Issue 1 August 09
NEWS link
Showcasing the latest products for electrical installations and information networks
Smooth
as suede
Available in rich, earthy tones and bright
accent colours, Linea’s new Soft-Touch
range of cover plates have a beautiful
suede-feel finish.
Fingerprint resistant and easily changeable, the
Linea Soft-Touch range of cover plates will liven
any space and can be changed seasonally to
reflect colour trends.
The muted earthy tones complement neutral
interiors perfectly, while the bombastic rainbow
hues will add personality to children’s rooms,
cheerful kitchens and design focussed spaces in
either residential or commercial buildings.
Earth tones include: Ghost Gum (LG), 5 O‘clock
Olive (OL), Ninja Khaki (KH), Wet Elephant
(OG), Abracadabra (AU), Midnight Dash (MI)
and Runaway Bride (VA). The rainbow selection
includes: Sunshine (YE), Bubblegum (PI), Cheeky
Boy Blue (BU), Saucy Red (RE) and Orange
Crush (OR).
This unique suede-feel range is a creative
addition to the Linea metallic range. Cover
plates are available for all products. To order
cover plates simply add the colour code to the
end of the Cat number. For Cat numbers please
refer to the HPM catalogue.
Codes listed are for the cover plates only. Grids are ordered
separately e.g. LN777AWE (white GPO), LN777ABL (black GPO)
LN777APLBU
LN777APLYE
LN777APLRE
LINEA
LI N E A
In addition to the new Linea Soft-Touch cover plates
outlined on page 1, HPM has also released
3 metallic cover plates for a luxurious finish.
The entire sleek, low profile Linea range of wall
plates fits standard mounting brackets for easier
installation and retrofitting.
■ Available colours: gloss white, cream and black
■ Additional cover plates available in a variety of
metallic, earth and bright colours
■ Available with extra mechanism up to
35A - LN777X
Metallic finish cover plates
Matt Silver (MS)
Standard mounting
Base colours:
Asphalt (AS)
White (WE)
Cream (CR)
Black (BL)
low 4mm profile
for sleek finish
Gun Metal (GL)
LN777WE
AQ U A SCAN
Weatherproof
movement sensor
Aquascan is ideal for mounting on walls and eaves
around the perimeters of buildings to automatically
activate lighting when movement is detected.
There are clear safety and security benefits and
Aquascan can help reduce energy consumption by
minimising the use of lighting.
■ IP66 rated
■ T
ime adjustable from 15 seconds to 7 minutes
■ S
ensitivity adjustable
up to 18m
■ 180˚ head swivel
■ 2
& 3 wire versions
available
■ F
its standard
mounting blocks
DI M M E R S
700+W leading edge and
trailing edge dimmers
Perfect for larger loads. HPM have released new 700VA
and 1000VA leading and trailing edge dimmers. Part of
the new series of HPM dimmers, they are flicker free
and include extra features such as soft start and over
temperature protection.
■
Quiet operation
■
Flicker and noise free
■
00L - suitable for dimming
7
with wire wound transformers
700T - suitable for dimming with
electronic transformers
■
oft start - lamp turns on
S
gradually to increase lamp life
■
ver temperature protection
O
- lamp automatically dims if
dimmer is overloaded
Compatible with HPM switch
plates - Standard, Excel , Linea
■
630/9-2W (2 wire)
630/9-3W (3 wire)
LN777XWE
* For product codes, please call Customer
Service and request a product info flyer.
D O UBLE PLU GGING
See clearly with new
HPM double clear plugbases
Improving visibility for faster fault checking,
HPM has released a clear polycarbonate double
plugbase. With a quick release base, plenty of wiring
room, accessible and backed-off terminal screws,
including loop terminal, they are lightning fast to
install. The new clear double plugbases are available
in 10 and 15A models. The 10A model is also
available in black. Cat. No.s are as follows:
T5 CIRCULAR
FLUORESCENT LAMP
Suitable for all HPM MRT5YA range of
luminaires
■
■
■
■
■
■
■
37/2CL
10A clear double plugbase
■
37/2BL
10A black double plugbase
■
37/215CL
15A clear double plugbase
ated at 15,000 hours average lamp life
R
U.V. filter
Environmental series - reduced mercury
4000K colour temperature
Cool white colour for general applications
Must be used with approved T5 Electronic HF
Ballast
M5R22C (22W)
M5R32C (32W)
M5R42C (42W)
ELECTRES A F E
Power centre - 10A & 15A
HPM’s new 15A power centre is ideal for use on
construction sites in both Australia and New Zealand
for equipment such as welders, jackhammers, and
other tools requiring 15A. In addition to releasing
the new 15A power centre, the 10A version has been
upgraded with new European made MCBs and RCDs
for even better protection.
■ Voltage independent electromechanical RCD
provides protection even if the neutral supply
is lost
■ C
ompatible with automatic portable appliance
testers
■ Type A RCD
■ C
ompliant to AS/NZS301Z construction site
requirements
■ 2 year warranty
REPC410 (10A)
REPC415 (15A)
LED EXI T SIG NS
E M E R G E N CY
LI G H TI N G
Go ‘green’ with LED
Save up to 70% on energy consumption with
Legrand’s weatherproof LED exit signs.
■
■
■
■
■
Two sizes: 24m and 32m viewing distances
Long life LED source - up to 50,000 hours
IP65 rated
Stand alone or Axiom versions
Two rate charge
32m
■
■
■
■
■
■
■
■
■
■
■
■
Maintained/Non-maintained operation
(configurable on the same fitting)
Diffusers supplied with 3xRM diffuser sheets
T8 - 10W fluorescent technology
Easy to install
Plug-in connector from gear tray to unit base
Ceiling or wall mount diffuser options
All-in-one box options
AS2293 compliant
Suitable for all emergency lighting applications
ER110C
684459 - 1x10W
Ceiling mount
erform maintenance tests for emergency
P
lighting installations
All-in-one design, no discrete components
Ready for use 4mm2 Ø input terminal blocks
enable loop-in/loop-out of 2.5mm2 cables
Compact in size - only 4 DIN rail spaces (682084)
Suitable for switchboard builders (682084)
Conforms to AS2293.1-2005
682083
Economical emergency exit
sign range based on 10W fluorescent
technology
■
■
24m
ER EXI T S IG N S
■
Discharge test switches
ER110W
684457 - 1x10W
Wall mount
682084
Energy efficient
LED Edgelight Exit Signs
Reduce energy consumption and on-going
maintenance costs with the Legrand LED Edgelight.
Features include:
Long life LED light source
Maintained/Non-Maintained operation (configurable on the smae fitting)
■ Robust design
■ Easy to install
■ Surface mount option available
■ LED gear tray option available to upgrade old 10W
fluorescent fittings
■ AS2293 compliant
■
■
6844 20 + 2240 36
AV MOD U L E S
Modularity increases flexibility
4269RW
4269RGB
4269RWY
4269VGA
Providing maximum flexibility and convenience, BTicino now offers
AV modules that can be purchased separately. This means installers
can create their own combinations of AV plates.
The new modules are ideal for commercial and residential
applications and include:
■
Composite video and audio
■
RGB
■
RGA
■
USB
■
Stereo audio
■
HDMI
■
Headphone jack
* To order, place the code for the BTicino range name, e.g. Living (L), Light (N),
Light Tech (NT) at the beginning of the codes listed above.
IMPROVIN G U SAB IL IT Y
16 channel IR remote control upgrade
Featuring a completely new design, BTicino has upgraded
its ‘My Home’ 16 channel IR remote control for improved
usability, replacing products 4482/7 and 4482/16.
This remote control can directly control a mix of 16 channel
commands including: lighting controls, scenarios, blind
controls, dimmers, general on/offs, sound system on/off
and volume control, sound system source and track
selection and door strikes. Features include:
■
Blue LED and an audio signal that activates when a
button is pressed
■
3.5mm jack for hearing aids
■
Windows for the insertion of symbols representing the
function stored in each pushbutton
■
Threaded hole on the reverse side for easy mounting
■
Power supply: 2 batteries 1.5V type AAA
4269HDMI
4269HJ
4269USB
Di d yo u k now ?
Combining Legrand’s LED emergency
lighting and Axiom system will
significantly reduce your expenditure
on labour and electricity, as well as
simplifying your reporting.
In the current economic climate everyone is trying to
save costs and reduce required labour as much as
possible in order to remain competitive. Axiom provides
a revolutionary wireless solution for monitoring
emergency lighting.
Here’s a few fast facts:
■
Monitors status of SPUs from one
central location
■
Easily retrofittable - no additional
cabling is required when upgrading
aging emergency lighting signs
■
Removes the pain of producing required
documentation with simple, on-demand
computer reports
■
Used in conjunction with Legrand’s
LED range of emergency lighting, the system
uses significantly less energy compared with
traditional fluorescent technology
■
Suits single and multi-location premises
HPM: 1300 369 777
www.hpm.com.au
Legrand: 1300 534 726
www.legrand.com.au
BTicino: 1300 284 246
www.bticino.com.au
Cablofil: 1300 534 726
www.cablofil.com.au