps for Any Industrial Application
The Ultimate in Centralized
Lubrication Pumps
From your smallest jobs to your largest
machines, Graco pumps are at the heart
of any centralized lubrication system.
Add a wide variety of quality metering
devices, controllers and accessories to
get a complete system for nearly any
performance, input power or mounting
requirement.
With Graco you can be sure every piece
of equipment in your plant gets the right
amount of lubrication where and when it
needs it.
With Graco automatic lubrication systems you get:
• Increased productivity—longer machine life and reduced downtime
• Reduced operating costs—reduced repair labor and component costs
• More efficient lubrication—small, carefully controlled amounts when needed
Graco Automatic Lubrication Systems apply the correct amount of lubrication in the right place at the right time
Manual Lubrication
Automatic Lubrication
Over Lubrication
• Excess heat build-up
• Wasted lubricant
• Unnecessary labor cost
• More component wear
• Higher energy usage
• Increased operating costs
Time
EXAMPLE: Infrequent filling of the bearing results in
periods of over and under lubrication
5
Amount
Under Lubrication
Amount
Optimal Lubrication
Time
EXAMPLE: Maintain optimal lubrication by replenishing only
the lubricant that is used, with small amounts at
frequent intervals
Dyna-Star® Hydraulic Pump
Long-lasting, flexible design saves money
and is easy to use and install
• Achieve full pressure performance by safely tapping low pressure hydraulics
• Pre-packaged modules ready-to-work with both injector and divider valve systems
• Multiple pump and accessory options for use with refinery drum and custom tank
installations
• Self-lubricating for long life and reliable operation
• Ultra-quiet hydraulic motor - no need for add-on mufflers
• High efficiency motor design uses less hydraulic oil
GL-1 and GL-11 Injectors
Trabon Divider Valve Assembly
•Exclusive seal design for up to
30% longer life
•Accurately meters lubrication to each point
•Field adjustable output for most
every application
®
•Add performance indicators to ensure vital
components have been lubricated
Rugged Digital Controller
Full featured performance—time- or
pressure-based control to monitor
reservoir levels and system pressure
Level Indicator
•Positive, at-a-glance indication
of reservoir lubrication level
•Auto shut-down when low level
is reached
Follower Plate
Pressure Switch
Lets the controller know when
optimum system pressure is
reached ensuring complete
lubrication cycle
Field-Proven Graco Fire-Ball
Grease Pump Lower
Double-acting piston design - the industry
standard for long life
For optimal system performance
NLGI #1 grease is recommended
Innovative design forces grease into the
pump for consistent operation
Center-Feed
Vent and Refill Port
Located below follower plate for
trouble-free venting and refilling
®
Detail of back side of module assembly.
Built-In Gauge
Conveniently monitor
hydraulic output pressure
Pressure and Flow Control
Ability to adjust pressure and flow
puts you in control
6
G3™ Electric Pumps
Introducing the G3 electric lubrication pump
With its flexible design, including adjustable pump elements and an ability to work with both injector-based and series progressive
systems, G3 is a rugged, cost-effective pump designed to serve multiple markets and applications. Three control choices also
mean added flexibility for easy lube system set-up, operation and troubleshooting. Extend machinery life, reduce operating costs
and increase productivity with a G3 today!
Two-in-one versatility
• Use with Series Progressive or Injector
based systems or a combination of both
–all from one pump
Series Progressive
Injectors
Powerful pumping performance
• G3 delivers up to 5100 psi (352 bar) for handling NLGI
#2 grease, even in cold temperatures
Two reservoir styles to choose from
• Stirring paddle with wiper arm breaks up air pockets
and helps prevent grease separation
•
Follower plate design allows for operation in any
orientation; includes stirring paddle to help prevent
grease separation
One, two or three pump elements
• G3 comes standard with one pump installed
• Add up to two more pump elements for higher output
on large projects
AC and DC power choices - G3 makes it easy!
IP69K
• Flexibility to connect to DC (12 or 24V) and
AC (90-240V) power sources in both CPC and
DIN-style connectors
Adjustable stroke pump
G3 comes standard with an adjustable output pump. Its straight- forward design makes increasing or
decreasing the pump displacement as simple as adding or removing a Stroke-Adjust Spacer.
• No need to purchase additional fixed output pump element sizes to meet your specific lube requirements
• No need to purchase a separate, high-priced adjustable output pump–with G3, adjustability comes standard!
7
G3™ Electric Pumps
Standard, Pro and Max
Choose the level of control you need for your series progressive or injector based applications.
G3 Standard
G3 Pro
G3 Max
•No internal controller–use with
separate or existing machine
control for a low cost solution
•Built-in controller with selectable
pump on/pump off timer
•Built-in controller with selectable
pump on/pump off timer
•Low level indicator provides low
warning and shut-down alarm
•Low level indicator provides low
warning and shut-down alarm
•Manual run initiates lube cycle
on-demand (remote option
also available)
•Manual run initiates lube cycle
on-demand (remote option
also available)
•Password protection safeguards
settings
•Password protection safeguards
•Capable of sending a low level
signal to your external controller
or PLC
•Pre-lube function can initiate lube
cycle on start-up
2
3
4
5
6
7
8
9
10
Easy-to-read LED display
Clearly identified pump
on/off indication
Monitoring of up to three
independent zones
Programmable machine
count feature
Alarm signal of lube
system shutdown
Warning signal prior to
lube system shutdown
Low level indication
Password protected
access to control
Pre-lube capability
Easy-to-use navigation keys
5
1
6
2
4
•Machine count input–ideally
suited for inconsistently used
equipment
•Fault indication to external alarms
7
•Optional Data Management
System™ (DMS)
8
Tech Specs
3
9
10
•Up to three pressure or cycle
switch inputs to ensure proper
lubrication cycles
•Mix/match cycle and pressure
switches for custom installations
and feedback
Check out the full-featured G3 Max
1
•Pre-lube function can initiate lube
cycle on start-up
Max Pressure............................. 5100 psi (352 bar)
Power....................... 12 VDC, 24 VDC, 90-240 VAC
Operating Temperature. -13 to 158 ºF (-25 to 70 ºC)
Reservoir Size........................ 2, 4, 8, 12, or 16 liter
Adjustable Pump Output Per Element Per Minute.....
0.12 in3, 0.18 in3,, 0.25 in3 (2 cm3, 3 cm3, 4 cm3)
Lube Type.................... Oil or Grease, up to NLGI #2
Certifications/Ratings.......................CE, ETL*, IP69K
*Conforms to UL 73, certified to CSA 22.2 No. 68-09
Instruction Manual...................................... 3A0414
8
Dyna-Star® HP and Dyna-Star® HF Electric
Lubrication Pumps
New innovations, like tube-in-tube vent and fill path,
Advantage Drive™, auto-fill shut off, and adjustable
motor controls give you mobile lubrication capabilities
like never before. Super-efficient design delivers the
right amount of lubrication at the right time–all in a
neat, compact system.
Power Input
Motor Speed Adjustment to match lube
requirements to your environment
Current Control to fine-tune motor amperage
Signal Input from GLC Controller
Status Lights for easy troubleshooting
Versatile and Hassle Free
•24 VDC electric lubrication pump
•Supplies grease to injector-based, series progressive and dual line
metering systems
•High pressure (HP) model is capable of 5,000 psi (344 bar) with a
maximum output of 18 cubic inches (295 cc) per minute
•High flow (HF) model is capable of 3,500 psi (241 bar) with a
maximum output of 25 cubic inches (410 cc) per minute
Top Quality Lubrication for:
Safely Move Pump
Built-in lift ring is rated to 500 lbs (226 kg)
Graco Advantage Drive™
High quality helical hardened steel gears
are lubricated for life and sealed to
keep contaminants out for longer lasting
performance. Field-proven for the last ten
years to be the longest lasting drive in the
industry.
•Mining Operations
•Heavy-duty Construction
•Industrial Applications
•Milling and Crushing
•Well Services
Direct Mount Electric Vent Valve
Adjustable Motor Control
Mounts directly to pump with no special brackets or
hoses for a compact design and less parts to break or
wear out. Deutsch connector is IP69K rated to keep out
moisture. Built-in pressure relief for safety and compact,
efficient installations.
Auto Fill Shut Off
Innovative mechanical
design that physically
actuates a shut off of
the fill pump for clean,
trouble-free refilling. No
electronics necessary,
but proximity switch can
be added for electronic
signal for full reservoir.
Cavitation-free Fill and Vent Path
Provides simple and direct venting and filling to the foot
of the pump. No cavitation due to improper filling and
venting with no external vent hoses or extra internal
pipes. Convert a standard drum to an injector pump
station in minutes.
Strong 12 Gauge Steel Reservoir
Available in 60 lb (27 kg) or 90 lb (41 kg) reservoirs with
alternate fill and vent ports that deliver lube straight to
the bottom of the pump. Common bolt pattern for easy
drop-in replacement without drilling or adapter plates.
Choose Your Level of Control
9
Dip Stick
Low Level
Auto Fill Shut Off
For visual indication
of lube level
Quick visual level indication
with electronic signal
to GLC 2200 or
GLC 4400 controller
Avoid over- or under-filling with this
cost-effective mechanical solution.
Visual indication of a full
reservoir or connect to
proximity switch for
electronic indication.
LubePro™ Series Pumps
Field-Proven Reliability
For nearly 50 years, Graco Fire-Ball™ pumps have been a mainstay in the
lubrication marketplace for durability and long life. Designed for the toughest applications, the Fire-Ball™ repeatedly outperforms and outlasts the
competition. LubePro™ series pumps leverage the same proven quality and
leading technology.
Designed to Perform
LubePro™ series pumps offer a robust solution where high output and fast
lubrication cycles and flow rates are needed to optimally lubricate equipment while it’s working. Our robust design has been tested to outperform
the competition.
Positive Impact to Your Bottom Line
LubePro™ is the choice of lubrication professionals, because it positively
impacts your company’s bottom line by automatically providing the optimal
amount of lubrication at the right time.
•Extends equipment life
•Improves productivity
•Reduces downtime
LubePro™
Horizontal
Pumps
•Reduces repair costs
•Reduces operating costs
•Improves employee safety
Two reservoir types
2 liter reservoir available in grease or oil.
Select from the 19:1 oil pump or the 26:1
grease pump.
Low level detection option
Reliable, Graco factory-installed low level
indicator that is easy to connect using a
simple DIN connection
High-strength, shatter-resistant reservoir
Utilizes a high-quality, polycarbonate reservoir that is securely
mounted to the pump with rigid tie rods for optimal sealing
Fast cycle rate and flow
Cycles and vents lubricant injectors
in as little as 10 seconds. 2.2 in3 of
grease per stroke and 3.0 in3 of oil
per stroke.
Easy to install
Utilize existing mounting holes for easy
replacement and installation
Fire-Ball™ pump casting
Self-venting pump
Leverages the proven quality and
long life of Graco’s Fire-Ball™ pump.
Eliminates tie rods and end cap.
Integrated vent automatically and
reliably relieves pressure on return
stroke, no pressure switch or wiring
required
No priming required
No need to bleed the valve to prime
the pump, no priming
is required
Pneumatic Power
Easily installed into existing air line
Vertical Pumps are also available
10
Series Progressive Divider Valves
Trabon USP–Uniblock Series Progressive
®
Trabon USP is an economical option to solving your lubrication system needs. It serves as a high quality
entry point to move away from manual lubrication, and is smaller than competitive mono blocks to save
valuable machine space.
Features
•Series progressive metering in a one piece block–no assembly required!
•Space efficient design with 6, 8, 10, 12, 14, or 16 outlets. Outlets can be combined to meet larger
bearing needs
•Requires no special fittings, all fittings come with the valve block
•Built-in outlet check valves ensure accurate lube delivery, every time
•Works with standard MSP magnetic and electronic proximity switch cycle indicators to provide
positive assurance of a successful lube event
Typical Application
Mobile, industrial, food & beverage, wind, and many more
Trabon MD Series
®
The Trabon MD Series is the most compact series progressive
solution making it a perfect fit for tight spaced applications.
Features
•Available with 2, 3, 4, or 6 outlets
•Easy to install on new or existing equipment
•Use our cycle indicator pin models to provide positive
assurance of a successful lube event
Typical Application
Industrial or mobile applications where space is at a premium
Trabon MJ Series
®
The Trabon MJ series features a compact and easily customizable design that can be tailor fit to meet a
variety of specific lube requirements. Capable of handling grease grades up to NLGI #1.
Features
•Space efficient–from 6 to 16 points from one block assembly
•Built-in outlet check valves ensure accurate lube delivery, every time
•Alternate outlet on face of valves can be fitted with optional performance indicators, taking the
guesswork out of troubleshooting
•Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to
provide positive assurance of a successful lube event
Typical Application
Machine tools, textile, glass & can machinery, & mobile equipment
Trabon MSP Series
®
The Trabon MSP Series sets the industry standard for quality, reliability, and ease of use features. It was
the original modular-style series progressive divider valve – and is still the best!
Features
•Quick change valve sections can be removed from the base assembly without disturbing any lube
lines – minimizing labor cost and maximizing your machine uptime
•Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to
provide positive assurance of a successful lube event
•Alternate outlet on face of valves can be fitted with optional performance indicators, taking the
guesswork out of troubleshooting
•Built-in outlet check valves ensure accurate lube delivery, every time
Typical Application
Mobile, industrial, food & beverage, wind, and many more
11
Pre-Assembled
and Tested
Base Plates
Now Available!
Series Progressive Divider Valves
Manzel MHH Series
®
Pre-Assembled
and Tested
Base Plates
Now Available!
Same capable design as the Trabon MSP Series, with even tighter and more exacting tolerances. The
Manzel MHH Series delivers highly accurate lube delivery for demanding high pressure oil applications.
Features
•Quick change valve sections can be removed from the base assembly without disturbing any
lube lines – minimizing labor cost and maximizing your machine uptime
•Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to
provide positive assurance of a successful lube event
•Alternate outlet on face of valves can be fitted with optional performance indicators, taking the
guesswork out of troubleshooting
•Built-in outlet check valves ensure accurate lube delivery, every time
Typical Application
Trabon MX Series
®
Compressors, industrial equipment, textile and mobile equipment
Greater output volumes for heavy service requirements make the Trabon MX Series ideal
for steel and paper mill systems with it’s economical and compact design.
Features
•Durable design withstands harsh environments and operating conditions
•Built-in outlet check valves ensure accurate lube delivery, every time
•Can be easily accessorized with magnetic and electronic proximity switch cycle
indicators to provide positive assurance of a successful lube event
•Alternate outlet on face of valves can be fitted with optional performance
indicators, taking the guesswork out of troubleshooting
Typical Application
Pulp and paper, steel mills, heavy and high volume industrial applications
Trabon MXP Series
®
The Trabon MXP Series’ greater output volume makes it easy to customize your assembly to meet larger
machine requirements.
Features
•Quick change valve sections can be removed from the base assembly without disturbing any lube
lines – minimizing labor cost and maximizing your machine uptime
•Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to
provide positive assurance of a successful lube event
•Alternate outlet on face of valves can be fitted with optional performance indicators, taking the
guesswork out of troubleshooting
•Built-in outlet check valves ensure accurate lube delivery, every time
Typical Application
Pulp and paper, steel mills, heavy and high volume industrial applications
Trabon MGO Series
®
The Trabon MGO Series offers the largest output available in a series progressive system. Ideal for heavyduty
and large bearing applications with wide temperature variations and high volume requirements.
Features
•Can be easily accessorized with magnetic and electronic proximity switch cycle indicators to
provide positive assurance of a successful lube event
•Alternate outlet on face of valves can be fitted with optional performance indicators, taking the
guesswork out of troubleshooting
•Robust design is virtually indestructible and built to perform in extreme environments
Typical Application
Pulp and paper, steel mills, heavy and high volume industrial applications
12
GL-1 Injector
Precision-honed Components
for Reliable Operation in the
Harshest Environments
Graco’s captured seal design is
the best in the business!
• Test results show the difference – GL-1 injectors
showed no seal leakage at 215,000 cycles
• Seals last 5 times longer than the competition’s!
• Combine with GL-11s and GL-32s in the same Single
Line Parallel System for a full range of outputs
Technical Specifications
Maximum operating pressure
3500 psi (241 bar)
Minimum operating pressure
1850 psi (128 bar)
Suggested operating pressure
2500 psi (172 bar)
Reset pressure
600 psi (4.1 bar)
Output volume per cycle
0.008–0.08 in3 (0.13–1.13 c3)
Recommended fluids
Uses NLGI #2 grease down to 32˚ F (0 ºC)
Instruction manual
308953
Design Guide
309
Zerk Fitting Outlet
1/8 in npt
Supply Line Outlet
1/4 in npt
Inlet
3/8 in npt
To adjust:
1. Loosen the lock nut
2. R
otate 5/8 inch output adjustment nut
clockwise to decrease grease output–
decrease the travel of the piston
3. Rotate 5/8 inch output adjustment nut
counter-clockwise to increase grease
output–increase the travel piston
Adjustment Screw
Visual Indicator Pins
Lock Nut
Supply Line Outlet
Zerk Fitting with Cap
Mounting Holes
Same as the competion for
an easy retrofit
13
GL-32,33,42,43 Grease Injectors
Precision-honed Components
for Reliable Operation in the
Harshest Environments
Accurate, reliable and
adjustable lubrication for
every lube point on your
machine
• Longer lasting seal design for troublefree performance
GL-32
GL-43
GL-33
GL-42
Maximum operating pressure
3500 psi
(241 bar)
1000 psi
(69 bar)
3500 psi
(241 bar)
1000 psi
(69 bar)
Minimum operating pressure
1200 psi
(83 bar)
750 psi
(52 bar)
1200 psi
(83 bar)
750 psi
(52 bar)
Typical operating pressure
1500 psi
(103 bar)
850 psi
(59 bar)
1500 psi
(103 bar)
850 psi
(59 bar)
Reset pressure
200 psi
(13.7 bar)
150 psi
(10 bar)
200 psi
(13.7 bar)
150 psi
(10 bar)
• Easy to design, setup and operate
• Flexible–add or subtract lube points
without redesigning your system
• High performance–handles up to NLGI
#2 grease
Output volume per cycle
0.001 - 0.008 in3 (0.02 - 0.13 cm3) 0.001 - 0.003 in3 (0.02 - 0.05 cm3)
Maximum temperature rating
Recommended fluids
350˚ F (176˚ C)
Grease up to
NLGI #2
SAE 10 weight
oil minimum
Grease up to
NLGI #2
SAE 10 weight
oil minimum
Adjustable to fit any machine
One Piece Cast Injector
One piece design for added
durability
Output Adjustment Nut
Adjustable output volume from
0.001–0.008 in3 (0.02–0.13 cm3)
makes it easy to customize each
individual lube point
Visual Indicator Pin
Convenient front-mounted cycle
pin indicator confirms that the
injector is functioning properly
14
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle
lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco offers
systems, products and technology that set the quality standard in a wide range of fluid handling solutions.
Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and
dispensing sealants and adhesives, along with power application equipment for the contractor industry.
Graco’s ongoing investment in fluid management and control will continue to provide innovative solutions
to a diverse global market.
Anoka, MN, US
SALES/
DISTRIBUTION/
SERVICE
Shanghai, China
Suzhou, China
Contact us today!
For more details Email us: info_APLube@graco.com
or visit: www.graco.com/lubrication
©2015 Graco Inc. 352400 Rev. A 06/2015 Printed in China. All written and visual data contained in this document are based on the latest product information
available at the time of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for
identification purposes and are trademarks of their respective owners.