steel research international vol. 79 (2008)
Index of Authors
A
Acker, W.; Denkena, B.: Dimensional Measurement by
Projection of Locally Adapted Patterns .
79 (2008) No. 3, 208-212.
DOI: 10.2374/SRI07SP125-79-2008-208-212
Agudo, L.; Jank, N.; Wagner, J.; Weber, S.; Schmaranzer, C.;
Arenholz, E.; Bruckner, J.; Hackl, H.; Pyzalla, A.R.:
Investigation of Microstructure and Mechanical
Properties of Steel-Aluminium Joints Produced by
Metal Arc Joining. 79 (2008) No. 7, 530-535. DOI:
10.2374/SRI08SP022-79-2008-530
Andersson, M.; Björkvall, J.; Nzotta, M.; Jönsson, P.: The
Effect of Ladle Treatment on Inclusion Composition
in Tool Steel Production.
79 (2008) No. 4, 261-270. DOI:
10.2374/SRI07SP075-79-2008-261
Apel, M.; Böttger, B.; Eiken, J.; Schaffnit, P.; Steinbach, I.:
Phase-Field Simulation of Solidification and SolidState Transformations in Multicomponent Steels.
79 (2008) No. 8, 608-616. DOI:
10.2374/SRI08SP021-79-2008-608
Arenholz, E.; Agudo, L.; Jank, N.; Wagner, J.; Weber, S. ;
Schmaranzer, C.; Bruckner, J.; Hackl, H.; Pyzalla,
A.R.: Investigation of Microstructure and
Mechanical Properties of Steel-Aluminium Joints
Produced by Metal Arc Joining. 79 (2008) No. 7,
530-535. DOI: 10.2374/SRI08SP022-79-2008-530
Arlt, N.; Hochstrasser-Kurz, S.; Gümpel, P.: Sensitization
Behaviour of Manganese-Alloyed Austenitic Stainless Steels. 79 (2008) No. 6, 445-448. DOI:
10.2374/SRI08SP055-79-2008-445
B
Bach, F.-W.; Plorin, T.; Bormann, D.: The Manufacture and
Characterisation of Reinforced Magnesium Foams.
79
(2008)
No.
3,
185-190.
DOI:
10.2374/SRI07SP120-79-2008-185-190
Bach, F.-W; Reimche, W.; Mroz, G.; Duhm, R.; Bernard, M.;
Diebel, M.: High Strength 3D Non-Vacuum
Electron Beam Weld Joints - Setting of Gradient
Material Properties and Testing of Weld Quality.
79
(2008)
No.
3,
225-231.
DOI:
10.2374/SRI07SP128-79-2008-225-232
Bach, F.-W.; Cwiekala, T.; Brosius, A.; Tekkaya, A.E.;
Grydin, O.; Schaper, M.; Barthel, C.; Svendsen, B.:
Efficient Modelling and Simulation of Process
Chains in Sheet Metal Forming and Processing.
79
(2008)
No.
10,
731-737.
DOI:
10.2374/SRI08SP058
Barbe, L.; Bouquerel, J.; Verbeken, K.; Krizan, D.; Verleysen,
P.; Houbaert, Y.: Evaluation of the Static StressStrain Behaviour of Phosphorus Alloyed and
Titanium Micro-alloyed TRIP Steels. 79 (2008) No.
10, 784-792. DOI: 10.2374/SRI08SP019
Barna, M.; Javurek, M.; Gittler, P.; Rockenschraub, K.;
Lechner, M.: Flow Modelling in Continuous Casting
of Round Bloom Strands with Electromagnetic
Stirring. 79 (2008) No. 8, 617-626. DOI:
10.2374/SRI08SP027-79-2008-617
Barthel, C.; Cwiekala, T.; Brosius, A.; Tekkaya, A.E.; Grydin,
O.; Schaper, M.; Bach, F.-W.Svendsen, B.: Efficient
Modelling and Simulation of Process Chains in
Sheet Metal Forming and Processing. 79 (2008) No.
10, 731-737. DOI: 10.2374/SRI08SP058
Becker, H.; Maikranz-Valentin, M.; Weidig, U.; Schoof, U.;
Steinhoff, K.: Components with Optimised
Properties due to Advanced Thermo-mechanical
Process Strategies in Hot Sheet Metal Forming.
79 (2008) No. 2, 92-97. DOI:
10.2374/SRI07SP115-79-2008-92-97
Behrens, B.-A.; Hübner, S.; Knigge, J.; Voges-Schwieger, K.;
Weilandt, K.: Local Strain-Hardening in Sheet Metal
and Forging Components. 79 (2008) No. 3, 165-172.
DOI: 10.2374/SRI07SP117-79-2008-165-172
Behrens, B.-A.; Hagen, T.; Mielke, J.; Sidhu, K. B.:
Production of Structure Components with Selective
Properties by means of Action Media based Cold
Forming. 79 (2008) No. 3, 233-239. DOI:
10.2374/SRI07SP122-79-2008-233-239
Berger, K.; Weiß, Ch.; Kepplinger, W.L.: CFD Simulation of
the Carbon Dust Combustion in the COREX®
Melter Gasifier, 79 (2008) No. 8, 579-585. DOI:
10.2374/SRI08SP023-79-2008-579
Bergström, J.; Medvedeva, A.; Gunnarsson, S.: Inclusions,
Stess Concentrations and Surface Condition in
Bending Fatigue of H13 Tool Steel. 79 (2008) No. 5,
376-381. DOI: 10.2374/SRI07SP083-79-2008-376
Bernard, M.; Reimche, W.; Bach, F.-W.; Mroz, G.; Duhm, R.;
Diebel, M.: High Strength 3D Non-Vacuum
Electron Beam Weld Joints - Setting of Gradient
Material Properties and Testing of Weld Quality.
79 (2008) No. 3, 225-231. DOI:
10.2374/SRI07SP128-79-2008-225-232
Berns, H. Gavriljuk, V. G.; Tyshchenko, A.; Bliznuk, V.V.;
Yakovleva, I.L.; Riedner, S.: Cold Work Hardening
of High-Strength Austenitic Steels. 79 (2008) No. 6,
413-422. DOI: 10.2374/SRI08SP051-79-2008-413
Beynon, J.H.; Hinton, J.S.: A Laboratory Steckel Mill
Simulation. 79 (2008) No. 4, 278-286. DOI:
10.2374/SRI07SP060-79-2008-278
Björkvall, J.; Andersson, M.; Nzotta, M.; Jönsson, P.: The
Effect of Ladle Treatment on Inclusion Composition
in Tool Steel Production.
79 (2008) No. 4, 261270. DOI: 10.2374/SRI07SP075-79-2008-261
Blasiak, W.; Wikström, P.; Weihong, Y.: The Influence of
Oxide Scale on Heat Transfer during Reheating of
Steel. 79 (2008) No. 10, 765-775. DOI:
10.2374/SRI08SP009
Breidenstein, B.; Denkena, B.; Boehnke, D.: Development of
New Combined Manufacturing Technologies –
Influence of the Cutting Process on Workpiece
Properties. 79 (2008) No. 3, 196-201, DOI:
10.2374/SRI07SP123-79-2008-196-201
Brethfeld, A.; Simek, D.; Rafaja, D.; Motylenko, M.; Klemm,
V.; Schreiber, G.; Lehmann, G.: XRD Analysis of
Local Strain Fields in Pearlitic Steels – towards the
Fast Examination of Microstructure after Hot
Rolling. 79 (2008) No. 10, 800-808. DOI:
10.2374/SRI08SP057
Brolund, B.; Westin, E.M.; Hertzman, S.: Weldability Aspects
of a Newly Developed Duplex Stainless Steel LDX
2101. 79 (2008) No. 6, 473-481. DOI:
10.2374/SRI08SP046-79-2008-473
Brosius, A.; Cwiekala, T.; Tekkaya, A.E.; Grydin, O.;
Schaper, M.; Bach, F.-W.; Barthel, C.; Svendsen, B.:
Efficient Modelling and Simulation of Process
Chains in Sheet Metal Forming and Processing. 79
(2008) No. 10, 731-737. DOI: 10.2374/SRI08SP058
Brück, A.; Palkowski, H.: Local Use of Ageing Effects in
Multiphase Steels for Designing Local Properties of
Constructional Elements. 79 (2008) No. 3, 172-177.
DOI: 10.2374/SRI07SP118-79-2008-172-177
Bruckner, J.; Agudo, L.; Jank, N.; Wagner, J.; Weber, S.;
Schmaranzer, C.; Arenholz, E.; Hackl, H.; Pyzalla,
A.R.: Investigation of Microstructure and
Mechanical Properties of Steel-Aluminium Joints
Produced by Metal Arc Joining. 79 (2008) No. 7,
530-535. DOI: 10.2374/SRI08SP022-79-2008-530
Bleck, W.; Naderi, M.; Uthaisangsuk, V.; Prahl, U.: A
Numerical and Experimental Investigation into Hot
Stamping of Boron Alloyed Heat Treated Steels.
79 (2008) No. 2, 77-84. DOI:
10.2374/SRI07SP094-79-2008-77-84
Bliznuk, V.V.; Gavriljuk, V. G.; Tyshchenko, A.; Yakovleva,
I.L.; Riedner, S.; Berns, H.: Cold Work Hardening
of High-Strength Austenitic Steels. 79 (2008) No. 6,
413-422. DOI: 10.2374/SRI08SP051-79-2008-413
Boehnke, D.; Denkena, B.; Breidenstein, B.: Development of
New Combined Manufacturing Technologies –
Influence of the Cutting Process on Workpiece
Properties. 79 (2008) No. 3, 196-201. DOI:
10.2374/SRI07SP123-79-2008-196-201
Boom, R. ; Kromhout, J.A.; Melzer, S.; Zinngrebe, E.W.;
Kampermann, A.A.: Mould Powder Requirements
for High-speed Casting. 79 (2008) No. 2, 143-148.
DOI: 10.2374/SRI07SP069-79-2008-143-148
Bormann, D.; Bach, F.-W.; Plorin, T.: The Manufacture and
Characterisation of Reinforced Magnesium Foams.
79 (2008) No. 3, 185-190. DOI:
10.2374/SRI07SP120-79-2008-185-190
Böttger, B.; Apel, M.; Eiken, J.; Schaffnit, P.; Steinbach, I. :
Phase-Field Simulation of Solidification and SolidState Transformations in Multicomponent Steels .
79 (2008) No. 8. DOI:
608-616 10.2374/SRI08SP021-79-2008-608
Bouquerel, J.; Verbeken, K.; Krizan, D.; Barbe, L.; Verleysen,
P.; Houbaert, Y.: Evaluation of the Static StressStrain Behaviour of Phosphorus Alloyed and
Titanium Micro-alloyed TRIP Steels. 79
(2008)
No. 10, 784-792. DOI: 10.2374/SRI08SP019
C
Charles, J.: Duplex Stainless Steels - a Review after DSS ’07
held in Grado. 79 (2008) No. 6, 455-465. DOI:
10.2374/SRI08SP063-79-2008-455
Charles, J.; Mithieux, J.-D.; Kostoj, V.; Chassagne, F.: New
Stainless Steel Solutions as Economic Alternatives to
Classical 1.4301 Austenitic Grades. 79 (2008) No. 6,
449-454. DOI: 10.2374/SRI08SP062-79-2008-449
Chassagne, F.; Mithieux, J.-D.; Kostoj, V.; Charles, J.: New
Stainless Steel Solutions as Economic Alternatives to
Classical 1.4301 Austenitic Grades. 79 (2008) No. 6,
449-454. DOI: 10.2374/SRI08SP062-79-2008-449
Chen, H.; Wu, K.; Xu, W.; He, H.; Zhou, X.; Fei, S.: Ratio
between Unconsumed Coal and Coke Particle in BF
Dust. 79 (2008) No. 12, 899-903. DOI:
10.2374/SRI08SP053
Chen, J.K.: Aging Behaviour in Hot-Rolled Low Carbon
Steels. 79 (2008) No. 9, 708-712. DOI:
10.2374/SRI08SP001-79-2008-708
Chen, W.; Li, J.; Liu, Q.; Wang, X.: Effect of Ultrasonic
Treatment on the Solidification Structure of High
Carbon Steel Containing Rare Earth Elements.
79 (2008) No. 5, 358-363. DOI:
10.2374/SRI07SP086-79-2008-358
Christ, H.-J.; Müller-Bollenhagen, C.; Zimmermann, M.;
Schröder, X.; Engel, B.; Große-Wöhrmann, A.;
Suttmeier, F.-T: Modelling and Closed-loop Control
of Complex Tube Forming Based on an Optimized
Application of Martensite Formation in Austenitic
Stainless Steels. 79 (2008) No. 10, 745-752. DOI:
10.2374/SRI08SP082
Chu, M.; Shen, F.; Sundelin, B.; Paulsson, K.; Kapilashrami,
E.; Wei, G.; Shen, Y. : Industrial Practice of BiPCI
Process of Pulverized Coal Injection for Blast Furnace
Ironmaking at SSAB. 79 (2008) No. 1, 11-16. DOI:
10.2374/SRI07SP053
Cramb, A.W.; Wang, W.: The Effect of the Transition Metal
Oxide Content of a Mold Flux on the Radiation Heat
Transfer Rates. 79 (2008) No. 4, 271-277. DOI:
10.2374/SRI07SP079-79-2008-271
Cwiekala, T.; Brosius, A.; Tekkaya, A.E.; Grydin, O.;
Schaper, M.; Bach, F.-W.; Barthel, C.; Svendsen, B.:
Efficient Modelling and Simulation of Process Chains
in Sheet Metal Forming and Processing. 79 (2008) No.
10, DOI: 731-737
10.2374/SRI08SP058
D
Casting. 79 (2008) No. 11, 839-842. DOI:
10.2374/SRI08SP037
Denkena, B.; Boehnke, D.; Breidenstein, B.: Development of
New Combined Manufacturing Technologies –
Influence of the Cutting Process on Workpiece
Properties. 79 (2008) No. 3, 196-201. DOI:
10.2374/SRI07SP123-79-2008-196-201
Denkena, B.; Acker, W.: Dimensional Measurement by
Projection of Locally Adapted Patterns.
79 (2008) No. 3, 208-212. DOI:
10.2374/SRI07SP125-79-2008-208-212
Diebel, M.; Reimche, W.; Bach, F.-W.; Mroz, G.; Duhm, R.;
Bernard, M.: High Strength 3D Non-Vacuum
Electron Beam Weld Joints - Setting of Gradient
Material Properties and Testing of Weld Quality.
79 (2008) No. 3, 225-231. DOI:
10.2374/SRI07SP128-79-2008-225-232
Dixon, A.E.; Yuen, W.Y.D.: A Physical Based Method to
Predict Spread and Shape during Flat Rolling for
Real-Time Application. 79 (2008) No. 4, 287-296.
DOI: 10.2374//SRI07SP045-79-2008-287
Duhm, R.; Reimche, W.; Bach, F.-W.; Mroz, G.; Bernard, M.;
Diebel, M.: High Strength 3D Non-Vacuum
Electron Beam Weld Joints - Setting of Gradient
Material Properties and Testing of Weld Quality.
79 (2008) No. 3, 225-231. DOI:
10.2374/SRI07SP128-79-2008-225-232
De Cooman, B.C.; Krizan, D.: Analysis of the Strain-Induced
Martensitic Transformation of Retained Austenite in
Cold Rolled Micro-Alloyed TRIP Steel.
79 (2008) No. 7, 513-522. DOI:
10.2374/SRI07SP100-79-2008-513
De Cooman, B.C.; Milititsky, M.; Van Caenegem, N.:
Structural and Magnetic Transformations in the FeMn Binary System. 79 (2008) No. 2, 156-159. DOI:
10.2374/SRI07SP062-79-2008-156-159
Degenhardt, R.; Raabe, D.; Sellger, R.; Klos, W.; Sachtleber,
M.; Ernenputsch, L.: Advances in the Optimization
of Thin Strip Cast Austenitic 304 Stainless Steel.
79 (2008) No. 6, 440-444. DOI:
10.2374/SRI015-79-2008-440
Delannay, F.; Mertens, A.; Jacques, P.J.; Sietsma, J.: Relative
Influences of Aluminium and Silicon on the Kinetics
of Bainite Formation from Intercritical Austenite
79 (2008) No. 12, 954-959. DOI:
10.2374/SRI08SP068
Demofonti, G.; Kaufmann, H.; Sonsino, C.M.; Riscifuli, S.:
High-Strength Steels in Welded State for LightWeight Constructions under High and Variable
Stress Peaks. 79 (2008) No. 5, 382-389. DOI:
10.2374/SRI06SP151-79-2008-382
Deng, K; Yu, Z.; Lei, Z.; Li, Q.; Ren, Z.: Physical Simulation
of Nozzle Electromagnetic Brake in Twin-Roll Strip
E
79 (2008) No. 1, 47-58. DOI: 10.2374/SRI07SP033
Engel, B.; Müller-Bollenhagen, C.; Zimmermann, M.; Christ,
H.-J.; Schröder, X.; Große-Wöhrmann, A.; Suttmeier,
F.-T.: Modelling and Closed-loop Control of Complex
Tube Forming Based on an Optimized Application of
Martensite Formation in Austenitic Stainless Steels. 79
(2008) No. 10, 745-752, Doi: 10.2374/SRI08SP082
Engler, O.; Kang, H.G.; Huh, M.H.; Park, S.H.: Effect of
Lubrication during Hot Rolling on the Evolution of
Through-Thickness Textures in 18%Cr Ferritic
Stainless Steel Sheet. 79 (2008) No. 6, 489-496. DOI:
10.2374/SRI08SP034-79-2008-489
Ernenputsch, L.; Raabe, D.; Degenhardt, R.; Sellger, R.; Klos,
W.; Sachtleber, M.: Advances in the Optimization of
Thin Strip Cast Austenitic 304 Stainless Steel.
79 (2008) No. 6, 440-444. DOI:
10.2374/SRI015-79-2008-440
Esderts, A.; Masendorf, R.; Medhurst, T.: Influence of
Forming on the Cyclic Behaviour of TRIP700.
79 (2008) No. 3, 213-218. DOI:
10.2374/SRI07SP126-79-2008-213-218
Eiken, J.; Böttger, B.; Apel, M.; Schaffnit, P.; Steinbach, I.:
Phase-Field Simulation of Solidification and SolidState Transformations in Multicomponent Steels.
79 (2008) No. 8, 608-616. DOI:
10.2374/SRI08SP021-79-2008-608
Eissa, M.; Mattar, T.; El-Fawakhry, K.; Halfa, H.: Effect of
Nitrogen Alloying on Sulphur Behaviour during ESR
of AISI M41 Steel. 79 (2008) No. 9, 691-697. DOI:
10.2374/SRI07SP077-79-2008-691
El-Fawakhry, K.; Mattar, T.; Halfa, H.; Eissa, M.: Effect of
Nitrogen Alloying on Sulphur Behaviour during ESR
of AISI M41 Steel. 79 (2008) No. 9, 691-697. DOI:
10.2374/SRI07SP077-79-2008-691
Ender, A.; Toulouse, C.; Pack, A.; Petry, S.: Stable Oxygen
Isotopes for Tracing the Origin of Clogging in
Continuous Casting Submerged Entry Nozzles.
79 (2008) No. 2, 149-155. DOI:
10.2374/SRI07SP099-79-2008-149-155
Engberg, G.; Lissel, L.: A Physically based Microstructure
Model for Predicting the Microstructural Evolution of
a C-Mn Steel during and after Hot Deformation.
F
Fang, J.; Li, C.; Wang, X.; Ren, R.: Raw Material Strength in
a Blast Furnace at Operating Temperature. 79 (2008)
No. 1, 5-10, DOI: 10.2374/SRI07SP044
Fei, S.; Wu, K.; Chen, H.; Xu, W.; He, H.; Zhou, X.: Ratio
between Unconsumed Coal and Coke Particle in BF
Dust, 79 (2008) No. 12, 899-903. DOI:
10.2374/SRI08SP053
Feng, H.; Xu, L.; Mao, W.; Yang, P.: Influence of Texture on
Magnetic Aging of Cold Rolling Non-oriented
Silicon Steel Sheets. 79 (2008) No. 9, 717-720. DOI:
10.2374/SRI07SP132-79-2008-717
Feng, M.; Li, Q.; Zou, Z.: An Outlier Identification and
Judgment Method for an Improved Neural-Network
BOF Forecasting Model. 79 (2008) No. 5, 323-332.
DOI: 10.2374/SRI07SP051-2008-323
Flores-Sanchez, P.; Garcia-Ramos, E.; Romero-Serrano, A.;
Zeifert, B.; Hallen-Lopez, M.;
Palacios,
E.G.:
Immobilization of Chromium in Slags using MgO
and Al2O3. 79 (2008) No. 5, 332-339. DOI:
10.2374/SRI07SP107-2008-333
Fluch, J.; Presslinger, H.; Ilie, S.; Reisinger, P.: Assessment of
Segregation in Hot Tear Cracks. 79 (2008) No. 12,
924-930. DOI: 10.2374/SRI08SP095
Forstner, K.; Pirker, S.: Analytical and Numerical Approaches
in Studying Immersed Decarbonization in RH
Plants. 79 (2008) No. 8, 591-599. DOI:
10.2374/SRI07SP096-79-2008-591
Franzke, M.; Recker, D.; Hirt, G.: Development of a Process
Model for Online-Optimization of Open Die Forging
of Large Workpieces. 79 (2008) No. 10, 753-757.
DOI: 10.2374/SRI08SP067
Frommeyer, G.; Rablbauer, R.: High Temperature Materials
Based on the Intermetallic Compound NiAl
Reinforced by Refractory Metals for Advanced
Energy Conversion Technologies. 79 (2008) No. 7,
507-512. DOI: 10.2374/SRI08SP101-79-2008-507
Fu, H.; Kuang, J.; Wang, L.: Microstructure,
Mechanical
Properties and Abrasive Wear Behaviour of Si-MnCr-B Cast Steel as a Function of Carbon
Concentration. 79 (2008) No. 9, 721-718. DOI:
10.2374/SRI07SP112-79-2008-721
Fushi-tani, K.; Matsu-suye, M.; Hasegawa, M.; Iwase, M.:
Electrochemical
Measurements
of
Oxygen
Potentials in the Slag System CaO-P2O5-SiO2FexO. 79 (2008) No. 9, 678-684. DOI:
10.2374/SRI07SP139-79-2008-678
G
Gan, Y.; Liu, H.; Zhang, H.: Prediction of Local Heat Flux
and Temperature Distribution in a Mould Copper
Plate for Flexible Thin Slab Casting Based on Inplant Temperature Measurements. 79 (2008) No. 11,
843-851. DOI: 10.2374/SRI07SP133-79-2008-843
Garbarz, B.; Marcisz, J.: Characterisation of Dispersed NanoSulphides Precipitated in Low Carbon Steel
Solidified under High Rate of Cooling.
79 (2008) No. 7, 523-529. DOI:
10.2374/SRI07SP135-79-2008-523
Garcia-Ramos, E.; Romero-Serrano, A.; Zeifert, B.; FloresSanchez, P.; Hallen-Lopez, M.; Palacios, E.G.:
Immobilization of Chromium in Slags using MgO
and Al2O3. 79 (2008) No. 5, 332-339. DOI:
10.2374/SRI07SP107-2008-333
Gavriljuk, V. G.; Tyshchenko, A.; Bliznuk, V.V.; Yakovleva,
I.L.; Riedner, S.; Berns, H.: Cold Work Hardening
of High-Strength Austenitic Steels. 79 (2008) No. 6,
413-422. DOI: 10.2374/SRI08SP051-79-2008-413
Gawad, J.; Niznik, B.; Kuziak, R.; Pietrzyk, M.: Validation of
Multi-scale Model Describing Microstructure
Evolution in Steels. 79 (2008) No. 8, 652-659. DOI:
10.2374/SRI08SP029-79-2008-652
Geiger, M.; Lechler, J.; Merklein, M.: Determination of
Thermal and Mechanical Material Properties of
Ultra-High Strength Steels for Hot Stamping.
79 (2008) No. 2, 98-104. DOI:
10.2374/SRI07SP131-79-2008-98-104
Gittler, P.; Javurek, M.; Barna, M.; Rockenschraub, K.;
Lechner, M.: Flow Modelling in Continuous Casting
of Round Bloom Strands with Electromagnetic
Stirring. 79 (2008) No. 8, 617-626. DOI:
10.2374/SRI08SP027-79-2008-617
Glowacki, M.; Hojny, M.: Computer Modelling of Deformation of Steel Samples with Mushy Zone. 79 (2008)
No. 11, 868-874. DOI: 10.2374/SRI08SP083
Gomez, M.; Rancel, L.; Medina, S.F.: Influence of Microalloying Elements (Nb, V, Ti) on Yield Strength in
Bainitic Steels. 79 (2008) No. 12, 947-953. DOI:
10.2374/SRI08SP064
Granbom, Y.: Effects of Process Parameters prior to
Annealing on the Formability of Two Cold Rolled
dual Phase Steels. 79 (2008) No. 4, 297-305. DOI:
10.2374/SRI07SP076-79-2008-297
Groche, P.; v. Breitenbach, G.: Roll Forming Strategies for
Welded Tubes. 79 (2008) No. 1, 40-46. DOI:
10.2374/SRI07048
Große-Wöhrmann, A.; Müller-Bollenhagen, C.; Zimmermann,
M.; Christ, H.-J.; Schröder, X.; Engel, B.; Suttmeier,
F.-T.: Modelling and Closed-loop Control of
Complex Tube Forming Based on an Optimized
Application of Martensite Formation in Austenitic
Stainless Steels. 79 (2008) No. 10, 745-752. DOI:
10.2374/SRI08SP082
Gruber, D.; Harmuth, H.: Durability of Brick Lined Steel
Ladles from a Mechanical Point of View. 79 (2008)
No. 12, 913-917. DOI: 10.2374/SRI08SP071
Grüning, A.; Krauß, M.; Scholtes, B.: Isothermal Fatigue of
Tool Steel AISI H11. 79 (2008) No. 2, 111-115.
DOI: 10.2374/SRI07SP110-79-2008-111-115
Grydin, O.; Cwiekala, T.; Brosius, A.; Tekkaya, A.E.;
Schaper, M.; Bach, F.-W.; Barthel, C.; Svendsen, B.:
Efficient Modelling and Simulation of Process
Chains in Sheet Metal Forming and Processing. 79
(2008) No. 10, 731-737. DOI: 10.2374/SRI08SP058
Gu, M.; Zhang, M.C.; Selvarasu, N.K.C.; Zhao, Y.; Zhou,
C.Q.: Numerical Analysis of Pulverized Coal
Combustion inside Tuyere and Raceway, 79 (2008)
No. 1, 17-24. DOI: 10.2374/SRI07SP050
Gümpel, P.; Hochstrasser-Kurz, S.; Arlt, N.: Sensitization
Behaviour of Manganese-Alloyed Austenitic
Stainless Steels. 79 (2008) No. 6, 445-448. DOI:
10.2374/SRI08SP055-79-2008-445
Gunnarsson, S.; Medvedeva, A.; Bergström, J.: Inclusions,
Stress Concentrations and Surface Condition in
Bending Fatigue of H13 Tool Steel. 79 (2008) No. 5,
376-381. DOI: 10.2374/SRI07SP083-79-2008-376
Guo, L.; Wang, N.; Xie, X.; Zou, Z.; Xu, W.; Zhou, Y.:
Analysis of Material and Energy Consumption of
Corex C3000. 79 (2008) No. 7, 547-552. DOI:
10.2374/SRI08NT007-79-2008-547
H
Hackl, H.; Agudo, L.; Jank, N.; Wagner, J.; Weber, S.;
Schmaranzer, C.; Arenholz, E.; Bruckner, J.;
Pyzalla, A.R.: Investigation of Microstructure and
Mechanical Properties of Steel-Aluminium Joints
Produced by Metal Arc Joining. 79 (2008) No. 7,
530-535. DOI: 10.2374/SRI08SP022-79-2008-530
Hadasik, E.; Schindler, I.; Kawalla, R.; Plura, J.; Kubina, T.;
Rusz, S.; Jurko, V.: Model of Mean Flow Stress of
Ti-IF Steel Considering Effect of Phase
Transformations. 79 (2008) No. 10, 758-764. DOI:
10.2374/SRI08SP002
Haferkamp, H.; Schimek, M.; Meier, O.; Ostendorf, A.:
Increasing Rigidity and Strength using Local Effects
of Bead-on-Plate Laser Welding Beam.
79 (2008) No. 3, 191-195. DOI:
10.2374/SRI07SP121-79-2008-191-195
Hagen, T.; Behrens, B.-A.; Mielke, J.; Sidhu, K. B.:
Production of Structure Components with Selective
Properties by means of Action Media based Cold
Forming. 79 (2008) No. 3, 233-239. DOI:
10.2374/SRI07SP122-79-2008-233-239
Haidemenopoulos, G.N.; Katsamas, A.I.: A Semi–Empirical
Model for the evolution of Retained Austenite via
Bainitic Transformation in Multiphase TRIP Steels.
79
(2008)
No.
11,
875-884.
DOI:
10.2374/SRI08SP065
Halfa, H.; Mattar, T.; El-Fawakhry, K.; Eissa, M.: Effect of
Nitrogen Alloying on Sulphur Behaviour during
ESR of AISI M41 Steel. 79 (2008) No. 9, 691-697.
DOI: 10.2374/SRI07SP077-79-2008-691
Hallen-Lopez, M.; Garcia-Ramos, E.; Romero-Serrano, A.;
Zeifert, B.; Flores-Sanchez, P.; Palacios, E.G.:
Immobilization of Chromium in Slags using MgO
and Al2O3. 79 (2008) No. 5, 332-339. DOI:
10.2374/SRI07SP107-2008-333.
Harmuth, H.; Gruber, D.: Durability of Brick Lined Steel
Ladles from a Mechanical Point of View. 79 (2008)
No. 12, 913-917. DOI: 10.2374/SRI08SP071
Hasegawa, M.; Matsu-suye, M.; Fushi-tani, K.; Iwase, M.:
Electrochemical
Measurements
of
Oxygen
Potentials in the Slag System CaO-P2O5-SiO2FexO. 79 (2008) No. 9, 678-684. DOI:
10.2374/SRI07SP139-79-2008-678
He, H.; Wu, K.; Chen, H.; Xu, W.; Zhou, X.; Fei, S.: Ratio
between Unconsumed Coal and Coke Particle in BF
Dust. 79 (2008) No. 12, 899-903. DOI:
10.2374/SRI08SP053
He, J.; Wang, K.; Wang, Q.; Liu, C.: Influence of Vanadium
on Grain Growth of Deformation Induced Ferrite in
Low Carbon Steel during Continuous Cooling
Process. 79 (2008) No. 9, 712-716. DOI:
10.2374/SRI07SP093-79-2008-712
Hedström, P.; Knutsson, A.; Oden, M.: Reverse Martensitic
Transformation and Resulting Microstructure in a
Cold Rolled Metastable Austenitic Stainless Steel.
79 (2008) No. 6, 433-439. DOI:
10.2374/SRI08SP039-79-2008-433
Heigl, G.; Lengauer, H.; Hodnik, P.: Heavy Wall Thermo mechanically
Rolled
Plates
for
Offshore
Construction Use. 79 (2008) No. 12, 931-937. DOI:
10.2374/SRI08SP091
Hein, P.; Wilsius, J.: Status and Innovation Trends in Hot
Stamping of USIBOR 1500 P, 79 (2008) No. 2, 8591. DOI: 10.2374/SRI08SP010-79-2008-85-91
Helle, M.; Saxen, H.: Data-driven Analysis of Sulfur Flows
and Behaviour in the Blast Furnace. 79 (2008) No. 9,
671-677. DOI: 10.2374/SRI08SP035-79-2008-671
Herrera, C.; Ponge, D.; Raabe, D.: Characterization of the
Microstructure, Crystallographic Texture and
Segregation of an As-cast Duplex Stainless Steel
Slab. 79 (2008) No. 6, 482-488. DOI:
10.2374/SRI08SP014-79-2008-482
Hertzman, S.; Westin, E.M.; Brolund, B.: Weldability Aspects
of a Newly Developed Duplex Stainless Steel LDX
2101. 79 (2008) No. 6, 473-481. DOI:
10.2374/SRI08SP046-79-2008-473
Hinton, J.S.; Beynon, J.H.: A Laboratory Steckel Mill
Simulation. 79 (2008) No. 4, 278-286. DOI:
10.2374/SRI07SP060-79-2008-278
Hirt, G.; Franzke, M.; Recker, D.: Development of a Process
Model for Online-Optimization of Open Die Forging
of Large Workpieces. 79 (2008) No. 10, 753-757.
DOI: 10.2374/SRI08SP067.
Hochrainer, T.; Prakash, A.; Reisacher, E.; Riedel, H.:
Twinning Models in Self-Consistent Texture
Simulations of TWIP Steels. 79 (2008) No. 8, 645652. DOI: 10.2374/SRI08SP030-79-2008-645
Hochstrasser-Kurz, S.; Gümpel, P.; Arlt, N.: Sensitization
Behaviour of Manganese-Alloyed Austenitic
Stainless Steels. 79 (2008) No. 6, 445-448. DOI:
10.2374/SRI08SP055-79-2008-445
Hodnik, P.; Heigl, G.; Lengauer, H.: Heavy Wall Thermo mechanically
Rolled
Plates
for
Offshore
Construction Use. 79 (2008) No. 12, 931-937. DOI:
10.2374/SRI08SP091
Hojny, M.; Glowacki, M.: Computer Modelling of
Deformation of Steel Samples with Mushy Zone. 79
(2008) No. 11, 868-874. DOI: 10.2374/SRI08SP083
Hömberg, D.; Suwanpinij, P.; Togobytska, N.; Keul, C.;
Weiss, W.; Prahl, U.: Phase Transformation
Modelling and Parameter Identification from
Dilatometric Investigations. 79 (2008) No. 10, 793799. DOI: 10.2374/SRI08SP060
Houbaert, Y.; Van Caenegem, N.; Verbeken, K.; Segers, D.:
Improvement of the Shape Memory Effect in Febased Alloys by Training. 79 (2008) No. 4, 314-320.
DOI: 10.2374/SRI07SP130-79-2008-314
Houbaert, Y.; Bouquerel, J.; Verbeken, K.; Krizan, D.; Barbe,
L.; Verleysen, P.: Evaluation of the Static StressStrain Behaviour of Phosphorus Alloyed and
Titanium Micro-alloyed TRIP Steels. 79 (2008) No.
10, 784-792. DOI: 10.2374/SRI08SP019
Hu, H.-T. ; Wei, J.-H.: Mathematical Modelling of Nonequilibrium Decarburization Process during Vacuum
Circulation Refining of Molten Steel: Application of
the Model and Results (I) - Decarburization Process
and Influences of Some Technological Factors.
79 (2008) No. 4, 243-253. DOI:
10.2374/SRI07SP102-79-2008-243
Hu, H.-T.; Wei, J.-H.: Mathematical Modelling of Nonequilibrium Decarburization Process during Vacuum
Circulation Refining of Molten Steel: Application of
the Model and Results (II) - Non-equilibrium
Factors and their Influences on the Decarburization
Process. 79 (2008) No. 4, 253-260, DOI:
10.2374/SRI07SP103-79-2008-253
Hu, H.-T.; Wei, J.-H.: Mathematical Modelling of Nonequilibrium Decarburization Process during Vacuum
Circulation Refining of Molten Steel: Mathematical
Model of the Process. 79 (2008) No. 2, 132-142.
DOI: 10.2374/SRI07SP101-79-2008-132-142
Hübner, K.; Weidig, U.; Steinhoff, K.: Bulk Steel Products
with Functionally Graded Properties Produced by
Differential Thermo-mechanical Processing. 79
(2008) No. 1, 59-65. DOI: 10.2374/SRI07SP059
Hübner, S.; Behrens, B.-A.; Knigge, J.; Voges-Schwieger, K.;
Weilandt, K.: Local Strain-Hardening in Sheet Metal
and Forging Components. 79 (2008) No. 3, 165-171.
DOI: 10.2374/SRI07SP117-79-2008-165-172
Huh, M.H.; Kang, H.G.; Park, S.H.; Engler, O.: Effect of
Lubrication during Hot Rolling on the Evolution of
Through-Thickness Textures in 18%Cr Ferritic
Stainless Steel Sheet. 79 (2008) No. 6, 489-496.
DOI: 10.2374/SRI08SP034-79-2008-489
I, J
Ilie, S.; Presslinger, H.; Fluch, J.; Reisinger, P.: Assessment
of Segregation in Hot Tear Cracks. 79 (2008) No. 12,
924-930. DOI: 10.2374/SRI08SP095
Ilie, S.; Kainz, A.; Parteder, E.; Zeman, K.: From Slab Corner
Cracks to Edge-Defects in Hot Rolled Strip –
Experimental and Numerical Investigations. 79
(2008) No. 11, DOI: 861-867 10.2374/SRI08SP052
Iwase, M.; Matsu-suye, M.; Fushi-tani, K.; Hasegawa, M.:
Electrochemical Measurements of Oxygen Potentials
in the Slag System CaO-P2O5-SiO2-FexO.
79 (2008) No. 9, 678-684. DOI:
10.2374/SRI07SP139-79-2008-678
Jacques, P.J.; Mertens, A.; Sietsma, J.; Delannay, F.: Relative
Influences of Aluminium and Silicon on the Kinetics
of Bainite Formation from Intercritical Austenite. 79
(2008) No. 12, 954-959. DOI: 10.2374/SRI08SP068
Jaklic, A.; Vode, F. ; Kokalj, T.; Matko, D.: A Furnace
Control System for Tracing Reference Reheating
Curves. 79 (2008) No. 5, 364-370. DOI:
10.2374/SRI07SP056-79-2008-364
Jang, J. H.; Kwon, S.O.; Kim, B.J.; Moon, Y. H.:
Investigation on the Hydroforming Characteristics of
Double-layered Tubes. 79 (2008) No. 5, 371-376.
DOI: 10.2374/SRI07SP088
Jank, N.; Agudo, L.; Wagner, J.; Weber, S.; Schmaranzer, C.;
Arenholz, E.; Bruckner, J.; Hackl, H.; Pyzalla, A.R.:
Investigation of Microstructure and Mechanical
Properties of Steel-Aluminium Joints Produced by
Metal Arc Joining. 79 (2008) No. 7, 530-535. DOI:
10.2374/SRI08SP022-79-2008-530
Javurek, M.; Barna, M.; Gittler, P.; Rockenschraub, K.;
Lechner, M.: Flow Modelling in Continuous Casting
of Round Bloom Strands with Electromagnetic
Stirring. 79 (2008) No. 8, 617-626. DOI:
10.2374/SRI08SP027-79-2008-617
Jin, L.; Wang, H.; Wang, F.; Xu, Z.: Composition Control of
CaO-MgO-Al2O3-SiO2 Inclusions in Tire Cord Steel
- a Thermodynamic Analysis. 79 (2008) No. 1, 25-30.
DOI: 10.2374/SRI07SP038
Johansson, P.; Liljas, M.; Liu, H.-P.; Olsson, C.-O. A.:
Development of a Lean Duplex Stainless Steel.
79 (2008) No. 6, 466-473. DOI:
10.2374/SRI08SP043-79-2008-466
Jondhale, K.V.; Wells, M.A.; Militzer, M.; Prodanovic, V.:
Heat Transfer during Multiple Jet Impingement on
the Top Surface of Hot Rolled Steel Strip. 79 (2008)
No. 12, 938-946. DOI: 10.2374/SRI08SP055
Jonsson, L.; Solhed, H.; Jönsson, P.: Modelling of the
Steel/Slag Interface in a Continuous Casting Tundish.
79 (2008) No. 5, 348-357. DOI:
10.2374/SRI07SP111-79-2008-348
Jonsson, L.; Wikström, J.; Nakajima, K.; Jönsson, P.:
Application of a Model for Liquid Inclusion
Separation at a Steel-Slag Interface for Laboratory
and Industrial Situations. 79 (2008) No. 11, 826-834.
DOI: 10.2374/SRI08SP006
Jonsson, L.; Kholmatov, S.; Takagi, S.; Jönsson, P.; Yokoya,
S.: Effect of Nozzle Angle on Flow Field and
Temperature Distribution in a Billet Mould when
using Swirl Flow. 79 (2008) No. 1, 31-39. DOI:
10.2374/SRI07SP023
Jonsson, L.; Kholmatov, S.; Takagi, S.; Jönsson, P.; Yokoya,
S.: Influence of Aspect Ratio on Fluid Flow and Heat
Transfer in Mould when Using Swirl Flow during
Casting. 79 (2008) No. 9, 698-707. DOI:
10.2374/SRI07SP116-79-2008-698
Jönsson, P.; Kholmatov, S.; Takagi, S.; Jonsson, L.; Yokoya,
S.: Influence of Aspect Ratio on Fluid Flow and Heat
Transfer in Mould when Using Swirl Flow during
Casting. 79 (2008) No. 9, 698-707. DOI:
10.2374/SRI07SP116-79-2008-698
Jönsson, P.; Solhed, H.; Jonsson, L.: Modelling of the
Steel/Slag Interface in a Continuous Casting Tundish.
79
(2008)
No.
5,
348-357.
DOI:
10.2374/SRI07SP111-79-2008-348
Jönsson, P.; Wikström, J.; Nakajima, K.; Jonsson, L.:
Application of a Model for Liquid Inclusion
Separation at a Steel-Slag Interface for Laboratory
and Industrial Situations. 79 (2008) No. 11, 826-834.
DOI: 10.2374/SRI08SP006
Jönsson, P.; Björkvall, J.; Andersson, M.; Nzotta, M.: The
Effect of Ladle Treatment on Inclusion Composition
in Tool Steel Production. 79 (2008) No. 4, 261-270.
DOI: 10.2374/SRI07SP075-79-2008-261
Jönsson, P.; Kholmatov, S.; Takagi, S.; Jonsson, L.; Yokoya,
S.: Effect of Nozzle Angle on Flow Field and
Temperature Distribution in a Billet Mould when
using Swirl Flow. 79 (2008) No. 1, 31-39. DOI:
10.2374/SRI07SP023
Jowsa, J.; Warzecha, M.; Warzecha, P.; Pfeifer, H.:
Numerical and Experimental Investigations of Steel
Mixing Time in a 130-t Ladle. 79 (2008) No. 11, 852860. DOI: 10.2374/SRI07SP136-79-2008-852
Jung, S.-M.; Moon, I.-J.: Reduction of Solid Iron Oxide by
Carbon. 79 (2008) No. 9, 667-670. DOI:
10.2374/SRI08SP005-79-2008-667
Jurko, V.; Schindler, I.; Kawalla, R.; Plura, J.; Kubina, T.;
Rusz, S.; Hadasik, E.: Model of Mean Flow Stress of
Ti-IF Steel Considering Effect of Phase
Transformations. 79 (2008) No. 10, 758-764. DOI:
10.2374/SRI08SP002
K
Kainz, A.; Ilie, S.; Parteder, E.; Zeman, K.: From Slab Corner
Cracks to Edge-Defects in Hot Rolled Strip –
Experimental and Numerical Investigations. 79
(2008) No. 11, 861-867. DOI: 10.2374/SRI08SP052
Kampermann, A.A.; Kromhout, J.A.; Melzer, S.; Zinngrebe,
E.W.; Boom, R.: Mould Powder Requirements for
High-speed Casting. 79 (2008) No. 2, 143-148. DOI:
10.2374/SRI07SP069-79-2008-143-148
Kang, H.G.; Huh, M.H.; Park, S.H.; Engler, O.: Effect
of
Lubrication during Hot Rolling on the Evolution of
Through-Thickness Textures in 18%Cr Ferritic
Stainless Steel Sheet. 79 (2008) No. 6, 489-496. DOI:
10.2374/SRI08SP034-79-2008-489
Kapilashrami, E.; Shen, F.; Sundelin, B.; Paulsson, K.; Wei,
G.; Chu, M.; Shen, Y.: Industrial Practice of BiPCI
Process of Pulverized Coal Injection for Blast
Furnace Ironmaking at SSAB. 79 (2008) No. 1, 1116. DOI: 10.2374/SRI07SP053
Karjalainen, L.P.; Taulavuori, T.; Sellmann, M.; Kyröläinen,
A.: Some Strengthening Methods for Austenitic
Stainless Steels. 79 (2008) No. 6, 404-412. DOI:
10.2374/SRI08SP040-79-2008-404
Karlsohn, M.; Silva, P.A.; Weber, S.; Theisen, W.; Reimers,
W.; Pyzalla, A.R.: Interface Characterization of
Abrasion Resistant Coatings Co-Extruded on Steel
Substrates. 79 (2008) No. 11, 885-894. DOI:
10.2374/SRI08SP049
Katsamas, A.I.; Haidemenopoulos, G.N.: A Semi–Empirical
Model for the evolution of Retained Austenite via
Bainitic Transformation in Multiphase TRIP Steels.
79 (2008) No. 11, 875-884. DOI:
10.2374/SRI08SP065
Kattenbelt, C.; Spelbos, E.; Mink, P.; Roffel, B.: Detection of
Slopping in Basic Oxygen Steelmaking using a
Camera Viewing the Converter Mouth. 79 (2008) No.
11, 821-825. DOI: 10.2374/SRI08SP065
Kaufmann, C.; Kawalla, R.; Krause, G.: Development of
Simulation Software for the Analysis of Multi-stage
Hot Rolling Processes. 79 (2008) No. 10, 738-744.
DOI: 10.2374/SRI08SP059
Kaufmann, H.; Sonsino, C.M.; Demofonti, G.; Riscifuli, S.:
High-Strength Steels in Welded State for LightWeight Constructions under High and Variable Stress
Peaks. 79 (2008) No. 5, 382-389. DOI:
10.2374/SRI06SP151-79-2008-382
Kawalla, R.; Krause, G.; Kaufmann, C.: Development of
Simulation Software for the Analysis of Multi-stage
Hot Rolling Processes. 79 (2008) No. 10, 738-744.
DOI: 10.2374/SRI08SP059
Kawalla, R.; Schindler, I.; Plura, J.; Kubina, T.; Rusz, S.;
Hadasik, E.; Jurko, V.: Model of Mean Flow Stress of
Ti-IF Steel Considering Effect of Phase
Transformations. 79 (2008) No. 10, 758-764. DOI:
10.2374/SRI08SP002
Kawalla, R.; Siodlak, D.; Lotter, U.; Schwich, V.: Modelling
of the Mechanical Properties of Low Alloyed
Multiphase Steels with Retained Austenite Taking
into Account Strain-Induced Transformation. 79
(2008) No. 10, 776-783. DOI: 10.2374/SRI08SP033
Kepplinger, W.L.; Berger, K.; Weiß, Ch.: CFD Simulation of
the Carbon Dust Combustion in the COREX® Melter
Gasifier, 79 (2008) No. 8, 579-585. DOI:
10.2374/SRI08SP023-79-2008-579
Keul, C.; Suwanpinij, P.; Togobytska, N.; Weiss, W.; Prahl,
U.; Hömberg, D.: Phase Transformation Modelling
and Parameter Identification from Dilatometric
Investigations. 79 (2008) No. 10, 793-799. DOI:
10.2374/SRI08SP060
Kharicha, A.; Schützenhöfer, W.; Ludwig, A.; Tanzer, R.;
Wu, M.: On the Importance of Electric Currents
Flowing directly into the Mould during an ESR
Process. 79 (2008) No. 8. 632-636. DOI:
10.2374/SRI08SP016-79-2008-632
Kharicha, A.; Pfeiler, C.; Thomas, B.G.; Wu, M.; Ludwig,
A.: Solidification and Particle Entrapment during
Continuous Casting of Steel 79 (2008) No. 8, 599607. DOI: 10.2374/SRI08SP024-79-2008-599
Kholmatov, S.; Takagi, S.; Jönsson, P.; Jonsson, L.; Yokoya,
S.: Influence of Aspect Ratio on Fluid Flow and Heat
Transfer in Mould when Using Swirl Flow during
Casting. 79 (2008) No. 9, 698-707. DOI:
10.2374/SRI07SP116-79-2008-698
Kholmatov, S.; Takagi, S.; Jonsson, L.; Jönsson, P.; Yokoya,
S.: Effect of Nozzle Angle on Flow Field and
Temperature Distribution in a Billet Mould when
using Swirl Flow. 79 (2008) No. 1, 31-39. DOI:
10.2374/SRI07SP023
Kim, B.J.; Jang, J. H.; Kwon, S.O.; Moon, Y. H.:
Investigation on the Hydroforming Characteristics of
Double-layered Tubes. 79 (2008) No. 5, 371-376.
DOI: 10.2374/SRI07SP088
Kitamura, S.; Shibata, H.; Maruoka, N.: Kinetic Model of
Hot Metal Dephosphorization by Liquid and Solid
Coexisting Slags 79 (2008) No. 8, 586-590. DOI:
10.2374/SRI08SP003-79-2008-586
Klemm, V.; Simek, D.; Rafaja, D.; Motylenko, M.; Schreiber,
G.; Brethfeld, A.; Lehmann, G. : XRD Analysis of
Local Strain Fields in Pearlitic Steels – towards the
Fast Examination of Microstructure after Hot Rolling.
79 (2008) No. 10, 800-808. DOI:
10.2374/SRI08SP057
Klos, W.; Raabe, D.; Degenhardt, R.; Sellger, R.; Sachtleber,
M.; Ernenputsch, L.: Advances in the Optimization
of Thin Strip Cast Austenitic 304 Stainless Steel.
79 (2008) No. 6, 440-444. DOI:
10.2374/SRI015-79-2008-440
Knigge, J.; Behrens, B.-A.; Hübner, S.; Voges-Schwieger, K.;
Weilandt, K.: Local Strain-Hardening in Sheet Metal
and Forging Components. 79 (2008) No. 3, 165-171.
DOI: 10.2374/SRI07SP117-79-2008-165-172
Knutsson, A.; Hedström, P.; Oden, M.: Reverse Martensitic
Transformation and Resulting Microstructure in a
Cold Rolled Metastable Austenitic Stainless Steel.
79 (2008) No. 6, 433-439. DOI:
10.2374/SRI08SP039-79-2008-433
Kokalj, T.; Vode, F.; Jaklic, A.; Matko, D.: A Furnace
Control System for Tracing Reference Reheating
Curves. 79 (2008) No. 5, 364-370. DOI:
10.2374/SRI07SP056-79-2008-364
Koll, T.; Swaminathan, S.; Pohl, M.; Wieck, A.D.; Spiegel,
M.: Hot Dip Galvanizing Simulation of Interstitial
Free Steel by Liquid Zinc Spin Coater: Influence of
Dew Point on Surface Chemistry and Wettability.
79 (2008) No. 1, 66-72. DOI:
10.2374/SRI07SP084
Könözsy, L.; Wu, M.; Ludwig, A.; Schützenhöfer, W.;
Tanzer, R.: On the Formation of Macrosegregations
in Steel Ingot Castings. 79 (2008) No. 8, 637-644.
DOI: 10.2374/SRI08SP020-79-2008-637
Kostoj, V.; Mithieux, J.-D.; Chassagne, F.; Charles, J.: New
Stainless Steel Solutions as Economic Alternatives to
Classical 1.4301 Austenitic Grades. 79 (2008) No. 6,
449-454. DOI: 10.2374/SRI08SP062-79-2008-449
Kozeschnik, E.; Pudar, M.; Sormann, A.; Parteder, E.:
Numerical Analysis of the Nb(C,N) Precipitation
Kinetics in Microalloyed Steels. 79 (2008) No. 8,
660-664. DOI: 10.2374/SRI08SP018-79-2008-660
Krause, G.; Kawalla, R.; Kaufmann, C.: Development of
Simulation Software for the Analysis of Multi-stage
Hot Rolling Processes. 79 (2008) No. 10, 738-744.
DOI: 10.2374/SRI08SP059
Krauss, G.; Tague, C. B.; Mataya, M.C.; Matlock, D.K.:
Sheet Formability and Performance of Metastable
Austenitic Stainless Steels. 79 (2008) No. 6, 423-432.
DOI: 10.2374/SRI08SP042-79-2008-423
Krauß, M.; Grüning, A.; Scholtes, B.: Isothermal Fatigue of
Tool Steel AISI H11. 79 (2008) No. 2, 111-115. DOI:
10.2374/SRI07SP110-79-2008-111-115
Krizan, D.; De Cooman, B.C.: Analysis of the Strain-Induced
Martensitic Transformation of Retained Austenite in
Cold Rolled Micro-Alloyed TRIP Steel.
79 (2008) No. 7, 513-522. DOI:
10.2374/SRI07SP100-79-2008-513
Krizan, D.; Bouquerel, J.; Verbeken, K.; Barbe, L.;
Verleysen, P.; Houbaert, Y.: Evaluation of the Static
Stress-Strain Behaviour of Phosphorus Alloyed and
Titanium Micro-alloyed TRIP Steels. 79 (2008) No.
10, 784-792. DOI: 10.2374/SRI08SP019
Kromhout, J.A.; Melzer, S.; Zinngrebe, E.W.; Kampermann,
A.A.; Boom, R.: Mould Powder Requirements for
High-speed Casting. 79 (2008) No. 2, 143-148. DOI:
10.2374/SRI07SP069-79-2008-143-148
Kuang, J.; Fu, H.; Wang, L.: Microstructure,
Mechanical
Properties, and Abrasive Wear Behaviour of Si-MnCr-B Cast Steel as a Function of Carbon
Concentration. 79 (2008) No. 9, 721-718. DOI:
10.2374/SRI07SP112-79-2008-721
Kubina, T.; Schindler, I.; Kawalla, R.; Plura, J., Rusz, S.;
Hadasik, E.; Jurko, V.: Model of Mean Flow Stress of
Ti-IF Steel Considering Effect of Phase
Transformations. 79 (2008) No. 10, 758-764. DOI:
10.2374/SRI08SP002
Kuziak, R.; Gawad, J.; Niznik, B.; Pietrzyk, M.: Validation of
Multi-scale Model Describing Microstructure
Evolution in Steels. 79 (2008) No. 8, 652-659. DOI:
10.2374/SRI08SP029-79-2008-652
Kwon, S.O.; Jang, J. H.; Kim, B.J.; Moon, Y. H.:
Investigation on the Hydroforming Characteristics of
Double-layered Tubes. 79 (2008) No. 5, 371-376.
DOI: 10.2374/SRI07SP088
Kyröläinen, A.; Karjalainen, L.P.; Taulavuori, T.; Sellmann,
M.: Some Strengthening Methods for Austenitic
Stainless Steels. 79 (2008) No. 6, 404-412. DOI:
10.2374/SRI08SP040-79-2008-404
L
Lamut, J.; Medved, J.; Zdovc, M.; Mrvar, P.: Influence of
SiO2 Addition on the Properties of Al2O3-CaO-CaF2
Slag. 79 (2008) No. 12, 908-912. DOI:
10.2374/SRI08SP044
Lange, G.; Palkowski, H.: Production of Tailored High Strength
Hybrid Sandwich Structures. 79 (2008) No. 3, 178-185.
DOI: 10.2374/SRI07SP119-79-2008-178-185
Lechler, J.; Merklein, M.; Geiger, M.: Determination of Thermal and Mechanical Material Properties of Ultra-High
Strength Steels for Hot Stamping. 79 (2008) No. 2, 98104. DOI: 10.2374/SRI07SP131-79-2008-98-104
Lechner, M.; Javurek, M.; Barna, M.; Gittler, P.;
Rockenschraub, K.: Flow Modelling in Continuous
Casting
of
Round
Bloom
Strands
with
Electromagnetic Stirring. 79 (2008) No. 8, 617-626.
DOI: 10.2374/SRI08SP027-79-2008-617
Lehmann, G.; Simek, D.; Rafaja, D.; Motylenko, M.; Klemm,
V.; Schreiber, G.; Brethfeld, A.: XRD Analysis of
Local Strain Fields in Pearlitic Steels – towards the
Fast Examination of Microstructure after Hot Rolling.
79 (2008) No. 10, 800-808. DOI:
10.2374/SRI08SP057
Lei, Z.; Yu, Z.; Li, Q.; Deng, K.; Ren, Z.: Physical Simulation
of Nozzle Electromagnetic Brake in Twin-Roll Strip
Casting. 79 (2008) No. 11, 839-842. DOI:
10.2374/SRI08SP037
Lengauer, H.; Heigl, G.; Hodnik, P.: Heavy Wall Thermo mechanically Rolled Plates for Offshore Construction
Use. 79 (2008) No. 12, 931-937. DOI:
10.2374/SRI08SP091
Leskovsek, V.: Correlation between the KIc, the HRc and the
Charpy V-Notch Test Results for H11/H13 Hot-work
Tool Steels at Room Temperature. 79 (2008) No. 4,
306-313. DOI: 10.2374/SRI07SP078-79-2008-306
Li, C.; Fang, J.; Wang, X.; Ren, R.: Raw Material Strength in
a Blast Furnace at Operating Temperature. 79 (2008)
No. 1, 5-10. DOI: 10.2374/SRI07SP044
Li, J.; Chen, W.; Liu, Q.; Wang, X.: Effect of Ultrasonic
Treatment on the Solidification Structure of High
Carbon Steel Containing Rare Earth Elements.
79 (2008) No. 5, 358-363. DOI:
10.2374/SRI07SP086-79-2008-358
Li, J.; Liu, R.; Wei, Ji; Shen, H.; Liu, B.: Numerical
Simulation on Transient Flow Patterns of Upper Rolls
in Continuous Slab Casting Moulds. 79 (2008) No. 8,
626-631. DOI: 10.2374/SRI08SP017-79-2008-626
Li, Q.; Feng, M.; Zou, Z.: An Outlier Identification and
Judgment Method for an Improved Neural-Network
BOF Forecasting Model. 79 (2008) No. 5, 323-332.
DOI: 10.2374/SRI07SP051-2008-323
Li, Q.; Yu, Z.; Lei, Z.; Deng, K.; Ren, Z: Physical Simulation
of Nozzle Electromagnetic Brake in Twin-Roll Strip
Casting. 79 (2008) No. 11, 839-842. DOI:
10.2374/SRI08SP037
Liljas, M.; Johansson, P.; Liu, H.-P.; Olsson, C.-O. A.:
Development of a Lean Duplex Stainless Steel. 79
(2008) No. 6, 466-473. DOI: 10.2374/SRI08SP04379-2008-466.
Lissel, L.; Engberg, G.: A Physically based Microstructure
Model for Predicting the Microstructural Evolution of
a C-Mn Steel during and after Hot Deformation. 79
(2008) No. 1, 47-58. DOI: 10.2374/SRI07SP033
Liu, B.; Liu, R.;Wei, J.; Li, J.; Shen, H.: Numerical Simulation
on Transient Flow Patterns of Upper Rolls in
Continuous Slab Casting Moulds. 79 (2008) No. 8,
626-631. DOI: 10.2374/SRI08SP017-79-2008-626
Liu, C.; Wang, K.; Wang, Q. ; He, J.: Influence of Vanadium
on Grain Growth of Deformation Induced Ferrite in
Low Carbon Steel during Continuous Cooling Process.
79
(2008)
No.
9,
712-716.
DOI:
10.2374/SRI07SP093-79-2008-712
Liu, H.; Zhang, H.; Gan, Y.: Prediction of Local Heat Flux
and Temperature Distribution in a Mould Copper Plate
for Flexible Thin Slab Casting Based on In-plant
Liu,
Liu,
Liu,
Liu,
Temperature Measurements. 79 (2008) No. 11, 843851. DOI: 10.2374/SRI07SP133-79-2008-843
H.-P.; Liljas, M.; Johansson, P.; Olsson, C.-O.:
Development of a Lean Duplex Stainless Steel.
79 (2008) No. 6, 466-473. DOI:
10.2374/SRI08SP043-79-2008-466
Q.; Li, J.; Chen, W.; Wang, X.: Effect of Ultrasonic
Treatment on the Solidification Structure of High
Carbon Steel Containing Rare Earth Elements.
79 (2008) No. 5, 358-363. DOI:
10.2374/SRI07SP086-79-2008-358
R.; Wei, J.; Li, J.; Shen, H.; Liu, B.: Numerical
Simulation on Transient Flow Patterns of Upper Rolls
in Continuous Slab Casting Moulds. 79 (2008) No. 8,
626-631. DOI: 10.2374/SRI08SP017-79-2008-626
X.-H.; Yu, H.-L.; Ren, X.-J.: Behaviour of Longitudinal
Cracks on Slab Surfaces in V-H Rolling Processes.
79 (2008) No. 7, 536-542. DOI:
10.2374/SRI07SP066-79-2008-536
Lotter, U.; Siodlak, D.; Kawalla, R.; Schwich, V.: Modelling
of the Mechanical Properties of Low Alloyed
Multiphase Steels with Retained Austenite Taking into
Account Strain-Induced Transformation. 79 (2008)
No. 10, 776-783. DOI: 10.2374/SRI08SP033
Ludwig, A.; Kharicha, A.; Schützenhöfer, W.; Tanzer, R.; Wu,
M.: On the Importance of Electric Currents Flowing
directly into the Mould during an ESR Process.
79 (2008) No. 8, 632-636. DOI:
10.2374/SRI08SP016-79-2008-632
Ludwig, A.; Wu, M.; Könözsy, L.; Schützenhöfer, W; Tanzer,
R.: On the Formation of Macrosegregations in Steel
Ingot Castings. 79 (2008) No. 8, 637-644. DOI:
10.2374/SRI08SP020-79-2008-637
Ludwig, A.; Pfeiler, C.; Thomas, B.G.; Wu, M.; Kharicha, A.:
Solidification and Particle Entrapment during
Continuous Casting of Steel, 79 (2008) No. 8, 599607. DOI: 10.2374/SRI08SP024-79-2008-599.
M
Ma, Y.; Zang, X.; Wang, X.; Yao, M.; Zhang, L.:
Investigation of Friction Force between Mould and
Strand Shell under Sinusoidal and Non-sinusoidal
Oscillation in Continuous Slab Casting. 79 (2008) No.
7, 564-568. DOI: 10.2374/SRI07SP098-79-2008-564
Mahnken, R; Schneidt, A.: Macromodelling of Transformation
Induced Plasticity combined with Viscoplasticity for
Low-Alloy Steels. 79 (2008) No. 2, 116-123. DOI:
10.2374/SRI07SP137-79-2008-116-123
Maier, H.J.; Tschumak, S.; Weidig, U.; Steinhoff, K.:
Functional Gradation of Low Alloy Steel by
Differentially Controlled Phase Transformation.
79 (2008) No. 2, 105-110. DOI:
10.2374/SRI07SP109-79-2008-105-110
Maikranz-Valentin, M.; Weidig, U.; Schoof, U.; Becker, H.;
Steinhoff, K.: Components with Optimised Properties
due to Advanced Thermo-mechanical Process
Strategies in Hot Sheet Metal Forming. 79 (2008) No.
2, 92-97. DOI :10.2374/SRI07SP115-79-2008-92-97
Mao, W.; Xu, L.; Yang, P.; Feng, H.: Influence of Texture on
Magnetic Aging of Cold Rolling Non-oriented Silicon
Steel Sheets. 79 (2008) No. 9, 717-720. DOI:
10.2374/SRI07SP132-79-2008-717
Mapelli, C.; Nicodemi, W.; Riva, R.F.; Vedani, M.: Analysis
of the Nails from the Roman Legionary at Inchtuthil.
79 (2008) No. 7, 569-576. DOI:
10.2374/SRI07SP108-79-2008-569
Marcisz, J.; Garbarz, B.: Characterisation of Dispersed NanoSulphides Precipitated in Low Carbon Steel Solidified
under High Rate of Cooling. 79 (2008) No. 7, 523529. DOI: 10.2374/SRI07SP135-79-2008-523
Maruoka, N.; Kitamura, S.; Shibata, H.: Kinetic Model of Hot
Metal Dephosphorization by Liquid and Solid
Coexisting Slags. 79 (2008) No. 8, 586-590. DOI:
10.2374/SRI08SP003-79-2008-586
Masendorf, R.; Esderts, A.; Medhurst, T.: Influence of
Forming on the Cyclic Behaviour of TRIP700.
79 (2008) No. 3, 213-218. DOI:
10.2374/SRI07SP126-79-2008-213-218
Masendorf, R.; Schram, A.; Medhurst, T.; Wiche, H.:
Manufacturing and Fatigue Strength of Brazed,
Locally Hardened Structures. 79 (2008) No. 3, 219224. DOI: 10.2374/SRI07SP127-79-2008-219-224
Mataya, M.C.; Tague, C. B.; Matlock, D.K.; Krauss, G.: Sheet
Formability and Performance of Metastable Austenitic
Stainless Steels. 79 (2008) No. 6, 423-432. DOI:
10.2374/SRI08SP042-79-2008-423
Matko, D.; Vode, F.; Jaklic, A.; Kokalj, T.: A Furnace Control
System for Tracing Reference Reheating Curves.
79 (2008) No. 5, 364-370. DOI:
10.2374/SRI07SP056-79-2008-364
Matlock, D.K.; Tague, C. B.; Mataya, M.C.; Krauss, G.: Sheet
Formability and Performance of Metastable Austenitic
Stainless Steels. 79 (2008) No. 6, 423-432. DOI:
10.2374/SRI08SP042-79-2008-423
Matsushita, T.; Umezawa, Y.; Seetharaman, S.: Rupture
Strength of some Mould Flux Slag Films relevant to
Swedish Continuous Casting Practice. 79 (2008) No.
11. DOI: 835-838
10.2374/SRI08SP041
Matsu-suye, M.; Fushi-tani, K.; Hasegawa, M.; Iwase, M.:
Electrochemical Measurements of Oxygen Potentials in
the Slag System CaO-P2O5-SiO2-FexO. 79 (2008) No.
9, 678-684. DOI: 10.2374/SRI07SP139-79-2008-678
Mattar, T.; El-Fawakhry, K.; Halfa, H. Eissa, M.: Effect of
Nitrogen Alloying on Sulphur Behaviour during ESR
of AISI M41 Steel. 79 (2008) No. 9, 691-697. DOI:
10.2374/SRI07SP077-79-2008-691
Medhurst, T.; Esderts, A.; Masendorf, R.: Influence of
Forming on the Cyclic Behaviour of TRIP700.
79 (2008) No. 3, 213-218. DOI:
10.2374/SRI07SP126-79-2008-213-218
Medhurst, T.; Schram, A.; Masendorf, R.; Wiche, H.:
Manufacturing and Fatigue Strength of Brazed,
Locally Hardened Structures. 79 (2008) No. 3, 219224. DOI: 10.2374/SRI07SP127-79-2008-219-224
Medina, S.F.; Rancel, L.; Gomez, M.: Influence of
Microalloying Elements (Nb, V, Ti) on Yield Strength
in Bainitic Steels. 79 (2008) No. 12, 947-953. DOI:
10.2374/SRI08SP064
Medved, J.; Lamut, J.; Zdovc, M.; Mrvar, P.: Influence of
SiO2 Addition on the Properties of Al2O3-CaO-CaF2
Slag. 79 (2008) No. 12, 908-912. DOI:
10.2374/SRI08SP044
Medvedeva, A.; Bergström, J.; Gunnarsson, S.: Inclusions,
Stress Concentrations and Surface Condition in
Bending Fatigue of H13 Tool Steel. 79 (2008) No. 5,
376-381. DOI: 10.2374/SRI07SP083-79-2008-376
Meier, O. ; Schimek, M.; Ostendorf, A.; Haferkamp, H.:
Increasing Rigidity and Strength using Local Effects of
Bead-on-Plate Laser Welding Beam. 79 (2008) No. 3,
191-195. DOI: 10.2374/SRI07SP121-79-2008-191-195
Melzer, S.; Kromhout, J.A.; Zinngrebe, E.W.; Kampermann,
A.A.; Boom, R.: Mould Powder Requirements for
High-speed Casting. 79 (2008) No. 2, 143-148. DOI:
10.2374/SRI07SP069-79-2008-143-148
Meraikib, M.: Effect of Direct Reduced Iron on Oxygen
Distribution between Slag and Bath in Electric Arc
Furnaces, 79 (2008) No. 5, 340-347. DOI:
10.2374/SRI07SP092-79-2008-340
Merklein, M.; Lechler, J.; Geiger, M.: Determination of
Thermal and Mechanical Material Properties of UltraHigh Strength Steels for Hot Stamping. 79 (2008) No.
2, 98-104. DOI: 10.2374/SRI07SP131-79-2008-98-104
Mertens, A.; Jacques, P.J.; Sietsma, J.; Delannay, F.: Relative
Influences of Aluminium and Silicon on the Kinetics
of Bainite Formation from Intercritical Austenite. 79
(2008) No. 12, 954-959. DOI: 10.2374/SRI08SP068
Mielke, J.; Behrens, B.-A.; Hagen, T.; Sidhu, K. B.:
Production of Structure Components with Selective
Properties by means of Action Media based Cold
Forming. 79 (2008) No. 3, 233-239. DOI:
10.2374/SRI07SP122-79-2008-233-239
Milititsky, M.; Van Caenegem, N.; De Cooman, B.C.:
Structural and Magnetic Transformations in the Fe-Mn
Binary System. 79 (2008) No. 2, 156-159. DOI:
10.2374/SRI07SP062-79-2008-156-159
Militzer, M.; Jondhale, K.V.; Wells, M.A.; Prodanovic, V.:
Heat Transfer during Multiple Jet Impingement on the
Top Surface of Hot Rolled Steel Strip. 79 (2008) No.
12, 938-946. DOI: 10.2374/SRI08SP055
Mink, P.; Kattenbelt, C.; Spelbos, E.; Roffel, B.: Detection of
Slopping in Basic Oxygen Steelmaking using a
Camera Viewing the Converter Mouth. 79 (2008) No.
11, 821-825. DOI: 10.2374/SRI08SP065
Mithieux, J.-D.; Kostoj, V.; Chassagne, F.; Charles, J.: New
Stainless Steel Solutions as Economic Alternatives to
Classical 1.4301 Austenitic Grades. 79 (2008) No. 6,
449-454. DOI: 10.2374/SRI08SP062-79-2008-449
Montheillet, F.; Oliveira, de T.R.: Evolution of Microstructure
and Texture during Hot Torsion of Ferritic Stainless
Steels Stabilized by Nb and Ti. 79 (2008) No. 6, 497504. DOI: 10.2374/SRI08SP014-79-2008-497
Moon, I.-J.; Jung, S.-M.: Reduction of Solid Iron Oxide by
Carbon. 79 (2008) No. 9, 667-670. DOI:
10.2374/SRI08SP005-79-2008-667
Moon, Y. H.; Jang, J. H.; Kwon, S.O.; Kim, B.J.: Investigation
on the Hydroforming Characteristics of Doublelayered Tubes. 79 (2008) No. 5, 371-376. DOI:
10.2374/SRI07SP088
Morales, R. D.; Torres-Alonso, E.; Palafox-Ramos, R.;
Ramirez-Lopez, P.: Oscillating Jet Flows in a Thin
Slab Mold and their Influence on Meniscus Stability.
79 (2008) No. 7, 553-563. DOI:
10.2374/SRI07SP129-79-2008-553
Motylenko, M.; Simek, D.; Rafaja, D.; Klemm, V.; Schreiber,
G.; Brethfeld, A.; Lehmann, G.: XRD Analysis of
Local Strain Fields in Pearlitic Steels – towards the
Fast Examination of Microstructure after Hot Rolling.
79 (2008) No. 10, 800-808. DOI:
10.2374/SRI08SP057
Mourao, M.B.; Takano, C.: Pellets Prepared with
Mechanically Activated Iron Ore. 79 (2008) No. 7,
543-547. DOI: 10.2374/SRI07SP105-79-2008-543
Mroz, G.; Reimche, W.; Bach, F.-W.; Duhm, R.; Bernard, M.;
Diebel, M.: High Strength 3D Non-Vacuum Electron
Beam Weld Joints - Setting of Gradient Material
Properties and Testing of Weld Quality. 79 (2008) No.
3, 225-231. DOI:0.2374/SRI07SP128-79-2008-225-232
Mrvar, P.; Medved, J.; Lamut, J.; Zdovc, M.: Influence of
SiO2 Addition on the Properties of Al2O3-CaO-CaF2
Slag. 79 (2008) No. 12, 908-912. DOI:
10.2374/SRI08SP044
Müller-Bollenhagen, C.; Zimmermann, M.; Christ, H.-J.;
Schröder, X.; Engel, B.; Große-Wöhrmann, A.;
Suttmeier, F.-T.: Modelling and Closed-loop Control
of Complex Tube Forming Based on an Optimized
Application of Martensite Formation in Austenitic
Stainless Steels. 79 (2008) No. 10, 745-752. DOI:
10.2374/SRI08SP082
N, O
Naderi, M.; Uthaisangsuk, V.; Prahl, U.; Bleck, W.: A Numerical and Experimental Investigation into Hot Stamping
of Boron Alloyed Heat Treated Steels. 79 (2008) No. 2,
77-84. DOI: 10.2374/SRI07SP094-79-2008-77-84
Nagata, K.; Seki, I.; Tanabe, J.: Deoxidization Equilibria with
Zirconium and Sulfur Partition for Molten Iron/CaOAl2O3-ZrO2 Slag at 1873K. 79 (2008) No. 11, 817820. DOI: 10.2374/SRI08SP036
Nakajima, K.; Wikström, J.; Jonsson, L.; Jönsson, P.:
Application of a Model for Liquid Inclusion
Separation at a Steel-Slag Interface for Laboratory and
Industrial Situations 79 (2008) No. 11, 826-834. DOI:
10.2374/SRI08SP006
Nicodemi, W.; Mapelli, C.; Riva, R.F.; Vedani, M.: Analysis
of the Nails from the Roman Legionary at Inchtuthil.
79 (2008) No. 7, 569-576. DOI:
10.2374/SRI07SP108-79-2008-569
Niznik, B.; Gawad, J.; Kuziak, R.; Pietrzyk, M.: Validation of
Multi-scale
Model
Describing
Microstructure
Evolution in Steels. 79 (2008) No. 8, 652-659. DOI:
10.2374/SRI08SP029-79-2008-652
Nzotta, M.; Björkvall, J.; Andersson, M.; Jönsson, P.: The
Effect of Ladle Treatment on Inclusion Composition
in Tool Steel Production. 79 (2008) No. 4, 261-270.
DOI: 10.2374/SRI07SP075-79-2008-261
Oden, M.; Knutsson, A.; Hedström, P.: Reverse Martensitic
Transformation and Resulting Microstructure in a
Cold Rolled Metastable Austenitic Stainless Steel.
79 (2008) No. 6, 433-439. DOI:
10.2374/SRI08SP039-79-2008-433
Ohler-Martins, K.; Senk, D.: Direct Reduction of Mixtures of
Manganese Ore and Iron Ore. 79 (2008) No. 11, 811816. DOI: 10.2374/SRI08SP103
Oliveira, de T.R.; Montheillet, F.: Evolution of Microstructure
and Texture during Hot Torsion of Ferritic Stainless
Steels Stabilized by Nb and Ti. 79 (2008) No. 6, 497504. DOI: 10.2374/SRI08SP014-79-2008-497
Olsson, C.-O.; Liljas, M.; Johansson, P.; Liu, H.-P.:
Development of a Lean Duplex Stainless Steel.
79 (2008) No. 6, 466-473. DOI:
10.2374/SRI08SP043-79-2008-466
Ostendorf, A.; Schimek, M.; Meier, O.; Haferkamp, H.:
Increasing Rigidity and Strength using Local Effects
of Bead-on-Plate Laser Welding Beam.
79 (2008) No. 3, 191-195. DOI:
10.2374/SRI07SP121-79-2008-191-195
P
Pack, A.; Toulouse, C.; Ender, A.; Petry, S.: Stable Oxygen
Isotopes for Tracing the Origin of Clogging in
Continuous Casting Submerged Entry Nozzles.
79 (2008) No. 2, 149-155. DOI:
10.2374/SRI07SP099-79-2008-149-155
Palacios, E.G.; Garcia-Ramos, E.; Romero-Serrano, A.;
Zeifert, B.; Flores-Sanchez, P.; Hallen-Lopez, M.:
Immobilization of Chromium in Slags using MgO and
Al2O3. 79 (2008) No. 5, 332-339. DOI:
10.2374/SRI07SP107-2008-333
Palafox-Ramos, R.; Torres-Alonso, E.; Morales, R. D.;
Ramirez-Lopez, P.: Oscillating Jet Flows in a Thin
Slab Mold and their Influence on Meniscus Stability.
79 (2008) No. 7, 553-563. DOI:
10.2374/SRI07SP129-79-2008-553
Palkowski, H.; Brück, A.: Local Use of Ageing Effects in
Multiphase Steels for Designing Local Properties of
Constructional Elements. 79 (2008) No. 3, 172-177.
DOI: 10.2374/SRI07SP118-79-2008-172-177
Palkowski, H.; Lange, G.: Production of Tailored High
Strength Hybrid Sandwich Structures. 79 (2008) No. 3,
178-185. DOI: 10.2374/SRI07SP119-79-2008-178-185
Pan, W.; Wu, K.; Xu, W.; Yin, X.; Zhang, J.; Wu, W.:
Research on Utilization Factor of Injected Pulverized
Coal into BF at Large PCI Rate. 79 (2008) No. 12,
904-907. DOI: 10.2374/SRI08SP053
Park, S.H.; Kang, H.G.; Huh, M.H.; Engler, O.: Effect of
Lubrication during Hot Rolling on the Evolution of
Through-Thickness Textures in 18%Cr Ferritic
Stainless Steel Sheet. 79 (2008) No. 6, 489-496. DOI:
10.2374/SRI08SP034-79-2008-489
Parteder, E.; Kainz, A.; Ilie, S.; Zeman, K.: From Slab Corner
Cracks to Edge-Defects in Hot Rolled Strip –
Experimental and Numerical Investigations. 79 (2008)
No. 11, 861-867. DOI: 10.2374/SRI08SP052
Parteder, E.; Pudar, M.; Kozeschnik, E.; Sormann, A.:
Numerical Analysis of the Nb(C,N) Precipitation
Kinetics in Microalloyed Steels. 79 (2008) No. 8,660664. DOI: 10.2374/SRI08SP018-79-2008-660
Paulsson, K.; Shen, F.; Sundelin, B.; Kapilashrami, E.; Wei,
G.; Chu, M.; Shen, Y.: Industrial Practice of BiPCI
Process of Pulverized Coal Injection for Blast Furnace
Ironmaking at SSAB. 79 (2008) No. 1, 11-16. DOI:
10.2374/SRI07SP053
Petry, S.; Toulouse, C.; Pack, A.; Ender, A.: Stable Oxygen
Isotopes for Tracing the Origin of Clogging in
Continuous Casting Submerged Entry Nozzles.
79 (2008) No. 2, 149-155. DOI:
10.2374/SRI07SP099-79-2008-149-155
Pfeifer, H.; Warzecha, M.; Jowsa, J.; Warzecha, P.: Numerical
and Experimental Investigations of Steel Mixing Time
in a 130-t Ladle. 79 (2008) No. 11, 852-860. DOI:
10.2374/SRI07SP136-79-2008-852
Pfeiler, C.; Thomas, B.G.; Wu, M.; Ludwig, A.; Kharicha, A.:
Solidification and Particle Entrapment during
Continuous Casting of Steel. 79 (2008) No. 8, 599607. DOI: 10.2374/SRI08SP024-79-2008-599
Pietrzyk, M.; Gawad, J.; Niznik, B.; Kuziak, R: Validation of
Multi-scale
Model
Describing
Microstructure
Evolution in Steels. 79 (2008) No. 8, 652-659. DOI:
10.2374/SRI08SP029-79-2008-652
Pirker, S.; Forstner, K.: Analytical and Numerical Approaches
in Studying Immersed Decarbonization in RH Plants.
79 (2008) No. 8, 591-599. DOI:
10.2374/SRI07SP096-79-2008-591
Plorin, T.; Bach, F.-W.; Bormann, D.: The Manufacture and
Characterisation of Reinforced Magnesium Foams.
79 (2008) No. 3, 185-190. DOI:
10.2374/SRI07SP120-79-2008-185-190
Plura, J.; Schindler, I.; Kawalla, R.; Kubina, T.; Rusz, S.;
Hadasik, E.; Jurko, V.: Model of Mean Flow Stress of
Ti-IF Steel Considering Effect of Phase Transformations. 79 (2008) No. 10, 758-764. DOI:
10.2374/SRI08SP002
Pohl, M.; Swaminathan, S.; Koll, T.; Wieck, A.D.; Spiegel,
M.: Hot Dip Galvanizing Simulation of Interstitial
Free Steel by Liquid Zinc Spin Coater: Influence of
Dew Point on Surface Chemistry and Wettability.
79 (2008) No. 1, 66-72. DOI: 10.2374/SRI07SP084
Ponge, D.; Herrera, C.; Raabe, D.: Characterization of the
Microstructure,
Crystallographic
Texture
and
Segregation of an As-cast Duplex Stainless Steel Slab.
79 (2008) No. 6, 482-488. DOI:
10.2374/SRI08SP014-79-2008-482
Prahl, U.; Naderi, M.; Uthaisangsuk, V.; Bleck, W.: A
Numerical and Experimental Investigation into Hot
Stamping of Boron Alloyed Heat Treated Steels.
79 (2008) No. 2, 77-84. DOI:
10.2374/SRI07SP094-79-2008-77-84
Prahl, U.; Suwanpinij, P.; Togobytska, N.; Keul, C.; Weiss,
W.; Hömberg, D.: Phase Transformation Modelling
and Parameter Identification from Dilatometric
Investigations. 79 (2008) No. 10, 793-799, DOI:
10.2374/SRI08SP060
Prakash, A.; Hochrainer, T.; Reisacher, E.; Riedel, H.:
Twinning Models in Self-Consistent Texture
Simulations of TWIP Steels. 79 (2008) No. 8, 645652. DOI: 10.2374/SRI08SP030-79-2008-645
Presslinger, H.; Ilie, S.; Fluch, J.; Reisinger, P.: Assessment of
Segregation in Hot Tear Cracks. 79 (2008) No. 12,
924-930. DOI: 10.2374/SRI08SP095
Prodanovic, V.; Jondhale, K.V.; Wells, M.A.; Militzer, M.:
Heat Transfer during Multiple Jet Impingement on the
Top Surface of Hot Rolled Steel Strip. 79 (2008) No.
12, 938-946. DOI: 10.2374/SRI08SP055
Pudar, M.; Kozeschnik, E.; Sormann, A.; Parteder, E.:
Numerical Analysis of the Nb(C,N) Precipitation
Kinetics in Microalloyed Steels. 79 (2008) No. 8, 660664. DOI: 10.2374/SRI08SP018-79-2008-660
Pyzalla, A.R.; Silva, P.A.; Weber, S.; Karlsohn, M.; Theisen,
W.; Reimers, W.: Interface Characterization of
Abrasion Resistant Coatings Co-Extruded on Steel
Substrates. 79 (2008) No. 11, 885-894. DOI:
10.2374/SRI08SP049
Pyzalla, A.R.; Agudo, L.; Jank, N.; Wagner, J.; Weber, S.;
Schmaranzer, C.; Arenholz, E.; Bruckner, J.; Hackl,
H.: Investigation of Microstructure and Mechanical
Properties of Steel-Aluminium Joints Produced by
Metal Arc Joining. 79 (2008) No. 7, 530-535. DOI:
10.2374/SRI08SP022-79-2008-530
Q, R
Raabe, D.; Degenhardt, R.; Sellger, R.; Klos, W.; Sachtleber,
M.; Ernenputsch, L.: Advances in the Optimization of
Thin Strip Cast Austenitic 304 Stainless Steel.
79 (2008) No. 6, 440-444. DOI:
10.2374/SRI015-79-2008-440
Raabe, D.; Herrera, C.; Ponge, D.: Characterization of the
Microstructure,
Crystallographic
Texture
and
Segregation of an As-cast Duplex Stainless Steel Slab.
79 (2008) No. 6, 482-488. DOI:
10.2374/SRI08SP014-79-2008-482
Rablbauer, R.; Frommeyer, G.: High Temperature Materials
Based on the Intermetallic Compound NiAl
Reinforced by Refractory Metals for Advanced Energy
Conversion Technologies. 79 (2008) No. 7, 507-512.
DOI: 10.2374/SRI08SP101-79-2008-507
Rafaja, D.; Simek, D.; Motylenko, M.; Klemm, V.; Schreiber,
G.; Brethfeld, A.; Lehmann, G.: XRD Analysis of
Local Strain Fields in Pearlitic Steels – towards the
Fast Examination of Microstructure after Hot Rolling.
79 (2008) No. 10, 800-808. DOI:
10.2374/SRI08SP057
Ramirez-Lopez, P.; Torres-Alonso, E.; Morales, R. D.;
Palafox-Ramos, R.: Oscillating Jet Flows in a Thin
Slab Mold and their Influence on Meniscus Stability.
79 (2008) No. 7, 553-563. DOI:
10.2374/SRI07SP129-79-2008-553
Rancel, L.; Gomez, M.; Medina, S.F.: Influence of
Microalloying Elements (Nb, V, Ti) on Yield Strength
in Bainitic Steels. 79 (2008) No. 12, 947-953. DOI:
10.2374/SRI08SP064
Recker, D.; Franzke, M.; Hirt, G.: Development of a Process
Model for Online-Optimization of Open Die Forging
of Large Workpieces. 79 (2008) No. 10, 753-757.
DOI: 10.2374/SRI08SP067
Reimche, W.; Bach, F.-W.; Mroz, G.; Duhm, R.; Bernard,
M.; Diebel, M.: High Strength 3D Non-Vacuum
Electron Beam Weld Joints-Setting of Gradient
Material Properties and Testing of Weld Quality. 79
(2008) No. 3, 225-231. DOI: 10.2374/SRI07SP12879-2008-225-232
Reimers, W.; Silva, P.A.; Weber, S.; Karlsohn, M.; Theisen,
W.; Pyzalla, A.R.: Interface Characterization of
Abrasion Resistant Coatings Co-Extruded on Steel
Substrates. 79 (2008) No. 11, 885-894. DOI:
10.2374/SRI08SP049
Reisacher, E.; Prakash, A.; Hochrainer, T.; Riedel, H.:
Twinning Models in Self-Consistent Texture
Simulations of TWIP Steels. 79 (2008) No. 8, 645652. DOI: 10.2374/SRI08SP030-79-2008-645
Reisinger, P.; Presslinger, H.; Ilie, S.; Fluch, J.: Assessment of
Segregation in Hot Tear Cracks. 79 (2008) No. 12,
924-930. DOI: 10.2374/SRI08SP095
Rekersdrees, T.; Wesling, V.; Schram, A.; Wiche, H.: Process
Simulation of the Heating Phase during Conductive
High-Frequency Welding of Low-Alloy Sheet-Steel
Blanks. 79 (2008) No. 3, 202-207. DOI:
10.2374/SRI07SP124-79-2008-202-207
Ren, R; . Fang, J.; Li, C.; Wang, X.: Raw Material Strength in
a Blast Furnace at Operating Temperature. 79 (2008)
No. 1, 5-10. DOI: 10.2374/SRI07SP044
Ren, X.-J.; Yu, H.-L.; Liu, X.-H.: Behaviour of Longitudinal
Cracks on Slab Surfaces in V-H Rolling Processes .
79 (2008) No. 7, 536-542. DOI:
10.2374/SRI07SP066-79-2008-536
Ren, Z.; Yu, Z.; Lei, Z.; Li, Q.; Deng, K.: Physical Simulation
of Nozzle Electromagnetic Brake in Twin-Roll Strip
Casting. 79 (2008) No. 11, 839-842. DOI:
10.2374/SRI08SP037
Riedel, H.; Prakash, A.; Hochrainer, T.; Reisacher, E.:
Twinning Models in Self-Consistent Texture
Simulations of TWIP Steels. 79 (2008) No. 8, 645652. DOI: 10.2374/SRI08SP030-79-2008-645
Riedner, S.; Gavriljuk, V. G.; Tyshchenko, A.; Bliznuk, V.V.;
Yakovleva, I.L.; Berns, H.:Cold Work Hardening of
High-Strength Austenitic Steels. 79 (2008) No. 6,
413-422. DOI: 10.2374/SRI08SP051-79-2008-413
Riscifuli, S.; Kaufmann, H.; Sonsino, C.M.; Demofonti, G.:
High-Strength Steels in Welded State for LightWeight Constructions under High and Variable Stress
Peaks. 79 (2008) No. 5, 382-389. DOI:
10.2374/SRI06SP151-79-2008-382
Riva, R.F.; Mapelli, C.; Nicodemi, W.; Vedani, M.: Analysis
of the Nails from the Roman Legionary at Inchtuthil.
79 (2008) No. 7, 569-576. DOI:
10.2374/SRI07SP108-79-2008-569
Rockenschraub, K.; Javurek, M.; Barna, M.; Gittler, P.;
Lechner, M.: Flow Modelling in Continuous Casting
of Round Bloom Strands with Electromagnetic
Stirring. 79 (2008) No. 8, 617-626. DOI:
10.2374/SRI08SP027-79-2008-617
Roffel, B.; Kattenbelt, C.; Spelbos, E.; Mink, P.: Detection of
Slopping in Basic Oxygen Steelmaking using a
Camera Viewing the Converter Mouth. 79 (2008) No.
11, 821-825. DOI: 10.2374/SRI08SP065
Romero-Serrano, A.; Garcia-Ramos, E.; Zeifert, B.; FloresSanchez, P.; Hallen-Lopez, M.; Palacios, E.G.:
Immobilization of Chromium in Slags using MgO and
Al2O3. 79 (2008) No. 5, 332-339. DOI:
10.2374/SRI07SP107-2008-333
Rusz, S.; Schindler, I.; Kawalla, R.; Plura, J.; Kubina, T.;
Hadasik, E.; Jurko, V.: Model of Mean Flow Stress of
Ti-IF Steel Considering Effect of Phase Transformations. 79 (2008) No. 10, 758-764. DOI:
10.2374/SRI08SP002
S
Sachtleber, M.; Raabe, D.; Degenhardt, R.; Sellger, R.; Klos,
W.; Ernenputsch, L.: Advances in the Optimization of
Thin Strip Cast Austenitic 304 Stainless Steel.
79 (2008) No. 6, 440-444. DOI:
10.2374/SRI015-79-2008-440
Saxen, H.; Helle, M.: Data-driven Analysis of Sulfur Flows
and Behaviour in the Blast Furnace.
79 (2008) No. 9, 671-677. DOI:
10.2374/SRI08SP035-79-2008-671
Schaffnit, P.; Böttger, B.; Apel, M.; Eiken, J.; Steinbach, I.:
Phase-Field Simulation of Solidification and SolidState Transformations in Multicomponent Steels
79 (2008) No. 8, 608-616. DOI:
10.2374/SRI08SP021-79-2008-608
Schaper, M.; Cwiekala, T.; Brosius, A.; Tekkaya, A.E.;
Grydin, O.; Bach, F.-W.; Barthel, C.; Svendsen, B.:
Efficient Modelling and Simulation of Process Chains
in Sheet Metal Forming and Processing. 79 (2008) No.
10, 731-737 DOI: 10.2374/SRI08SP058
Schimek, M.; Meier, O.; Ostendorf, A.; Haferkamp, H.:
Increasing Rigidity and Strength using Local Effects of
Bead-on-Plate Laser Welding Beam. 79 (2008) No. 3,
191-195. DOI: 10.2374/SRI07SP121-79-2008-191-195
Schindler, I.; Kawalla, R.; Plura, J.; Kubina, T.; Rusz, S.;
Hadasik, E.; Jurko, V.: Model of Mean Flow Stress of
Ti-IF Steel Considering Effect of Phase
Transformations. 79 (2008) No. 10, 758-764. DOI:
10.2374/SRI08SP002
Schmaranzer, C.; Agudo, L.; Jank, N.; Wagner, J.; Weber, S.;
Arenholz, E.; Bruckner, J.; Hackl, H.; Pyzalla, A.R.:
Investigation of Microstructure and Mechanical
Properties of Steel-Aluminium Joints Produced by
Metal Arc Joining. 79 (2008) No. 7, 530-535, DOI:
10.2374/SRI08SP022-79-2008-530
Schneidt, A.; Mahnken, R.: Macromodelling of Transformation Induced Plasticity combined with Viscoplasticity
for Low-Alloy Steels. 79 (2008) No. 2, 116-123. DOI:
10.2374/SRI07SP137-79-2008-116-123
Scholtes, B.; Grüning, A.; Krauß, M.: Isothermal Fatigue of
Tool Steel AISI H11. 79 (2008) No. 2, 111-115. DOI:
10.2374/SRI07SP110-79-2008-111-115
Schoof, U.; Maikranz-Valentin, M.; Weidig, U.; Becker, H.;
Steinhoff, K.: Components with Optimised Properties
due to Advanced Thermo-mechanical Process
Strategies in Hot Sheet Metal Forming. 79 (2008) No.
2, 92-97. DOI: 10.2374/SRI07SP115-79-2008-92-97
Schram, A.; Masendorf, R.; Medhurst, T.; Wiche, H.:
Manufacturing and Fatigue Strength of Brazed,
Locally Hardened Structures. 79 (2008) No. 3, 219224. DOI: 10.2374/SRI07SP127-79-2008-219-224
Schram, A.; Wesling, V.; Rekersdrees, T.; Wiche, H.: Process
Simulation of the Heating Phase during Conductive
High-Frequency Welding of Low-Alloy Sheet-Steel
Blanks. 79 (2008) No. 3, 202-207. DOI:
10.2374/SRI07SP124-79-2008-202-207
Schreiber, G.; Simek, D.; Rafaja, D.; Motylenko, M.; Klemm,
V.; Brethfeld, A.; Lehmann, G.: XRD Analysis of
Local Strain Fields in Pearlitic Steels – towards the
Fast Examination of Microstructure after Hot Rolling.
79 (2008) No. 10, 800-808. DOI:
10.2374/SRI08SP057
Schröder, X.; Müller-Bollenhagen, C. Zimmermann,
M.;
Christ, H.-J.; Engel, B.; Große-Wöhrmann, A.;
Suttmeier, F.-T.: Modelling and Closed-loop Control
of Complex Tube Forming Based on an Optimized
Application of Martensite Formation in Austenitic
Stainless Steels. 79 (2008) No. 10, 745-752. DOI:
10.2374/SRI08SP082
Schützenhöfer, W.; Kharicha, A.; Ludwig, A.; Tanzer, R.; Wu,
M.: On the Importance of Electric Currents Flowing
directly into the Mould during an ESR Process.
79 (2008) No. 8, 632-636. DOI:
10.2374/SRI08SP016-79-2008-632
Schützenhöfer, W.; Wu, M.; Könözsy, L.; Ludwig, A.; Tanzer,
R.: On the Formation of Macrosegregations in Steel
Ingot Castings. 79 (2008) No. 8, 637-644. DOI:
10.2374/SRI08SP020-79-2008-637
Schwich, V.; Siodlak, D.; Lotter, U.; Kawalla, R.: Modelling
of the Mechanical Properties of Low Alloyed
Multiphase Steels with Retained Austenite Taking into
Account Strain-Induced Transformation. 79 (2008)
No. 10, 776-783. DOI: 10.2374/SRI08SP033
Seetharaman, S.; Matsushita, T.; Umezawa, Y.: Rupture
Strength of some Mould Flux Slag Films relevant to
Swedish Continuous Casting Practice. 79 (2008) No.
11, 835-838. DOI: 10.2374/SRI08SP041
Segers, D.; Van Caenegem, N.; Verbeken, K.; Houbaert, Y.:
Improvement of the Shape Memory Effect in Fe-based
Alloys by Training. 79 (2008) No. 4, 314-320. DOI:
10.2374/SRI07SP130-79-2008-314
Seki, I.; Tanabe, J.; Nagata, K.: Deoxidization Equilibria with
Zirconium and Sulfur Partition for Molten Iron/CaOAl2O3-ZrO2 Slag at 1873K. 79 (2008) No. 11, 817820. DOI: 10.2374/SRI08SP036
Sellger, R.; Raabe, D.; Degenhardt, R.; Klos, W.; Sachtleber,
M.; Ernenputsch, L.: Advances in the Optimization of
Thin Strip Cast Austenitic 304 Stainless Steel.
79 (2008) No. 6, 440-444. DOI:
10.2374/SRI015-79-2008-440
Sellmann, M.; Karjalainen, L.P.; Taulavuori, T.; Kyröläinen,
A.: Some Strengthening Methods for Austenitic
Stainless Steels. 79 (2008) No. 6, 404-412. DOI:
10.2374/SRI08SP040-79-2008-404
Selvarasu, N.K.C.; Gu, M.; Zhang, M.C.; Zhao, Y.; Zhou,
C.Q.: Numerical Analysis of Pulverized Coal
Combustion inside Tuyere and Raceway. 79 (2008)
No. 1, 17-24. DOI: 10.2374/SRI07SP050
Senk, D.; Ohler-Martins, K.: Direct Reduction of Mixtures of
Manganese Ore and Iron Ore. 79 (2008) No. 11, 811816. DOI: 10.2374/SRI08SP103
Shen, F.; Sundelin, B.; Paulsson, K.; Kapilashrami, E.; Wei,
G.; Chu, M.; Shen, Y.: Industrial Practice of BiPCI
Process of Pulverized Coal Injection for Blast Furnace
Ironmaking at SSAB. 79 (2008) No. 1, 11-16. DOI:
10.2374/SRI07SP053
Shen, H.; Liu, R.; Wei, J.; Li, J.; Liu, B.: Numerical
Simulation on Transient Flow Patterns of Upper Rolls
in Continuous Slab Casting Moulds. 79 (2008) No. 8,
626-631. DOI: 10.2374/SRI08SP017-79-2008-626
Shen, Y.; Shen, F.; Sundelin, B.; Paulsson, K.; Kapilashrami,
E.; Wei, G.; Chu, M.: Industrial Practice of BiPCI
Process of Pulverized Coal Injection for Blast Furnace
Ironmaking at SSAB. 79 (2008) No. 1, 11-16. DOI:
10.2374/SRI07SP053
Shibata, H.; Kitamura, S.; Maruoka, N.: Kinetic Model of Hot
Metal Dephosphorization by Liquid and Solid
Coexisting Slags. 79 (2008) No. 8, 586-590. DOI:
10.2374/SRI08SP003-79-2008-586
Sichen, D.; Thunman, M.: Origins of Non-metallic Inclusions
and their Chemical Development during Ladle
Treatment. 79 (2008) No. 2, 124-132. DOI:
10.2374/SRI07SP081-79-2008-124-132
Sidhu, K. B.; Behrens, B.-A.; Hagen, T.; Mielke, J.:
Production of Structure Components with Selective
Properties by means of Action Media based Cold
Forming. 79 (2008) No. 3, 233-239. DOI:
10.2374/SRI07SP122-79-2008-233-239
Sietsma, J.; Mertens, A.; Jacques, P.J.; Delannay, F.: Relative
Influences of Aluminium and Silicon on the Kinetics
of Bainite Formation from Intercritical Austenite. 79
(2008) No. 12, 954-959. DOI: 10.2374/SRI08SP068
Silva, P.A.; Weber, S.; Karlsohn, M.; Theisen, W.; Reimers,
W.; Pyzalla, A.R.: Interface Characterization of
Abrasion Resistant Coatings Co-Extruded on Steel
Substrates. 79 (2008) No. 11, 885-894. DOI:
10.2374/SRI08SP049
Simek, D.; Rafaja, D.; Motylenko, M.; Klemm, V.; Schreiber,
G.; Brethfeld, A.; Lehmann, G.: XRD Analysis of
Local Strain Fields in Pearlitic Steels – towards the
Fast Examination of Microstructure after Hot Rolling.
79 (2008) No. 10, 800-808. DOI:
10.2374/SRI08SP057
Siodlak, D.; Lotter, U.; Kawalla, R.; Schwich, V.: Modelling
of the Mechanical Properties of Low Alloyed
Multiphase Steels with Retained Austenite Taking into
Steinhoff, K.; Maier, H.J.; Tschumak, S.; Weidig, U.:
Functional Gradation of Low Alloy Steel by
Differentially Controlled Phase Transformation.
79 (2008) No. 2, 105-110. DOI:
10.2374/SRI07SP109-79-2008-105-110
Steinhoff, K.; Maikranz-Valentin, M.; Weidig, U.; Schoof, U.;
Becker, H.: Components with Optimised Properties
due to Advanced Thermo-mechanical Process
Strategies in Hot Sheet Metal Forming. 79 (2008) No.
2, 92-97. DOI: 10.2374/SRI07SP115-79-2008-92-97
Sundelin, B.; Shen, F.; Paulsson, K.; Kapilashrami, E.; Wei,
G.; Chu, M.; Shen, Y.: Industrial Practice of BiPCI
Process of Pulverized Coal Injection for Blast Furnace
Ironmaking at SSAB. 79 (2008) No. 1, 11-16. DOI:
10.2374/SRI07SP053
Suttmeier, F.-T.; Müller-Bollenhagen, C.; Zimmermann, M.
Christ, H.-J.; Schröder, X.; Engel, B.; GroßeWöhrmann, A.: Modelling and Closed-loop Control of
Complex Tube Forming Based on an Optimized
Application of Martensite Formation in Austenitic
Stainless Steels. 79 (2008) No. 10, 745-752. DOI:
10.2374/SRI08SP082
Suwanpinij, P.; Togobytska, N.; Keul, C.; Weiss, W.; Prahl,
U.; Hömberg, D.: Phase Transformation Modelling
and Parameter Identification from Dilatometric
Investigations. 79 (2008) No. 10, 793-799. dOI:
10.2374/SRI08SP060
Svendsen, B.; Cwiekala, T.; Brosius, A.; Tekkaya, A.E.;
Grydin, O.; Schaper, M.; Bach, F.-W.; Barthel, C.:
Efficient Modelling and Simulation of Process Chains
in Sheet Metal Forming and Processing. 79 (2008) No.
10, 731-737. DOI: 10.2374/SRI08SP058
Swaminathan, S.; Koll, T.; Pohl, M.; Wieck, A.D.; Spiegel,
M.: Hot Dip Galvanizing Simulation of Interstitial
Free Steel by Liquid Zinc Spin Coater: Influence of
Dew Point on Surface Chemistry and Wettability. 79
(2008) No. 1, 66-72. DOI: 10.2374/SRI07SP084
Account Strain-Induced Transformation. 79 (2008)
No. 10, 776-783. DOI: 10.2374/SRI08SP033
Solhed, H.; Jonsson, L.; Jönsson, P.: Modelling of the
Steel/Slag Interface in a Continuous Casting Tundish.
79 (2008) No. 5, 348-357. DOI:
10.2374/SRI07SP111-79-2008-348
Song, B.; Yang, Z.; Wang, F. ; Wang, S.: Intragranular Ferrite
Formation Mechanism and Mechanical Properties of
Non-quenched-and-tempered Medium Carbon Steels.
79 (2008) No. 5, 390-395. DOI:
10.2374/SRI07SP090-79-2008-390
Sonsino, C.M.; Kaufmann, H.; Demofonti, G.; Riscifuli, S.:
High-Strength Steels in Welded State for LightWeight Constructions under High and Variable Stress
Peaks. 79 (2008) No. 5, 382-389. DOI:
10.2374/SRI06SP151-79-2008-382
Sormann, A.; Pudar, M.; Kozeschnik, E.; Parteder, E.:
Numerical Analysis of the Nb(C,N) Precipitation
Kinetics in Microalloyed Steels. 79 (2008) No. 8, 660664. DOI: 10.2374/SRI08SP018-79-2008-660
Spelbos, E.; Kattenbelt, C.; Mink, P.; Roffel, B.: Detection of
Slopping in Basic Oxygen Steelmaking using a
Camera Viewing the Converter Mouth. 79 (2008) No.
11, 821-825. DOI: 10.2374/SRI08SP065
Spiegel, M.; Swaminathan, S.; Koll, T.; Pohl, M.; Wieck,
A.D.: Hot Dip Galvanizing Simulation of Interstitial
Free Steel by Liquid Zinc Spin Coater: Influence of
Dew Point on Surface Chemistry and Wettability. 79
(2008) No. 1, 66-72. DOI: 10.2374/SRI07SP084
Steinbach, I.; Böttger, B.; Apel, M.; Eiken, J.; Schaffnit, P.:
Phase-Field Simulation of Solidification and SolidState Transformations in Multicomponent Steels.
79 (2008) No. 8, 608-616. DOI:
10.2374/SRI08SP021-79-2008-608
Steinhoff, K.; Weidig, U.; Hübner, K.: Bulk Steel Products
with Functionally Graded Properties Produced by
Differential Thermo-mechanical Processing. 79 (2008)
No. 1, 59-65. DOI: 10.2374/SRI07SP059
T
Tague, C. B.; Mataya, M.C.; Matlock, D.K.; Krauss, G.: Sheet
Formability and Performance of Metastable Austenitic
Stainless Steels. 79 (2008) No. 6, 423-432. DOI:
10.2374/SRI08SP042-79-2008-423
Takagi, S.; Kholmatov, S.; Jönsson, P.; Jonsson, L.; Yokoya,
S.: Influence of Aspect Ratio on Fluid Flow and Heat
Transfer in Mould when Using Swirl Flow during
Casting. 79 (2008) No. 9, 698-707. DOI:
10.2374/SRI07SP116-79-2008-698
Takagi, S.; Kholmatov, S.; Jonsson, L.; Jönsson, P.; Yokoya,
S.: Effect of Nozzle Angle on Flow Field and
Temperature Distribution in a Billet Mould when
using Swirl Flow. 79 (2008) No. 1, 31-39. DOI:
10.2374/SRI07SP023
Takano, C.; Mourao, M.B.: Pellets Prepared with Mechanically Activated Iron Ore. 79 (2008) No. 7, 543-547. DOI:
10.2374/SRI07SP105-79-2008-543
Tanabe, J.; Seki, I.; Nagata, K.: Deoxidization Equilibria with
Zirconium and Sulfur Partition for Molten Iron/CaOAl2O3-ZrO2 Slag at 1873K. 79 (2008) No. 11, 817820. DOI: 10.2374/SRI08SP036
Tanzer, R.; Kharicha, A.; Schützenhöfer, W.; Ludwig, A.; Wu,
M.: On the Importance of Electric Currents Flowing
directly into the Mould during an ESR Process.
79 (2008) No. 8, 632-636. DOI:
10.2374/SRI08SP016-79-2008-632
Tanzer, R.; Wu, M.; Könözsy, L.; Ludwig, A.; Schützenhöfer,
W.: On the Formation of Macrosegregations in Steel
Ingot Castings. 79 (2008) No. 8, 637-644. DOI:
10.2374/SRI08SP020-79-2008-637
Taulavuori, T.; Karjalainen, L.P.; Sellmann, M.; Kyröläinen,
A.: Some Strengthening Methods for Austenitic
Stainless Steels. 79 (2008) No. 6, 404-412. DOI:
10.2374/SRI08SP040-79-2008-404
Tekkaya, A.E.; Cwiekala, T.; Brosius, A.; Grydin, O.;
Schaper, M.; Bach, F.-W.; Barthel, C.; Svendsen, B.:
Efficient Modelling and Simulation of Process Chains
in Sheet Metal Forming and Processing. 79 (2008) No.
10, 731-737. DOI: 10.2374/SRI08SP058
Theisen, W.; Silva, P.A.; Weber, S.; Karlsohn, M.; Reimers,
W.; Pyzalla, A.R.: Interface Characterization of
Abrasion Resistant Coatings Co-Extruded on Steel
Substrates, 79 (2008) No. 11, 885-894. DOI:
10.2374/SRI08SP049
Thomas, B.G.; Pfeiler, C.; Wu, M.; Ludwig, A.; Kharicha, A.:
Solidification and Particle Entrapment during
Continuous Casting of Steel. 79 (2008) No. 8, 599607. DOI: 10.2374/SRI08SP024-79-2008-599
Thunman, M.; Sichen, D.: Origins of Non-metallic Inclusions
and their Chemical Development during Ladle
Treatment. 79 (2008) No. 2, 124-132. DOI:
10.2374/SRI07SP081-79-2008-124-132
Togobytska, N.; Suwanpinij, P.; Keul, C.; Weiss, W; Prahl,
U.; Hömberg, D.: Phase Transformation Modelling
and Parameter Identification from Dilatometric
Investigations. 79 (2008) No. 10, 793-799. DOI:
10.2374/SRI08SP060
Torres-Alonso, E.; Morales, R. D.; Palafox-Ramos, R.;
Ramirez-Lopez, P.: Oscillating Jet Flows in a Thin
Slab Mold and their Influence on Meniscus Stability.
79 (2008) No. 7, 553-563. DOI:
10.2374/SRI07SP129-79-2008-553
Toulouse, C.; Pack, A.; Ender, A.; Petry, S.: Stable Oxygen
Isotopes for Tracing the Origin of Clogging in
Continuous Casting Submerged Entry Nozzles. 79
(2008) No. 2, 149-155. DOI: 10.2374/SRI07SP09979-2008-149-155
Tschumak, S.; Maier, H.J.; Weidig, U.; Steinhoff, K.:
Functional Gradation of Low Alloy Steel by
Differentially Controlled Phase Transformation.
79 (2008) No. 2, 105-110. DOI:
10.2374/SRI07SP109-79-2008-105-110
Tyshchenko, A.; Gavriljuk, V. G.; Bliznuk, V.V.; Yakovleva,
I.L.; Riedner, S.; Berns, H.: Cold Work Hardening of
High-Strength Austenitic Steels. 79 (2008) No. 6, 413422. DOI: 10.2374/SRI08SP051-79-2008-413
U, V
Verbeken, K.; Bouquerel, J.; Krizan, D.; Barbe, L.; Verleysen,
P.; Houbaert, Y.: Evaluation of the Static Stress-Strain
Behaviour of Phosphorus Alloyed and Titanium
Micro-alloyed TRIP Steels. 79 (2008) No. 10, 784792. DOI: 10.2374/SRI08SP019
Verbeken, K; Van Caenegem, N.; Segers, D.; Houbaert, Y.:
Improvement of the Shape Memory Effect in Fe-based
Alloys by Training. 79 (2008) No. 4, 314-320. DOI:
10.2374/SRI07SP130-79-2008-314
Verleysen, P.; Bouquerel, J.; Verbeken, K.; Krizan, D.:Barbe,
L.; Houbaert, Y.: Evaluation of the Static Stress-Strain
Behaviour of Phosphorus Alloyed and Titanium
Micro-alloyed TRIP Steels. 79 (2008) No. 10, 784792. DOI: 10.2374/SRI08SP019
Vode, F.; Jaklic, A.; Kokalj, T.; Matko, D.: A Furnace Control
System for Tracing Reference Reheating Curves.
79 (2008) No. 5, 364-370. DOI:
10.2374/SRI07SP056-79-2008-364
Voges-Schwieger, K.; Behrens, B.-A.; Hübner, S.; Knigge, J.;
Weilandt, K.: Local Strain-Hardening in Sheet Metal
and Forging Components. 79 (2008) No. 3, 165-171.
DOI: 10.2374/SRI07SP117-79-2008-165-172
Umezawa, Y.; Matsushita, T.; Seetharaman, S.: Rupture
Strength of some Mould Flux Slag Films relevant to
Swedish Continuous Casting Practice. 79 (2008) No.
11, 835-838. DOI: 10.2374/SRI08SP041
Uthaisangsuk, V.; Naderi, M.; Prahl, U.; Bleck, W.: A
Numerical and Experimental Investigation into Hot
Stamping of Boron Alloyed Heat Treated Steels.
79 (2008) No. 2, 77-84. DOI:
10.2374/SRI07SP094-79-2008-77-84
v. Breitenbach, G.; Groche, P.: Roll Forming Strategies for
Welded Tubes. 79 (2008) No. 1, 40-46. DOI:
10.2374/SRI07048
Van Caenegem, N.; Verbeken, K.; Segers, D.; Houbaert, Y.:
Improvement of the Shape Memory Effect in Fe-based
Alloys by Training. 79 (2008) No. 4, 314-320. DOI:
10.2374/SRI07SP130-79-2008-314
Van Caenegem, N.; Milititsky, M.; De Cooman, B.C.:
Structural and Magnetic Transformations in the Fe-Mn
Binary System. 79 (2008) No. 2, 156-159. DOI:
10.2374/SRI07SP062-79-2008-156-159
Vedani, M.; Mapelli, C.; Nicodemi, W.; Riva, R.F.: Analysis
of the Nails from the Roman Legionary at Inchtuthil.
79
(2008)
No.
7,
569-576.
DOI:
10.2374/SRI07SP108-79-2008-569
W
Wagner, J.; Agudo, L.; Jank, N.; Weber, S.; Schmaranzer, C.;
Arenholz, E.; Bruckner, J.; Hackl, H.; Pyzalla, A.R.:
Investigation of Microstructure and Mechanical
Properties of Steel-Aluminium Joints Produced by
Metal Arc Joining, 79 (2008) No. 7, 530-535. DOI:
10.2374/SRI08SP022-79-2008-530
Wang, F.; Yang, Z.; Wang, S.; Song, B.: Intragranular Ferrite
Formation Mechanism and Mechanical Properties of
Non-quenched-and-tempered Medium Carbon Steels.
79 (2008) No. 5, 390-395. DOI:
10.2374/SRI07SP090-79-2008-390
Wang, F.; Wang, H.; Xu, Z.; Jin, L.: Composition Control of
CaO-MgO-Al2O3-SiO2 Inclusions in Tire Cord Steel
- a thermodynamic Analysis. 79 (2008) No. 1, 25-30.
DOI: 10.2374/SRI07SP038
Wang, H.; Wang, F.; Xu, Z.; Jin, L.: Composition Control of
CaO-MgO-Al2O3-SiO2 Inclusions in Tire Cord Steel
- a thermodynamic Analysis. 79 (2008) No. 1, 25-30.
DOI: 10.2374/SRI07SP038
Wang, K.; Wang, Q.; He, J.; Liu, C.: Influence of Vanadium
on Grain Growth of Deformation Induced Ferrite in
Low Carbon Steel during Continuous Cooling Process.
79 (2008) No. 9, 712-716. DOI:
10.2374/SRI07SP093-79-2008-712
Wang, L.; Fu, H.; Kuang, J.: Microstructure, Mechanical
Properties, and Abrasive Wear Behaviour of Si-MnCr-B Cast Steel as a Function of Carbon
Concentration. 79 (2008) No.9, 721-718. DOI:
10.2374/SRI07SP112-79-2008-721
Wang, N.; Xie, X.; Zou, Z.; Guo, L.; Xu, W.; Zhou, Y.:
Analysis of Material and Energy Consumption of
Corex C3000. 79 (2008) No. 7, 547-552. DOI:
10.2374/SRI08NT007-79-2008-547
Wang, Q. ; Wang, K.; He, J.; Liu, C.: Influence of Vanadium
on Grain Growth of Deformation Induced Ferrite in
Low Carbon Steel during Continuous Cooling Process.
79 (2008) No. 9, 712-716. DOI:
10.2374/SRI07SP093-79-2008-712
Wang, S.; Yang, Z.; Wang, F.; Song, B.: Intragranular Ferrite
Formation Mechanism and Mechanical Properties of
Non-quenched-and-tempered Medium Carbon Steels.
79 (2008) No. 5, 390-395. DOI:
10.2374/SRI07SP090-79-2008-390
Wang, W.; Cramb, A.W.: The Effect of the Transition Metal
Oxide Content of a Mold Flux on the Radiation Heat
Transfer Rates. 79 (2008) No. 4, 271-277, DOI:
10.2374/SRI07SP079-79-2008-271
Wang, X; Zang, X.; Ma, Y.; Yao, M.; Zhang, L.: Investigation
of Friction Force between Mould and Strand Shell
under Sinusoidal and Non-sinusoidal Oscillation in
Continuous Slab Casting. 79 (2008) No. 7, 564-568.
DOI: 10.2374/SRI07SP098-79-2008-564
Wang, X.; Fang, J.; Li, C.; Ren, R.: Raw Material Strength in
a Blast Furnace at Operating Temperature. 79 (2008)
No. 1, 5-10. DOI: 10.2374/SRI07SP044
Wang, X; Li, J.; Chen, W.; Liu, Q.: Effect of Ultrasonic
Treatment on the Solidification Structure of High
Carbon Steel Containing Rare Earth Elements.
79 (2008) No. 5, 358-363. DOI:
10.2374/SRI07SP086-79-2008-358
Warzecha, M.; Jowsa, J.; Warzecha, P.; Pfeifer, H.: Numerical
and Experimental Investigations of Steel Mixing Time
in a 130-t Ladle. 79 (2008) No. 11, 852-860. DOI:
10.2374/SRI07SP136-79-2008-852
Warzecha, P.; Warzecha, M.; Jowsa, J.; Pfeifer, H.: Numerical
and Experimental Investigations of Steel Mixing Time
in a 130-t Ladle. 79 (2008) No. 11, 852-860. DOI:
10.2374/SRI07SP136-79-2008-852
Weber, S.; Silva, P.A.; Karlsohn, M.; Theisen, W.; Reimers,
W.; Pyzalla, A.R.: Interface Characterization of
Abrasion Resistant Coatings Co-Extruded on Steel
Substrates. 79 (2008) No. 11, 885-894. DOI:
10.2374/SRI08SP049
Weber, S.; Agudo, L.; Jank, N.; Wagner, J.; Schmaranzer, C.;
Arenholz, E.; Bruckner, J.; Hackl, H.; Pyzalla, A.R.:
Investigation of Microstructure and Mechanical
Properties of Steel-Aluminium Joints Produced by
Metal Arc Joining. 79 (2008) No. 7, 530-535. DOI:
10.2374/SRI08SP022-79-2008-530
Wei, G.; Shen, F.; Sundelin, B.; Paulsson, K.; Kapilashrami,
E.; Chu, M.; Shen, Y.: Industrial Practice of BiPCI
Process of Pulverized Coal Injection for Blast Furnace
Ironmaking at SSAB. 79 (2008) No. 1, 11-16. DOI:
10.2374/SRI07SP053
Wei, J.-H.; Hu, H.-T.: Mathematical Modelling of Nonequilibrium Decarburization Process during Vacuum
Circulation Refining of Molten Steel: Application of
the Model and Results (I) - Decarburization Process
and Influences of Some Technological Factors.
79 (2008) No. 4, 243-253. DOI:
10.2374/SRI07SP102-79-2008-243
Wei, J.-H.; Hu, H.-T.: Mathematical Modelling of Nonequilibrium Decarburization Process during Vacuum
Circulation Refining of Molten Steel: Application of
the Model and Results (II) - Non-equilibrium Factors
and their Influences on the Decarburization Process.
79 (2008) No. 4, 253-260. DOI:
10.2374/SRI07SP103-79-2008-253
Wei, J.-H.; Hu, H.-T.: Mathematical Modelling of Nonequilibrium Decarburization Process during Vacuum
Circulation Refining of Molten Steel: Mathematical
Model of the Process. 79 (2008) No. 2, 132-142. DOI:
10.2374/SRI07SP101-79-2008-132-142
Wei, J.; Liu, R.; Li, J.; Shen, H.; Liu, B.: Numerical
Simulation on Transient Flow Patterns of Upper Rolls
in Continuous Slab Casting Moulds. 79 (2008) No. 8,
626-631. DOI: 10.2374/SRI08SP017-79-2008-626
Weidig, U.; Hübner, K.; Steinhoff, K.: Bulk Steel Products
with Functionally Graded Properties Produced by
Differential Thermo-mechanical Processing. 79 (2008)
No. 1, 59-65. DOI: 10.2374/SRI07SP059
Weidig, U.; Maikranz-Valentin, M.; Schoof, U.; Becker, H.;
Steinhoff, K.: Components with Optimised Properties
due to Advanced Thermo-mechanical Process
Strategies in Hot Sheet Metal Forming. 79 (2008) No.
2, 92-97. DOI: 10.2374/SRI07SP115-79-2008-92-97
Weidig, U.; Maier, H.J.; Tschumak, S.; Steinhoff, K.:
Functional Gradation of Low Alloy Steel by
Differentially Controlled Phase Transformation.
79 (2008) No. 2, 105-110. DOI:
10.2374/SRI07SP109-79-2008-105-110
Weihong, Y.; Wikström, P.; Blasiak, W.: The Influence of
Oxide Scale on Heat Transfer during Reheating of
Steel. 79 (2008) No. 10, 765-775. DOI:
10.2374/SRI08SP009
Weilandt, K.; Behrens, B.-A.; Hübner, S.; Knigge, J.; VogesSchwieger, K.: Local Strain-Hardening in Sheet Metal
and Forging Components. 79 (2008) No. 3, 165-171.
DOI: 10.2374/SRI07SP117-79-2008-165-172
Weiß, Ch.; Berger, K.; Kepplinger, W.L.: CFD Simulation of
the Carbon Dust Combustion in the COREX® Melter
Gasifier. 79 (2008) No. 8, 579-585. DOI:
10.2374/SRI08SP023-79-2008-579
Weiss, W.; Suwanpinij, P.; Togobytska, N.; Keul, C.; Prahl,
U.: Hömberg, D.: Phase Transformation Modelling
and Parameter Identification from Dilatometric
Investigations. 79 (2008) No. 10, 793-799. DOI:
10.2374/SRI08SP060
Wells, M.A.; Jondhale, K.V.; Militzer, M.; Prodanovic, V.:
Heat Transfer during Multiple Jet Impingement on the
Top Surface of Hot Rolled Steel Strip. 79 (2008) No.
12, 938-946. DOI: 10.2374/SRI08SP055
Wesling, V.; Schram, A.; Rekersdrees, T.; Wiche, H.: Process
Simulation of the Heating Phase during Conductive
High-Frequency Welding of Low-Alloy Sheet-Steel
Blanks. 79 (2008) No. 3, 202-207. DOI:
10.2374/SRI07SP124-79-2008-202-207
Westin, E.M.; Brolund, B.; Hertzman, S.: Weldability Aspects
of a Newly Developed Duplex Stainless Steel LDX
2101. 79 (2008) No. 6, 473-481. DOI:
10.2374/SRI08SP046-79-2008-473
Wiche, H.; Wesling, V.; Schram, A.; Rekersdrees, T.: Process
Simulation of the Heating Phase during Conductive
High-Frequency Welding of Low-Alloy Sheet-Steel
Blanks. 79 (2008) No. 3, 202-207. DOI:
10.2374/SRI07SP124-79-2008-202-207
Wiche, H.; Schram, A.; Masendorf, R.; Medhurst, T.:
Manufacturing and Fatigue Strength of Brazed,
Locally Hardened Structures. 79 (2008) No. 3, 219224. DOI: 10.2374/SRI07SP127-79-2008-219-224
Wieck, A.D.; Swaminathan, S.; Koll, T.; Pohl, M.; Spiegel,
M.: Hot Dip Galvanizing Simulation of Interstitial
Free Steel by Liquid Zinc Spin Coater: Influence of
Dew Point on Surface Chemistry and Wettability. 79
(2008) No. 1, 66-72. DOI: 10.2374/SRI07SP084
Wikström, J.; Nakajima, K.; Jonsson, L.; Jönsson, P.:
Application of a Model for Liquid Inclusion
Separation at a Steel-Slag Interface for Laboratory and
Industrial Situations. 79 (2008) No. 11, 826-834. DOI:
10.2374/SRI08SP006
Wikström, P.; Weihong, Y.; Blasiak, W.: The Influence of
Oxide Scale on Heat Transfer during Reheating of
Steel. 79 (2008) No. 10, 765-775. DOI:
10.2374/SRI08SP009
Wilsius, J.; Hein, P.: Status and Innovation Trends in Hot
Stamping of USIBOR 1500 P. 79 (2008) No. 2, 85-91.
DOI: 10.2374/SRI08SP010-79-2008-85-91
Wu, K.; Chen, H.; Xu, W.; He, H.; Zhou, X.; Fei, S.: Ratio
between Unconsumed Coal and Coke Particle in BF
Dust. 79 (2008) No. 12, 899-903. DOI:
10.2374/SRI08SP053
Wu, K.; Pan, W.; Xu, W.; Yin, X.; Zhang, J.; Wu, W.:
Research on Utilization Factor of Injected Pulverized
Coal into BF at Large PCI Rate. 79 (2008) No. 12,
904-907. DOI: 10.2374/SRI08SP053
Wu, M.; Könözsy, L.; Ludwig, A.; Schützenhöfer, W.; Tanzer,
R.: On the Formation of Macrosegregations in Steel
Ingot Castings. 79 (2008) No. 8, 637-644. DOI:
10.2374/SRI08SP020-79-2008-637
Wu, M.; Pfeiler, C.; Thomas, B.G.; Ludwig, A.; Kharicha, A.:
Solidification and Particle Entrapment during
Continuous Casting of Steel. 79 (2008) No. 8, 599607. DOI: 10.2374/SRI08SP024-79-2008-599
Wu, M. ; Kharicha, A.; Schützenhöfer, W.; Ludwig, A.;
Tanzer, R.: On the Importance of Electric Currents
Flowing directly into the Mould during an ESR
Process. 79 (2008) No. 8, 632-636. DOI:
10.2374/SRI08SP016-79-2008-632
Wu, W.; Wu, K.; Pan, W.; Xu, W.; Yin, X.; Zhang, J.:
Research on Utilization Factor of Injected Pulverized
Coal into BF at Large PCI Rate. 79 (2008) No. 12,
904-907. DOI: 10.2374/SRI08SP053
X
Xie, X.; Wang, N.; Zou, Z.; Guo, L.; Xu, W.; Zhou, Y.:
Analysis of Material and Energy Consumption of
Corex C3000. 79 (2008) No. 7, 547-552. DOI:
10.2374/SRI08NT007-79-2008-547
Xu, L.; Mao, W.; Yang, P.; Feng, H.: Influence of Texture on
Magnetic Aging of Cold Rolling Non-oriented Silicon
Steel Sheets. 79 (2008) No. 9, 717-720. DOI:
10.2374/SRI07SP132-79-2008-717
Xu, W.; Wu, K.; Chen, H.; He, H.; Zhou, X.; Fei, S.: Ratio
between Unconsumed Coal and Coke Particle in BF
Dust. 79 (2008) No. 12, 899-903. DOI:
10.2374/SRI08SP053
Xu, W.; Wu, K.; Pan, W.; Yin, X.; Zhang, J.; Wu, W.:
Research on Utilization Factor of Injected Pulverized
Coal into BF at Large PCI Rate. 79 (2008) No. 12,
904-907. DOI: 10.2374/SRI08SP053
Xu, W.; Wang, N.; Xie, X.; Zou, Z.; Guo, L.; Zhou, Y.:
Analysis of Material and Energy Consumption of
Corex C3000. 79 (2008) No. 7, 547-552. DOI:
10.2374/SRI08NT007-79-2008-547
Xu, Z.; Wang, H.; Wang, F.; Jin, L.: Composition Control of
CaO-MgO-Al2O3-SiO2 Inclusions in Tire Cord Steel
- a Thermodynamic Analysis. 79 (2008) No. 1, 25-30.
DOI: 10.2374/SRI07SP038
Y
Yokoya, S.; Kholmatov, S.; Takagi, S.; Jönsson, P.; Jonsson,
L.: Influence of Aspect Ratio on Fluid Flow and Heat
Transfer in Mould when Using Swirl Flow during
Casting. 79 (2008) No. 9, 698-707. DOI:
10.2374/SRI07SP116-79-2008-698
Yokoya, S.; Kholmatov, S.; Takagi, S.; Jonsson, L.; Jönsson,
P.: Effect of Nozzle Angle on Flow Field and
Temperature Distribution in a Billet Mould when
using Swirl Flow. 79 (2008) No. 1, 31-39. DOI:
10.2374/SRI07SP023
Yu, H.-L.; Liu, X.-H.; Ren, X.-J.: Behaviour of Longitudinal
Cracks on Slab Surfaces in V-H Rolling Processes.
79 (2008) No. 7, 536-542. DOI:
10.2374/SRI07SP066-79-2008-536
Yu, Z.; Lei, Z.; Li, Q.; Deng, K.; Ren, Z.: Physical Simulation
of Nozzle Electromagnetic Brake in Twin-Roll Strip
Casting. 79 (2008) No. 11, 839-842. DOI:
10.2374/SRI08SP037
Yuen, W.Y.D.; Dixon, A.E.: A Physical Based Method to
Predict Spread and Shape during Flat Rolling for RealTime Application. 79 (2008) No. 4, 287-296. DOI:
10.2374//SRI07SP045-79-2008-287
Yakovleva, I.L.; Gavriljuk, V. G.; Tyshchenko, A.; Bliznuk,
V.V.; Riedner, S.; Berns, H.: Cold Work Hardening of
High-Strength Austenitic Steels. 79 (2008) No. 6, 413422. DOI: 10.2374/SRI08SP051-79-2008-413
Yang, P.; Xu, L.; Mao, W.; Feng, H.: Influence of Texture on
Magnetic Aging of Cold Rolling Non-oriented Silicon
Steel Sheets. 79 (2008) No. 9, 717-720. DOI:
10.2374/SRI07SP132-79-2008-717
Yang, Z.; Wang, F.; Wang, S.; Song, B.: Intragranular Ferrite
Formation Mechanism and Mechanical Properties of
Non-quenched-and-tempered Medium Carbon Steels.
79 (2008) No. 5, 390-395. DOI:
10.2374/SRI07SP090-79-2008-390
Yao, M.; Zang, X.; Wang, X.; Ma, Y.; Zhang, L.:
Investigation of Friction Force between Mould and
Strand Shell under Sinusoidal and Non-sinusoidal
Oscillation in Continuous Slab Casting. 79 (2008) No.
7, 564-568. DOI: 10.2374/SRI07SP098-79-2008-564
Yin, X.; Wu, K.; Pan, W.; Xu, W.; Zhang, J.; Wu, W.:
Research on Utilization Factor of Injected Pulverized
Coal into BF at Large PCI Rate. 79 (2008) No. 12,
904-907. DOI: 10.2374/SRI08SP053
Z
Zang, X.; Wang, X.; Ma, Y.; Yao, M.; Zhang, L.:
Investigation of Friction Force between Mould and
Strand Shell under Sinusoidal and Non-sinusoidal
Oscillation in Continuous Slab Casting. 79 (2008) No.
7, 564-568. DOI: 10.2374/SRI07SP098-79-2008-564
Zdovc, M.; Medved, J.; Lamut, J.; Mrvar, P.: Influence of
SiO2 Addition on the Properties of Al2O3-CaO-CaF2
Slag. 79 (2008) No. 12, 908-912. DOI:
10.2374/SRI08SP044
Zeifert, B.; Garcia-Ramos, E.; Romero-Serrano, A.; FloresSanchez, P.; Hallen-Lopez, M.; Palacios, E.G.:
Immobilization of Chromium in Slags using MgO and
Al2O3. 79 (2008) No. 5, 332-339. DOI:
10.2374/SRI07SP107-2008-333
Zeman, K.; Kainz, A.; Ilie, S.; Parteder, E.: From Slab Corner
Cracks to Edge-Defects in Hot Rolled Strip –
Experimental and Numerical Investigations. 79 (2008)
No. 11, 861-867. DOI: 10.2374/SRI08SP052
Zhang, H.; Liu, H.; Gan, Y.: Prediction of Local Heat Flux
and Temperature Distribution in a Mould Copper Plate
for Flexible Thin Slab Casting Based on In-plant
Temperature Measurements. 79 (2008) No. 11, 843851. DOI: 10.2374/SRI07SP133-79-2008-843
Zhang, J.; Wu, K.; Pan, W.; Xu, W.; Yin, X.; Wu, W.:
Research on Utilization Factor of Injected Pulverized
Coal into BF at Large PCI Rate. 79 (2008) No. 12,
904-907. DOI: 10.2374/SRI08SP053
Zhang, L.; Zang, X.; Wang, X.; Ma, Y.; Yao, M.:
Investigation of Friction Force between Mould and
Strand Shell under Sinusoidal and Non-sinusoidal
Oscillation in Continuous Slab Casting. 79 (2008) No.
7, 564-568. DOI: 10.2374/SRI07SP098-79-2008-564
Zhang, M.C.; Gu, M.; Selvarasu, N.K.C.; Zhao, Y.; Zhou,
C.Q.: Numerical Analysis of Pulverized Coal
Combustion inside Tuyere and Raceway. 79 (2008)
No. 1, 17-24. DOI: 10.2374/SRI07SP050
Zhao, Y.; Gu, M.; Zhang, M.C.; Selvarasu, N.K.C.; Zhou,
C.Q.: Numerical Analysis of Pulverized Coal
Combustion inside Tuyere and Raceway, 79 (2008)
No. 1, 17-24. DOI: 10.2374/SRI07SP050
Zheng, S.; Zhu, M.: Study on Mechanism of Large Bubble
Formation in Slab Continuous Casting Mould with
Argon Blowing. 79 (2008) No. 12, 918-923. DOI:
10.2374/SRI08SP066
Zheng, S.; Zhu, M.: Physical Modelling of Inclusion
Behaviour in Secondary Refining with Argon
Blowing. 79 (2008) No. 9, 685-690. DOI:
10.2374/SRI07SP134-79-2008-685
Zhou, C.Q.; Gu, M.; Zhang, M.C.; Selvarasu, N.K.C.; Zhao,
Y.: Numerical Analysis of Pulverized Coal
Combustion inside Tuyere and Raceway. 79 (2008)
No. 1, 17-24. DOI: 10.2374/SRI07SP050
Zhou, X.; Wu, K.; Chen, H.; Xu, W.; He, H.; Fei, S.: Ratio
between Unconsumed Coal and Coke Particle in BF
Dust. 79 (2008) No. 12, 899-903. DOI:
10.2374/SRI08SP053
Zhou, Y.; Wang, N.; Xie, X.; Zou, Z.; Guo, L.; Xu, W.:
Analysis of Material and Energy Consumption of
Corex C3000. 79 (2008) No. 7, 547-552. DOI:
10.2374/SRI08NT007-79-2008-547
Zhu, M.; Zheng, S.: Study on Mechanism of Large Bubble
Formation in Slab Continuous Casting Mould with
Argon Blowing. 79 (2008) No. 12, 918-923. DOI:
10.2374/SRI08SP066
Zhu, M.; Zheng, S.: Physical Modelling of Inclusion
Behaviour in Secondary Refining with Argon
Blowing. 79 (2008) No. 9, 685-690. DOI:
10.2374/SRI07SP134-79-2008-685
Zimmermann, M.; Müller-Bollenhagen, C.; Christ, H.-J.;
Schröder, X.; Engel, B.; Große-Wöhrmann, A.;
Suttmeier, F.-T.: Modelling and Closed-loop Control
of Complex Tube Forming Based on an Optimized
Application of Martensite Formation in Austenitic
Stainless Steels. 79 (2008) No. 10, 745-752. DOI:
10.2374/SRI08SP082
Zinngrebe, E.W.; Kromhout, J.A.; Melzer, S.; Kampermann,
A.A.; Boom, R.: Mould Powder Requirements for
High-speed Casting. 79 (2008) No. 2, 143-148. DOI:
10.2374/SRI07SP069-79-2008-143-148
Zou, Z.; Wang, N.; Xie, X.; Guo, L.; Xu, W.; Zhou, Y.:
Analysis of Material and Energy Consumption of
Corex C3000. 79 (2008) No. 7, 547-552. DOI:
10.2374/SRI08NT007-79-2008-547
Zou, Z.; Feng, M.; Li, Q.: An Outlier Identification and
Judgment Method for an Improved Neural-Network
BOF Forecasting Model. 79 (2008) No. 5, 323-332.
DOI: 10.2374/SRI07SP051-2008-32307-210