Power System
CEE ODTT-24/250 DeadBreak Bushing Insert
Up to 24kV,250Amp Class
General:
The CEE ODTT-24/250 Deadbreak Bushing Insert threads
into a universal bushing well to provide the same function as
an one piece bushing. Bushing inserts and elbow connectors comprise the essential components of all deadbreak
connections. When mated with a comparably rated product,
the bushing insert provides a fully shielded and submersible
connection for deadbreak operation, so that ensure to make
field installation and replacement possible, efficient and
convenient.
The deadbreak bushing Insert is molded using high quality
peroxide-cured EPDM insulation and widely used in the
CEE ODDT-24/250
250A plug-in termination of the padmounted transformers,
submersible transformers and switching cabinets.
No special tools are necessary. The insert can be installed
by hand. An internal hex broach allows for positive torque
controlled installation. Using the optional installation torque
Electrical Characteristics:
tool the bushing insert can be properly tightened into the
Voltage Ratings and Characteristics
bushing well stud.
kV
Standard Voltage Class
24
Maximum Rating Phase-to-ground
12
AC 50 Hz 5 Minute Withstand
54
DC 15 Minute Withstand
48
BIL and Full Wave Crest
125
20kV partial Discharge(not more than)
10pc
DIMENSIONS(mm)
47
32
48
Description
bushing well without the fear of accidentally breaking the
Continue
132
Amperes
17.5
Description
27
Current Ratings and Char acteristics
250A
10,000 A rms symmetrical for
Short Time
0.2s 3,500 A rms symmetrical
for 3.0 s
Electrical characteristics are in accordance with or
exceed DIN 47636 and IEC 60502.4-1997s
standards.
3/8¡å
44.5
66
Power System
Main Packaging List:
1
Deadbreak Bushing Insert
4
Quality certificate
2
Silicone Lubricant
5
Cleaning Paper
3
Installation Instruction Sheet
Ordering Information:
To order a 250 amps,24 kV Deadbreak Busing Insert, Please refer to the CODE INFORMATION and select the proper catalog No. Below.
Catalog No.
Voltage Rating(kV)
Current Rating(Amps)
24
250
CEE ODTT-24/250
Code Information:
CEE
ODTT -
/ 250
Current Rating (amps)
Voltage Rating (kV)
Deadbreak Bushing Insert
China Electric Equipment
Typical Arangement:
200amps Bushing Well+250amps Deadbreak Bushing Insert
354
More Information for cable accessories,installation instructions,technic questions,Please contact
your local CEE power system representative or visit our website http://www.ceepower.com.