Engineered Ston has a versatility that broadens the application of marble and limestone, allowing for the creation of new, uniform colours, as well as a wide range of formats and decorations.
It is highly resistant to impact, yet in turn its reduced thickness means a lighter construction; and its almost inexistent porosity makes cleaning considerably easier.
Engineered Ston can be installed using a concealed rail system or an adhesive fix. For further details please contact Dynamic Support on +44 (0) 8700 500981.
Engineered Ston was tested at Technology Centre
Vinci UK (Vinci) to CWCT test guidelines for
Standard Building Envelopes 2005 for the following:
Wind load & impact testing.
• Wind serviceability – 2400 pascals.
• Wind safety – 3600 pascals.
• Cyclic wind loading – 600 pascals to
2400 pascals over a 24 hour period.
• Impact resistance to BS 8200
(Soft and hard body rating category ‘B’).
• A lightweight facade system in stone appearance.
• 20 Standard colours.
• Bespoke colours and finishes available upon request.
• Through body composition.
• Special pieces available for corners etc.
• BREEAM Cat A product.
• Resistant to graffiti, scratching, abrasion, mould, bacteria, weathering,
UV and colour fade.

Our Resin Composition range comes in 9 colours which are available in either honed or polished finish.
Cement Composition comes in 11 colours available in silk, lightly sanded, bush hammered, striped and patinated finish. Please contact Dynamic Support on
+44 (0) 8700 500981 for details and samples.
Engineered Ston external sizes
14/15mm nominal thickness (+/-1mm)
Width (mm) Lengths (mm)
300/600 1600
1500
1200
800
750
Special sizes are also available from the 300mm/600mm x 1600mm master panel
System weight 30kg/m 2
Fully recycled material base
Excellent performance properties
UV resistant
Rapid construction technique
Pure Minerals (93 % - 95 %) Binding Polymer (5 – 7 %)
Portland Cement (33%) Stone Aggregates and additives (67%)
Additives (< 1%)

Sand
Finish : Silk
Sand
Finish : Lightly sanded
Sand
Finish : Bush hammered
Sand
Finish : Striped
Sand
Finish : Patinated
Light Brick Andesite Beige White Grey
Dark Beige (mottled) White (mottled) Dark Beige
Black Brick
Afion Blanco Aura Blanco Micro Dakar Marfil Albero
Marfil Stone Micro Thasoss Perla Claro Rosa Elba
All colours shown are as accurate as possible, subject to the constraints of printing techniques. While every effort has been made to ensure the accuracy of this brochure, we reserve the right to amend and improve specification without notice. We strongly recommend requesting and inspecting a sample prior to order.

Engineered Ston panels can be applied to almost any external or internal façade by concealed or adhesive fix.
In addition, our TiTracking rail system facilitates quick and easy horizontal and vertical application whilst also utilising our unique concealed extrusion system.
The extremely durable and resistant surface is specifically designed for use as external rainscreen cladding, although its remarkable finish is also proving very popular on interior applications.
Structural bonding Concealed fixing
Engineered Ston 14/15mm Cement/Resin Composition
TI Tracking Engineered Ston horizontal support rail
Engineered Ston safety movement gasket
Engineered Ston is part of the Megaform family of Dynamic Facades brought to the UK market by TI Tiles International.
We investigate and source technology in construction components worldwide. Our Dynamic Facades range includes
Terracotta Rain Screen, Aerolite Natural Stone, UrbanGlass, Fibreform and now Engineered Ston.
For more information about our products and service, please call Dynamic Support on +44 (0) 8700 500981 , or visit www.dynamicfacades.com
. TI Tiles International Ltd also provides comprehensive design assistance to site engineering support.

call 08700 500981
Need advice, more information, specification or design assistance? Dynamic Support is just a phone call away.
Our team of experts are ready to answer your questions and provide samples from our entire range of Dynamic Facades. And we can assist with design, storage and application. We've provided specific information about Engineered Ston below.
Fire rating
CWCT tested
Environment
Health & Safety
Tested at Warrington Fire Group to BS 476: Part 6: 1989
Method of test for Fire Propagation
BS 476: Part 7: 1997
Method for classification of The Surface Spread of Flame - Class 1
This product complies with all requirements for Class 0 as defined in paragraph A13 (b) of approved document B, Fire Safety to the building regulations 2000.
Tested by Technology Centre Vinci UK Ltd. to CWCT guidelines to standard
Building Envelopes : 2005
It achieves an A-rating in the Green guide to specification 4th edition.
BREEAM - qualification assistance.
Pre-cut to specification prior to delivery.
On-site modifications can be achieved - call DS for more information.
Storage To avoid damage all materials should be stored in their delivery crates until they are required to be installed and these crates must be stored on flat level ground and never stacked on top of one another.
Mobility When handling the Engineered Stone Façade panels, carry panels on their edge taking care not to chip the edges or corners; contact DS for further assistance.
Materials are stored and transported upright in their crates.
Glasgow Westview House, Devro Campus, Gartferry Road, Moodiesburn, Chryston, Glasgow G69 0JE
London The Front Building, 41a Beavor Lane, London W6 9BL
The information in this brochure is intended to act as a guideline to our products/systems performance and properties. Whilst every care has been taken to ensure accuracy, please note it is the responsibility of the specifier/installer to ensure the products/systems will meet the desired design criteria.
Specific information on design details, material properties and colour samples etc. can be requested from Dynamic Support on 08700 500981.