TM
August 2013
•
•
Introduction
Portfolio
− System


SBC
PMIC
− Power


Analog Switches
High Side Switches
Low Voltage Motor Control
− System


Power Management
Management & Automation
Small Engine
Configurable I/O
− Battery
& Energy Management
− Millimeter Wave Radar
•
Summary
TM
2
A Global Leader in
Five Core Product
Groups
Four Primary
Markets
Microcontrollers
Automotive
Digital Networking
Networking
Automotive MCU
>50 Year Legacy
Industrial
>5,500 Engineers
Analog & Sensors
>6,100 Patent Families
RF
TM
3
Consumer
Automotive
Industrial
•
•
•
•
•
•
•
SBC power management & functional safety
System management for powertrain, braking,
airbag, radar, battery, & small engines
Power drivers & actuators
Infotainment power management
Crash sensor & stability control accelerometers
Pressure sensor for TPMS & engines
•
•
•
Control, HMI, motor drive & functional safety
systems for factory automation
Lighting, climate control, metering, security for
building automation
Consumer, diagnostic, therapeutic for medical
Kiosk, power tools, & transportation
Consumer
•
eCompass & orientation detection
Digital Still Camera (sensors & motor control)
Intuitive human interface
Personal fitness
eReaders & embedded computers
•
•
•
•
TM
4
As industrial automation transitions from mechanical to electronic safety
systems, demand for integrated functional safety will increase
•
•
•
•
•
SBC power management products
with integrated safety features
eSwitch solid state relays
w/diagnostics and integrated
redundancy
MSDI (multi-switch detect
interface) for safe contact detection
and extended switch reliability
IDC – Intelligent DC motor control
w/ low side drives, high side
switches, HV switch inputs, safety
sensing inputs, diagnostics
Radar – MR2001 transceiver
chipset for encroachment detection
(light curtains) and security
monitoring (cameras)
TM
Functional Safety Standards
Automotive
Industrial
ISO 26262
IEC 61508
Safety
Support
Safety
Hardware
Safety
Software
Safety
Process
Freescale Quality Foundation
5
•
•
•
•
•
Power Management for Processor products
MC34903 – MC34904
MC34907 – MC34908
MC13892 – MMPF0100 – MMPF0200
MC34913
eXtreme Switches for solid state relays and low frequency,
high current PWM variable drives products
MC06XSD200 – MC10XSD200 – MC16XSD200
MC07XSF517 – MC17XSF500
MC34981
>24V Motor Drives products
MC34931 – MC34932
MC34937
MM912_634
BMS for industrial UPS batteries, ESS, Cordless Power tools,
Small appliances
MM912_637 – MM9Z1_638
77GHz Packaged Radar Multi-Chipset solution (RX, TX and VCO)
MR2001
TM
6
System Power
Management
Battery & Energy
Management
Embedded System Power Management (PF0100/0200)
System Basis Chips (SBC): power mgmt + comm + safety
CAN bus and LIN connectivity transceivers
Battery Monitoring System (BMS): 12V Pb, 14V Li-ion, 24V+
Alternator Regulator Chip
Stop/Start MOSFETs
Li-Ion Linear Battery Charger
System
Management &
Automation
Engine Management
Braking: ABS, ESC, WSS control
Airbag: power mgmt + comm + safety, squib drivers
Millimeter Wave Radar: 77GHz transmit & receive
DSI sensor Interfaces
Power Drivers
High & low voltage H-Bridge drivers
Low side drivers
Programmable solenoid controllers
H-Bridge and 3-phase motor pre-drivers
Intelligent Distributed Controllers (IDC)
Power Analog
Switches
18V & 36V/24A eXtreme Switches: High side FET w/ smart control
Multi-Switch Detect Interface (MSDI)
Mini/Micro Hi-Speed USB2.0 Switch Interface
TM
7
System Power
Management
Power Management with Functional Safety
Mechanisms
Battery & Energy
Management
System
Management &
Automation
Power Drivers
Power Analog
Switches
TM
8
Factory Automation
Building, Home Control
• Power Line Communication
• Programmable Logic Controller
• Elevators, Escalators
• Single Board Computer
• Access control
• HMI
• Security camera mounting
• Low end robotics
Consumer
•
•
•
•
•
•
Medical electronics
Tablets
eReaders
Smartbooks
Navigation
IPTV
IP Phone
• Infusion Pump
• Continuous Positive Airway
Pressure
• Ventilator
TM
9
System Basis Chip (SBC) composition
SBC
Eco-system
System
Management
Power
Management
•
•
•
Complete eco-system
−
Simplify customer usage (SPI, Thermal, ...)
−
EMC compliance reports
System Management
−
Energy Savings : Manage Low Power Modes
−
Functional Safety : Failsafe redundancy /
monitoring
Power Management (LDO-DC/DC)
−
Physical
Layer
•
Physical Layer (CAN/LIN)
−
TM
10
Supply MCU, CAN and other loads
Transmit Digital Network Information robustly
Flexible, scalable 0.4A/4-28V SBC with multiple LDO regulators featuring low
15µA quiescent current, CAN High Speed transceiver and safety features
•
Differentiating Points
−
−
−
−
−
•
Scalable and flexible LDO power supply with thermal boost,
ideal for Freescale’s 16 and low end 32-bit MCUs
Innovative low voltage operation down to 4.0V input voltage
Best In Class Low Power Modes (down to 15µA)
Built-in safety features for MCU verification and external IC
activation in fail mode
On-board sensing of critical analog signals (Vbat, Ivdd, Temp)
Product Features
−
−
−
−
−
−
Family of 14 products, pin-to-pin compatible, offered in both
5V and 3.3V Vdd options (Part number selectable)
Bundles with Kinetis K, Low end Qorivva MPC56xx, and
MCUs with < 2.5W (5V, 0.5A)
5.5V – 28V supply, with extended DC Low Voltage down to
4.0V
5/3.3V Vdd (150mA + opt. 300mA), and Vaux (ext. PNP), 5V
Vcan
Robust CAN HS Physical Layer (optional LIN – up to 2)
Safety Features



−
SAFE pin to drive external ICs in MCU fail mode
Secured critical changes of state machine w/ programmable fail safe
state
Advance watchdog mechanisms & secured SPI (parity checks, 8clk
count)
SOIC32eP Package
TM
11
Typical Applications
−
Body Applications (Auto)
−
Low end Power Train & Safety (Auto)
−
Motor control Safety Critical (Indus)
−
Robotics (Indus)
−
Factory Automation (Indus)
•
Fast Evaluation of SBC performance
−
−
−
Generic Family Evaluation Platform kit
KIT33905D5EKEVBE: MC33905D 5V EVB
KIT33905BD3EVBE: MC33905D 3.3V EVB


−
−
KIT33903BD5EVBE: MC33903D 5V EVB
KIT33903BD3EVBE: MC33903D 3.3V EVB


−
•
Friendly Graphical Interface
Covering 33903P, 903S, 903D versions
Working with USB to SPI: KITUSBSPIDGLEVME
Complete Technical Documentation to ease Design
−
−
•
Friendly Graphical Interface
Covering 33903, 904, 905S, 905D versions
Datasheets, Application notes, EVB contents (www.freescale.com)
Official reports from external laboratories
Easy to Use tools
−
−
−
Thermal prediction & Iq calculator tools (contacts your Sales or FAE representative)
Technical Training and hands on training on demand
FAQ and other technical marketing presentations
TM
12
MCU
8-bit
8-bit
16-bit
16-bit
16-bit
32-bit
SO8DZ
SO8DV
SO8DZ
SO8DV
S08DN
SO8EL
SO8SL
S12XE
S12XS
S12P
S12XS
S12P
S12XE
S12XS
S12P
MPC563xM
MPC560xP
MPC560xB
MPC560xC
Physical
Layer
CAN
LIN
CAN
LIN
CAN &
LIN
CAN
LIN
CAN &
LIN
Vmcu
5.0V/3.3V
100mA
5.0V
110mA
5.0V/3.3V
150mA
5.0V
110mA
5.0V/3.3V
150mA
5.0V/3.3V
150mA
-
5.0V/3.3V
150mA
Power Sharing
-
-
+300mA
-
+300mA
+300mA
-
+300mA
Attach SBC
with Pin to Pin
compatibility
SOIC32eP
SOIC54eP
33903
-
33904
-
33905S
33905D
33904
-
33905S
33905D
Attach SBC
with Pin to Pin
compatibility
SOIC32eP
-
-
33903P
-
33903S
33903D
33903P
-
33903S
33903D
Attach SBC
with Pin to Pin
compatibility
LQPF32
-
33910
33911*
33912*
-
33910
33911*
33912*
-
-
-
-
*including motor control
for Window Lift
TM
*including motor control
for Window Lift
13
32-bit
32-bit
MPC563xM
MPC560xP
MPC560xB
MPC560xC
System Basis Chip (SBC) family providing energy efficient DC/DC power conversion and low
voltage operation with advanced functional safety mechanisms
•
Differentiating Points
−
−
−
Voltage Supervisor
Ultra low voltage operation down to 2.7V supply with the
efficiency of a standard DC/DC converter
Innovative architecture allowing independent monitoring
of safety critical parameters
Scalable family of products supporting a wide range of
MCU and power segmentation architectures
Boost Driver
Vpre
440kHz Buck
VI/O - 3.3 / 5.0V
Battery sense
Vcan - 5.0V
Configurable
I/Os (6)
•
Product Features
−
−
−
−
−
−
−
−
Bundles with QorIQ (P1010) and MCUs < 4W
Flexible DC/DC Buck pre regulator with optional Boost to
fit with Low Voltage requirements
Multiple supplies up to 1.5 A
Low Power Modes (25µA)
Analog Multiplexer & Battery sensing
Independent fail safe state machine supporting
functional safety standards
Secure SPI interface
Robust physical layer with superior EMI/ESD performance
TM
14
Vcore 2.4MHz
1.2 - 3.3V configurable
Fail Safe
Inputs
Analog
& Digital
BIST
CAN
Physical Layer
Vaux 3.3 / 5.0V
Energy
Management
State Machine
INT
SecuredSPI
RST
Fail Safe
State
Machine
MCU
Challenger
Analog Multiplexer
2.5 V
Ref.
Fail Safe Inputs
Temp.
Fail Safe Output
Static&Dynamic
Typical Applications
•
Power management
•
Functional safety integration
•
Safety Critical Motor Control
Safety Functions implemented :
PowerSBC10/20 – MC33907/8
1 – Power supply and Supervisor
• Over-voltage detection
• Under-voltage detection
• Voltage supervisor provides independent
supervision of power supply
• Second power supply not necessary
2 – Failsafe inputs
• MCU error signal monitoring
• Analog IC error signal handling
3 – Watchdog
• Windowed watchdog (timing selectable
1ms to 1024ms)
• SPI refresh  Question / Answer principle
(i.e. 8-bits challenger)
Voltage Supervisor
Boost Driver
VI/O - 3.3 / 5.0V
Vpre
440kHz Buck
Vaux 3.3 / 5.0V
Battery sense
I/O[0:1]
I/O[2:3]
I/O[4:5]
Configurable
I/Os (6)
Vcan - 5.0V
Energy
Management
State Machine
Fail Safe
Inputs
Fail Safe
State
Machine
Analog
& Digital
BIST
4 – Failsafe outputs
• RSTb  MCU reset (active Low)
• FS0b  System “deactivation” (active
Low)
• FS1  PWM signal (active High) (ie.
warning lamp, position lights)
TM
Vcore 2.4MHz
1.2 or 3.3V configurable
CAN
Physical Layer
15
Vcore
Vpre
Vaux
VI/O
Vcan
Vsup
Vsense
INT
SecureSPI
RST
MCU
Challenger
MISO
MOSI
SCLK
NCS
Analog Multiplexer
2.5 V
Ref.
Fail Safe Inputs
Temp.
Fail Safe Output
Static&Dynamic
FS[0]
FS[1]
RST
Fast Evaluation of SBC performance
−
Generic Family Evaluation Platform kit
− EVB of MC33907 and MC33908


−
Friendly Graphical Interface
Working with USB to SPI : KITUSBSPIDGLEVME
Attach Strategy : Enhanced EVB combining PowerSBC &
Qorriva MCU


MC33908 (Mother Board) + MPC5643L (Daugther board)
Including demo code SW
Complete Technical Documentation available to ease Design
−
Datasheets, Application notes, EVB contents
− SafeAssure Support Covering Safety Manual, FMEDA, Pin FMEA
− Official EMC reports from external laboratories: Target completion
Sept 13
Easy to Use tools
−
Power Dissipation prediction tool
TM
16
Most economical quick-turn programmable 14-ch/11.7A system power management
solution with fully configurable voltages, sequencing and timings
•
Differentiating Points
−
−
Optimized to work with i.MX6 processors
Quick-turn customizable output voltages,
sequencing and timings
− Boost regulator to 5.0 V out for USB
− Field programmable OTP memory
− Power control logic with processor interface
and event detection
•
**
Product Features
−
−
−
−
−
−
−
−
−
2.8V to 4.5V input voltage
14-ch,11.7A (PF0100); 12-ch, 7.5A
(PF0200)
4 to 6 Channel configurable buck
converters
6 user programmable LDO
Forced PWM or automatic PSM operation
Boost regulator, coin cell charger, DDR
reference
Programmable output voltage, current limit,
soft-start, frequency switching, OTP fault
interrupt
High power 8x8 mm TQFN wettable flank
package
Consumer, Industrial and Automotive
grade available
TM
** MMPF0200 has 3/4 buck regulators instead of 5/6
Applications
17
-
Performance tablets, eReaders, Navigation
-
Industrial Single Board Computers
-
Point of Sale (POS) terminals
-
Automotive infotainment
-
Human-machine interface, Home Automation
-
Portable Medical
•
Differentiating Points
−
−
−
−
−
•
Optimized for Freescale’s i.MX family
Complete system lineup with highly
integrated Power Management & User
Interface features
Switching and linear regulators with
coordinated sequencing for system power
tree
Proven solution – millions of units
shipped
Full BSP support
Product Features
−
−
−
−
−
−
Boost, 4 adjustable buck regulators and
12 adjustable LDOs
Battery charging with backup cell
10 bit ADC for monitoring battery and
other inputs plus Coulomb Counter support
module
Real time clock / calendar / alarm
Serial WLED GPbacklighting / flashlight
Touch screen interface and ADC
TM
•
18
APPLICATIONS
−
Tablets
−
eBooks
−
Smart Devices
−
Portable Navigation Devices
−
Ultrasound Medical Equipment
−
Other Embedded Hand-held Devices
System Power
Management
High Side Switches with Diagnostic
Functions
Battery & Energy
Management
System
Management &
Automation
Power Drivers
Power Analog
Switches
TM
Switch Detect, Output Driver, Multiplexer
19
Vertical Power stage
SMARTMOSTM
 Best-in-class Technology
• Planar HD5 and TrenchFet LFET
• 45V & 65V BV
 Protection in the power
 Protection and diagnostic
• Over temperature (175°C)
• Over current shutdown
• Over/under voltage
• Short circuit
• Reverse battery
• Loss of ground/Vbat
• Energy discharge protection
stage
•Temperature sensor
• Current sensor
 SPI Interface
• Easy connection to the uP
• Programmability
• Daisy chain using SPI
• Programmable over current trip level
• Watchdog
• Embedded PWM module
Power package
 PQFN low cost power package
• 0.5 mm thick lead frame
• Die soldered attached
• Rthj-c < 0.5°C/W
 SOICeP32 and 54
• Designed for high power
• Large al wire capability
•Pb-free compliancy
TM
20
Factory Automation
DC Motor
•
•
•
•
•
•
•
•
•
Heater
Electric doors
Wiper
Washer pump
Low end robotic
Machine inspection
Vending machines
HVAC
Hospital bed controller
• PLC
• Industrial printing systems
• POS terminals
Start
Stop
Capacitive loads
Inductive loads
•
•
•
•
•
•
•
•
Solenoids
Water and fluid control app
Valves controllers for thermostats
Home Automation system
TM
21
External lighting
Xenon
Halogen
LEDs
Dual 6mW
Dual 10mW
Dual 16mW
Scalable, programmable family of 24A/36V SPI-driven, dual-channel, smart
high-side switches with lowest RDSon for up to a 30% board reduction
•
•
Differentiating Points
−
Robustness: Unique over-current latch-off protection, full digital &
analog diagnostic and protection features with embedded failsafe
mode
−
Integration: Unique daisy-chainable SPI control for dual low RDSon
channels in a single package
−
Accuracy: 5X better current sensing accuracy over temperature &
supply voltage range with unique accurate temperature sensing
capability
−
Scalable: Compatible PCB foot print and SPI software driver among
the 24A/36V product family
−
Lowest RDSon in Dual Configuration: 20% smaller PCB due to
lower power dissipation when using 12A/channel or 24A/dual in a
thermally enhanced package
Product Features
−
Dual 24A/36V high side switch family with 6, 10, or 16 mohm RDSon
channels
−
Normal operating range: 8.0 - 36 V, extended range: 6.0 - 58 V
−
Flexible load management 1-24A with possible parallel output
operating modes
−
Programmable dynamic threshold over current protection and
over-temperature protection with programmable auto-retry functions
−
3.3 V and 5.0 V compatible 16-bit Daisy chainable SPI control
−
±5°C temperature and synchronous / asynchronous current (±10%)
sensing
−
Individually programmable internal/external PWM clock signals
TM
22
Typical Applications
Transportation 12 / 24V
o 24V Lighting and capacitive loads
o Valves
o DC motors
Industrial
o High current / highly inductive loads
(solenoids)
o DC Motor control
o Factory automation
VPWR
Up to 36V
+ Under
voltage
Over
voltage
SPI
Fault
Mgmt.
Simplified
SW
Load Shorted to
Battery
Open load
OFF – ON – LED
Current sense
high precision
Over
temp
Automatic PWM
Load
short-circuit
(100mW)
loads
eXtreme
Switch
Module output
short-circuit
(20mW)
Ground
loss
Overload
System Diagnostic
Open load ON – OFF – LED
Load Shorted to Battery
Current sense
TM
Switch Protection
Over temp
Ground loss
Reverse Battery
23
System Protection
Over-under voltage
Module output short-circuit
Load short-circuit
Overload
SPI 1
MOSI
SCLK
CS
MISO
MISO
SCLK
CS1
MOSI
OUT1
OUT2
CSNS
MOSI
OUT3
SCLK
CS
MISO
OUT4
Chain1
(8 devices)
MCU
SPI 2
SCLK
CS1
MOSI
OUT1
OUT2
CSNS
MOSI
OUT3
SCLK
CS
MISO
OUT4
CSNS
A/D1
Common Precision
resistor
Chain2
(5 devices)
MOSI
SCLK
CS
MISO
MISO
• Freescale SPI Solution
All devices can be connected in Daisy Chain
 8 I/Os pins used for 26 loads SPI control
• Freescale Current Sense Solution
All non active current sense pins can be tri-stated
 1 Analog Input on µC used for current sensing
CSNS
µC
• Application Needs
26 * 2A loads with current sense
• Freescale Solution Summary
 only 9 IOs of µC required
 only 2 Resistors for Fail Safe (Output and Status)
 only 1 High Precision Resistor
Freescale Advantages vs. Competition
(2 outputs, 2 current sense & no SPI)
 SPI and Technology
 >30 IOs saved and >50 resistors saved !
(no Resistors for MCU connection)
 Daisy Chainable and common Precision resistor
 25 A/D saved and 25 high precision Resistors
saved ! (and/or external analog multiplexer)
eXtreme Switch saves “Size – Weight – Cost” at module level
TM
24
•
Evaluation kit



•
Reference design

•
KIT06XS4200EVBE for the Dual 6 mOhm device
KIT10XS4200EVBE for the Dual 10 mOhm device
KIT20XS4200EVBE for the Dual 20 mOhm device
16-bit MCU S12G, 4 eXtreme Switch devices, CAN Physical
Layer, 5V regulator
Application notes and tools

MC06XS4200 / MC10XS4200 / MC20XS4200 Datasheets

AN2467: Power Quad Flat No-Lead (PQFN) Package

AN3298: Solder Joint Temperature and Package Peak Temperature

AN4516: IBIS Model File for Dual 24V High Side

AN4474: EMC and Fast Transient Pulses Performances for Dual 24 V
High Side

AN4473: Compact Thermal Model for Dual 24V High Side Switch

AN4515: Lifetime Computation for Dual 24V High Side

AN4542: Repetitive Short-Circuit Performances for Dual 24V High Side

Microsoft Excel© Thermal Calculator

Cadence Orcad© Behavioral models
TM
25
Scalable family of 22A/18V programmable penta high-side switches with wide range diagnostic
current sensing and lowest RDSon for up to 30% smaller PCB and 50% lower component count
•
Differentiating Points
−
−
−
−
−
−
•
Robustness: Unique over-current latch-off protection, full digital and
accurate analog diagnostics, and protection features with embedded
failsafe mode
Integration: 5 configurable low RDSon channels with daisy-chainable
SPI
Density: Thermally enhanced package for affordable high switch count
modules with up to 30% lower power, 30% smaller PCB footprint and
50% fewer components
Accuracy: Advanced current sensing over temperature and supply
voltage range allowing accurate current monitoring from 25mA to 22A
Scalability: Pin and SW driver compatible family
Best thermal efficiency: Lowest RDSon in penta configuration
Product Features
−
−
−
−
−
−
−
−
−
Penta 5 x 17mohm and penta 3 x 7mohm + 2 x 17mohm configurations
Operating voltage range from 6 - 18 V with sleep current < 5.0 μA
Flexible load management up to 11A, 22A with enhanced thermal
management
Enhanced output current sense (down to 25mA) with programmable
synchronization signal, ±5°C temperature and ± 1% battery voltage
feedback
5.0 MHz 16-bit daisy chainable SPI control
Full diagnostic and protection including over-current profiles, outputON and –OFF open load detections, thermal shut-down, pre-warning,
and fault reporting
Individually programmable internal/external PWM signals with 8 bit
duty cycle control
Watchdog and failsafe mode
External smart power switch control
TM
26
Typical Applications
Transportation
o 12V Lighting from High beam to LEDs
o Valves
o DC motors
Industrial
o High current / highly inductive loads
(solenoids)
o DC motor control
o Factory automation PLC
High-current and High frequency capable, smart high side switches with protected half
bridge configuration enable up to a 25% board area reduction and module simplification
•
Differentiating Points
−
Flexibility: fully protected 30A High Side switch with adjustable
slew rate to control loads from DC to 60kHz including self
recovery features. Gate driver configurable signal of external low
side for protected half bridge application.
− Robustness: Full High side protection including current sense
and temperature sense and reverse battery protection. Crossconduction protection in case of half bridge configuration.
Hardware-configurable low side overcurrent protection included.
− System integration: 30A - 400W DC motor control capability
thanks to low Rdson and good thermal enhanced package.
Configurable slew rate allowing best tradeoff between switching
losses and EMC performance for a low cost EMI filter.
•
Product Features
−
−
−
Operating range from 4.5V to 27V
Single 4.0 mW RDS(ON) maximum high side switch
PWM capability up to 60 kHz with duty cycle from 5 % to 100 %.
Charge pump included
− Slew-rate control with external capacitor for EMC versus power
losses tradeoff optimization
− Overcurrent and overtemperature protection, reverse battery
protection, undervoltage shutdown, and fault reporting. Output
current monitoring and temperature feedback
− Gate drive signal for external low side Nchannel MOSFET with
protection features. Includes cross-conduction protection and
flexible Low Side.
TM
27
Typical Applications
•
•
•
•
•
•
•
Fan engine cooling
Air conditioning blower
Pumps (oil, fuel, water…)
Compressor
Marine systems
Farm equipment
Actuator controls
•
Switch detection solution targeting body electronics and industrial applications.
Differentiating Points
−
−
−
Switch input voltage range -14 V to VPWR, 40
V Max
Supply voltage range 5.5 V < VPWR < 26 V
VDD
Battery
MC33909
SG1
Battery
Selectable wetting current

SP0
WAKEb
16mA or 32mA (part selectable)
VDD
SP1
−
Standby current: VPWR 100 uA max, VDD
Standby 20 uA max
− Analog multiplexer with SPI control.
−
•
SP7
32 ld SOIC Thermally Enhanced SOIC EP
14 switch-to-ground inputs

8 programmable inputs (switch to battery or ground)
SG13
−
Direct Interface to a MCU using a 3.3V/5.0V SPI
protocol
−
Selectable wake-up on change of state
24-1 analog multiplexer
− WAKE_B pin to control power supply enable
•
•
INT_B pin for active interrupt on change of switch
state.
TM
INTb
CSb
MISO
MOSI
SCLK
CSb
MISO
MOSI
SCLK
AMUX
AN0
28
EP
GND
Typical Applications
−
−
INTb
SG12
Detects 22 switch inputs:

Bolero
VDD
SG0
Product Features
−
VBATP
Automotive
• Body electronics
• Powertrain
Industrial
• Relay closure detection
• Industrial control
• Security systems
System Power
Management
Battery & Energy
Management
System
Management &
Automation
Power Drivers
Power Analog
Switches
TM
29
Factory Automation
Building Home Control
•
•
•
•
HVAC
Heat pump
Access control
Security camera mounting
• DC motor
• Servo motor
• Stepper drive
Medical Electronics
Others
•
•
•
•
•
• Infusion pump
• Continuous Positive Airway
Pressure
• Ventilator
Vending machine
Ticketing machine
POS terminals
Power tools
E-bikes
TM
30
•
TM
31
Crossbar Switch
Dual mCores
Dual mCores
Differentiating Points
− 4 programmable controllers for flexible current profile
management
− Tightly coupled feedback with 0.9 uS response time
(16x faster as compared to standard solution)
− 5 high / 7 low side pre-drivers with dedicated
integrated boost controller
− Outputs configurable for up to 3 banks with external
high side driver
− Output current and voltage sensing with integrated
diagnostic processing
− 13 GPIO (StartX, Flags, OA_x, DBG, IRQB)
configurable as independent line level outputs
− Embedded encryption for microcode protection
− SPI control with IRQB plus 3 interrupt flags
− System BOM cost reduction up to 13%
Product Features
− 9 – 32V continuous supply, 5.5 – 58V transient
− Up to 72V pre-driver operating range
− Precision peak & hold drive capability
− Four independent controllers allow independent
solenoid operation without microcontroller
intervention
− Integrated DC-DC boost converter control circuitry –
up to 300kHz PWM
− 100kHz PWM frequency for other pre-drivers
− Robust built-in ESD protection – withstand up to 80V
maximum rating
− Choice of four programmable slew rates 12.5V/uS –
300V/uS
− 10 x 10 mm 64p LQFP-EP
Voltage Monitoring
•
Logic Control
Programmable controller for driving up to 6 solenoids with precision output current profiles
in dynamic load environments with integrated 72V high side and low side pre-drivers
Bank 1
Boost DC-DC
converter
Bank 1 & 2: topologies for both Banks are the
same and can drive up to three solenoids per Bank
Typical Applications
−
Gasoline/Diesel Direct
Injection (GDI/DDI)
−
Dual Clutch Transmissions
−
Industrial Precision Solenoid
Control
MC33926 (PQFP)
MC33931EK & MC34931EK (SOIC) Single
MC33932EK & MC34932EK (SOIC) Dual
Most thermally efficient 28V/5A H-Bridge DC motor driver featuring real-time load current
monitoring and automatic thermal back-off ensures high availability operation in demanding
high current, high temperature automotive and industrial applications
•
Differentiating Points
−
−
−
−
•
Best thermal efficiency: 2X lower thermal impedance
with SOIC package, saving board space and simplifying
design
Automatic thermal back-off: Temperature regulated,
peak current limiting ensures continuous high availability
operation
Real-time load current monitoring: Analog feedback
current mirror feature used for motor control or load
protection
Design-in simplicity: Integrated H-Bridge with charge
pump, control, protection and four MOSFETs
Product Features
−
−
−
−
−
−
Single and Dual H-Bridge configurations
High efficiency 125 mΩ typical RDS(ON)
5.0 V to 28 V continuous operation, 42 V transient
5.0 A continuous, 100 A pulsed delivered to inductive
loads
3 & 5 V TTL/CMOS compatible
Status Flag output reports under-voltage, over-current,
and over-temperature fault conditions
TM
32
Single H-Bridge Application
Auto Applications
•
•
•
•
Throttle Control
Exhaust Gas Recirculation
Shock Absorber / Braking
Rear Window control
Industrial Applications
•
•
•
•
Robotics / Factory Automation
POS, ATM, Vending Kiosks
Security Camera (PZT)
Medical
Development Kits with Evaluation
Board
MC33926R2 (PQFP)
MC33931EK & MC34931EK (SOIC) Single
MC33932EK & MC34932EK (SOIC) Dual
Includes:
• Development board
• Instruction Sheet
• Schematic and Bill-of-Material
• Software and Ribbon Cable
• Available now at:
KIT33926PNBEVBE
KIT33932VWEVBE
KIT33932EKEVBE
Compatible with USB computer
interface board
• Available now at: KITUSBSPIDGLEVME
MC33926R2:
MC33931VW:
MC33932VW:
MC33931EK:
MC33932EK:
MC34931EK:
MC34932EK:
Samples/Production available now
TM
33
PQFN, Single, Automotive
HSOP, Single, Automotive
HSOP, Dual, Automotive
SOIC, Single, Automotive
SOIC, Dual Automotive
SOIC, Single, Industrial
SOIC, Dual, Industrial
Three-Phase FET Pre-driver with extended voltage range (6V to 58V) and robust faultmonitoring and failure protection for industrial brushless DC (BLDC) motor control
•
Differentiating Points
−
−
−
−
−
•
Extended supply operation range from 6V to 58V
Wide dead time range (0 ns – 10.5 µs) is programmable
via SPI interface
Robustness design against large positive or negative
transient spikes on gate driver
Protection against reverse charge injection from CGD
and CGS of external FETs
Device configuration and diagnostics via SPI
Product Features
−
−
−
−
−
Typical Applications
Suitable for 12V, 24V, or 48V motor systems
Direct interface to 3.0V/5.0V MCUs
Greater than 1.0 A gate drive capability with protection
Charge pump for operation with supply voltage less than
17V
Rich diagnostic features accessible via SPI interface
TM
34
−
Portable electric power tools
−
Electric bicycles and wheelchairs
−
HVAC fans and pumps
−
Industrial and consumer robots
−
Vacuum cleaner
Integrated Intelligent DC Motor Driver single-package solutions targeting
satellite / space constrained applications such as car window-lift and factory automation
•
Differentiating Points
−
−
−
−
−
−
−
•
LIN conformance and ESD/EMC robustness
Integrated MCU and analog features in the
same package
Easy control of high-current motors using
relays and current sense features
Internal protection features provide full
protection for output stages (with status
reporting)
Six configurable wake-up inputs for
maximum system flexibility
Low-power mode flexibility and wake-up
options, including 7 wake-up sources
Reverse-battery-protected voltage sense
Product Features
−
−
−
−
−
−
−
Integrated SBC
Robust LIN physical layer
Integrated MCU, Flash, RAM
Low-power features, Multiple wake-up features
18V Hall Sensor Supply
Current Sense Module with selectable gain
Battery Voltage Sense with Low Battery
warning and reverse Battery protected
− Six High voltage inputs with Wake-Up
capability
− 2 protected High-Side outputs, 2 protected
Low-Side outputs to drive inductive loads
TM
Typical Applications
•
•
35
Automotive
• Window lift, Seat Control, Sunroof
• Fan Control
Industrial
• 24V Brushed DC Motor Control
• 24V Actuator Control: Intelligent Relay
Driver IC / Circuit Braker
System Power
Management
Battery & Energy
Management
System
Management &
Automation
Power Drivers
Power Analog
Switches
TM
36
Engine control analog power IC intended for 1 to 4 cylinder motorcycle and other
small engine control applications
•
Differentiating Points
−
Scalable and flexible solution suitable for various engine sizes
(25–1000cc) and cylinders (1-4) ; accommodate FlexFuel.

−
Integrates all necessary analog functions into the IC for lower
system complexity

−
•
Dedicated devices for 1 cylinder low end (MC33812, MM912_812 (SiP)), 1
cylinder High End (MC33813), 2 Cylinders High End (MC33814)
Ignition pre-driver, Injector driver, VRS, Tachometer, Fuel pump, Sensor
supply
System integration MM912_812 (SiP - MCU + Small Engine
Controller in single package)
Product Features
−
−
−
−
−
−
−
−
Supports supply voltage range of 4.5 V ≤ VPWR ≤ 36 V
Differential/single-ended VRS conditioning circuit with
auto/manual selectable thresholds (MC33813/14)
Up to two Fuel injector drivers
Up to three pre-drivers for ignition, O2 sensor (HEGO) or general
purpose
Up to three drivers for fuel pump, lamp, and power relay control
Independent fault protection with all faults reported via the SPI
ISO-9141 K-Line interface for communicating diagnostic
messages
KeySwitch logic with provision for power relay and MCU controlled
shutdown
TM
37
Typical Applications
−
1 to 4 cylinder electronic engine
control
−
Electronic Fuel Injection (EFI)
−
Capacitive Discharge Ignition
(CDI)
•
Hardware Development Tools
−
−
−
−
−
−
•
Software Development Tools
−
−
−
−
•
MC33812 EVB and Reference Design
MM912_812 (SiP) EVB and Reference Design
MC33813 EVB and Reference Design
MC33814 EVB and Reference Design
CDI EVB and Reference Design (in Development)
Available now at www.freescale.com/smallengine
FSL CodeWarrior
MicroSquirt ECU application code (EFI)
Freescale ECU application code (EFI, CDI)
Available now at: www.freescale.com/smallengine
Relevant Application Notes:
−
−
−
AN4258: Serial Bootloader for S12(X) Microcontrollers Based on 180 nm
Technology
AN3961: EEPROM Emulation for the MC9S12XS and MC9S12P Families
Using AN2302 as a Reference
AN3937: MC9S12P-Family Demonstration Lab Training
TM
38
MC33813 and MC33814 EVB
and Reference Design
System Power
Management
Battery & Energy
Management
System
Management &
Automation
Power Drivers
Power Analog
Switches
TM
39
−
−
−
−
−
Internal Bus
TCLK
TEST_A
VDDA
TEST
PA5
Amplitude Controlled
Low Power Pierce Osc.
PLL with Freq. Modulation option
OSC Clock Monitor
Periodic Interrupt
Interrupt
Control Module
D2DCLK
PC0
PD6
D2DDAT2
PD2
PTA
DDRA
D2DDAT1
PD1
MOSI
SPI
MISO
VREG
1.8V Core
2.7V Flash
VSENSE3
16 Bit
ADC
PTB0
D2DDAT0
PD0
SCK
1/
52
D2DDAT4
PD4
SS
PA0
Internal Chip
Temp Sense
(with optional
external inputs)
Die To Die
Interface
D2DDAT5
PD5
RxD
VSENSE2
D2DDAT6
D2DI
msCAN
VSENSE1
1/
28
D2DDAT3
PD3
RAM 8k Byte
VSENSE0
1/
16
D2DDAT7
PD7
EEPROM 4k Bytes with ECC
PA2
PA1
VBAT Sense Module
(AAF, and optional Inputs)
Debug Module
include 64 byte Trace Buffer RAM
ALU
Flash 128k Bytes with ECC
PA3
ADCGND
1/
10
COP Watchdog
Interrupt Module
CPU
Register
AGND
Trimming /
Calibration
Single-Wire Background Debug
Module
Reset Generation and
Test Entry
S12Z CPU
PA4
ADC Regulator
16 Bit
- ADC
PTB
[1:0]
Wake Up Control Module
(with Current Threshold
and Current Averaging)
D2DINT
PC1
PTB1
MCU Die
40
4 Channel Timer
Cascaded
Voltage Regulators
PTB2
G
P
I
O
VDDH = 2.5V
(D2D Buffer)
VDDL = 2.5V
(Internal Digital)
VDDX = 5V
(MCU, ext CAN Phy)
PTB3
TxD dominant
fault detetction
SCI
PTB4 (CAN wu Input)
LIN
Physical
Layer
BIAS
PTB5 (GND SW)
GNDSUB
GNDSUB
LIN
LGND
VSUP
VDDL
DGND
VDDX
Analog Die
VDDH
Integrated MCU, Flash, RAM, communication
3x 16-bit ADC for Current, Voltage and
Temperature
Low-power features
Multiple wake-up features (Current, temp, etc)
Configurable HW filters
Robust LIN physical layer
MM912J637: 16-bit MCU targeting lead acid
battery management over LIN interface
MM9Z1J638: High-end 16-/32-bit MCU
targeting a wide range of battery applications
over CAN or LIN interface
TM
ISENSEL
16 Bit
- ADC
GNDSUB
−
PGA
with Auto Gain
Control
Low Pass Filter
And
Control
VSSRX
−
ISENSEH
Current Sense Module
Scaling to diff
shunts
PTE1 / XTAL
Product Features
−
ANALOG
Reset
Control Module
TxD
•
RESET_A
PTE0 / EXTAL
VDDD2D
−
MCU
Internal Bus
−
Test
Interface
PA6
VSSD2D
−
LIN conformance and ESD/EMC robustness
Configurable ADC HW filters reduce
Software complexity
Lower average current consumption
Variety of voltage input types
to address various applications
VDDRX
−
RESET
Differentiating Points
PA7
•
BKGD/MODC
Integrated precision battery monitoring single-package solutions targeting missioncritical applications such as start-stop vehicles and energy storage systems
Typical Applications
For mission critical battery operations:
•
Automotive
•
12V Lead Acid, 14V Li-Ion
•
48V HV BMS, Battery Junction Box
•
Trucks & Utilities
•
24V Lead Acid
•
Industrial
•
Energy Storage Systems (ESS), UPS
•
Industrial Automation precision monitor
•
Cordless tools & appliances
9Z1_638
Multiple Cells
Product Function
• Measurement of battery
Voltage, Current &Temperature
• Determination of key
battery characteristics:
• State of Charge (SoC)
• State of Health (SoH)
• State of Function (SoF)
• Cell Measurement
• Control of Balancing & Motor
driver circuitry
• Safe Communication to Host
• ECU Power management
Application Examples:
• 4 cell Li-Ion Battery
TM
Multi- Battery
Product Function
• Measurement of battery
Voltage, Current and
Temperature
• Determination of key
battery characteristics:
• State of Charge (SoC)
• State of Health (SoH)
• State of Function (SoF)
• Communication to Host
• ECU Power management
Application Examples:
• Truck/ light vehicles
• Forklifters
41
UPS
Product Function
• Input Sensing
• Battery Switch Control
• Boost Control
• Battery Control
• Buck Control
• Output Sense
9Z1_638
9Z1638
9Z1638
Battery
HV Battery Junction Box
Product Function
• Meas of stack voltage
• Meas of Total Current
• Meas of HV Switch position
• Safe communication (CAN) to
Host
Application Examples:
• Battery Junction Box of Auto EV/
HEV Batteries and ESS Batteries
Battery Module Controller
Product Function
• Meas of Redundant
Battery Module Voltages (Supervisor
for safety critical measurements)
• Measure Battery Module Current
• SoC / SoH calculation
• Charge Balance control
• Fast and Safe Communication to Host
using CAN)
Application Examples:
• Safety critical HV Batteries
for Auto EV/ HEV and ESS
TM
42
Low-Cost Battery Controller
Product Function
• Meas of Battery Stack Voltage
• Measure Battery Stack Current
• Meas of Switch position
• Control Switch pre-drivers
• Control Stack of Battery Module
• SoC / SoH calculation
Application Examples:
• E-bikes
• Power tools
•
Fast Evaluation of Device performance
−
EVBs for MM912_637 and MM9Z1_638




•
Complete Technical Documentation available to ease
Design
−
−
−
•
Datasheets, EVB contents
Safety Assessment / FMEDA in development for MM9Z1_638
Official EMC reports from external laboratories
Reference Designs
−
MM912_637 Reference design in development

−
12V PB Battery (LIN)
MM9Z1_638 Reference designs in development



•
Friendly Graphical Interface
Easy to use debugging tool
CodeWarrior compiler
ProgsS12 P&E
12V PB Battery (LIN)
12V PB Battery (CAN)
14V 4-cells Li-ion Battery (CAN and LIN)
Easy to Use tools: Support design wins
−
−
Technical Training and hands on training on demand
FAQ and other technical marketing presentations
TM
43
System Power
Management
Battery & Energy
Management
System
Management &
Automation
Power Drivers
Power Analog
Switches
TM
44
The MR2001 chipset is a scalable radar solution for high end and low end ADAS
applications, industrial safety, security, and robotics
•
Differentiating Points
−
−
−
−
−
−
−
−
•
Scalable to 4 TX channel and 12 RX channels with
simultaneous active channels to enable a single platform
capable of electronic beam steering across a wide fieldof-view
Advanced packaging technology to ensure the highest
performance and minimum signal interference on the
customer PCB
Low power consumption 2.5 W typical for the complete
transceiver
Supports fast modulation at 100 MHz / 100 ns
Best phase noise performance < -85 dBc/Hz at 100 kHz
offset to improve target separation
Integrated baseband filter and VGA saves system bill-ofmaterials cost
Local oscillator at 38 GHz to lower the distribution loss and
reduce system interference
Bi-phase modulator on the transmitter chip supports
improved detection accuracy
Preliminary — Subject to Change Without Notice
Key characteristics
−
−
−
−
−
−
−
−
Differential Tx outputs delivering minimum 10dBm with
integrated bi-phase modulator for advanced correlation
coding
Tx output power adjustable via SPI with 5-bit digital
control
Each Rx channel has integrated VGA and BB filtering
matched to RaceRunner sigma-delta A/D converters for
optimal performance
Built-in receive chain test mode when using
RaceRunner microprocessor
Each part addressed via a common SPI bus
Temperature detector on each MR2001 chip
VCO provides four 38GHz LO distribution ports with
independent power control and power detectors
VCO phase noise better than -95 dBc/Hz@1 MHz offset
TM
Typical Application Diagram
Typical application
 ADAS 77GHz Radar, Industrial Safety, Security,
and Robotics
45
•
Power Management: MC33907 and MC33908, new generation
of System Basis Chip, combine energy efficient DC/DC Power
Supply that support lowest operating voltages standards and
advanced functional safety mechanisms.
PC Samples Q4 2013
•
eXtreme Switch: Scalable, programmable family of 24A/36V SPIdriven, dual-channel, smart high-side switches with lowest
RDSon for up to a 30% board reduction
MC Samples Now
•
Battery Management Systems: 24V integrated (BMS) for
industrial UPS batteries, cordless power tools, small appliances
PC Samples Now
•
77GHz Radar system: Industry’s most complete radar system
scalable to multiple channels for precise detection of objects for
high end and low end ADAS applications, industrial safety,
security, and robotics.
PC Samples Q1 2014
TM
46
TM