De
ce
be
m
r‘
08
PXI SHORTFORM FRONT PAGE
CONTENTS
NEW PXI PRODUCTS
Page 4, 5
PXI SHORTFORM CATALOG INTRODUCTION
Page 6
PXI CHASSIS AND REMOTE CONTROLLERS
Page 7
PXI INSTRUMENT & UTILITY MODULE SELECTION GUIDE
Page 8
MULTIMETERS
Page 9
WAVEFORM GENERATION
AND ACQUISITION
Page 10
AMPLIFIERS AND ATTENUATORS
Page 11
POWER SUPPLIES
Page 12
PROGRAMMABLE RESISTORS
Page 13
PRECISION PROGRAMMABLE
RESISTORS
Page 14
DIGITAL I/O, PROTOTYPING
& SWITCH SIMULATORS
Page 15
BUS INTERFACES
Page 16
PXI INSTRUMENT
AND UTILITY
MODULES
pickering
2
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
PXI SWITCHING MODULE SELECTION GUIDE
GENERAL
PURPOSE
MATRIX
Page 17, 18, 19
LOW DENSITY REED RELAY
Page 20
HIGH DENSITY RELAY
Page 21
MEDIUM POWER RELAY
Page 22
HIGH POWER RELAY
Page 23
HIGH VOLTAGE SWITCHING
Page 24
LOW DENSITY MATRIX
Page 25
MEDIUM DENSITY MATRIX
Page 26
HIGH DENSITY MATRIX
Page 27
POWER MATRIX
Page 28
LARGE MATRIX
Page 29, 30, 31
2 AMP LARGE MATRIX
Page 32
FAULT INSERTION MATRIX
Page 33
FAULT INSERTION SWITCH
Page 34
LOW DENSITY MULTIPLEXER
Page 35
HIGH DENSITY MULTIPLEXER
Page 36
POWER MULTIPLEXER
Page 37
SOLID STATE MULTIPLEXER
Page 38
RF SWITCHING
Page 39, 40
MICROWAVE SWITCHING
Page 41
OPTICAL SWITCHING
Page 42
TELECOMS/DIFFERENTIAL
SWITCHING
Page 43
ARINC 608A SWITCHING
Page 44
SOFTWARE SUPPORT
Page 45, 46
PXI MATRIX TEST TOOL PI-MXT
Page 47
PXI APPLICATIONS INFORMATION
Page 47
PXI ACCESSORIES
Page 48, 49
FAULT INSERTION
MULTIPLEXER
RF AND
MICROWAVE
OPTICAL
SPECIAL
PURPOSE
SOFTWARE
SUPPORT
6U PXI SWITCHING MODULES
Page 49
OTHER SWITCH AND INSTRUMENT SYSTEMS
Page 50, 51
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
3
NEW PXI PRODUCTS FROM PICKERING INTERFACES
NEW The latest
addition to the 40560 Large Matrix
range, the BRIC2 has
all the options of the
larger modules and
occupies 2 PXI Slots.
See page 29.
NEW Also new to the 40-560
NEW 40-566 2 Amp Large Matrix. A 2-pole
integrated matrix module with a Y size of 4 and
X sizes between 55 and 385. See page 32.
Large Matrix range are solid
state versions of 8-wire Y-bus
matrices, available in BRIC2, 4
and 8 formats. See page 29.
NEW 40-190 Fault Insertion Switch range. Available with channel counts up to 64 and current handling
from 1A to 20A these are ideal for aerospace/automotive fault testing. See page 34 for details.
How To Use The Pickering PXI Short Form Catalog
Choose the PXI products of interest to you, then for further technical and pricing details please visit our web
site: www.pickeringtest.com You can easily find specific product information by accessing:
* Product directories, to browse the range.
* Search facility (using familiar Google-style searching).
Here you will find comprehensive datasheets, manuals, application notes, prices, drivers, forums, etc. on all
Pickering PXI products. Please contact any of our sales offices for additional literature or to discuss your
application with a sales engineer.
pickering
4
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
NEW PXI PRODUCTS FROM PICKERING INTERFACES
NEW The 40-870 and 40-830 Range of 50Ω and 75Ω RF Switch modules are available as SPDT switches,
multiplexers and matrices with a frequency range of up to 3GHz. See page 39.
NEW 40-680 and 40-682 Solid
State Multiplexer modules.
These feature fast operate time
and no wearout mechanism.
See page 38 for details.
NEW The 40-260 Precision
Programmable Resistor range
offer high accuracy and high
setting resolution. Versions are
available for RTD and strain gauge
simulation See page 14.
pickering
NEW ARINC 608A switching modules for avionics testing.
The range includes Resource Distributor/Bus Matrix modules and a
Source Switching module. See page 44
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
5
PXI shortform catalog introduction
Pickering Interfaces are Sponsor members of the PXI
Systems Alliance and a leading innovator in the development
of PXI products. We provide the widest range of PXI
switching solutions from any vendor with over 600 modules
available. Each model is available in a variety of densities
to suit different applications. Our products have set the
benchmarks by which others judged, providing the densest
and highest performance solutions available in PXI.
Our PXI modules can be installed in any PXI compliant
chassis and are supported in all the popular software
environments used in PXI systems through the provision of
Kernel, VISA and IVI drivers.
40-560 BRIC8 High Density Matrix Module
Pickering Interfaces switch modules offer the densest
switching solutions available, whether in single slot or
multi-slot modules. We use only high quality relays that
have been tested to ensure their suitability for the module
they are used in. All reed relays are manufactured by our
sister company Pickering Electronics using instrument grade
reeds to ensure a long service life and repeatable contact
performance.
Our award winning BRIC modules provide solutions for
larger switching applications requiring matrices, fault
insertion capabilities or microwave switching.
Pickering Instruments Modules provide a range of solutions
for waveform generation, power supplies, RF attenuators
and bus analyzers.
Our PXI Chassis are fully PXI compliant and support all
Pickering’s PXI modules as well as those from third parties.
There is a choice of 8, 14 and 18 slot 3U chassis with
options to reduce acoustic noise and versions that can be
powered from a DC source.
For further information on our PXI product range visit www.
pickeringtest.com where you can download this and other
catalogues, obtain electronic copies of data sheets, manuals,
software drivers and regional pricing for our products.
Ever Wondered What PXI Is All About?
Pickering has published a 160 page
book explaining PXI basics and provides
useful data for engineers working on
Functional Test Systems. Now in its 4th
edition, the book contains examples
of test systems based on the PXI
standard, useful contact information
and engineering data.
Copies can be obtained free of charge
by contacting your local Pickering
Interfaces sales office or by filling in
the enquiry form on our web site:
www.pickeringtest.com/pximate
pickering
6
41-210 7½ Digit
DMM Module
40-541 Ultra High
Density Matrix Module
40-515
Low Cost
2 Amp
Matrix
Module
40-659 Bank 8 Channel
2 Pole Multiplexer
Module
40-595 10 Amp FIBO BRIC Matrix for
Fault Insertion Applications
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
PXI CHASSIS AND REMOTE CONTROLLERS
● High Performance PXI Chassis Available
with 8, 14 or 18 Slots
● Range of AC/DC Input Voltage Options
● Optional 3-Speed or Low Acoustic
Noise Fans
● Desk or Rack Mountable
Pickering Interfaces has a range of high
performance PXI chassis ranging from 8 to 18
3U slots. All chassis are available with optional
low acoustic operation, suitable for office,
laboratory or other environments where low
audible noise is essential. The chassis can be
optimized for BRIC integrated matrix modules
which utilize unused slot space, for example,
a BRIC8 can be installed in the 8-slot 40-908
(see picture).
40-918 High Performance 18-Slot PXI Chassis
Pickering can pre-configure your PXI modules
and ship them pre-installed in our 8, 14
or 18 slot PXI chassis to exact customer
requirements, this is done free of charge,
please contact the sales office to discuss your
requirements.
40-908 8-Slot PXI Chassis With BRIC8 Module Installed
● PCI to PXI Interface Kit
● High Speed Data Exchange From Desk
Top Controller To PXI Chassis
● Save Space and Cost by Controlling Two
Chassis From a Single PCI Card
● Available as Separate Cards or as a Kit
The 41-921 Control Interface Kit provides a
seamless connection between a control PC’s PCI
interface and a PXI chassis, so giving your PC
direct control of PXI/CompactPCI via a software and
hardware transparent link. The 41-921 and 51-921
enable you to use a PC instead of an embedded
computer to control your PXI/CompactPCI modules,
reducing your overall system cost.
Description
Power
Supplies
8 Slot PXI Mainframe
2 x 175W
14 Slot PXI Mainframe
2 x 175W
18 Slot PXI Mainframe
4 x 175W
PCI to PXI Control Interface Kit
—
PCI Control Interface Card
PXI Control Interface Module
pickering
41-921 PCI to PXI Control Interface Kit
Input Voltage
Options
Cooling Fans
Cooling Fan
Options
Order Code
40-908
4
Standard or
3-Speed or
Low Acoustic
Noise.
—
—
—
41-921-001-KIT
—
—
—
—
51-921-001
—
—
—
—
41-921-001
90-264Vac or
18-36Vdc or
36-72Vdc
3 (optionally 4)
4
40-914
40-918
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
7
PXI instrument & UTILITY Module Selection guide
Pickering Interfaces offers a range of PXI instrumentation and utility modules that compliment the range of switching
modules. The range includes multimeters, amplifiers, attenuators, digitizers, function generators and programmable
resistors. All instrument and utility modules are supplied with Visual Basic and LabVIEW Soft Front Panels which
display the module’s controls in a graphical format.
Description
Multimeters
A range of 6½ and 7½ digit DMM’s
with the characteristics and functionality
normally associated with high quality bench
instruments.
9
Function Generators
A 3 channel 10MHz function generator and
100Ms/s Arbitrary Waveform generator.
10
Digitizer
A dual channel 70MHz 14-bit digitizer.
10
Attenuator
A 3GHz step attenuator and high voltage
attenuator for lower frequency applications.
11
Amplifier
Boost you PXI signal levels with an amplifier
that helps you simulate real life signals.
11
Power Supplies
A range of power supplies powered from the
PXI back plane or an external source in fixed
and adjustable formats.
12
Battery Simulator
Capable of sinking or sourcing current,
primarily for cell phone testing.
12
Programmable Resistors
Available in selectable resistor format with
a maximum of 48 channels, or as fully
programmable resistors with a maximum of
10 channels each with 16-bit resolution.
13
Precision Programmable Resistors
For applications that require High accuracy
and high stability with fine setting resolution.
14
Digital I/O & Prototyping
Can be supplied with TTL, open collector,
or optically isolated interfaces. Versions are
available with a prototyping board area.
Also, a relay driver module is available.
15
41-210
DMM Module
41-620
Function
Generator
41-180
Attenuator
41-650
Amplifier
Switch Simulator
Designed to simulate dirty switch contacts
for automotive test applications.
15
Bus Interface Modules
For testing and simulating automotive and
avionics buses
16
pickering
8
Page
40-295
Programmable
Resistor
41-742
Programmable
Power Supply
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Multimeter Modules
Multimeter modules
● Versatile Range of DMM Modules With a
Selection of Feature Sets
● Available With 6½ or 7½ Digits
● 300V Isolation Barrier
● Up To 20,000 Readings per Second
● 4 and 6 Wire Resistance Measurements
● Voltage Current and Pulse Sources
● Inductance and Capacitance Measurement
● Occupy Single 3U PXI Slot
● VISA and Kernel Support For PXI Environments
● Complies with PXI and CompactPCI Specifications
The Pickering Interfaces offer range of PXI DMM’s that match
the performance and feature set of bench instruments, but
occupy just one slot of PXI chassis. The 6½ and 7½ digit
models offer a variety of versions with advanced features
such as 6-wire guarded measurements, capacitance and
inductance measurements and frequency measurements.
Some models can provide DC/AC voltage sources and pulse
generation. A Measurement speed of up to 20000 samples
per second is achieved by the 7½ digit version.
41-210 7½ Digit
DMM Module
With 5 models to choose from the Pickering Interfaces allows
users to select the most cost effective solution for their
application
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
pickering
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Max Readings/Second
✔
DC Current Source
✔
AC/DC Voltage Source
✔
Leakage
✔
AC Peak-Peak/AC Crest Factor
/AC Median
✔
Inductance
Temperature
✔
Capacitance
Diode Test
✔
6-Wire Resistance
2-Wire/4-Wire Resistance
7½ Digit Multimeter
AC RMS Voltage/Current
6½ Digit Multimeter
DC Voltage/Current
Card Configuration
Frequency
Example of the Soft Front Panel Supplied with the
41-200 6½ Digit DMM Module
Please note: These multimeter modules are supplied on
behalf of Pickering Interfaces by Signametrics Corporation.
Order Code
1000
41-200-040
1000
41-200-042
1000
41-200-044
1400
41-210-060
20000
41-210-064
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
9
Waveform Generation and
Acquisition Modules
Waveform generation and Acquisition
● Range of Waveform Generators and a Digitizer
Module
● 70Ms/sec Digitizer
● 100Ms/sec Arbitrary Waveform Generator
● 3 Channel Function Generator to 10MHz
● Occupy Single 3U PXI Slot
● VISA and Kernel Support For PXI Environments
● Complies with PXI and CompactPCI Specifications
The Pickering range of PXI instruments includes waveform
generators suitable for producing waveforms for the
emulation of sensors or the stimulation of external systems.
The 41-610 is a Dual Arbitrary Waveform Generator with
clock rates up to 100Msamples/sec and 14-bit converter
resolution. Low timing skew between the channels makes
it ideal for applications that require two high quality signals
with closely matched timing requirements. Waveforms
can be created from the embedded waveform library or
imported as files from external software tools.
41-620 Function
Generator Module
The 41-620 Function Generator is supplied with 3 channels
and is capable of generating sine waves up to 10MHz. As it
implements a simple method of frequency generation using
Direct Digital Synthesis it is easier to use than an ARB for
the creation of repetitive waveforms.
As well as waveform generation Pickering’s instrument
range includes a Digitizer Module suitable for the capture
of analog signals for digital analysis. The 41-320 is a dual
channel 14-bit digitizer with a maximum sample rate of
70MHz and can be used with common mode or singleended input signals.
All the connectors used by these modules are supported by
a comprehensive range of cable and connector accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at
www.pickeringtest.com
Card Configuration
Channels
Maximum
Frequency
Maximum
Voltage
ADC/DAC
Resolution
Memory
Size
Order Code
Digitizer Module
2
50MHz ±2dB
±25V common
mode input
14-bit ADC
512k per
channel
41-320-001
Arbitrary Waveform Generator
Module
2
100Ms/s
14-bit DAC
512k per
channel
Function Generator Module
3
10MHz
10-bit DAC
256k per
channel
pickering
10
The Soft Front Panel For the 41-320 Waveform Digitizer
Module Shown Capturing an Amplitude Modulated Signal
5Vp-p output
2Vp-p output
10Vp-p output
41-610-001
41-610-002
41-620-003
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Amplifier and Attenuator Modules
Amplifiers and Attenuators
● Range of High Voltage Amplifiers and
Attenuators and a High Frequency Attenuator
● Attenuate High Voltage Signals
● Generate 60V Peak to Peak Output Signals
● Multiple Channels on a Single Module
● Occupy Single 3U PXI Slot
● VISA and Kernel Support For PXI Environments
● Complies with PXI and CompactPCI Specifications
It is not unusual for test systems to generate high voltage
signals incompatible with the instrumentation capability
in a PXI system. It is also not unusual for tests systems to
be incapable of generating large enough voltage swings
to simulate sensors or other devices that stimulate a
device under test. The PXI chassis power supplies limit the
capability of PXI devices to generate high voltage signals
without space consuming power supply conversion.
Pickering offers PXI solutions for both these problems.
The 41-180 is an accurate DC to 3GHz programmable
attenuator that has a 1dB step resolution, allowing it to
adjust signal amplitudes for optimum measurement by
other devices.
41-650 High Voltage
Amplifier Module
The 41-660 provides a convenient way of attenuating
high voltage low frequency signals to levels that can be
captured by other PXI devices without risk of damaging
them.
The 41-650 provides a convenient solution for increasing
the signal amplitude from waveform or function
generators to permit them to simulate real life sensors.
All the connectors used by these modules are supported
by a comprehensive range of cable and connector
accessories.
For more information on these modules please refer to
the individual data sheets or visit our web site at
www.pickeringtest.com
Card Configuration
Programmable Attenuator
High Voltage Attenuator
Channels
1
2
10
5
41-180 3GHz Programmable
Attenuator Module
Frequency
Maximum
Attenuation
3GHz
63dB
Maximum
Gain
SMA Sockets
—
20kHz
160 times
5 (600Ω i/p
impedance)
High Voltage Amplifier
1MHz
5 (10kΩ i/p
impedance)
pickering
Signal
Connectors
—
20 times
Order Code
41-180-021
41-180-022
50-way
D-type
41-660-001
25-way D-type
41-650-001
SMB
41-650-002
25-way D-type
41-650-011
SMB
41-650-012
41-661-001
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
11
Power Supply M
­ odules
Power Supply Modules
● Range of Fixed or Variable Power Supply Modules
● Battery Simulator Module Capable of Sinking or
Sourcing Current
● Fixed Supplies Have up to 4 User Specified Output
Voltages
● Variable Supplies Can Deliver up to 48V Per
Channel With 2A Maximum Current
● VISA and Kernel Support For PXI Environments
● Complies with PXI and CompactPCI Specifications
The 41-720 range of Fixed Power Supply modules provides the
user with up to 4 separate voltage outputs isolated from the
PXI backplane. Any combination of 3.3V, 5V, 12V or 15V can be
specified with a maximum current capability of 4A for the 3.3V
option. Software provides on/off control and status monitoring
for each output.
Programmable Power Supplies provide voltage outputs which
are fully adjustable under software control. The 40-735 delivers
positive 10V and the 40-736 delivers negative 10V, both with
a maximum current of 1A. The output voltage can either be
derived from the PXI chassis supply or from an external source.
41-720 Isolated
Power Supply
Module
The 41-740/741 are dual Programmable Power Supplies and
can deliver up to 48V at 2A. They are fed from an external AC
mains, or DC 56V supply.
The 41-750 and 41-751Battery Simulator modules are
designed to simulate the power supplies of portable battery
powered equipment and is particularly suitable for cell phone
testing. They can source current to simulate a battery supply or
sink current to simulate a battery under charge.
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at
www.pickeringtest.com
Card Configuration
Channels
Input Voltage
Output Voltage
Max Current
Order Code
Isolated Power Supply
4 max
5V from PXI Backplane
Choice of 3.3V, 5V,
12V or 15V
4A (3.3V
option)
41-720
+10 Volt Programmable
Power Supply
2
+12V from PXI Backplane
or external supply
Adjustable 0 to +10V
1A Per
Channel
41-735-001
-10 Volt Programmable
Power Supply
2
-12V from PXI Backplane
or external supply
Adjustable 0 to -10V
1A Per
Channel
41-736-001
2
+56V DC
2
90-260V AC
Adjustable 0 to 48V
2A Per
Channel
Programmable Power
Supply
Battery Simulator Module
pickering
12
41-750 Battery Simulator Module
1
5V from PXI Backplane
Adjustable 0 to 6V
41-740-001
41-742-001
2.8A Source,
0.5A Sink
41-750-001
1A Source,
0.25A Sink
41-751-001
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Programmable Resistor Modules
Resistor modules
● Versatile Range of Resistor Modules Including
Programmable Resistors and Potentiometers
● Fully Programmable Versions With Resolution of
Up to 24-bit
● Resistance Range From 0 to 16MΩ
● Low Cost Fixed Value Selectable Resistor
Versions With User Defined Values
● All Versions Use High Reliability Pickering
Ruthenium Reed Relays
● Occupy Single 3U PXI Slot
● VISA and Kernel Support For PXI Environments
● Complies with PXI and CompactPCI Specifications
The range of programmable resistor modules includes fully
programmable resistor and potentiometer modules for
applications that require fine adjustment with a resolution
of up to 24-bit. Also in the range are selectable resistor and
potentiometer modules. These consist of fixed resistor values
pre-defined by the user which can be switched in and out of
circuit with reed relays.
40-280 Selectable
Resistor Module
Vin
R1
OUT
24 or 48
Dual Selectable Resistors
12 or 24
Fixed Value Potential Dividers
12 or 24
Programmable Resistors
Programmable Resistors + SPDT Relays
Programmable Resistors
Programmable Resistors + SPDT Relays
Dual
R1
R3
R4
Resolution
Resistance
Range ‡
—
User
Specified
16-bit
Max Resistor
Power
Front Panel
Connector
0.5W
96-way
SCSI plug
0.5Ω to
32kΩ
R7
R8
Order Code
†
8-bit
40-281
40-282
40-290
0.5Ω to
128Ω
68-way
SCSI plug
40-291
0 to 255Ω
0 to 4kΩ
0 to 65kΩ
3 or 6
24-bit
0 to 16MΩ
5 or 9
8-bit
0 to 255Ω
12-bit
0 to 4kΩ
16-bit
0 to 65kΩ
24-bit
0 to 16MΩ
1 or 3
R6
40-280
12-bit
2 or 4
R5
Example Resistor Chain as used
on Programmable Resistor Modules (8-bit chain shown)
16-bit
5 or 10
Programmable Potentiometers
R2
1W
Quad
40-282 Potential Divider
R offset
10 or 18
Programmable Resistors
Vref
40-281 Dual Resistor Card
Fixed Value Resistor Configurations as used on
Selectable Resistor Modules
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Fixed Value Selectable Resistors
Vout
OUT
40-280 Single Resistor Card
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
Number of
Channels
Roffset
IN
R2
All modules are based on high quality ruthenium reed relays
that provide a very long service life and consistent contact
operations at all rated switching levels.
Resistor Card
Configuration
R
R
IN
40-295
0.5W
37-way
D-type
40-296
‡ Most modules can be offered with alternative resistance range, for more information contact Pickering Interfaces
† For the full order number and configuration codes for each variant, please refer to the data sheet.
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
13
NEW Precision Programmable
Resistor Modules
PRECISION Resistor modules
● Precision Variable Resistors With a Choice of
Resistance Ranges
● Very High Accuracy and Stability
● Fine Setting Resolution
● Low Thermo-Electric EMF
● Simple Calibration With an External DMM
● Occupy Single 3U PXI Slot
● VISA and Kernel Support For PXI Environments
● Complies with PXI and CompactPCI Specifications
This range of programmable resistor modules feature high
setting resolution with excellent stability and accuracy through
the use of innovative switching networks and software
correction techniques. This also means all resistance values
can be set - there are no missing values due to switch
resistance or resistor tolerance.
40-260 Precision
Programmable
Resistor Module
The resistor channels and calibration port occupy separate
connectors on the module’s front panel. All connectors are
supported by a comprehensive range of cable and connector
accessories.
They are ideal for simulation of sensors that require very
fine adjustment and also have the capability of being set as
open or short circuit to simulate faults in cabling systems.
The range includes modules specifically designed for RTD and
strain gauge simulation.
New versions of the precision resistor cards are being
regularly introduced, please contact your local sales office for
more details.
The modules incorporate a system for the calibration of
each channel using a DMM connected to the Calibration Port
For more information on these modules please refer to the
on the front panel. Calibration can be performed with the
individual data sheets or visit our web site at:
UUT connected to the module and multiple modules can be
cascaded and calibrated with a single DMM (this does not
www.pickeringtest.com
apply to the 40-297 which
uses the same connector for
RESISTOR CHANNEL
CALIBRATION PORT
the UUT and calibration).
CONNECTOR
CONNECTOR
CHANNEL 2
CHANNEL 3
CHANNEL 1
Diagram for 40-260
Three Channel Precision
Programmable Resistor
Modules
COARSE
ADJUST
FINE
ADJUST
CALIBRATION
MUX
Number of
Channels
Resolution/Accuracy
Resistance Range ‡
3
<10mΩ / 0.1%
90Ω to 8kΩ
2
<2mΩ or <15mΩ/0.1%
1.5Ω-2.9kΩ or 10Ω-36kΩ
RTD Simulator
6 or 18
2mΩ / 0.1%
90Ω-250Ω or 900Ω-2500Ω
Strain Gauge Simulator
1 to 6
2mΩ / 1%
350Ω Bridge
40-265
18
1Ω / 0.2%
1Ω to 230Ω
40-297-001
9
0.25Ω / 0.2%
2Ω to 13.5kΩ
6
0.125Ω / 0.2%
3Ω to 1.5MΩ
Resistor Card Type
Precision Programmable
High Density Precision
Programmable
Max Resistor
Power
Order Code
†
40-260
100mW
500mW
40-261
40-262
40-297-002
40-297-003
‡ Most modules can be offered with alternative resistance range, for more information contact Pickering Interfaces
† For the full order number and configuration codes for each variant, please refer to the data sheet.
pickering
14
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Digital I/O, Prototyping & Switch
Simulator Modules
Digital I/O modules
IN 32
IN 2
IN 1
OUT 32
OUT 2
OUT 1
● Versatile Range of Modules Incorporating Digital
Input/Output Functions
● Versions With Breadboard Area for Prototyping
● Versions With Optically Isolated Input/Output For
Interfacing to Electrically Noisy Environments
● TTL Inputs and Outputs Suitable for Interfacing to
External Logic
● Open Collector Transistor Output Versions Suitable
for Driving Internal or External Relay Coils
● Switch Simulator Modules are Designed for Dirty
Contact Emulation in Automotive Test Applications
● VISA and Kernel Support For PXI Environments
● Complies with PXI and CompactPCI Specifications
40-220 Digital
I/O Module with
Prototyping Area
Optically isolated versions are intended for input-output
functions in electrically noisy environments. All inputs and
outputs share a common ground and have an isolation barrier
of 500V DC. Power for the isolated input/output circuit can
be supplied by the user or supplied by an optional on-board
DC-DC converter.
Digital I/O Module with 32-bit Input and
32-bit Output (40-220)
This range of Digital I/O Modules are suitable for operating
external devices, or for interfacing with external logic. Two
choices of output driver are available: TTL for interacting with
external logic and Open Collector Transistor for operating
external devices with voltages to 50V DC and currents to
500mA.
Switch Simulator Modules are designed for automotive test
applications. They can simulate contaminated contacts or
current leakage conditions enabling the correct operation of
I/O devices to be tested.
The versions that incorporate a breadboard area allow the
user to construct their own circuits for applications where a
standard module is not available.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Card Configuration
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
Number of Channels
Breadboard Module with I/O
32 TTL I/P
Breadboard Module without I/O
—
Digital Input/Output Module
32 TTL I/P
Relay Driver Module
Prototyping
Area
Number of
Slots
652cm
0.1” grid
1
32 TTL O/P
—
2
32 TTL O/P
Optically Isolated Digital I/O Module
No DC-DC converter
Order Code
96-way
40-220-001
—
96-way
32 O/C O/P
64 relay drive channels
Optically Isolated Digital I/O Module
With on board DC-DC converter
Front Panel
Connector
78-way
16 I/P
40-225-002
40-410-001
40-410-002
40-411-001
40-490-001
16 I/P
16 TTL I/P
40-225-001
32 O/P
—
1
68-way
8, 16 or 32 channel
Dual Automotive Switch Simulator
Single or dual 8 or 16 channel
40-490-002
40-491-002
16 TTL I/P
Automotive Switch Simulator
40-491-001
37-way
40-480†
40-485†
† For the full order codes for each variant, please refer to the data sheet.
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
15
Bus Interface Modules
BUS Interface modules
● Range of Automotive and Avionics Interface
Modules
● ARINC 429 Interface Module With 2, 4 or 8
Channels
● Automotive Protocol Communications Module
Supports All Major Standards
● Analyzer Module For Testing 1553 Avionics Bus
● Occupy Single 3U PXI Slot
● VISA and Kernel Support For PXI Environments
● Complies with PXI and CompactPCI Specifications
Pickering offers a range of interface modules for
communicating with a wide variety of serial data standards
found in automotive or aviation control systems.
For the testing and simulation of vehicle ECUs the 41-500
can communicate with all the major industry standard
protocols. In addition hardware upgrades can be added
for the support of future protocols or variations of existing
ones. A maximum of 10 channels can be supported.
41-553 Bus
Analyser Module
For communication with commercial avionics systems the
41-429 module allows the user to transmit and receive
data over ARINC 429 databuses. Up to 8 channels can be
supported and the module can be supplied with an easy to
use graphical interface.
The 41-553 is a bus analyzer can operate as a Bus
Controller, Remote Terminal and a Monitor for MIL-STD1553 avionics buses. It can provide single or multiple
terminal simulation and can be used for selectively injecting
protocol errors. Powerful and easy to use databus analyzer
software can be supplied with the module.
All the connectors used by these modules are supported by
a comprehensive range of cable and connector accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Card Configuration
Automotive Protocol
Communications Module
41-500 Automotive Protocol Module
Maximum
Channels
Supported Protocols
Signal
Connectors
Order Code
10
All CAN Configurations.
UART Protocols (LIN 2.0,
KPW2000 ISO9141, J1708 etc)
All Variants of J1850.
IIC, SPI and other customer
specific protocols.
44-pin D-type
41-500-001
41-429-002
2
ARINC 429 Interface Module
4
ARINC 429
25-pin D-type
41-429-008
8
1553 Bus Analyzer Module
pickering
16
1, Single Function
1, Multi Function
41-429-004
MIL-STD-1553A/B
Twinax BJ77
41-553-001
41-553-002
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
PXI SWITCHING Module Selection guide
A large variety of 3U PXI switching modules are available from Pickering Interfaces. The modules can be supported by
any PXI compliant chassis, such as the Pickering 40-908, 914 or 918. If an LXI environment is preferred the majority
of Pickering’s PXI switch modules can be fitted to Pickering’s 60-102 (7-Slot) or 60-103 (18-slot) chassis.
M
ay
TS
LXI PRODUC
FACES
RING INTER
FROM PICKE
‘0
8
&
ice
d Pr l
aile nica
Det Tech ation
rm
.com
Info n-Line test
O ring
icke
w.p
w
w
DIRECT SALES
Pickering Interfaces
Road
Stephenson
Clacton-on-Sea
CO15 4NL
United Kingdom
Inc.
Pickering Interfaces Street
Vine
2900 Northwest
Grants Pass
Oregon 97526
0700
Tel: +1 541 471
471 8828
Fax: +1 541
ickeringtest.com
e-mail: ussales@p
Inc
Pickering Interfaces Office)
Regional
(East Coast
Suite 300
12 Alfred Street
etts 01801
Woburn Massachus
USA
1710
Tel: +1 781 897
897 1701
Fax: +1 781
@pickeringtest.com
e-mail: useastsales
PICKERING
INTERFACES
Ltd.
900
Tel: +44 (0)1255-687 349
Fax: +44 (0)1255-425
eringtest.com
e-mail: sales@pick
USA
Sarl
Pickering Interfaces
Blanche
6 Rue de la Mare
77186 Noisiel
Marne-la-Vallée
France
53 55 50
Tel: +33 1 60
53 55 99
Fax: +33 1 60
keringtest.com
e-mail: frsales@pic
s.r.o.
Pickering Interfaces
Smetanova 525
ˇ
Trinec
739 61
Czech Republic
339 168
Tel: +42 0558
340 888
Fax: +42 0558
ickeringtest.com
e-mail: cesales@p
GmbH
Pickering Interfaces
weg 34
Magdalenen
D-85551
Kirchheim
Germany
79 28 59 (Sales)
Tel: +49 89 92
86 15 37
Fax: +49 89 92
ickeringtest.com
e-mail: desales@p
GmbH
Pickering Interfaces
33
Am Mitterfeld
D-85622
Weißenfeld
Germany
Sales)
49 294 (Technical
Tel: +49 89 235
49 292
Fax: +49 89 235
ickeringtest.com
e-mail: support@p
pickering
SUPPORT OFFICE
Co. Ltd
Engineering
# 11
MTCS Systems
Cheng Plaza
Block C1, Yi
District
Room 1905,
Qiao Rd Haidian
Chang Chun
Beijing 100089
OFFICES
AB
Pickering Interfaces 31
väg
Karl Nordströms
432 53
Varberg
Sweden
06 69
Tel: +46 340-69
06 68
Fax: +46 340-69 ickeringtest.com
e-mail: ndsales@p
6565
Telephone: 86-10-58816566
Fax: 86-10-5881- s.com.cn
e-mail: sales@mtc
om.cn
www.mtcs.c
Website URL:
20th Anniversary
faces
Pickering Inter
China
N-1
7AL-61-SF-08-E
pickering
pickering
Pickering
Switch On to
test.com
www.pickering
pickering
Pickering
Switch On to
test.com
www.pickering
60-102 and 60-103 Chassis Can Support PXI Modules Through an LXI Compliant Interface
For full details of Pickering’s LXI chassis refer to the LXI Short Form Catalog
For an overview of the LXI Standard refer to Pickering’s LXImate
The following information provides a convenient way of selecting from the large number of modules available the
product most suited for your application. From the table below select the short form data sheet that best describes
your requirements. Full data sheets are available for each module from our web site. Please note that some overlap
exists between module complexity (relay count), so for some applications it is worth checking short form data sheets
that cover higher or lower complexity modules.
General Purpose Relays
These modules provide an array of relays with no specific configuration enabling users to configure them to match
their specific application. They can provide the lowest cost solution for functional test applications where there is a
low likelihood of changes in the system
Short Form Data Sheet
Configurations Covered
Max Relay Count (up to)
Max Current or Voltage
Page
Low Density General
Purpose Relay Modules
•SPST, SPDT, DPST
32
1.2A/150V
20
High Density General
Purpose Relay Modules
•SPST, SPDT, DPST, DPDT
100
1A/150V
21
General Purpose Medium
Power Relay Modules
•SPST, SPDT, DPST, DPDT
80
5A/300V
22
General Purpose High
Power Relay Modules
•SPST, SPDT, DPST
12
40A
23
High Voltage Switch Modules
These modules are suitable for applications that require the routing of high voltage signals such as the insulation
testing of PCBs and cables. They are available as an array of uncommitted relays or as a multiplexer.
Short Form Data Sheet
High Voltage Switch
Modules
pickering
Configurations Covered
•SPST
•Multiplexer
Max Relay Count (up to)
24
Max Current or Voltage
1000V/4A
Page
24
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
17
Matrix Modules
A matrix is an array of relays, typically arranged as a crosspoint switch, where a number of input terminals can be
connected to a number of output terminals. Applications include the switching of signals between test equipment
and the devices under test as part of an automatic test system
Short Form Data Sheet
Configurations Covered
Max Relay Count (up to)
Max Current or Voltage
Page
Low Density Matrix Modules
•Matrix
96
2A/300V
25
Medium Density Matrix
Modules
•Matrix
184
2A/300V
26
High Density Matrix Modules
•Matrix
528
1A/150V
27
Power Matrix Modules
•Matrix
80
30A/40V or 5A/250V
28
Large Matrix Modules
•Matrix
4416
1.2A/150V
29
2 Amp Large Matrix
•Matrix
1540
2A/300V
32
Fault Insertion Switches
These are switching modules specifically designed for testing the fault tolerance of safety critical systems. The fault
insertion switch topology allows short circuits, open circuits or external faults to be inserted into the system under
test. The fault insertion matrix also allows faults to be inserted in series with the signal path.
Short Form Data Sheet
Configurations Covered
Max Relay Count (up to)
Max Current or Voltage
Page
Fault Insertion Matrix Modules
•Fault Insertion Matrix
2384
10A/250V
33
Fault Insertion Switch Modules
•Fault Insertion Switch
200
30A
34
MUX Modules
Multiplexers allow a single terminal to be connected to one of a number of other terminals. They are generally used
for signal routing in ATE systems or for signal selection in acquisition systems.
Short Form Data Sheet
Configurations Covered
Max Relay Count (up to)
Max Current or Voltage
Page
Low Density MUX Modules
•Multiplexer
•Low Thermal Switch MUX
48 to 1 MUX
1.2A/150V
35
High Density MUX Modules
•Multiplexer
198 to 1 MUX
2A/300V
36
Power MUX Modules
•Multiplexer
64 to 1 MUX
30A/40V or 10A/300V
37
Solid State MUX Modules
•Multiplexer
160 to 1 MUX
250mA/40V
38
40-541-021 Ultra High Density Matrix Module
(1-pole 66 x 8 Matrix)
pickering
18
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
RF and Microwave Switches
These are available in uncommitted relay, multiplexer or matrix formats. RF modules have bandwidths up to 3.5GHz
and are suitable for routing high frequency signals in ATE systems or for video or telecoms switching. Microwave
modules up to 65GHz and are suitable for very low loss applications such as routing signals to antenna systems.
Short Form Data Sheet
Configurations Covered
Max Relay Count (up to)
Max Current or Voltage
Page
RF Switching Modules
•Uncommitted
•Multiplexer
•Matrix
96
—
39
Microwave Switching
Modules
•Uncommitted
•Multiplexer
•Matrix
36 i/p MUX
—
41
Optical Switches
These use high performance MEMS technology for optical switching. Multiplexer or insert/bypass switch
configurations are available and the wide selection of connector types means these modules will find application in
many fiber switching and optical communications test systems.
Short Form Data Sheet
Optical Switching Modules
Configurations Covered
•Multiplexer
•Insert/bypass Switch
Max Relay Count (up to)
8 to 1 MUX
Max Current or Voltage
—
Page
42
Special Purpose Switching
Tributary switches are designed for the testing of SONET/SDH transmission multiplexers and consist of relays for
daisy-chaining signals between tributary channels and multiplexers for selecting one channel to be routed to test
equipment. The Datacoms MUX is a configurable 2-pole multiplexer suitable for the routing of high speed serial data
such as RS232 or USB. The ARINC 608A switching modules are suitable for signal routing in avionics test systems.
Short Form Data Sheet
Configurations Covered
Max Relay Count (up to)
Telecoms/Differential
Switching Modules
•Daisy chain tributary switch
•Datacoms MUX
16 channel 2 pole switch
or 36 to 1 MUX
1A/100V
43
ARINC 608A Switching
Modules
•Resource Distributor
•Bus Matrix Inputs
•Source Switching
2 x 16 channel 2 pole
Resource Distributor &
6 x 32 input 4 pole Bus
Matrix
2A/300V
44
40-785 Dual 6-Channel
Microwave Multiplexer
pickering
Max Current or Voltage
Page
40-860 MEMS Optical
Insert/Bypass Switch
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
19
Low Density General Purpose
Reed Relay Modules
General purpose reed relay
● 16, 24 or 32 Reed Relays Per Module
● SPST, DPST, SPDT and Shielded Configurations
● Ruthenium Reed Relays Suitable For Low Level
Signals
● Uses High Reliability Pickering Reed Relays For
Maximum Performance
● Fast Operating Speed 250µs Typical
● Switch up to 150Volts, 1.25A with 20W Max
Power
● Occupies a Single 3U PXI Slot
● 96-Pin Front Panel Connector
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
Pickering Interfaces range of low density general purpose
reed relay modules provide a cost effective solution for
applications where high density relays are not required.
All these modules use a 96 pin male connector that is
supported by a comprehensive range of cable and connector
accessories, ensuring they can be quickly integrated into the
user’s test system with a minimum of effort.
The relays are not committed to a particular configuration and
are available in changeover and normally open configurations.
Modules are available that use shielded reed relays to
minimize crosstalk and maximize bandwidth.
Configuration
x16
x32
x16
x32
x16
x24
x16
x16
x24
Description
The use of sputtered ruthenium reed relays allows the
modules to be used for low and medium level switching
with minimal level dependent characteristics. This provides
enhanced reliability for low level switching compared to
electromechanical or rhodium reed relays.
For more detailed information on each module please refer to
the individual data sheets or visit our web sit at:
www.pickeringtest.com
Max Switch
Voltage
Single Pole,
Single Throw
(normally open)
3W
Single Pole,
Single Throw
(normally open)
Max Switch
Current
Max Carry
Current
Order Code
0.25A
1A
40-110-121
40-115-021
Sputtered
Ruthenium
Reed
40-115-121
150Vdc
100Vac.
Double Pole,
Single Throw
(normally open)
Single Pole,
Double Throw
Max
Power
40-110-021
Single Pole,
Double Throw
pickering
20
Relay Type
40-110 General
Purpose Reed Relay
Module
20W
1A
1.2A
40-115-022
40-115-122
3W
Shielded
Sputtered
Ruthenium
Reed
0.25A
1A
40-120-021
40-125-021
20W
1A
1.2A
40-125-121
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
High Density General Purpose
Relay Modules
General purpose relay
● Up to 100 Relays Per Module
● SPST, SPDT, DPST, and Shielded Configurations
● Ruthenium Reed Relays Suitable For Maximum
Signal Performance
● Electromechanical Relays For Higher Power
Applications
● Occupy Single 3U PXI Slot
● 200-Pin Front Panel Connector
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
Pickering Interfaces range of high density general purpose
relay modules provide an ideal solution for applications
requiring dense arrays of uncommitted relays. The range
includes both electromechanical and reed relay solutions in a
variety of configurations.
All reed relay versions use high quality sputtered ruthenium
relays that exhibit excellent contact performance under low
and medium level switching conditions. For general purpose
applications that also require higher power handling, the
range of electromechanical relays provides an ideal solution.
Configuration
Description
Relay Type
40-148 High Density
General Purpose
Relay Module
All these modules use a 200 way connectors that is
supported by a comprehensive range of cable and connector
accessories ensuring they can be quickly integrated into the
user’s test system with a minimum of effort.
For more detailed information on each module please refer to
the individual data sheets or visit our web site at:
www.pickeringtest.com
Max Switch
Voltage
Max
Power
Max Switch
Current
Max Carry
Current
40-140A-021
x50
x75
SPST
(normally open)
40-140A-121
x100
x50
DPST
(normally open)
x50
Shielded SPST
(normally open)
x48
x64
20W
Sputtered
Ruthenium
Reed
40-140A-221
1A
40-141-022
40-142-021
SPDT
3W
40-143-121
0.25A
40-143-221
40-145-001
x50
x75
150Vdc
100Vac
SPST
(normally open)
1A
x75
x100
x25
x50
SPST
(normally
closed)
40-145-001-NC
40-145-101-NC
Electromechanical
60W
62.5VA
1A
DPST
(normally open)
40-146-002
40-146-202
40-148-101
SPDT
40-148-201
x64
pickering
40-145-201-NC
40-148-001
x32
x48
40-145-101
40-145-201
x100
x50
Order Code
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
21
General Purpose Medium
Power Relay Modules
General purpose Power relay
● Reed Relay Solutions up to 2.5A
● Electromechanical Relays up to 5A
● SPST, DPST and DPDT Versions
● Easy to Use D-Type Connectors
● Occupy Single 3U PXI Slot
● Kernel, VISA and IVI Support For PXI
Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI
Specifications
This range of Pickering Interfaces relay modules offers higher
current ratings in a single 3U slot. Relays are available in
SPST, DPST and DPDT configurations. The relay solutions
have been carefully chosen to ensure a long service life. All
the D-type connectors used are fully supported by the range
of Pickering Interfaces cable and connector accessories to
simplify system integration.
40-138 High Density
2 Amp Versatile Relay Module
For more detailed information on each module please refer to
the individual data sheets or visit our web sit at:
www.pickeringtest.com
SPST
normally open
DPST
normally open
SPDT
DPDT
Max Power
Max Switch Voltage
Max Switch Current
Max Carry Current
Relay Configuration & Switch Count per Module
Ruthenium Reed Relay
For general purpose applications that also require higher
power handling, the range of electromechanical relays
provides an ideal solution.
Electromechanical Relay
Reed relay versions use high quality sputtered ruthenium
relays that exhibit excellent contact performance under low
and medium level switching conditions.
The table below show the available relay count for each
module. The 40-138 has a versatile cell-based architecture
with 13 cells. Each cell can be specified fitted with either
SPST, DPST, SPDT or DPDT relays - the table shows the
maximum allowable of one particular type. This gives the user
a mixed contact configuration to suit a specific application,
see the full data sheet for further information.
—
—
—
8 or 13
✔
60W
220Vdc
2A
2A
40-130
—
—
16 or 26
—
✔
60W
300Vdc
2A
2A
40-131
16 or 26
16 or 19
—
—
✔
60W
300Vdc
2A
2A
40-132
16 or 25
—
—
—
✔
40W
200Vdc
1A
2A
32
12, 16 or 19
—
—
✔
40W
200Vdc
1A
2.5A
16
—
—
—
✔
90W
250Vac
5A
5A
32 or 39
—
—
—
✔
90W
250Vac
2A
2A
80 †
40 †
52 †
26 †
✔
60W
300Vdc
2A
2A
40-138
80
40
52
26
✔
60W
300Vdc
2A
2A
40-139
Basic
Order
Code ‡
40-136
40-137
† The switch counts shown for the 40-138 are the maximum for a module populated with one switch configuration. This module
can be ordered with custom combinations of SPST, DPST, SPDT and DPDT. See the full data sheet for details.
‡ For the full order codes for each variant, please refer to the data sheet.
pickering
22
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
General Purpose High Power
Relay Modules
High Power relay
● Electromechanical Relays With Current Ratings to 40A
● Solid State Relays With Current Ratings to 30A
● SPST, DPST and SPDT Versions
● High Capacity Connectors
● One or Two 3U PXI Slot Modules
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
Pickering’s high power switching modules provide a range
of high current handling relays suited for high power
applications. Each module uses a connector that has
been carefully suited for the intended application and is
fully supported by Pickering Interfaces range of cable and
connector accessories.
Lower current versions require one 3U PXI slot, but the
highest current versions occupy two slots. The modules can
be used to switch heavy AC or DC loads, and the highest
current versions are particularly suitable for automotive test.
High power switches are also available in multiplexer and
matrix configurations.
Configuration
Description Relay Type
x8
x12
x8
x16
x10
Max Switch
Voltage
40-160 General
Purpose 10xDPST
Power Relay Module
For more detailed information on each module please refer to
the individual data sheets or visit our web sit at:
www.pickeringtest.com
Max Switch
Current
5A
SPDT
SPST
Max Carry
Current
Module
Width
125Vdc
250Vac
DPST
Electromechanical
Power
Relay
5A
35Vdc
250Vac
1 PXI Slot
DPST
x2
SPST
x2
DPST
Electromechanical
High
Power
Relay
x2
x4
x2
x4
x2
SPDT
x6
SPST
pickering
Electromechanical
Automotive
Power
Relay
Solid State
Relay
Order Code
37-way D
40-150-002
50-way D
40-151-002
37-way D
40-155-001
50-way D
40-156-001
10A
10-way
MS-M
40-160-001
8A
8A
2 x 10-way
MS-M
40-160-002
30A
30A
40-170-001
20A
20A
40-170-002
40A
40A
30Vdc
270Vac
16Vdc
SPST
Front Panel
Connector
10A
125Vdc
250Vac
x10
40-170 General
Purpose High Power
Relay Module
2 PXI Slot
High
Power
8-way
D-type
40-180-001
40-180-101
40-180-011
28Vdc
20A
20A
16Vdc
30A
30A
40-181-001
28Vdc
10A
10A
40-181-011
200V ac/dc
10A
10A
40-182-001
40V ac/dc
30A
30A
40-183-001
40-180-111
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
23
High Voltage Switching Modules
High Voltage Switching
● Hot Switching Up To 750Vdc or 750Vac peak
● Cold Switching Up To 1000Vdc or 1000Vac peak
● Reed Relay Versions For Long Operational Life
● Electro-Mechanical Relay Versions For Hot or
Cold Current Switching Up To 4A
● High Voltage D-Type Connector
● Occupy Single 3U PXI Slot
● Kernel, VISA and IVI Support For PXI
Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI
Specifications
The 40-310/320 high voltage range of switching modules
provides solutions for uncommitted relay and multiplexer
applications that need to switch voltages up to 1000V. They
are suited for hot or cold switching applications up to 10W
and 0.5A with a rating of 13mA at their maximum operating
voltage. The 40-330 uncommitted relay module can switch
up to 1000V and also has a hot or cold switching current
rating of 4A.
The 40-310/320 modules use 37-way D-Type high voltage
connector, and the 40-330 modules uses a 50-way D-Type
high voltage connector. These are fully supported by Pickering
Interfaces cable and connector accessory range.
Configuration
x8
x16
Description Relay Type
SPST
(normally
open)
12-Channel
Multiplexer
SPST
(normally
open)
pickering
24
40-320
High Voltage
Multiplexer
Module
The design ensures the modules can withstand high common
mode voltages and a protective safety cover is used to shield
the switching components.
For more detailed information on each module please refer to
the full data sheet or visit our web sit at:
www.pickeringtest.com
Maximum
Hot
Switching
Voltage
Maximum
Power
Maximum
Hot
Switching
Current
Maximum
Cold
Switching
Current
Order Code
40-310-001
High
Voltage
Rhodium
Reed
24-Channel
Multiplexer
x24
Maximum
Cold
Switching
Voltage
40-330 High
Voltage Relay
Module
1000Vdc
1000Vac
peak
750Vdc
750Vac
peak
10W
0.5A
(13mA at
max switch
voltage)
40-310-101
0.5A
40-320-001
40-320-101
Electromechanical
110Vdc
250Vac
120W
1000VA
4A
4A
40-330-001
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Low Density Matrix Modules
Low density matrix
● Ruthenium Reed Relay Versions For Maximum Signal
Performance
● Electro-mechanical Relay Versions For Current
Handling up to 2 Amps
● Single and Dual Matrix Configurations
● 50Ω, 50MHz Screened Reed Versions
● Expansion Capability Across Multiple Cards
● Fast Operating Speed <500µs for Reed Versions,
<3ms for Electromechanical Versions
● Occupy Single 3U PXI Slot
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
40-510 Matrix
Module
Pickering Interfaces offers a comprehensive range of low
density matrix modules that use either ruthenium reed relays or
electromechanical relays. They are a cost effective solution for
applications that require relatively small matrices in the PXI format.
The matrices can be expanded by connecting together multiple
modules, but Pickering recommend that users look at the higher
density modules that involve less user configuration.
All the reed relay versions use high quality sputtered ruthenium
relays that exhibit excellent contact performance under low
and medium level switching conditions. For general purpose
applications that also require higher power handling, the range of
electromechanical relays provides an ideal solution.
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
Single 12 x 4
Dual 12 x 4
Single 12 x 8
Single 24 x 4
Number of Front Panel
Relay Type
Poles
Connector
Y2
Y3
Y4
Y1
X1
X1
X2
X2
X3
X3
X4
X4
X5
X5
X6
X6
X7
X7
X8
Example Matrix Configuration:
Dual 8 x 4 with 2-pole contacts (40-515)
Max Switch
Voltage
Max
Power
Max Switch
Current
Max Carry
Current
Order Code
40-510-021 †
2-Pole
1-Pole
1-Pole
Y4
Matrix Bank 2
1-Pole
2-Pole
Y3
2-Pole
Crosspoint
68-pin
SCSI
2-Pole
1-Pole
Sputtered
Ruthenium
Reed
(screened
reed option
available
for 1-pole
matrices)
40-510-022
40-511-021 †
150Vdc
100Vac
20W
1A
1.2A
40-511-022
40-512-021 †
40-512-022
40-513-021 †
40-513-022
2-Pole
40-515-002
Dual 8 x 4
Single 8 x 8
Y2
X8
Matrix Bank 1
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Matrix
Configuration
Y1
2-Pole
50-way
D-type
ElectroMechanical
300Vdc
250Vac
60W
62.5VA
2A
2A
Single 16 x 4
40-516-002
40-517-002
† To order the screened reed relay version of a 1-pole matrix, please add -S suffix
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
25
Medium Density Matrix Modules
MED density matrix
● Ruthenium Reed Relay Versions For Maximum
Signal Performance
● Single and Dual Matrix Configurations
● 50Ω, 50MHz Screened Reed Versions
● Expansion Capability Across Multiple Cards
● Fast Operating Speed <500µs
● Occupy Single 3U PXI Slot
● Kernel, VISA and IVI Support For PXI
Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
40-523 Matrix
Module
Pickering Interfaces offers a comprehensive range of medium
density matrix modules that use ruthenium reed relays. They
are a cost effective solution for applications that require mid
range matrices in the PXI format.
The matrices can be expanded by connecting together multiple
modules, but Pickering recommend that users look at the
higher density modules that involve less user configuration.
All versions use high quality sputtered ruthenium reed relays
that exhibit excellent contact performance under low and
medium level switching conditions.
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
X1 X2
Single 16 x 8
Single 32 x 4
Single 24 x 8
Dual 12 x 8
Single 44 x 4
Single 46 x 4
X5 X6
X7
X8 X9
X10 X11 X12 X13 X14 X15 X16 X17 X18 X19
Y2
Y3
Y4
Y5
Y6
Y7
Y8
Example Matrix Configuration:
Single 24 x 8 with 1 pole contacts (40-521)
Number of Front Panel
Relay Type
Poles
Connector
Max Switch
Voltage
Max
Power
Max Switch
Current
Max Carry
Current
78-way
D-type
ElectroMechanical
300Vdc
250Vac
60W
62.5VA
2A
2A
10W
0.5A
1.0A
96-pin
SCSI
Sputtered
Ruthenium
Reed
(screened
reed option
available
for 1-pole
matrices)
2-Pole
1-Pole
2-Pole
1-Pole
2-Pole
1-Pole
2-Pole
1-Pole
X22 X23 X24
Y1
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Matrix
Configuration
X3 X4
Order Code
40-518-002
40-519-002
40-521-021†
40-521-022
40-522-021†
150Vdc
100Vac
40-522-022
20W
1.0A
1.2A
40-523-021†
40-523-022
40-524-021
† To order the screened reed relay version of a 1-pole matrix, please add -S suffix
pickering
26
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
High Density Matrix Modules
●
●
●
●
●
●
●
●
●
●
●
High density matrix
Ruthenium Reed Versions for Max Signal Performance
NEW Solid State Version for High Speed & Long Life
Single and Dual Matrix Configurations
Partially Populated Configurations Available
50Ω, 50MHz Screened Reed Versions
Expansion Capability Across Multiple Cards
Fast Operating Speed <500µs
Occupy Single 3U PXI Slot
Kernel, VISA and IVI Support For PXI Environments
Kernel and IVI Support For LXI Environments
Complies with PXI and CompactPCI Specifications
X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14 X15 X16 X17 X18 X19
X64 X65 X66
40-541 Ultra High
Density Matrix Module
Y1
Y2
Y3
Any high density matrix is available in partially populated
configurations giving a cost effective solution for specific
applications. Please consult the sales office for details.
Y4
Y5
Y6
Y7
Y8
Single 66 x 8 with 1 pole contacts (40-541-021)
Pickering Interfaces offers a comprehensive range of high
density matrix modules that use ruthenium reed relays. They
are a cost effective solution for applications that require high
density matrices in the PXI format. Expansion to even larger
matrices is possible by connecting together multiple modules.
Matrix
Configuration
Number
of Poles
NEW Single 64 x 4
Single 32 x 8
Single 32 x 8
Dual 16 x 8
Single 64 x 4
Dual 32 x 4
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Front Panel
Max Switch
Relay Type
Voltage
Connector
78-pin D
Solid State
±60V
1-Pole
2-Pole
1-Pole
Max
Power
Max Switch Max Carry
Current
Current
—
0.5A
20W
1.0A
1.5A surge
Order Code
40-500-001
40-530-021‡
40-531-021†
96-pin
SCSI
1.0A
40-531-022
40-532-021†
2-Pole
40-532-022
1-Pole
40-533A-021†
2-Pole
1-Pole
200-pin
2-Pole
Single 92 x 4
Dual 44 x 4
Sputtered
Ruthenium
Reed
10W
40-533A-022
0.5A
150Vdc
100Vac
40-534A-021†
0.5A
40-534A-022
40-535-021
40-536-021
96-pin
SCSI
Single 44 x 8
Single 55 x 8
Reed relay versions use high quality sputtered ruthenium
reeds that exhibit excellent contact performance under low
and medium level switching conditions.
40-537-021†
40-538-021†
1-Pole
Single 132 x 4
200-pin
Single 66 x 8
96-pin
Single 33 x 16
68-pin
40-540-021
10W
0.5A
0.5A
40-541-021
40-542-021
40-581-002
Single 33 x 8
2-Pole
96-pin
Electromechanical
60W
1.0A
1.0A
† The 1-pole versions of these matrices can be ordered with screened reed relays fitted, please add -S suffix
‡ The 40-530-021 is a lower cost alternative to the 40-531-021 with a higher switch current and the same connector pin-out
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
27
Power Matrix Modules
Power matrix
● Electro-mechanical Relays With Current Ratings
of 2A and 5A and Switching Up To 250Vac
● Solid State Relays With Current Ratings of 10A
and 30A and Switching Up To 200V ac/dc
● Single and Dual Matrix Configurations
● 1 or 2 Pole Switching Configurations
● Expansion Capability Across Multiple Cards
40-550
Power
Matrix
Module
● Occupy Single 3U PXI Slot
● Kernel, VISA and IVI Support For PXI
Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
X1 X2
X3 X4
X5 X6
X7
X8 X9
X10
Y1
Y2
Y3
Y4
X1 X2
X3 X4
X5 X6
X7
X8 X9
X10
Y1
Y2
These power matrix modules provide matrices with higher
current and power ratings than the high density versions.
They are designed for the switching of AC or DC loads or
for controlling large relay or solenoid systems. The electromechanical relay based versions have ratings from 2A to 5A,
occupy a single slot and are ideal for power applications.
Solid state versions have ratings of 10A and 30A, occupy two
PXI slots and are suitable for automotive test applications.
Each module uses connectors supported by the Pickering
cable accessory range and relays have been carefully selected
to ensure long service life under demanding load conditions.
Y3
Y4
Example Matrix Configuration:
Dual 10 x 4 (40-546)
Matrix
Configuration
40-554-001
30A Solid
State Matrix
Number of
Poles
Front Panel
Connector
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Relay Type
Max Switch
Voltage
Maximum
Current
40-545-001
Single 10 x 4
Dual 10 x 4
Single 10 x 8
Order Code
1-Pole
37-way
D-type
Single 20 x 4
110Vdc
250Vac
2A
ElectroMechanical
40-546-001
40-547-001
40-548-001
40-550-002
Single 8 x 4
2-Pole
Single 6 x 2
1-Pole
pickering
28
2 x 20-way
MSN
8-way Power
D-type
Solid State
High Power
35Vdc
250Vac
5A
200V ac/dc
10A
40-553-001
40V ac/dc
30A
40-554-001
40-550-902
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Large Matrix Modules
Large matrix
● Integrated PXI Matrix Modules With
Buit In Analog Bus
● Fully Scalable Matrix Solution
● Partially Populated Configurations
Available
● High Reliability Instrument Grade
Reed Relay Versions
● NEW Solid State Versions
● Low Cost Of System Integration
● Wide Range of Fully Configured Y Bus
Architectures
● Ratings up to 150 Volts, 1 Amp and 20W
● High Bandwidth - up to 40MHz
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
Pickering Interfaces range of Large Matrix Modules offers
integrated solutions for matrix assemblies. The use of high
density packaging and integrated backplanes enables a large
matrix to be implemented with no user configuration or
special matrix expansion kits. Fault diagnosis can be carried
out through the use of the 90-100 MXT tool and the matrices
can be serviced using standard de-soldering tools.
The 40-560 BRIC range is available in 3 mechanical sizes
occupying 2, 4 or 8 PXI slots, and with 3 different electrical
characteristics. Versions are available with 1 pole, 2 pole and
1 pole screened architectures.
All reed relay matrices use high quality sputtered ruthenium
relays that exhibit excellent contact performance under low
and medium level switching conditions.
The modules are ideal for applications requiring a large
matrix, they are programmed as a single matrix entity, saving
user integration and software investment. The integrated
design ensures high matrix performance with high signal
bandwidth and fewer system implementation errors.
Any large matrix is available in partially populated
configurations giving a cost effective solution for specific
applications. Please consult the sales office for details.
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
DUT
No. 40
552
551
550
51
50
49
DUT
No. 3
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
Device
Under Test
No. 2
For more information on these modules and the Pickering
BRIC system, please refer to the individual data sheets or visit
our web site at: www.pickeringtest.com
Device
Under Test
No. 1
Instrument 5
12
Instrument 4
11
10
9
Instrument 3
8
7
6
Instrument 2
5
4
3
2
1
Instrument 1
Large matrices with 8 Y connections are also available in solid
state versions. These exhibit high switching speed with a very
long service life and are suitable for low current applications
such as data acquisition.
Schematic diagram showing a 552 x 8 BRIC Matrix being used to parallel test multiple DUTs.
The BRIC Matrix allows tremendous test system flexibility.
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
29
LARGE MATRIX MODULES WITH 4 Y CONNECTIONS
Minimum
X Size
Maximum
X Size
Matrix Configuration
(all relays are
ruthenium reed)
Maximum
Switch
Voltage
Maximum
Power
Max Carry
(Switch)
Current
10W
0.5A
(0.5A)
276
184
552
1104
single pole
Number
of Slots
Order Code †
2
40-560-221
4
40-560-021
8
40-560-121
40-562-221
132
two pole
2
screened single pole
single pole
88
264
40-562-221-S
150dc
100Vac
two pole
20W
screened single pole
1.2A
(1.0A)
40-562-021
4
40-562-022
40-562-021-S
40-562-121
single pole
528
40-562-222
two pole
8
screened single pole
† For the full order codes and all the available matrix sizes for each variant please refer to the data sheet
40-562-122
40-562-121-S
LARGE MATRIX MODULES WITH 8 Y CONNECTIONS
Minimum
X Size
Maximum
X Size
138
92
276
552
Matrix Configuration
(all relays are
ruthenium reed)
Maximum
Switch
Voltage
Maximum
Power
single pole
Number
of Slots
2
dual analog bus (8-wire)
single pole
4
dual analog bus (8-wire)
single pole
8
dual analog bus (8-wire)
single pole
90
Max Carry
(Switch)
Current
10W
two pole
screened single pole
0.5A
(0.5A)
180
360
two pole
8
2
two pole
1.2A
(1.0A)
4
40-562-222
40-562-022
40-562-021-S
40-562-121
8
screened single pole
† For the full order codes and all the available matrix sizes for each variant please refer to the data sheet
30
40-561-122
40-562-021
single pole
two pole
40-561-022
40-562-221-S
20W
screened single pole
pickering
40-561-222
40-562-221
two pole
single pole
264
40-560-121-M
40-561-121-S
screened single pole
132
40-560-121
40-561-121
single pole
44
40-560-021-M
40-561-021-S
150Vdc
100Vac
screened single pole
66
40-560-021
40-561-221-S
4
single pole
40-560-221-M
40-561-021
two pole
screened single pole
40-560-221
40-561-221
2
single pole
60
Order Code †
40-562-122
40-562-121-S
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
LARGE MATRIX MODULES WITH 16 Y CONNECTIONS
Matrix Configuration
(all relays are
ruthenium reed)
Maximum
Switch
Voltage
Maximum
X Size
69
2
40-560-221
46
138
4
40-560-021
8
40-560-121
276
Maximum
Power
Max Carry
(Switch)
Current
Minimum
X Size
single pole
Number
of Slots
Order Code †
40-561-221
45
two pole
2
screened single pole
30
90
40-561-221-S
0.5A
(0.5A)
10W
single pole
two pole
40-561-021
4
180
two pole
screened single pole
40-561-121
150Vdc
100Vac
8
40-562-221
two pole
2
single pole
66
two pole
1.2A
(1.0A)
20W
screened single pole
40-562-021
4
40-562-022
40-562-021-S
40-562-121
single pole
132
40-562-222
40-562-221-S
screened single pole
22
40-561-122
40-561-121-S
single pole
33
40-561-022
40-561-021-S
screened single pole
single pole
40-561-222
two pole
8
screened single pole
† For the full order codes and all the available matrix sizes for each variant please refer to the data sheet
40-562-122
40-562-121-S
LARGE MATRIX MODULES WITH 32 Y CONNECTIONS
Minimum
X Size
Maximum
X Size
10
30
Matrix Configuration
(all relays are
ruthenium reed)
Maximum
Switch
Voltage
Maximum
Power
Max Carry
(Switch)
Current
single pole
150Vdc
100Vac
20W
1.2A
(1.0A)
Number
of Slots
Order Code †
2
40-562-221
4
40-562-021
60
8
† For the full order codes and all the available matrix sizes for each variant please refer to the data sheet
40-562-121
15
NEW SOLID STATE LARGE MATRIX MODULES WITH 8 Y CONNECTIONS
Minimum
X Size
Maximum
X Size
Matrix Configuration
(all relays are
solid state)
Maximum
Switch
Voltage
Max Carry
Current
Max Surge
Current
0.25A
0.75A for
100ms
Number
of Slots
Order Code †
2
40-563-221
4
40-563-021
384
8
† For the full order codes and all the available matrix sizes for each variant please refer to the data sheet
40-563-121
96
64
192
pickering
single pole
40V
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
31
2 Amp Large Matrix Modules
2A Large matrix
● Integrated Large Size Matrices
● Require No User Configuration
● Pickering BRIC™ Modules Offer a Scalable
Solution With Upgrade Paths
● 2-Pole Electro-mechanical Relays With Current
Handling of 2 Amps
● Wide Range of Matrix Sizes with 4 or 8 Y
Connections
● Partially Populated Configurations Available
● Fast Operating Speed of <3ms
● Occupy 4 or 8 3U PXI Slots
40-565 BRIC8 2 Amp
2-Pole Matrix Module
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
Pickering Interfaces range of Large Matrix Modules offers
integrated solutions for large matrix assemblies. The use of
high density packaging and integrated backplanes enables a
large matrix to be implemented with no user configuration or
special matrix expansion kits. The high density approach used
ensures the matrix has a large bandwidth and low through
path resistance. Fault diagnosis can be carried out through
the use of the 90-100 MXT tool and the matrices can be
serviced using standard de-soldering tools.
This range of large matrices feature 2-pole switching and
current handling up to 2A using electromechanical relays.
Any large matrix is available in partially populated
configurations giving a cost effective solution for specific
applications. Please consult the sales office for details.
40-566 BRIC8 2 Amp
2-Pole Matrix Module
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
For more information on these modules and the Pickering
BRIC system, please refer to the individual data sheets or visit
our web site at: www.pickeringtest.com
Y Size
NEW
4
8
Minimum Maximum
X Size
X Size
55
24
Matrix Configuration)
Maximum
Switch
Voltage
Maximum
Power
Max Carry
(Switch)
Current
Number
of Slots
165
385
96
4
two pole
(electromechanical relay)
300Vdc
250Vac
60W
2A
(2A)
192
† For the full order codes and all the available matrix sizes for each variant please refer to the data sheet
pickering
32
Order Code †
8
4
8
40-566
40-565
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Fault Insertion Matrix Modules
Fault Insertion matrix
● Designed For Fault Insertion Applications
● Breakout Connections For Wiring to Sensors
● Pickering BRIC™ Architecture Provides Scalable
Matrix Size
● Wide Range of Matrix Sizes
● Partially Populated Configurations Available
● Ruthenium Reed Relay Versions For Maximum
Signal Performance
● Electro-mechanical Relay Versions For Current
Handling up to 10 Amps
● Occupy 4 or 8 3U PXI Slots
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
40-592 BRIC8 FIBO Matrix Module
BREAKOUT 1.3
BREAKOUT 1.2
BREAKOUT 1.1
The Fault Insertion matrices are designed specifically
for safety critical applications where the response of a
control system is required to be evaluated when sensor
connections behave in unexpected ways. This is particularly
important in safety critical applications, such as automotive
and aeronautical systems, where unexpected controller
behavior could result in loss of life or substantial asset loss.
31 x 8
20 x 8
6x8
124 x 8
248 x 8
2-Pin
Breakout
80 x 8
160 x 8
30 x 8
3-Pin
Breakout
Sputtered
Ruthenium
Reed
BREAKOUT 80.1
BACKPLANE CONNECTION
Y3
Y4
Y5
Y6
Y7
All reed relay matrices use high quality sputtered ruthenium
relays that exhibit excellent contact performance under low
and medium level switching conditions. For applications that
require fault insertion in power circuits and current handling
up to 10A, Pickering’s matrices based on electromechanical
relays provide an ideal solution.
Relay Type
BREAKOUT 2.1
Y2
The use of a programmable matrix for fault insertion
ensures testing is fast to perform and can be reproduced on
subsequent test cycles in the event of corrective action or a
system upgrade.
Minimum
Maximum
Matrix
Matrix Size Matrix Size Configuration
BREAKOUT 80.3
BREAKOUT 80.2
Y1
All these matrices feature a breakout arrangement that
allows faults to be attached to the sensor lines via the
Y axis. This includes the breaking of a connection or the
adding of a series defect – all of which can simulate
connectivity problems in the system. The three pin
breakout versions allow the connection to be swapped for
a “bad” sensor simulation.
The matrix design is based on Pickering’s proven BRIC
architecture that allows the matrix size required for an
BREAKOUT 2.3
BREAKOUT 2.2
Y8
application to be selected from the many versions available.
Also, any FIBO matrix is available in partially populated
configurations giving a cost effective solution for specific
applications. Please consult the sales office for details.
Connectors used are fully supported by Pickering’s accessory
range of cables.
For more detailed information on each module please refer to
the individual data sheets or visit our web site at:
www.pickeringtest.com
Maximum
Switch
Voltage
150Vdc
100Vac
Maximum
Power
20W
Max Carry
(Switch)
Current
1.2A (1.0A)
Number
of Slots
Order Code
4
40-592-021-2P
8
40-592-121-2P
4
40-592-021-3P
40-592-122-3P
Electromechanical
125Vdc
250Vac
300W †
10A (10A)
†
8
40-595-101-3P
† The power and current figures shown are for the matrix crosspoints, the breakout contacts are rated at 240W and 8A.
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
33
NEW Fault Insertion Switch Modules
Fault Insertion Switch
Designed For Fault Insertion Applications
Breakout Connections For Wiring to Sensors
Choice of Channel Counts and Switch Configurations
Solid State Relay Versions For Current Handling
up to 30 Amps
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
●
●
●
●
All the connectors used by these modules are supported by a comprehensive
range of cable and connector accessories.
40-196-001
RL1
FAULT1
RL4
IN1.1
IN2.1
RL3
IN1.2
IN2.2
RL46
OUT3.1
RL12
OUT2.2
FAULT10
RL14
IN3.1
RL8
RL5
CHANNEL1
RL11
OUT2.1
RL7
OUT1.2
FAULT3
RL9
RL6
OUT1.1
RL2
FAULT2
RL13
RL15
CHANNEL2
CHANNEL3
OUT10.1
RL47
OUT3.2
IN3.2
RL10
RL49
IN10.1
RL48
CHANNEL10
Number of
Channels
Number of Fault Inputs
6
2 buses, 2 inputs
7
1 or 2 buses, 1 or 2 inputs
64
1 or 2 buses, 4 or 8 inputs
160-way
22 pairs
8
96-way
SCSI
11 pairs
4
10
5 pairs
5
pickering
34
#2
#3
#3
#63
#63
#64
#64
RL50
40-190 Fault Insertion Switch
with two fault buses
40-196 Fault Insertion Switch with signal pairs and separate fault inputs
10 pairs
#2
Fault MUX
OUT10.2
IN10.2
#1
Fault Insertion Bus 1
For more detailed information on each module please refer to the individual
data sheets or visit our web site at: www.pickeringtest.com
#1
Front Panel
Connector
2x 8-way
D-type
Relay Type
Solid State
Maximum
Switch Voltage
Max Carry (Switch)
Current
Order Code
40V
30A
40-191-002
200V
10A
40-192-002
16Vdc
ElectroMechanical
50-way
D-type
Fault Connections
Fault insertion switches based on electro-mechanical relays are available with
current handling up to 20A. Versions with solid state relays can handle up to
30A. For applications that require fault insertion switching on a larger scale,
Pickering’s BRIC base fault insertion matrices provide an ideal solution.
40-191
30A Fault
Insertion
Switch
Fault Insertion Bus 2
These switch modules feature a breakout arrangement that allows
faults to be attached to the sensor lines. This includes the breaking of a
connection or the adding of defect – all of which can simulate connectivity
problems in the system. Two switching topologies are available; The first
has single signal paths with series switches and switches to connect to one
or more fault buses. The second has pairs of signals with series switches,
shorting switches between the signal pairs and switches to connect either
signal to an external fault input.
Stimulus/Measurement Connections
40-196 Avionics/
Automotive 5A Fault
Insertion Switch
UUT Connections
The Fault Insertion switches are designed specifically for safety
critical applications where the response of a control system is
required to be evaluated when sensor connections behave in
unexpected ways.
150Vdc
100Vac
110Vdc
100Vac
20A max, 1A min.
40-193
20A max, no min.
40-194
2A (2.0A)
40-190
1A (1.0A)
5A (5.0A)
40-195-001
40-195-101
40-196-001
40-196-101
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Low Density Multiplexer Modules
Low Density MUX
● Versatile Multiplexer Range With Single & Dual
Operation
● Configurable Versions Can be Set With Different
Bank Sizes and Pole Count
● Low Thermal EMF Version
● Screened 50Ω Option with 50MHz Bandwidth
● All Versions Use High Reliability Pickering
Ruthenium Reed Relays
● Fast Operating Speed <500µs
● Switch up to 150Volts, 1.2A with 20W Max Power
● Occupy Single 3U PXI Slot
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI
Specifications
MUX Bank 1
The range of low density multiplexer solutions are ideal for
applications requiring a lower number of channels and poles.
All modules are based on high quality ruthenium reed relays
that provide a very long service life and consistent contact
operations at all rated switching levels.
MUX Bank 2
1
1
2
2
3
The range includes a low thermal offset multiplexer that is
suitable for connecting to thermocouples and other sensors
that requires the use of contacts with low offset errors and
consistent contact performance.
3
Common
4
4
Common
15
16
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
15
16
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Example Multiplexer Configuration:
Dual 1 to 16 (40-630)
Multiplexer
Configuration
Number of
Poles
Dual 16 to 1
2-Pole
Dual 32 to 1
1-Pole
Single 16 to 1
4-Pole
Single 32 to 1
2-Pole
40-630 General
Purpose Multiplexer
Module
Relay Type
Max Switch
Voltage
Maximum
Power
Max Carry
(Switch)
Current
Front Panel
Connector
Sputtered
Ruthenium
Reed
Order Code †
40-630-022
Single 64 to 1
Screened
Dual 16 to 1
1-Pole
Screened
Ruthenium
Reed
Single 24 to 1
2-Pole
Single 48 to 1
1-Pole
Sputtered
Ruthenium
Reed
Low thermal EMF
Single 23 to 1
2-Pole
Screened
Single 32 to 1
Dual 24 to 1
Low thermal
Ruthenium
Reed
150Vdc
100Vac
1.2A (0.5A)
68-way
40-630-021-S
20W
40-632-021
100Vdc
1.0A (0.5A)
96-way
40-620-022
† For the full order number and configuration codes for each variant, please refer to the data sheet.
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
35
High Density Multiplexer Modules
High Density MUX
● Versatile Multiplexer Range With Channel
Counts From 4 to 1, Up To 198 to 1
● Versions Available With Between 1 and 20
Separate Banks
● Pole Count From 1 Up To 32
● Reed Versions Use High Quality Sputtered
Ruthenium Reed Relays
● Screened 50Ω Option with 50MHz Bandwidth
● Occupy Single 3U PXI Slot
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
● NEW Software Configured Versatile Multiplexers
1.1
1.2
1.3
1.4
The range of High Density Multiplexers provide a compact array of
MUX solutions with differing combinations of channel counts and
poles. Most high density solutions include isolation relays that allows
the MUX to be disconnected from the single input/output port,
enabling the convenient interconnection of other channels.
2.2
Channels
Banks
128
Minimum Multiplexer
Channel Configuration
Poles
Channels
1
16
2
64
160
1
1
80
1 screened
Banks
8
16
3
18
2
20
Common
Max Switch
Voltage
Max Carry
(Switch)
Current
1.2A (1.0A)
1
40-615-021
Sputtered
Ruthenium
Reed
40-615-021-S
1.0A (1.0A)
—
150V DC
1.2A (0.5A)
198
1
40-617-021
40-640-022
40-670A-021
16
5
1
16
8
1
1
40-616-021
40-640-021-S
1
1 screened
99
40-610-021-S
40-615-022
100V DC
1
—
Order Code †
40-610-021
1 screened
198
NEW 128
49.3
40-610-022
2
47
49.2
1
1 screened
—
49.1
1
2
94
99
Relay Type
1 screened
1 screened
5
C.4
2
1
4
C.2
C.3
49.4
Poles
1
1
C.1
1
8
2.4
Chan 49
For more information on these modules please refer to the individual
data sheets or visit our web site at:
www.pickeringtest.com
40-670A
Multiplexer
in 49 Channel
4 pole
Configuration
(1 bank).
2.3
Isolation
Switches
Chan 2
2.1
The modules use high density connectors that are fully supported by
the Pickering Interfaces range of connector and cable accessories.
Maximum Multiplexer
Channel Configuration
Chan 1
40-675 Very
High Density
Multiplexer
32
100V DC
0.5A (0.5A)
40-670A-021-S
16 screened
32
1
40-670A-022
Electromechanical
150Vdc
1.0A (1.0A)
40-675-002
40-612-002 ‡
300Vdc
2.0A (2.0A)
250Vac
40-613-002 ‡
NEW 64
1
2
4
16
2
† For the full order codes and all the available multiplexer sizes for each variant please refer to the data sheet.
‡ The 40-612/613 are versatile high density multiplexers which can be set to many different configurations under software control.
pickering
36
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Power Multiplexer Modules
Power MULtipleXer
● Versatile Multiplexer Range With Channel
Counts From 3 to 1, Up To 64 to 1
● Versions Available With Between 1 and 8
Separate Banks
● One or Two Pole Versions Available
● Electromechanical Relay Versions Capable of
Switching Up To 10 Amps
● Solid State Relay Versions Capable of Switching
Up To 30 Amps
● Power And Sense MUX Version Suitable For
Power Distribution and Regulation Circuits
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
40-656 38
Channel 2 Amp
Multiplexer
1.1
The power MUX range provides a selection of switching modules based
on electromagnetic, reed and solid state relays capable of switching
currents of up to 30A. Each module supports one or more multiplexer
channels between one input/output terminal and a selection of output/
input terminals. To reduce through path resistance most of these
multiplexers do not include isolation relays.
1.2
Each module uses connectors supported by the Pickering cable accessory
range and relays have been carefully selected to ensure long service life
under demanding load conditions.
Relay Type
Single 16 to 1
7 Bank 4 to 1
2-Pole
Single 38 to 1
Electromechanical
8 Bank 8 to 1
4 Bank 16 to 1
2 Bank 32 to 1
4.1
Common
16.1
16.2
Max Carry
(Switch) Current
Front Panel
Connector
35Vdc
250Vac
5A (5A)
37-way
D-type
Order Code
40-650-002
40-655-002
220Vdc
125Vac
40-656-002
40-657-001-8/8/1
2A (2A)
78-way
D-type
40-657-001-4/16/1
40-657-001-2/32/1
40-657-001-1/64/1
Single 18 to 1 with
18 to 1 sense MUX
2-Pole
(power and
sense MUX)
8 Bank 8 to 1
2-Pole
1-Pole
2-Pole
Single 18 to 1
1-Pole
Dual 3 to 1
or Single 6 to 1
1-Pole
pickering
3.2
C.2
Single 64 to 1
Single 10 to 1
3.1
C.1
Max Switch
Voltage
110Vdc
250Vac
1-Pole
2.2
4.2
For more information on these modules please refer to the individual data
sheets or visit our web site at: www.pickeringtest.com
Number of
Poles
2.1
Schematic of 40-650
Power Multiplexer
Module
(two pole single bank
16 to 1)
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
Multiplexer
Configuration
40-667
30A Solid
State Power
Multiplexer
Ruthenium
Reed
Electromechanical
Solid State
High Power
200Vdc
240Vac
2A (1A)
300Vdc
250Vac
2A (2A)
35Vdc
250Vac
40-658-002
160-way
DIN 41612
40-660-001
10A (10A)
8A (8A)
20-way MSM 40-660-002
40-665-001
10A (10A)
200V ac/dc
10A
40V ac/dc
30A
40-659-102
8-way Power
D-type
40-666
40-667
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
37
NEW Solid State Multiplexer Modules
SOLID STATE MULtipleXer
● Versatile Multiplexer Range With Channel
Counts From 8 to 1, Up To 160 to 1
● Versions Available With Between 1 and 20
Separate Banks
● 1 or 2 Pole Configurations
● Solid State Switching Gives Fast Operation and
Long Service Life
● Ideal For Low current and Low Voltage
Applications
● Occupy Single 3U PXI Slot
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
40-682 Solid State
Versatile Multiplexer
Module
● Complies with PXI and CompactPCI Specifications
This range of high density multiplexers is based on solid state
switching devices. They suitable for applications that require
fast operation and a long service life with frequent switch
operation. They are ideal for routing low current, low voltage
signals such as DMM measurements or data acquisition. Also,
they have the advantages of no switch bounce and no wear
out mechanism.
The range provide a compact array of multiplexer solutions
with differing combinations of channel counts and poles. The
40-682 has a versatile software configurable architecture and
is the solid state equivalent of the relay based 40-612.
BANK 1
The modules use high density connectors that are fully
supported by the Pickering Interfaces range of connector and
cable accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
BANK 2
Com
BANK 20
1
1
1
2
2
2
3
3
Com
4
3
Com
4
4
5
5
5
6
6
6
7
7
7
8
8
8
Schematic of 40-680 Multiplexer Module
(20 bank 8 to 1 configuration)
Maximum Multiplexer
Channel Configuration
Minimum Multiplexer
Channel Configuration
Channels
Banks
Poles
Channels
Banks
Poles
160
1
1
8
20
1
Relay Type
Max Switch
Voltage
Max Carry
(Peak)
Current
Order Code †
±15V
20mA
(40mA)
40-680
±40V
250mA
(750mA)
40-682 ‡
Solid State
128
1
1
8
8
2
† For the full order codes and all the available multiplexer sizes for each variant please refer to the data sheet.
‡ The 40-682 is a versatile high density multiplexer which can be set to many different configurations under software control.
pickering
38
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
RF Switch Modules
RF Switching
● Comprehensive Range of RF Switch Modules
Including Relays, Matrices and Multiplexers
● 50Ω and 75Ω Versions Available
● Bandwidths Up To 3500MHz
● Wide Range of Signal Connectors Including BNC,
SMB, SMA, SMZ, 1.0/2.3, Mini SMB and MCX
● Power Handling Up To 15 Watts
● 75Ω Version Suitable for Telecoms and High
Quality Video Switching
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
40-874 Dual 8 to 1
RF Multiplexer
Module
● Complies with PXI and CompactPCI Specifications
RL1
1.4
MUX 2
RL8
RL5
2.1
RL7
COM 2
2.2
RL6
2.3
The modules can be provided with a variety of output
connectors to suit the application, they are also supported by
a comprehensive range of cable and connector accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Y1.1
40-776-751
2.4
The modules offer a range of relay, multiplexer and matrix
functions. Some matrices include the facility for externally
cabled expansion by providing a loop-through facility.
40-877
Bank 2
40-877
Bank 1
X1.1
X2.1
X1.1
Loop-Thru
X2.1
Loop-Thru
X2.2
X1.2
X1.2
Loop-Thru
40-870 Hex RF SPDT
Switch Module
pickering
Y2.2
Loop-Thru
1.3
Y2.2
1.2
RL2
Y2.1
COM 1
Y2.1
Loop-Thru
Schematic
Diagram for
the 40-776
Dual 4 to 1 RF
Multiplexer
Module
Pickering has a range RF switches capable of providing
economic switching for frequencies up to 3.5GHz. For
higher frequency applications, or applications requiring
high performance levels, Pickering also offer a variety of
microwave switching modules.
Y1.2
Loop-Thru
1.1
RL3
Y1.2
MUX 1
Y1.1
Loop-Thru
RL4
RF 2x2 Matrix
X2.2
Loop-Thru
RF 2x2 Matrix
Schematic Diagram for the 40-877 Dual 2 x 2
Expandable Matrix with Loop-thru
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
39
RF RELAY MODULES
RF Switch Configuration
NEW
Triple or Hex SPDT
Maximum
Frequency
Available 50Ω
Connectors
Available 75Ω
Connectors
3GHz
SMB, MCX
—
2.7GHz
—
SMB, MCX
NEW Triple or Hex
SPDT terminated
3GHz
SMB, MCX
—
2GHz
—
4 x SPDT relays
2.5GHz
BNC, SMB, SMA
Maximum
Power
10W
Order Code†
40-870
40-830
40-871
SMB, MCX
2W
terminated
40-831
BNC, SMZ, 1.0/2.3, miniSMB
15W
40-710
† For the full specification and corresponding order codes for each variant, please refer to the data sheet
RF MATRIX MODULES
RF Switch Configuration
Maximum
Frequency
Available 50Ω
Connectors
Available 75Ω
Connectors
NEW Single or Dual 2x2
Matrix with Loop-thru
3GHz
SMB, MCX
—
2.5GHz
—
SMB, MCX
8 x 2 Matrix
1.5GHz
SMA, SMB
—
8 x 9 Matrix
500MHz
12 x 8 Matrix
300MHz
SMB
SMZ, 1.0/2.3, miniSMB
miniSMB
Maximum
Power
10W
10W
3W
Order Code†
40-877
40-837
40-750
40-725
40-726A
† For the full specification and corresponding order codes for each variant, please refer to the data sheet
RF MULTIPLEXER MODULES
Maximum
Frequency
Available 50Ω
Connectors
Available 75Ω
Connectors
3GHz
SMB, MCX
—
3GHz
—
SMB, MCX
3GHz
SMB, MCX
—
2GHz
—
SMB, MCX
3GHz
SMB, MCX
—
2GHz
—
SMB, MCX
40-836
3GHz
SMB, MCX
—
40-874
3GHz
—
SMB, MCX
3GHz
SMB, MCX
—
3GHz
—
SMB, MCX
4 to 1 MUX with automatic
termination
SMB, SMA
SMZ, 1.0/2.3, miniSMB
4 to 1 MUX
BNC, SMB
BNC
RF Switch Configuration
NEW Single, Dual or Quad
4 to 1 MUX
NEW Single or Dual 4 to 1
Terminated Channel MUX
NEW Single, Dual or Quad
4 to 1 Terminated Com MUX
NEW Single or Dual
8 to 1 MUX
NEW Single 16 to 1 MUX
8 to 1 MUX
Dual 4 to 1 MUX
Maximum
Power
10W
2W
terminated
10W
40-832
40-833
40-876
40-834
40-875
40-835
2W
terminated
40-740
40-745
40-746
40-747
16 to 1 MUX
Dual 8 to 1 MUX
1.0/2.3, miniSMB
Quad 4 to 1 MUX
15W
3GHz
40-748
40-749
SMB, SMA
4 to 1 MUX
8 to 1 MUX
40-872
40-873
SMZ, 1.0/2.3, miniSMB
2GHz
Order Code†
40-770
40-775
SMZ, 1.0/2.3, miniSMB
40-776
Dual 4 to 1 MUX
16 to 1 MUX
3GHz
Dual 8 to 1 MUX
2GHz
1.0/2.3, miniSMB
10W
40-777
40-778
† For the full specification and corresponding order codes for each variant, please refer to the data sheet
pickering
40
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Microwave Switch Modules
Microwave Switch
● Comprehensive Range of Microwave Switch Modules
Including Relays, Matrices and Multiplexers
● 50Ω and 75Ω Versions Available
● Bandwidths Up To 65GHz
● Range of Signal Connectors Including SMA,
SMZ and Mini SMB
● Power Handling Up To 100 Watts
40-786 Triple
6 Channel
Microwave
Multiplexer
Module
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
The Pickering Interfaces range of microwave modules provides high
performance switching that features low insertion loss and very
high isolation. The range varies from simple multiplexer and switch
configurations to integrated matrices and large multiplexers.
Most products are characterized for 50Ω operation but some 75Ω
versions are supplied either as standard products or as custom
units. The 40-785 is also available in 20GHz terminated versions,
and in remotely controlled versions. Remote versions occupy a
single PXI slot with the microwave switches mounted separately
from the host chassis, connection to the module is via a supplied
control cable.
The modules use high quality RF connectors that are supported by
a comprehensive range of cable and connector accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Microwave Switch
Configuration
SWITCH
1 x Changeover (SPDT)
2 x Changeover (SPDT)
1 x Transfer Switch
2 x Transfer Switch
Single 6 to 1 MUX
MULTIPLEXER
Dual 6 to 1 MUX
Single 6 to 1 Terminated
Dual 6 to 1 Terminated
Maximum
Frequency
Available 50Ω
Connectors
65GHz
SMA, SMA-2.9,
SMA-2.4, SMA-1.8
Schematic
Diagram for
the 40-782
2 x Microwave
Transfer
Switch Module
18GHz
SMA
40GHz
NO1
C1
NC1
NO2
C2
NC2
Switch 1
Switch 2
1
2
1
2
3
4
3
4
Maximum Power
Available
Number
75Ω
of Slots
At Low
At Max
Connectors Frequency Frequency
Used
SMZ,
mini SMB
100W
26.5GHz
Order
Code†
1
40-780
2
40-782
30W
—
1.6/5.6
120W
50W
3
—
120W
(1W term)
50W
(1W term)
4
100W
30W
2
40-786
80W
25W
10
40-789
100W
30W
10
40-787
SMA, SMA-2.9,
40-785 ‡
6
Single 6 to 1 MUX
Dual 6 to 1 MUX
20GHz
Triple 6 to 1 MUX
Configurable 36 i/p MUX
MATRIX
Schematic
Diagram for
the 40-780
2 x SPDT
Microwave
Relay Module
SMA
—
12GHz
3 x 3 Matrix
4 x 3 Matrix
20GHz
SMA
—
4 x 4 Matrix
† For the full specification and corresponding order codes for each variant, please refer to the data sheet
‡ The 40-785 is also available in versions that occupying a single PXI slot with remotely mounted microwave relays.
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
41
Optical Switching Modules
Optical SWITCHING
● Comprehensive Range of Optical Multiplexers
and Insert/Bypass Switches
● MEMS Switching Technology Offers High
Reliability and Fast Operating Speed
● Single and Multi Mode Versions
● FC/APC, FC/PC, SC/PC, MU (mini SC) or LC
Connectors (Single Mode Versions)
● SC or ST Connectors (Multi Mode Versions)
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
Schematic
Diagram for
Single 4 to 1
Multiplexer
1
2
C
3
The Pickering Interfaces range of optical switching modules
include high performance multiplexers and insert/bypass
switches. MEMS (Micro Electro-Mechanical Systems) switch
technology offers higher performance and longer operational
life compared to conventional prism based optical switching.
4
1
Schematic
Diagram for
Insert/Bypass
Switch
40-852
8 Channel
Fiber Optic
Multiplexer
Module
2
1
3
Reset State
Set State
2
Optical Switch Configuration
4
3
4
Switch
Technology
All modules use high quality optical connectors that are
supported by a comprehensive range of fiber and connector
accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
Fiber/Wavelength Support
Connector Options
40-850
Single 4 to 1 Multiplexer
Single 8 to 1 Multiplexer
Single 2 to 1 Multiplexer
Single Mode/1200 to 1600nm
Multi Mode/700 to 1700nm
FC/APC, FC/PC, SC/PC,
MU (mini SC), LC, SC, ST
Single Mode/1200 to 1600nm
FC/APC, FC/PC, SC/PC,
MU (mini SC), LC
Single Mode/1200 to 1600nm
Multi Mode/700 to 1700nm
FC/APC, FC/PC, SC/PC,
MU (mini SC), LC, SC, ST
Single Mode/1200 to 1600nm
FC/APC, FC/PC, SC/PC,
MU (mini SC), LC
Dual 2 to 1 Multiplexer
Triple 2 to 1 Multiplexer
Quad 2 to 1 Multiplexer
Single Insert/Bypass Switch
Dual Insert/Bypass Switch
Triple Insert/Bypass Switch
Quad Insert/Bypass Switch
Order Code†
40-852
40-855
MEMS
40-860
† For the full specification and corresponding order codes for each variant, please refer to the data sheet
pickering
42
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Telecoms/Differential Switching Modules
Differential SWITCHING
● A Range of Switching Modules Designed For
Switching Signals Carried on Differential Pairs
● Daisy Chain Switching Modules Suitable For Testing
SONET/SDH Transmission Multiplexers
● Daisy Chain Switching Modules Available in
Unbalanced 75Ω and Balanced 120Ω Versions With
8 or 16 Channels
● Differential MUX For Switching Serial Data
Communication Signals Such as USB and Ethernet
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
This range of modules is ideal for switching signals carried as
differential signals where a controlled differential impedance
is required. Applications include Telecoms signals and the
switching of serial bus systems that use differential signalling.
16-Chan.
MUX
3
4
All the connectors used by these modules are supported by a
comprehensive range of cable and connector accessories.
For more information on these modules please refer to the
individual data sheets or visit our web site at:
www.pickeringtest.com
TEST SIGNAL OUT
TEST SIGNAL IN
2
40-736
Datacoms
MUX
The 40-735 and 40-736 multiplexers are designed to switch
signals carried by serial interfaces such as RS232 and USB.
They can be configured to different multiplexer formats,
each channel having two poles. The 40-736 has sufficient
bandwidth to allow the switching of Gigabit Ethernet.
The daisy chain switching modules 40-792/3/5/6, are
specifically designed for production or verification testing of
SONET/SDH transmission multiplexers switching 2MBit/s
or 1.5MBIt/s data. Versions are available for 75Ω or 120Ω
balanced systems with either 8 or 16 tributary channels.
The modules incorporate switches that allow data to be fed
sequentially through selected tributaries, and multiplexers
enable test equipment to break into selected channels.
1
40-796 Daisy
Chain Switching
Module
16-Chan.
MUX
16
1
2
3
4
Rx/Tx
Reversing
Switch
2-Pole Switching Array
Tx1
All Signal Paths
Are 2-Pole
DAISY
CHAIN
IN
DAISY
CHAIN
OUT
Rx/Tx
Reversing
Switch
RX2
TX2
RX16
Rx2
8-Way
2-Pole
Tree MUX
8-Way
2-Pole
Tree MUX
3
4
TX1
8-Way
2-Pole
Tree MUX
1
16
2
RX1
Rx1
Tx2
TX16
8-Way
2-Pole
Tree MUX
DEVICE UNDER TEST
16 Channel Daisy Chain Switching Module 40-793
Card Configuration
Daisy Chain Tributary Switch
(1-pole)
Daisy Chain Tributary Switch
Balanced (2-pole)
Configurable 2-pole Datacoms
MUX
pickering
Number of
Channels
8
16
8
16
Impedance
Configurable 2-Pole Datacoms MUX 40-736
Bandwidth
Maximum
Voltage
Maximum
Current
Order Code
40-792-701
75Ω
100MHz
100V DC
100V AC
1.0A
100/120Ω
40-793-701
40-795-922
40-796-922
Single 36:1 or
dual 18:1
90Ω
>200MHz
150V DC
100V AC
0.5A
40-735-912
Single 32:1, dual
16:1 or quad 8:1
100Ω
450MHz
100V
0.3A
40-736-001
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
43
NEW ARINC 608A Switching Modules
ARINC 608A SWITCHING
● A Range of Switching Modules Designed For
Routing Signals in Avionics Test Systems
● BRIC Based Resource Distributor & Bus Matrix
Inputs Module With a Choice of Configurations
● Source Switching Module Has 12 x 4 to 1
Multiplexers and 44 SPST Relay Contacts
Occupying a Single 3U PXI Slot
● Switch/Carry Current of 2A
● Maximum Switching Voltage 300Vdc/250Vac
● Kernel, VISA and IVI Support For PXI Environments
● Kernel and IVI Support For LXI Environments
● Complies with PXI and CompactPCI Specifications
Fully Populated 40-569
Resource Distributor/Bus
Matrix Module in BRIC8 Format
This range of switching modules is designed to support the
requirements the of ARINC 608A specification and are primarily
intended for the construction of avionics test systems.
16-WIRE BRIC ANALOG BACKPLANE
The 40-569 is based on Pickering’s proven BRIC format and can be
specified as a 4 or 8 slot module. The module can be fitted with a
combination of Resource Distributor and Bus Matrix Input daughter
cards as required by the user. The maximum configuration is six Bus
Matrix and two Resource Distributor cards fitted in a BRIC8 module.
The daughter cards are inter-linked by the BRIC’s 16-wire analog
backplane giving a high level of integration. This reduces the cost
and complexity of cabling that would required in implementing an
equivalent system using conventional switching modules.
2
2
2
2
2
For more information on these
modules please refer to the
individual data sheets or visit
our web site at:
www.pickeringtest.com
2
RESOURCE DISTRIBUTOR CARD
2-POLE 16 x 4 MATRIX
2
2
2
2-POLE 8 x 4 MATRIX
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
BUS MATRIX
INPUTS CARD
4
2
2
2
4
4
4
4-POLE 16 x 2 MATRIX
4
4
4
4
4
4
4
4
4
40-618 Source
Switching Module
4
4
4-POLE 16 x 2 MATRIX
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
40-569 Bus Matrix Inputs Card
Number of Channels
per Card
Max Cards
per Module
Resource Distributor
16 off 2-pole inputs
2
Bus Matrix Input
2x16 off 4-pole inputs
6
Source Switching
12 off 4-channel MUX
& 44 off SPST relays
—
Slot
Occupancy
4 or 8
Maximum
Voltage
300Vdc
250Vac
Maximum
Current
Order Code †
40-569
2A
1
40-618
† For the full specification and corresponding order codes for each variant, please refer to the data sheet
44
2
16-WIRE BRIC ANALOG BACKPLANE
Card Configuration
pickering
2
40-569 Resource Distributor Card
2
All the connectors used by
these modules are supported
by a comprehensive range
of cable and connector
accessories.
2
2
The 40-618 consists of twelve 4 to 1 multiplexers and 44 SPST
uncommitted relays in a single PXI slot module and is suitable for
Source Switching applications
All modules are based on high
quality electro-mechanical
relays with 2A switch/carry
current and 250VAC/220VDC
voltage rating.
2
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
SOFTWARE Support
PXI Instrument Software Drivers:
Pickering PXI Instrument Modules are supplied with complete Windows 2000/XP drivers and soft front panels - freely available
from our web site www.pickeringtest.com.
A Selection of Soft Front Panels for Pickering’s
wide range of PXI Instrument Modules
PXI Switching Software Drivers:
Pickering PXI Switch Modules are supplied with Windows 2000/XP drivers that can also be downloaded from our web site
www.pickeringtest.com from our software download page. Code examples are also available for LabWindows/CVI, Visual Basic,
Visual C++ and Borland C++.
All Modules have comprehensive VISA and DLL (Direct I/O) support together with Soft Front Panels, source code for LabVIEW
VIs, diagnostic utilities and HTML Help, all of which may also be downloaded directly from our web site.
Pickering have just one driver set that supports ALL of our PXI and PCI switch cards, greatly simplifying software development,
especially in systems with a large number of switch cards. Also provide is an IVI driver supporting most of the PXI switching
modules. All PXI Modules are compatible with NI’s Measurement & Automation Explorer.
Matrix Soft Panel
Multiplexer Soft Panel
Switch Panel Manager
Pickering Interfaces PXI Switching Soft Front Panels
Programming options for Pickering Interfaces PXI Cards
All PXI modules are supplied with software drivers for Microsoft Windows 2000/XP operating systems, with specific support for
the following development environments:
●●
●●
●●
●●
●●
Microsoft Visual Basic
Microsoft Visual C++
Borland C++
National Instruments LabWindows/CVI
National Instruments LabVIEW and LabVIEW RT
Windows drivers are supplied in the form of Dynamic Link Libraries, which should also be usable in any other development
environment that supports them.
Three different Windows drivers are available to meet particular system requirements, and should none of these be suitable there
is also the option of register-level programming. Drivers are generally ‘universal’, handling all models in the PXI range.
IVI Driver for Windows - pi40iv
The pi40iv IVI (Interchangeable Virtual Instrument) driver supports all Pickering Interfaces PXI switch cards that are consistent
with the Iviswtch class model - as are the great majority of cards in the PXI range. It integrates well with LabWindows/CVI and
LabVIEW, and is fully compatible with Switch Executive. It is also usable in general-purpose programming environments such as
Visual C++ and Visual Basic.
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
45
NI Switch Executive Support
All Pickering PXI switch modules that have IVI drivers are
100% compatible with Switch Executive from National
Instruments.
NI Switch Executive is a basic switch management and
routing application which allows users to configure and name
switch modules, external connections and signal routes.
All Pickering Interfaces modules with IVI support meet the
requirements that allow them to be supported by NI Switch
Executive.
VISA Driver for Windows - pipx40
The pipx40 driver conforms to the VISA (Virtual Instrument Software Architecture) standard for programmable instrumentation.
Instrument control environments such as LabVIEW and LabWindows/CVI are based on VISA, and pipx40 support libraries are
provided for them.
Where VISA is available, pipx40 can also be used in general-purpose programming environments such as Visual C++ and Visual
Basic. When IVI is not a system requirement this driver will often yield faster operation than the pi40iv driver.
Direct I/O Driver for Windows - Pilpxi
The Pilpxi driver accesses cards directly, without using the VISA software layer, while offering similar overall
functionality to pipx40. It is most commonly used in general-purpose programming environments such as Visual C++
and Visual Basic. Operating speed of the VISA and Direct I/O drivers is generally comparable.
Register-level Programming
Where the supplied drivers are not suitable, register-level programming can be employed - for example:
●●
●●
●●
●●
If the functionality of the supplied drivers does not meet the application requirements.
If security considerations demand full source-code for the application.
In development environments that have alternate mechanisms for accessing PCIbus.
For operating systems other than Windows LabVIEW, LabWindows/CVI and Switch Executive
Agilent VEE Support
All Pickering PCI/PXI Switch cards and some instrument cards
can be accessed from an ActiveX control and are therefore
available for use within Agilent VEE. This allows a rich
source of PCI/PXI switching solutions to be incorporated into
systems based on non-PCI/PXI instrumentation such as IEEE488.
NI TestStand Support
The Pickering Interfaces Switching Step Types for TestStand
helps to accelerate sequence development without detailed
knowledge of the PIPX VISA driver functions.
NI TestStand is designed to automate sequences of steps.
These steps can be individual tests, measurements, actions,
or commands.
pickering
46
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
PXI MATRIX TEST TOOL PI-MXT
Pickering Interfaces MatriX Test Tool (PI-MXT), 90-100
The PI-MXT is a sophisticated diagnostic tool, which allows a complete
relay self test of a BRIC™ module, individual BRIC™ daughter card, or
other Pickering Interfaces matrix. The PI-MXT is an easy to use, low
cost tool that is especially useful in remote production sites where local
technical support may be limited. It provides the following features and
capabilities:
●● Complete BRIC™ or Matrix self-test capability
●● Low cost, high fault coverage, self-test tool
●● Tests for all relay fault types (bad open or bad close)
●● Identifies faults to individual component relay level
●● Test sequencer allows detailed control of testing
●● Test results shown on screen or sent to log file
●● Runs single or repeat tests for maximum confidence
Customized versions can be made available for particular customer
requirements or for incorporation into System Level Test.
The Pickering PI-MXT Kit
The PI-MXT kit comprises the following:
●● A Test Adapter for the specific BRIC™ or matrix module being tested.
●● PI-MXT Software (Windows 2000 or XP executable).
The PI-MXT package requires the use of a separate Digital Multimeter
(DMM). The default 6½ digit DMM is the Pickering PXI 41-200 (or 41-210
7½ Digit DMM), other DMMs are supported.
Test Sequencer Front Panel for the
PI-MXT. This allows any combination
of tests to be run in either single or
multiple sequences.
PXI APPLICATIONS INFORMATION
PXI Detailed Application Notes
Pickering Interfaces have a wide range of detailed Applications Notes, these are specifically geared to allowing you to get the most
from your PXI based Functional Test System: To download these and many other application notes visit www.pickeringtest.com
Cost Effective Testing With the
PXI BRIC Matrix
Anatomy of the BRIC Matrix. Describes
How The BRIC Is Constructed
Selecting the Best Type of BRIC
Matrix For Your Application
Selecting a Platform for
Switching Applications
Comparison of SCXI and PXI
Modular Test Platforms
Describes the Principles of 2, 4 and
6 Wire Measurement Methods With
A DMM
A Comparison of The VXI and
PXI Modular Test Platforms
Typical Performance Information
For The 3GHz Programmable
Attenuator 41-180
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
47
PXI ACCESSORIES
Pickering Interfaces understands that just providing the
switching and instrumentation modules is not enough,
users need to be provided with fast and effective ways of
connecting their investment to the device under test.
The modules in the Pickering Interfaces PXI, PCI and LXI
system are fully supported by a comprehensive range
of connector and cable accessories. The accessories are
detailed in the 56 page Interconnection Solutions Catalog
available in paper or downloadable format. The catalog is
cross referenced to all Pickering system 40 PXI modules
and PCI modules as well as PXI modules supported by the
60-100 series LXI chassis, making it easy for the user to find
the perfect accessories to compliment their chosen module.
●● Connectors & Prototyping Cables For
Pickering PXI and LXI Modules.
Pickering can supply mating multiway connectors
for any PXI module in the range from 4-way power
connectors up to 200-way high density types. This
allows the user to construct their own prototype
cable assemblies to suit specific applications.
Alternatively, cableforms can be supplied with a
multiway connector on one end and unterminated
wires on the other. This removes a large amount
of the work required by the user when prototype
cabling is required
●● Cable assemblies For Pickering Interfaces
PXI and LXI
Pickering Interfaces offers a wide range of standard
and custom cable assemblies that support all our
switching and instrumentation products. Every
modules we manufacture is fully supported by
cables accessories, allowing users to procure their
cables and modules from on source to ensure
connector compatibility. Our manufacturing plant
in the Czech Republic can manufacture high quality
cable assemblies in small or medium volumes on
fast turn around times. We support both simple
and complex connectors (200 way).
●● Connector Blocks & Breakouts For Pickering
PXI and LXI Modules
Breakout Boxes provides an electrical connection
between a module’s multiway connector and a set
of screw terminals. They are mounted on the front
panel of the module and allow the user to easily
attach discrete wires to what would otherwise be a
difficult to terminate connector. Most Pickering PXI
modules have a good selection of Connector Blocks
and Breakouts available.
pickering
48
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
●● Fuse Holders and Terminals For PXI and LXI
We also offer a range of DIN rail mounted
Terminals and accessories. These provide an
easy means of building your test system as they
enable discrete wires from cableforms to be
interconnected between PXI modules and the
devices under test. The range also includes DIN
rail mounted fuse holders to provide overload
protection for your test system.
●● Custom Connectors &
Cabling
If a particular connector and
cable configuration cannot be
found in the Interconnection
Solutions Catalog, Pickering
can make custom cableforms
to special order. This service
further reduces the work that
the user requires to build a test
system that exactly meets their
requirements. Please contact
Pickering sales office to discuss
your application.
6U PXI SWITCHING MODULES
Pickering can also supply PXI switching modules in 6U
format, these are usually for specific applications and
made to special order. The range includes uncomitted
relays, and RF matrices as outlined below - please refer
to our web site for details, or to download the data
sheet.
●●
45-157 Power Relay Module
48 x SPDT relays with a voltage rating of
250VAC and capable of switching 7.5A
●●
45-720 250MHz RF Matrix Module
Expandable 16 x 16 matrix with loop-thru
connections. Available in 50Ω and 75Ω
versions.
Pickering can also supply 6U PXI cards with custom
switch configurations, please contact the Pickering sales
office for details.
pickering
45-157 6U Power
Relay Module
45-720 6U RF
Matrix Module
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
49
Other SWITCH AND INSTRUMENT SYSTEMS FROM PICKERING INTERFACES
Pickering have been manufacturing Modular Switching & Instrumentation systems since 1988. Our sister company
Pickering Electronics have manufactured instrumentation quality reed relays since the late 1960’s. Pickering
Interfaces design & manufacture solutions for all major modular Test platforms including PXI, GPIB, PCI, VXI and
now LXI, we also manufacture many customer solutions and have a wide range of connector/cabling designed for
the demanding Functional Test Developer.
LXI Instruments (LAN eXtensions for Instrumentation),
– SYSTEM 60
Pickering Interfaces are Strategic members of the LXI Consortium, www.lxistandard.org.
LXI is the next generation of test instrumentation combining state-of-the-art measurements in a small package at a
cost-effective price using enhanced Ethernet connectivity and built in Triggering. Pickering are constantly adding to their
range of LXI products, currently the range includes; High Density Matrices, High Power Matrices, Microwave Multiplexers,
Microwave Matrices, Fiber Optic Multiplexers, Low Thermal EMF Matrices, High Voltage Matrices, RF & Video Matrices, a
Power Management Switch, and a 7 or 18 slot Modular Switching Chassis that supports PXI switching modules in an LXI
environment.
60-102 LXI 7-Slot Modular Switching Chassis
60-103 LXI 18-Slot Modular Switching Chassis
60-711 LXI Dual 24x8 Video Matrix
60-800/820 LXI Microwave Multiplexer
LXImate
Want to know more
about LXI?
The LXImate is an easy to
read overview of the LXI
Standard and some of the
products available that
conform to this standard.
Get your free copy of the
LXImate by registering at
www.pickeringtest.com/
lximate
pickering
50
60-552 LXI High Density 64x64 Matrix
60-310 LXI High Voltage 2-Pole 300x2 Matrix
Pickering Interfaces are sponsor members of the PXI Systems Alliance www.pxisa.org
www.pickeringtest.com
E-Mail sales@pickeringtest.com
Other SWITCH AND INSTRUMENT SYSTEMS FROM PICKERING INTERFACES
PCI Switch Modules – SYSTEM 50
Pickering Interfaces have a range of competitively
priced PCI switch Modules, including General
Purpose Reed Relay, Matrix, Multiplexer, RF &
Programmable Resistor. Pickering Interfaces PCI
Modules share the same software environment as
our extensive PXI range.
VXI Switching System Modules – SYSTEM 30
Pickering Interfaces have a range of high density VXI
switching modules, System 30, containing up to 2340
relays per module. These are C sized modules with
a SCPI message based interface, VXI Plug/Play & IVI
Drivers, offering up to 10 times density advantage over
competing VXI switching products.
SIM Relay Cards – SYSTEM 1000
Pickering Interfaces also offer range of uncommitted relays, matrices and
multiplexers based on 72-pin SIM modules. These enable the user build
custom switching systems that can be located inside test fixtures and close
to the unit under test. Control is via an RS232 or I2C interface.
IEEE-488.2 & RS-232 Controlled Switching Systems – SYSTEM 10/20
Pickering Interfaces’ System 10 and System 20 Programmable Relay Switching Systems now offer the most
comprehensive range of switching modules currently available. Our switching systems will switch from nanoVolts to
7.5 kiloVolts, DC to 26.5GHz and picoAmps to 30Amps. Models are programmable using a wide range of interfaces:
IEEE 488, Ethernet, USB or RS-232.
Custom Switching Solutions
Pickering Interfaces are able to meet your exact custom switching needs. With extensive experience in PXI, PCI,
VXI, IEEE-488, and Ethernet architectures, we can develop a switching solution that matches your exact needs.
For further information please visit the Custom Design area of the “Sales” section of our web site or call your local
Pickering Sales office.
"A Switching Module Is Only As Good As The Relays Used"
Ruthenium Sputtered Reed Relays offer maximum performance, are
hermetically sealed and offer a very stable, long life relay contact (>109
operations) with fast operate time. Alternative cheaper types such as
electro-mechanical armature relays or non-instrumentation grade reed relays
(Rhodium plated) don’t offer the consistent contact resistance, long life, fast
switching speed and low level switching capability of an instrumentation reed
relay. All reed relays used in our switch modules are manufactured by our
sister company Pickering Electronics. www.pickeringrelay.com.
pickering
PXI Switch & Instrumentation
Pickering Interfaces www.pickeringtest.com
51
PXI SHORTFORM BACK PAGE