factory-installed battery packs

advertisement
FEA
TURES
FEATURES
PERFORMANCE
•
Opertates one twin-tube, triple-tube or quad-tube compact
fluorescent lamps for 90 miutes. Compatible with electromagnetic and electronic ballasts.
•
Protects against partial or isolated power outages. Low-glare,
shadow-free illumination provides excellent visibility for safe
building evacuation.
•
Fixture wires two ways: on night light circuit (permanently
energized) or on switchable circuit (unswitched circuit to the
battery pack and switched circuit to the fixture ballast). Battery pack will energize lamp during power outage regardless
of switched on/off position.
BATTERY
•
Sealed, maintennance-free, high=-temperature nickel-cadmium battery. Ensures long life over wide temperature
ranges. Recharges in 24 hours. Automatic battery recharge
after a 90-minute discharge.
•
Pilot light and test switch provide visual and manual means of
monitoring system operation.
ELECTRONIC
•
Constant-current series resistor-type charger. High-efficiency
push-pull inverter provides most effective method of DC to AC
conversion for maximum light output, battery life and reliability.
DIAGNOSTICS (SD option)
•
Single bi-color LED indicator to display two-state charging,
test activation and three-state diagnostic status.
•
Test switch provides manual activation of 30-second diagnostic testing for on-demand usual inspection.
•
Self-diagnostic testing for five minutes every 30 days and 30
minutes every six months.
•
Diagnostic evaluation of AC to DC transfer, charging and battery condition.
•
Continuously monitors AC functionality.
INSTALLATION
•
Battery packs, pilot light and test switch are integral components of the luminaire. Due to the design of some luminaires,
the pilot light and test switch may be remote mounted.
•
Optimize the ease and time required for job-site installation.
LISTING
•
UL listed. UL 924, NFPA 101 (current Life Safety Code), NEC and
OSHA illumination standards.
•
Provides the most effective solution for the minimum path of
egress lighting requirements, as specified in the Life Safety
Code.
WARRANTY
•
Three-year total customer satisfaction warranty. Luminaire
and ballast are covered by separate warranties. Consult
Gotham for details.
Type
Catalog number
.........................
................................................................................
.........................
................................................................................
Architectural Indoor Compact Fluorescent
Emergency Lighting Systems
EL
FACTOR
Y-INST
ALLED
ACTORY
-INSTALLED
BA
TTER
YP
ACKS
BATTER
TTERY
PACKS
Available on all recessed compact
fluorescent downlighting luminaires
Pilot Light & Test Switch Remote Mounted
Pilot Light & Test Switch Integral to Luminaire
Examples:
ORDERING INFORMA
TION
INFORMATION
Order factory-installed emergency lighting battery packs by adding an EL option to your lighting fixture catalog number. Do not list your
factory-installed emergency option as a separate order item. Consult Emergency Systems or Architectural Indoor® section of Product
Selection Guide for additional information.
AF 2/26DTT 8AR 277 EL
AF 32TRT 8AR 120 ELR
AF 2/26DTT 8AR 277 ELSD
Options 2
EL Fixture equipped for one-lamp emergency operation. Pilot light and test
switch are integral to luminaire.
ELDL Fixture equipped for one-lamp emergency operation. Pilot light and test
switch are integral to luminaire. UL listed for damp location.
ELR Fixture equipped for one-lamp emergency operation. Pilot light and test
switch are remote mounted.
ELRDL Fixture equipped for one-lamp emergency operation. Pilot light and test
switch are remote mounted. UL listed for damp location.
EL48 Full light output fluorescent emergency ballast operates one or two 4pin twin-tube, triple-tube or quad-tube (9–40 watts) lamps and one 2-pin
twin-tube or quad-tube (9–26 watts) lamp. Must be used in conjunction
with a 48V DC central battery supply.
ELSD1 Fixture equipped for one-lamp emergency operation. Pilot
light and test switch are integral to luminaire. Includes selfdiagnostic capabilities.
ELDLSD1 Fixture equipped for one-lamp emergency operation. Pilot
light and test switch are integral to luminaire. UL listed for
damp location. Includes self-diagnostic capabilities.
ELRSD1 Fixture equipped for one-lamp emergency operation. Pilot
light and test switch are remote mounted. Includes selfdiagnostic capabilities.
ELRDLSD1 Fixture equipped for one-lamp emergency operation. Pilot
light and test switch are remote mounted. UL listed for damp
location. Includes self-diagnostic capabilities.
NOTE:
1 Self-diagnostics (PSSD module) ships with fluorescent battery pack. See PSSD Inverter Accessories specification sheet for details on self-diagnostics.
2 Add 2LP to any suffix for 2-lamp operation. Ex. ELSD2LP
EL GOTH
TECH-140
EL Factory-Installed Battery Packs
SPECIFICA
TIONS
SPECIFICATIONS
DIMENSIONS
AVAILABILITY / COMPATIBILITY CHARTS
Electro-Magnetic Ballast (2-pin)
Dimensional Changes
When EL Is Added To Compact
Fluorescent Architectural Indoor Downlights
1-Lamp
2-Lamp
490
---
Product
AFV5
AFV6
AFV8
AFVW5
AFVW6
AFVW8
AF6
AF8
AF9
AF10
AFZ
LGF7
LGF9
LGFV7
LGFV9
LGFV12
G23
565
---
580
635
675
750
790
900
GX23-2
GX23-2
G24d-2
G24d-2
Electronic Ballast (4-pin)
Catalog
Number
AF1
AFW1
AFZ2
AFV1
AFVW1
LGF2
LAF2
AF1
AFV2
AFVW2
LGFV2
LAF2
Lamp Lamp Base
Description
Philips
Osram/
Sylvania
GE
GX24q-1
“PL Cluster”
PL-C 13W/4P
“Dulux D/E” “Double Biax”
CF13DD/E/8
F13DBX/4P
13W
13W
Quad-Tube GX24q-2
(4-pin)
“PL Cluster”
PL-C 18W/4P
GX24q-3
“PL Cluster”
PL-C 26W/4P
Super
Compact
Lamp Manufac.
Initial Lumen
Initial Lumens
Rating
Lamp 1 Lamp 2
900
580
635
“Dulux D/E” “Double Biax” OS & PL-1250
CF18DD/E/8
F18DBX/4P
GE-1150
18W
18W
675
750
“Dulux D/E” “Double Biax” OS & PL-1800
CF26DD/E/8
F26DBX/4P
GE-1710
26W
26W
790
900
595
615
735
740
1070
625
795
*
GX24q-2
Super
Compact
“Dulux T/E” “Triple Biax”
“PL Triple”
PL-T 18W/4P CF18DT/E/IN/8 F18TBX/SPX
18W
18W
1200
GX24q-3
“Dulux T/E” “Triple Biax”
“PL Triple”
PL-T 26W/4P CF26DT/E/IN/8 F26TBX/SPX
26W
26W
1800
“Dulux T/E” “Triple Biax”
“PL Triple”
PL-T 32W/4P CF32DT/E/IN/8 F32TBX/SPX
32W
32W
OS & PL-2400
GE-2200
Triple-Tube
GX24q-3
(4-pin)
GX24q-3
“Dulux T/E”
“PL Triple”
PL-T 42W/4P CF42DT/E/IN/8
42W
*
3200
CF = Consult Factory
NOTES:
1 Integral pilot light and test switch standard. Note: Remote pilot light and test switch
required for some fixtures in this family. Consult the Architectural Indoor downlighting
section of the Product Selection Guide for additional information.
2 Remote test switch configuration standard.
TECH-140
©2003 Gotham, Rev. 01/03
TECH-140.P65
Add to overall
housing length
for EL option
5"
5"
5"
5"
5"
4"
5"
5"
4"
6"
6"
5"
4"
5"
4"
6"
Overall housing
width with
EL option
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
18"
Download