Reflex Plus - Centurion Safety Products

advertisement
PLUS
The next generation...
“Spot the difference
IT
EMARK
TM
K
because there is one... or two, or
TM
EN 397
KM 06083
more!”
The next generation...
PLUS
All the features of the classic Reflex helmet &
more....
EXISTING
- Mid Peak to suit all applications
- Brushed Nylon Sweatband
PLUS
- High Visibility Options
- Optional Reflectors
NEW
- Strong ABS material
- Lateral Deformation
- Low Temperature -40°C
- Improved Aesthetics
Strong ABS material
- The advantage of ABS is the material combines the
strength and rigidity of the acrylonitrile and styrene
polymers with the toughness of the polybutadiene
rubber.
- The most important properties of ABS are its
impact resistance and toughness.
- ABS is considered superior due to its hardness, gloss,
toughness, and electrical insulation properties.
Two tone helmet
- A choice of shell and/or rear flash in high
visibility Yellow or Orange for added
wearer security during poor light
or dark conditions
- Two part helmet allows for
corporate colour choices
(specific non standard
corporate colours
available)
One helmet for both
Summer and Winter
- Unique Venturi system provides ventilation
as standard
- VentPlugs available to close off
the ventilation when not
required
Lateral Deformation
- Provides a level of protection against lateral
compression, indicating improved side strength
of helmet.
Choice of helmet and rear flash colours with
Red or Clear clip-on reflectors
- Test Method: A pressure of 43kg is applied to the
sides of the shell for 5 minutes and then the amount
of helmet deformation is measured.
UK Patent PCT/GB08/03512
Optimum wearer
comfort
Low Temperature -40°C
- Comfortable internal Textile cradle
- Standard sweatband
- The helmet provides EN 397 protection when
worn at or above this temperature.
- Test Method: The mandatory shock absorption and
penetration resistance tests are repeated at stated
low temperature.
Approved to EN 397, EN 50365
-40°C
MM
LD
ANSI/ISEA Z89.1-2009 Type 1 Class C LT
PLUS
The next generation...
Description
Reflex Plus with High Visibility Rear Flash
Reflex Plus High Visibility Shell & Rear Flash
Reflex Plus with Silver Rear Flash
Reflex Plus as above with Ratchet
Code
S12PLUS*HVY/OA
S12PLUSHV*HV*A
S12PLUS*SA
S12PLUS**R
* Denotes colour of helmet (ie. W for White)
All available colour options
Shell
Rear Flash
W
B
R
Y
HVY
TM
O
HVO
G
K
HVY HVO LB
S
accessory slot accepts
TM
accessory clips or approved 30mm clips
#
# All Centurion branded accessories are compatible and CE approved to fit onto Centurion safety helmets. Centurion accepts no liability for any damage caused by the fitting of
other brands of accessories. Please contact the relevant accessory manufacturer direct for their opinion of the combination compatibility and confirmation of CE approval.
Reflex Plus Head Protection Standards and Options
Standard
EN 397:1995 (incl A1)
EN 397:1995 (incl A1)
EN 397:1995 (incl A1)
EN 397:1995 (incl A1)
ANSI/ISEA Z89.1- 2009
EN 50365:2002
EN 397:1995 (incl A1)
Symbol
MM
-30°C
-40°C
LD
Class C
LT
-
Explanation
Molten Metal
Low Temperature Performance
Low Temperature Performance (currently outside the scope of EN 397:1995)
Lateral Deformation
American National Standard for Industrial Head Protection
Low Temperature
Electrically insulating helmets for use on low voltage installations (1000V a.c.)
All helmets perform to +50°C and -10°C
Centurion Safety Products Ltd
Howlett Way, Thetford
Norfolk, IP24 1HZ, England
Telephone: 01842 754266
Customer Hotline: 01842 855045
Facsimile: 01842 765590
www.centurionsafety.co.uk
Email: sales@centurionsafety.co.uk
Distributor
Made in the UK
RPLUSLEAFA4 01/2012
Download