V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Product Guide for High-Precision Low-Power Signal Switches in Industrial, Instrumentation, Healthcare, and Communication Applications Low a n d Flat Switch On- R esistance L ow P a ra s it ic Ca pa c it a n c e High Ba n dwidt h Low P ower Consu mption Wide Operation Voltage Range Low Leakage and Charge I nje c t ion APPLICATIONS • Audio and video signal switching • Force and sense • Sample and hold • Programmable gain control and filtering • Test calibration • Signal port isolation • Relay replacement • Precision ADC input mux END PRODUCTS • Audio and video system • Data storage • Medical and healthcare devices • Control and automation • Network and telecommunication • Instruments • Modems and routers • Consumer electronics • Data acquisition • Test equipment RESOURCES: • Product web tables: http://www.vishay.com/analog-switches/ • For technical questions, contact AnalogSwitchtechsupport@vishay.com • Cross reference: http://www.vishay.com/analog-switches/competitor-cross-ref/ • Part number nomenclature • Package options One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components SELECTOR GUIDE 1/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Vishay Siliconix Analog Switches and Multiplexers For more than 40 years, Vishay Siliconix analog switches and multiplexers have been providing benchmark performance in a broad array of end products, including multi-channel data acquisition systems, process control and automation, instrumentation, video systems, healthcare and portable consumer electronics. To meet specific application requirements, the devices are offered in a number of package options, including the TSSOP, SOIC, miniQFN, MICRO FOOT®, and more. The devices support both single and dual supply operation. On-resistance values range from sub 1 Ω to 10 Ω and above. Switch configurations include SPST, SPDT, DPST, DPDT, and bus switches, while multiplexers include 2:1, 4:1, 8:1, and 16:1 as well as differential configurations. Vishay has made several recent additions to its lines with products that extend operation voltage range down to 1.6 V, bring ±15 V switches ON resistance to 1.5 Ω, lower the charge injection to sub-picocoulomb range, and offer signal bandwidth up to 1 GHz. The devices have been designed to meet the requirements of a variety of applications and can be categorized as follows: –– Low Charge Injection Devices These devices are optimized for precision switching applications with minimal charge injection during both ON and OFF transitions. The low switching glitches and fast settling times make these devices ideal in sample and hold applications, data acquisition, and precision ADC input multiplexing. –– Low On-Resistance Devices Devices in this family have a low on-resistance (typically 0.3 Ω to 8 Ω). A wide range of operating voltages is available for various applications such as audio and video switching, programmable gain control, power routing, and mechanical relay replacement. –– High-Bandwidth devices This category of devices is optimized for high-bandwidth applications, such as high-speed mixed-signal switching and filtering. The devices support frequencies up to 1 GHz. Devices optimized for this application require moderately low on-resistance to reduce signal insertion losses, low parasitic capacitance, high cross talk rejection, and high off isolation. –– Low-Voltage Devices for Consumer Handheld and Portable Instrumentation Vishay’s family of low-voltage devices are optimized for low and flat resistances down to a supply voltage of 1.6 V. This family of devices includes specialized devices for high-bandwidth USB applications, audio applications requiring negative voltage swings and fault protected switches designed to offer over current, break before make, make before break, or power down protection. Applications Analog switches and multiplexers are used in electronic systems to control and select a specific transmission path for an analog signal. However, every specific sub circuits require the switch to be optimized for different parameters. The following pages explore several applications and sub systems in a variety of end applications such as industrial process control, instrumentation, multi-channel data acquisition systems, vehicular diagnostics, medical and chemical analyzers. SELECTOR GUIDE 2/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Data Acquisition Data acquisition is the process of sampling signals that measure real-world physical conditions and converting the resulting samples into digital numeric values. Data acquisition circuitry includes sensors that convert physical parameters to electrical signals, signal conditioning circuitry, and analog-to-digital converters. Key Performance Parameters and Vishay Advantages Data acquisition applications require analog switch and multiplexer products with low charge |injection and parasitic capacitance to minimize switching errors and settling time in the input multiplexer and sample-and-hold circuits. Vishay offers industry-leading performance for these parameters, enabling high sampling rates and accuracy. In addition, Vishay also offers families with low switch on resistance that are suitable for mode switch, filtering, and precision programmable gain control applications. Block Diagram SOIC Mode Switch Filter 8:1 MUX 17 10 1 7 31 16 √ √ √ √ 2.7V ~ 12V, ±2.7 ~ ±6V Dual 4:1 MUX 17 10 1 7 31 16 √ √ √ √ DG411L, DG412L, DG413L 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 20 10 5 5 15 16 √ √ √ √ DG611A, DG612A, DG613A 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 72 0.25 0.5 2 9 16 √ √ √ √ DG9424, DG9425, DG9426 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 1.8 10 38 49 89 16 √ DG9251 2.7V ~ 16V, ±2.7 ~ ±8V 8:1 MUX 69 5 4.5 2.6 15 16 √ DG9252 2.7V ~ 16V, ±2.7 ~ ±8V Dual 4:1 MUX 69 5 4.5 2.1 9.5 16 √ DG1411/1412/1413 4.5V ~ 24V, ±4.5V ~ ± 15V Quad SPST 1.5 2 20 11 87 16 √ √ √ DG1408 4.5V ~ 25V, ±4.5 ~ ±15V 8:1 MUX 3 3 100 24 87 16 √ √ DG409L √ √ Sample & Hold TSSOP/TSOP 2.7V ~ 12V, ±2.7 ~ ±6V DG408L Programmable Gain Amp. CD(ON) (pF) typ Input Mux CS(OFF) (pF) typ DIP Charge Injection (pC) typ PLCC ICOM(ON) (nA) max Power Supply MSOP rON (Ω) typ Part Number mQFN Configuration QFN Functional Blocks Pin Count Package √ √ √ √ √ √ √ √ √ √ √ √ DG211B/212B 5V ~ 36V, ±5V ~ ± 20V Quad SPST 45 10 1 5 16 16 √ √ √ √ √ √ √ DG411/2/3 5V ~ 36V, ±5V ~ ± 20V Quad SPST 25 10 5 9 35 16 √ √ √ √ √ √ √ DG406 5V ~ 36V, ±5V ~ ± 20V 16:1 MUX 45 20 11 6 114 28 √ √ DG408 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 40 20 20 3 37 16 √ √ √ DG409 5V ~ 36V, ±5V ~ ± 20V Dual 4:1 MUX 40 10 20 3 25 16 √ √ √ DG506B 5V ~ 36V, ±5V ~ ± 20V 16:1 MUX 170 50 1 3 38 28 √ √ √ √ DG508B 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 180 50 2 3 18 16 DG509B 5V ~ 36V, ±5V ~ ± 20V Dual 4:1 MUX 180 50 2 3 11 16 SELECTOR GUIDE 3/26 √ √ √ √ √ √ √ √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Vortex Flow Sensors Vortex flow sensors are used in industrial applications including water management, air conditioning, and chemical production. The vortex sensor is often a piezoelectric crystal, which produces a small voltage pulse every time a vortex is created. Analog multiplexers are used in the charge amplifier. Key Performance Parameters and Vishay Advantages Vishay precision multiplexers provide ultra low leakage, low switching charge injection, and low parasitic capacitance that are an ideal fit for the charge amplifier. Since the vortex flow sensor is typically located remotely and is a space-constrained application, Vishay offers products that integrate the VL regulator and thus eliminate the need for an auxiliary voltage supply. Several device families are also available in space saving miniQFN packages allowing the customer to further shrink the solution size if needed. Block Diagram DG4051A 2.7V ~ 12V, ±2.7 ~ ±6V 8:1 MUX 60 5 0.25 7 31 √ 16 √ √ √ 7 31 √ 16 √ √ √ 3 17 √ 16 √ √ √ 16 √ √ √ √ √ √ DG4052A 2.7V ~ 12V, ±2.7 ~ ±6V Dual 4:1 MUX 60 5 0.25 3 13 DG411L, DG412L, DG413L 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 20 10 5 5 15 DG9251 2.7V ~ 16V, ±2.7 ~ ±8V 8:1 MUX 69 5 4.5 2.6 15 √ 16 √ DG9252 2.7V ~ 16V, ±2.7 ~ ±8V Dual 4:1 MUX 69 5 4.5 2.1 9.5 √ 16 √ DG406 5V ~ 36V, ±5V ~ ± 20V 16:1 MUX 45 20 11 6 114 √ 28 √ √ √ √ DG407 5V ~ 36V, ±5V ~ ± 20V Dual 8:1 MUX 45 20 11 6 57 √ 28 √ √ √ √ √ 16 √ √ √ √ DG408 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 40 20 20 3 37 √ 16 √ √ √ DG409 5V ~ 36V, ±5V ~ ± 20V Dual 4:1 MUX 40 10 20 3 25 √ 16 √ √ √ DG506B 5V ~ 36V, ±5V ~ ± 20V 16:1 MUX 170 50 1 3 38 √ 28 √ √ √ DG507B 5V ~ 36V, ±5V ~ ± 20V Dual 8:1 MUX 170 50 1 3 24 √ 28 √ √ √ DG508B 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 180 50 2 3 18 √ 16 √ √ √ √ √ √ √ √ √ √ DG509B 5V ~ 36V, ±5V ~ ± 20V Dual 4:1 MUX 180 50 2 3 11 √ 16 DG467/468 5V ~ 36V, ±5V ~ ± 20V SPST 7 5 21 30 76 √ 6 DG469/470 5V ~ 36V, ±5V ~ ± 20V SPDT 3.6 5 58 37 125 √ 8 SELECTOR GUIDE 4/26 Flow Type Selection 1 DIP 1 10 PLCC 10 17 MSOP 17 Dual 4:1 MUX SOIC 8:1 MUX 2.7V ~ 12V, ±2.7 ~ ±6V TSSOP/TSOP 2.7V ~ 12V, ±2.7 ~ ±6V DG409L QFN DG408L CD(ON) (pF) typ CS(OFF) (pF) typ mQFN Charge Injection (pC) typ Pin Count ICOM(ON) (nA) max Power Supply Integrated VL Configuration rON (Ω) typ Part Number Differential Mux Functional Blocks Package √ √ √ √ √ √ √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Magnetic Flow Sensors Magnetic flow sensors are used to measure flow rates for combustible or explosive liquids, often under hazardous conditions. They are mechanically obstruction free and can be equipped with abrasion-resistant liners, making them effective for measuring slurries and other erosive fluids. Key Performance Parameters and Vishay Advantages The signals developed at the EMF sensor can be in the range from tens of microvolts to millivolts while the output impedance of the sensor is normally in the megohm range. In such applications, Vishay offers a range of ultra-low leakage and parasitic capacitance devices that prevent signal distortion in the analog front end while dealing with weak signals from a high impedance source. In the programmable gain and reference signal switching blocks, low on-resistance is also advantageous and is offered in some of the device families. The products also integrate the VL regulator. Block Diagram TSSOP/TSOP SOIC 8:1 MUX 17 10 1 7 31 √ 16 √ √ √ √ 2.7V ~ 12V, ±2.7 ~ ±6V Dual 4:1 MUX 17 10 1 7 31 √ 16 √ √ √ √ DG411L, DG412L, DG413L 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 20 10 5 5 15 √ √ DG611A, DG612A, DG613A 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 72 0.25 0.5 2 9 √ 16 √ √ DG9424, DG9425, DG9426 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 1.8 10 38 49 89 √ 16 DG1408 4.5V ~ 25V, ±4.5 ~ ±15V 8:1 MUX 3 3 100 24 87 √ 16 DG406 5V ~ 36V, ±5V ~ ± 20V 16:1 MUX 45 20 11 6 114 √ 28 √ √ √ DG407 5V ~ 36V, ±5V ~ ± 20V Dual 8:1 MUX 45 20 11 6 57 √ 28 √ √ √ DG408 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 40 20 20 3 37 √ 16 √ √ √ √ √ √ DG409L 16 √ √ √ √ √ 5V ~ 36V, ±5V ~ ± 20V Dual 4:1 MUX 40 10 20 3 25 √ 16 √ √ 5V ~ 36V, ±5V ~ ± 20V 16:1 MUX 170 50 1 3 38 √ 28 √ √ √ DG508B 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 180 50 2 3 18 √ 16 √ √ √ DG467/468 5V ~ 36V, ±5V ~ ± 20V SPST 7 5 21 30 76 √ 6 DG469/470 5V ~ 36V, ±5V ~ ± 20V SPDT 3.6 5 58 37 125 √ 8 DG411/2/3 5V ~ 36V, ±5V ~ ± 20V Quad SPST 25 10 5 9 35 5/26 √ √ DG409 SELECTOR GUIDE √ √ DG506B 16 Programmable Gain Amp. QFN 2.7V ~ 12V, ±2.7 ~ ±6V DG408L Reference Switch CD(ON) (pF) typ Multiplexer CS(OFF) (pF) typ DIP Charge Injection (pC) typ PLCC ICOM(ON) (nA) max Power Supply MSOP rON (Ω) typ Part Number mQFN Configuration Pin Count Functional Blocks Integrated VL Package √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Ultrasonic Flow Sensors An ultrasound sensor measures and averages the difference in transit time between the pulses of ultrasound propagating or the frequency shift. This data is then used to determine the flow velocity. Key Performance Parameters and Vishay Advantages Since the channel select and flow direction switches require very high voltages and use mechanical relays, Vishay analog switches and multiplexers are typically used in the signal conditioning stages where low parasitic capacitance and low leakage are the critical parameters. These performance characteristics of the Vishay devices result in minimal distortion of the weak analog signal as it is conditioned in the transimpedance amplifier, filtering, and gain control sub circuits. Block Diagram SOIC 31 √ 16 √ √ √ 31 √ 16 √ √ √ 2 9 √ 16 √ √ 5 5 15 √ √ 100 24 87 √ 16 3 37 √ 16 √ √ √ 3 25 √ 16 √ √ √ 3 18 √ 16 √ √ √ 11 6 114 √ 28 √ √ 11 6 57 √ 28 √ √ 1 3 38 √ 28 2.7V ~ 12V, ±2.7 ~ ±6V 8:1 MUX 17 10 1 DG409L 2.7V ~ 12V, ±2.7 ~ ±6V Dual 4:1 MUX 17 10 1 DG611A, DG612A, DG613A 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 72 0.25 0.5 DG411L, DG412L, DG413L 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 20 10 DG1408 4.5V ~ 25V, ±4.5 ~ ±15V 8:1 MUX 3 3 DG408 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 40 20 20 DG409 5V ~ 36V, ±5V ~ ± 20V Dual 4:1 MUX 40 10 20 DG508B 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 180 50 2 DG406 5V ~ 36V, ±5V ~ ± 20V 16:1 MUX 45 20 DG407 5V ~ 36V, ±5V ~ ± 20V Dual 8:1 MUX 45 20 DG506B 5V ~ 36V, ±5V ~ ± 20V 16:1 MUX 170 50 6/26 √ 16 √ √ PLCC TSSOP/TSOP 7 7 DG408L CS(OFF) (pF) typ DIP Integrated VL Charge Injection (pC) typ MSOP CD(ON) (pF) typ QFN ICOM(ON) (nA) max Power Supply mQFN rON (Ω) typ Part Number SELECTOR GUIDE Configuration Pin Count Package √ √ √ √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Vehicle Diagnostics Vehicle diagnostic systems are now increasingly sophisticated and allow a technician to quickly ascertain the health of a vehicle with minimal effort. Analog switches and mutiplexers allow a single system to be used for multiple vehicle brands and types by switching the on-board diagnostic (OBD) connector to the desired protocol and the correct transceiver interface. Key Performance Parameters and Vishay Advantages Vishay analog switches and multiplexers provide broad array of solutions for vehicle diagnostic applications, with features such as wide operating voltage ranges, low switch resistance and parasitic capacitance, and compact package options. The operating voltage range for diagnostic systems is generally 5 V to 24 V for cars and up to 32 V for trucks. The low switch on-resistance and low parasitic capacitance of Vishay analog switches and multiplexers minimize signal insertion loss and distortion. They are also important for communication line impedance matching. Block Diagram CD(ON) (pF) typ Integrated VL QFN TSSOP/TSOP 4.5V ~ 25V 8:1 MUX 3 20 24 121 √ 16 √ √ 4.5V ~ 25V Dual 4:1 MUX 3 20 24 90 √ 16 √ √ DG1411, DG1412, DG1413 4.5V ~ 25V 4 x SPST 1.5 12 11 87 √ 16 √ √ DG408 5V ~ 36V 8:1 MUX 40 20 3 37 √ 16 √ √ √ DG409 5V ~ 36V Dual 4:1 MUX 40 20 3 25 √ 16 √ √ √ DG451, DG452, DG453 5V ~ 36V 4 x SPST 3.8 22 31 103 16 √ √ √ DG454, DG455, DG456 5V ~ 36V 4 x SPST 3.8 22 31 103 16 √ √ √ DG411, DG412, DG413 5V ~ 36V 4 x SPST 25 5 9 35 16 √ √ √ DG1408 DG1409 SELECTOR GUIDE 7/26 √ DIP CS(OFF) (pF) typ MSOP Charge Injection (pC) typ Single Rail V+ Range SOIC rON (Ω) typ Part Number mQFN Configuration Pin Count Package VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Industrial Weighing Scales Industrial scales are used in a variety of applications from weighing entire trucks down to high-precision scales capable of weighing substances at the atomic/molecular level. Accuracy is very important and the analog multiplexer plays an important role in the overall system accuracy and measurement repeatability. Key Performance Parameters and Vishay Advantages In the weighing scale system the analog multiplexer is used switch the input of the ADC between the constant voltage source, the output terminals of the bridge, and the reference voltage. The multiplexer can also be used to switch between additional strain gauge inputs. In this application, matching between channels is very important, and so is a low and flat switch resistance over the signal range. Vishay has several families of devices optimized for these performance characteristics to enable better measurement accuracy. Block Diagram 8:1 MUX 17 10 1 7 31 16 √ √ √ 2.7V ~ 12V, ±2.7 ~ ±6V Dual 4:1 MUX 17 10 1 7 31 16 √ √ √ DG411L, DG412L, DG413L 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 20 10 5 5 15 16 √ √ DG9424/9425/9426 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 1.8 10 38 49 89 16 √ ICOM(ON) (nA) max Charge Injection (pC) typ CS(OFF) (pF) typ CD(ON) (pF) typ DIP SOIC 2.7V ~ 12V, ±2.7 ~ ±6V DG409L rON (Ω) typ MSOP TSSOP/TSOP DG408L Configuration mQFN Power Supply Pin Count Part Number QFN Package √ DG1408 4.5V ~ 25V, ±4.5 ~ ±15V 8:1 MUX 3 3 25 18 87 16 √ √ DG1411/1412/1413 4.5V ~ 25V, ±4.5 ~ ±15V Quad SPST 1.5 2 20 11 87 16 √ √ DG408 5V ~ 36V, ±5V ~ ± 20V 8:1 MUX 40 20 20 3 37 16 √ √ √ DG409 5V ~ 36V, ±5V ~ ± 20V Dual 4:1 MUX 40 10 20 3 25 16 √ √ √ DG411/2/3 5V ~ 36V, ±5V ~ ± 20V Quad SPST 25 10 5 9 35 16 √ √ √ DG454/5/6 5V ~ 36V, ±5V ~ ± 20V Quad SPST 3.8 2.5 22 31 103 16 √ √ DG469/470 5V ~ 36V, ±5V ~ ± 20V SPDT 3.6 5 58 37 125 16 SELECTOR GUIDE 8/26 √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers UV/Vis Spectrophotometers Ultraviolet–visible spectroscopy or ultraviolet-visible spectrophotometry is routinely used for the quantitative determination of different substances, making it a useful tool in analytic chemistry and medical applications. Key Performance Parameters and Vishay Advantages Vishay provides precision analog switches and multiplexers optimized for both low on-resistance and excellent switching characteristics as required by the signal pre-amplifier and gain control blocks in the circuits that convert light to electrical signals and compare the signals from the test sample to a reference cell. Analog switches and multiplexers are also used to switch the inputs of temperature sensing and other signals that determine the test conditions. Block Diagram Functional Blocks ICOM(ON) (nA) max Charge Injection (pC) typ CS(OFF) (pF) typ CD(ON) (pF) typ MSOP TDFN Switch MUX Transimpedance Amplifier DG721 1.8V ~ 5.5V Dual SPST, NO 2.5 0.35 2 8 22 8 √ √ √ √ DG722 1.8V ~ 5.5V Dual SPST, NC 2.5 0.35 2 8 22 8 √ √ √ √ DG723 1.8V ~ 5.5V Dual SPST, NC/NO 2.5 0.35 2 8 22 8 √ √ √ √ DG408L 2.7V ~ 12V, ±2.7 ~ ±6V 8:1 MUX 17 10 1 7 31 16 √ √ √ √ √ √ DG409L 2.7V ~ 12V, ±2.7 ~ ±6V Dual 4:1 MUX 17 10 1 7 31 16 DG9424/9425/9426 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 1.8 10 38 49 89 16 DG611A, DG612A, DG613A 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 72 0.25 0.5 2 9 16 √ √ √ √ DG636 2.7V ~ 12V, ±2.7 ~ ±6V Dual SPDT 70 0.5 0.1 2.1 11 14/16 DG411L, DG412L, DG413L 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 20 10 5 5 15 16 DG604 2.7V ~ 12V, ±2.7 ~ ±6V 4:1 MUX 70 2 0.7 2.7 13.8 14/16 DG1411/1412/1413 4.5V ~ 24V, ±4.5V ~ ± 15V Quad SPST 1.5 2 20 11 87 16 DG1408 4.5V ~ 25V, ±4.5 ~ ±15V 8:1 MUX 3 3 25 18 87 16 DG467/468 5V ~ 36V, ±5V ~ ± 20V SPST 7 10 21 30 76 6 DG469/470 5V ~ 36V, ±5V ~ ± 20V SPDT 3.6 5 58 37 125 8 SELECTOR GUIDE 9/26 SOIC rON (Ω) typ TSSOP/TSOP Configuration QFN Power Supply mQFN Part Number Pin Count Package √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Glucose Meters A glucose meter is just one example of a portable meter that plays an important role in health monitoring. Devices such as these play a critical role in reducing the occurrence rate and severity of long term complications from progressive diseases. Key Performance Parameters and Vishay Advantages In portable metering applications Vishay offers low voltage analog switches with low resistance, low switching noise, and ultra-low leakage levels. The devices are used in the input multiplexer (strip switching), transimpedance amplifier gain control, precision amplification, and bias control. Compact device packages help to enable space-constrained portable designs. Block Diagram ICOM(ON) (nA) max Charge Injection (pC) typ CS(OFF) (pF) typ CD(ON) (pF) typ DG2537 ± 1.8V ~ ± 2.75V Dual SPST, NO 2.5 0.35 2 8 22 10 √ DG2538 ± 1.8V ~ ± 2.75V Dual SPST, NC 2.5 0.35 2 8 22 10 √ DG2539 ± 1.8V ~ ± 2.75V Dual SPST, NC/NO 2.5 0.35 2 8 22 10 √ DG721 1.8V ~ 5.5V Dual SPST, NO 2.5 0.35 2 8 22 8 √ √ DG722 1.8V ~ 5.5V Dual SPST, NC 2.5 0.35 2 8 22 8 √ √ DG723 1.8V ~ 5.5V Dual SPST, NC/NO 2.5 0.35 2 8 22 8 √ √ DG611A, DG612A, DG613A 2.7V ~ 12V, ±2.7 ~ ±6V Quad SPST 72 0.25 0.5 2 9 16 SELECTOR GUIDE 10/26 √ √ TDFN rON (Ω) typ MSOP Configuration SOIC Power Supply mQFN Part Number Pin Count TSSOP/TSOP Package √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Low Charge Injection Devices Devices in this family are optimized for precision switching applications with minimal charge injection during both ON and OFF transitions. The devices demonstrate superior low switching glitches and fast settling time. They are ideal for circuits such as sample and hold, data acquisition, and precision ADC input multiplexing that are commonly seen in industrial control and automation, medical healthcare, and instruments. The DG506B/507B and DG508B/509B stand for the best in class high voltage precision multiplexers. The devices feature low leakage, 3 pF switch off source capacitance, and 1 pC charge injection. New low leakage high precision analog multiplexers (DG408L, DG4051A series, DG9251 series) and switches (DG611A series, DG636) feature low charge injection (<1 pC) and low switch capacitance (<3 pF). They are ideal for ±5 V and +12 V operation. The new products come in SOIC, TSOP, and miniQFN packages. Charge Injection Test Circuit DG4051A Charge Injection vs. Analog Voltage +5V V+ S D VO IN Vg Q INJ - Charge Injection (pC) Rg CL 1 nF 3V V- GND -5V 2.00 1.75 DG4051A 1.50 1.25 1.00 VCC = + 5.0 V 0.75 VEE = - 5.0 V 0.50 0.25 0.00 VCC = + 3.0 V - 0.25 VEE = 0 V - 0.50 - 0.75 - 1.00 - 1.25 - 1.50 - 1.75 - 2.00 -5 -4 -3 -2 -1 0 1 VCC = + 5.0 V VEE = 0 V 2 3 4 5 V S - Analog Voltage (V) 7 0.5 2.2 √ √ 30 -45 @ 240 Mhz 900 DG2001 1 x SPDT 3 1 17 √ √ 53 -70 120 √ √ √ √ DG2012 1 x SPDT 1 7 20 √ √ 38 -64 110 √ DG9411 1 x SPDT 7 5 7 √ √ 15 -70 200 √ DG2018 DG2019 4 x SPDT 6 3 9 √ √ 65 -53 150 DG2034 4:1 MUX 4 5 14 √ √ 45 -77 100 DG2041 DG2042 DG2043 4 x SPDT 1 1 26 √ √ 82 -94 200 DG2303 1 x SPST 5 0.5 9 √ √ 1.8 typ -- 200 DG2511 1 x SPDT 1 3 19 √ √ 39 -64 80 √ DG2512 DG2513 1 x SPST 1 3 19 √ √ 39 -64 80 √ DG2537 DG2538 DG2539 2 x SPST 2.5 2 8 √ √ 40 -92 366 √ DIP 2 x SPDT MICRO FOOT DG2723 SC-70/SC89 900 Mini QFN -45 @ 240 Mhz QFN/DFN 30 MSOP √ SOT-23 / TSOP BW (MHz) √ SOIC Cross- talk @ 1 MHz (dB) 2.2 TSSOP tON Max. (ns) 0.5 ± 15 V 7 16 V DPDT 12 V 5V DG2722 ±5V Configuration ± 2.5 V Part Number ≤3V Package Option COFF (pF) typ Dynamic Performance Charge Injection (pC) typ Characterization Voltages rON (Ω) typ Basic Parameters √ √ √ √ √ √ √ Note: Products in the tables of this document are sorted in the order of increasing operating voltage range followed by configuration SELECTOR GUIDE 11/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Low Charge Injection Devices (cont.) 2 8 √ √ 55 -92 319 DG611A DG612A DG613A 4 x SPST 72 0.5 2 √ √ √ √ 75 -90 @ 10 MHz 720 √ √ √ √ √ √ √ DG636 2 x SPDT 85 0.1 5 √ √ √ √ 130 -90 610 DG9432 DG9433 DG9434 2 x SPST 19 0.36 7.5 √ √ √ √ 40 -96 200 DG411L DG412L DG413L 4 x SPST 20 5 5 √ √ √ √ 50 -95 -- √ DG4051A 8:1 MUX 60 2 2 √ √ √ √ 175 -95 330 √ √ DG4052A Dual 4:1 MUX 60 2 2 √ √ √ √ 175 -95 450 √ √ DG4053A Triple 2:1 MUX 60 2 2 √ √ √ √ 175 -95 730 √ DG408L 8:1 MUX 17 1 7 √ √ √ √ 55 -82 280 √ √ DG409L Dual 4:1 MUX 17 1 7 √ √ √ √ 55 -82 280 √ √ √ 400 √ √ √ √ √ √ √ √ 65 -81 @ 10 Mhz √ √ 35 -98 500 √ √ √ √ 98 -90 314 √ √ √ √ √ 98 -90 449 √ √ √ √ √ 98 -90 480 √ 9 √ √ √ 175 -85 -- √ √ 4 √ √ √ 220 -95 @ 100 KHz -- √ √ √ √ -- √ √ √ DG604 4:1 MUX 70 0.7 2.7 DG611 DG612 DG613 4 x SPST 18 4 2 DG9251 8:1 MUX 90 4 2.7 DG9252 Dual 4:1 MUX 90 4 2.2 DG9253 3 x SPDT 90 4 2 DG411 DG412 DG413 4 x SPST 25 5 DG441B DG442B 4 x SPST 45 1 DG444B DG445B DIP 2.5 MICRO FOOT 2 x SPST SC-70/SC89 300 Mini QFN -78 QFN/DFN 52 MSOP √ SOT-23 / TSOP BW (MHz) √ SOIC Cross- talk @ 1 MHz (dB) 12 TSSOP tON Max. (ns) 1 ± 15 V 2.2 16 V 5V 2 x SPDT DG721 DG722 DG723 12 V ≤3V DG3516 DG3517 ±5V Configuration ± 2.5 V Part Number COFF (pF) typ Package Option Charge Injection (pC) typ Dynamic Performance rON (Ω) typ Basic Parameters √ √ √ √ √ √ √ √ √ 250 -95 @ 100 KHz √ √ √ √ 130 N/A -- √ √ √ 146 -80 -- 6 √ √ 123 -90 √ √ 11 6 √ √ 123 -90 √ √ 40 20 3 √ √ 115 -85 √ √ √ 40 20 3 √ √ 115 -85 √ √ √ 16:1 MUX 170 1 3 √ √ √ 190 -84 114 √ √ DG507B Dual 8:1 MUX 170 1 3 √ √ √ 190 -84 217 √ √ DG508B 8:1 MUX 180 2 3 √ √ √ √ 250 -88 200 √ √ √ DG509B Dual 4:1 MUX 180 2 3 √ √ √ √ 250 -88 200 √ √ √ DG201B 4 x SPST 45 1 5 √ √ √ √ 300 -95 @ 100 KHz -- √ √ DG211B DG212B 4 x SPST 45 1 5 √ √ √ √ 300 -75 -- √ √ √ DG213 4 x SPST 45 1 5 √ √ √ √ 130 -95 @ 100 KHz -- √ √ √ DG333A DG333AL 4x SPDT 25 2 8 √ √ √ √ 175 -80 -- √ √ √ 4 x SPST 45 1 5 DG447 DG448 1 x SPST 17 10 8 DG449 1 x SPDT 38 5 8 DG406 16:1 MUX 45 11 DG407 Dual 8:1 MUX 45 DG408 8:1 MUX DG409 Dual 4:1 MUX DG506B √ √ √ √ Note: Products in the tables of this document are sorted in the order of increasing operating voltage range followed by configuration SELECTOR GUIDE 12/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Low On-Resistance Devices Devices in this family have a low on-resistance (typically 0.3 Ω to 8 Ω). A wide range of operating voltages is available for various applications such as audio and video switching, programmable gain control, power routing, and mechanical relay replacement. The parts achieve low on-resistance levels while maintaining low leakage, parasitic capacitance, charge injection, and fast switching speeds. The minimized parasitic reduces signal distortion. It minimizes the capacitive load at the operational amplifier output in programmable gain circuits thus improving response time and signal fidelity. The DG1411/1412/1413 series of quad 1.5Ω SPST ± 15 V switches have a flatness of 0.3 Ω, precise channel matching of less than 0.1 Ω, switch ON and OFF leakage of 30 pA, and low parasitic capacitances of 11 pF in off state and 87 pF in ON state. The devices, -3 dB bandwidth is 170 MHz. The DG1411/1412/1413 are ideal for low distortion audio and video switching, wide dynamic programmable gain control, relay replacement, and high-end data acquisition systems. DG1411/1412/1413 rON vs. Analog Input Voltage when Powered with Dual Rails DG1411/1412/1413 rON vs. Analog Input Voltage when Powered with Single Rails 3.0 7 V+ = +12V V- = -12V 2.0 1.5 V+ = +13.5V V- = -13.5V 1.0 V+ = +15V V- = -15V V+ = +12V V- = -12V 6 RON - On-Resistance (Ω) RON - On-Resistance (Ω) 2.5 V+ = +16.5V V- = -16.5V 5 4 3 V+ = +13.5V V- = -13.5V V+ = +15V V- = -15V 2 V+ = +16.5V V- = -16.5V 0.5 1 0.0 -0.5 3.5 7.5 11.5 0 15.5 0 20 DG2016 DG2026 2 x SPDT 2.4 DG2018 DG2019 2 x DPDT DG2032 2 x SPDT DG2034 4:1 MUX DG2041 DG2042 DG2043 14 Characterization Voltage Dynamic Performance Package Options 4 7.5 √ √ 52 -67 -72 180 √ 50 2.4 15 √ √ 59 -78 -82 200 √ 50 4 14 √ √ 45 -73 -77 √ 50 4 x SPDT 1 26 √ √ 42 -63 -94 200 √ 50 DG2303 1 x SPST 5 9 √ √ 1.8 typ -50 -- 200 √ 50 DG2307 1 x SPDT 4 6.5 √ √ 6.2 -60 @ 10 MHz -60 @ 10 MHz 250 √ 50 DG2511 1 x SPDT 1 19 √ √ √ 35 -58 -64 90 √ 150 DG2512 DG2513 1 x SPST 1 19 √ √ √ 35 -58 -64 90 √ 150 SELECTOR GUIDE √ 13/26 √ 50 √ √ √ √ IOUT (mA) 200 Mini QFN -82 SC-70/SC89 -81 QFN/DFN 52 TSOP √ MSOP √ SOIC 14 SOT-23 110 TSSOP 120 -64 ± 15 V -70 -63 16 V -71 38 12 V 40 √ ±5V √ √ √ ± 2.5 V √ 1.8 V BW (MHz) 17 1 12 Cross- talk @ 1 MHz (dB) 3 1 x SPDT 10 Off Isolation @ 1 MHz (dB) 1 x SPDT DG2012 8 tON Max. (ns) COFF (pF) typ DG2001 6 VD - Analog Voltage (V) 4.3V / 5 V Config 4 3V Part Number rON (Ω) typ Basic Parameters 2 Current -4.5 VD - Analog Voltage (V) MICRO FOOT -16.5 -12.5 -8.5 100 50 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers DG2535 DG2536 2 x SPDT 0.4 145 DG2537 DG2538 DG2539 2 x SPST 2.5 8 DG2612 DG2613 1 x SPDT 1 36 DG2706 2 x DPDT 3 DG2707 Dual 4:1 MUX 2.8 DG2714 1 x SPDT DG2715 DG2716 1 x SPST DG2717 1 x SPDT MICRO FOOT √ √ 40 -67 -92 366 √ √ √ 63 -46 -42 80 16 √ √ 55 -70 -90 190 √ 250 16 √ √ 55 -70 -90 120 √ 300 0.85 30 √ √ √ 54 -64 -64 110 √ 200 0.4 72 √ √ √ 29 -57 -60 -- √ 200 0.45 76 √ √ √ 48 -54 -57 110 √ 200 -95 @ 100 KHz 62 √ 350 √ IOUT (mA) √ √ SC-70/SC89 180 Mini QFN -60 QFN/DFN -60 MSOP 90 TSOP √ SOT-23 √ SOIC 105 TSSOP -64 ± 15 V -59 16 V 85 12 V √ ±5V √ ± 2.5 V BW (MHz) 17 Cross- talk @ 1 MHz (dB) 0.8 Off Isolation @ 1 MHz (dB) SPTT, 3:1 MUX tON Max. (ns) 1.8 V DG2522 Package Options 4.3V / 5 V Config Dynamic Performance 3V Part Number COFF (pF) typ Characterization Voltage rON (Ω) typ Basic Parameters Current Low On-Resistance Devices (cont.) 300 √ 300 √ 50 √ 150 DG2725 2 x SPDT 0.7 24 √ √ √ 95 -85 @ 100 KHz DG2727 DG2728 DG2729 2 x SPST 0.65 31 √ √ √ 38 -58 -64 110 √ 300 DG2735 DG2736 2 x SPDT 0.6 55 √ √ 80 -53 -60 50 √ 250 DG2741 DG2742 DG2743 2 x SPST 0.8 81 √ √ √ 35 -56 -89 230 DG2747 DG2748 DG2749 2 x SPST 0.4 55 √ √ √ 25 -52 -90 93 √ 300 DG2750 2 x SPDT 1.1 25 √ √ √ 65 -55 @ 300 KHz -61 @ 300 KHz 34 √ 250 DG2753 3 x SPDT 0.7 35 √ √ √ 60 -90 -90 100 √ √ 300 DG1411, DG1412, DG1413 4 x SPST 1.5 12 150 -80 -100 170 √ √ 250 SELECTOR GUIDE √ √ √ 14/26 √ √ 200 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Application Spotlight: Mechanical Relay Replacement Many electronic designs can benefit from the replacement of mechanical relays by analog switches. The following devices feature low switch resistance and are bi-directional. Typically these devices can handle from 50 mA to 300 mA of current and are suitable for both signal and power routing, and relay replacement. The DG469 and DG470 high-voltage, single- and dual-supply SPDT analog switches offer 4.2 Ω maximum on-resistance with a typical flatness of 0.4 Ω. Both devices are rated for 120 mA continuous current making them ideal for relay replacement and power routing. The DG2520 and DG2521 are 5 V SPDT switches in the TSOP-6 package that integrate an overcurrent protection feature. The DG2521 features make-before-break switching for designs requiring a continuous closed loop connection. Mechanical vs. Electronic Switches Mechanical Electronic • No switch bounce • Reliability • Low power consumption • Low cost • Miniature size Disadvantages • Wear and tear • Contact bounce • Slow • High power consumption • Bulky • Low current: < 500 mA / switch • Limited voltage range: < 44 V • Off isolation • On-resistance 2 x DPDT 87 0.81 √ √ 4.3 V 75 -49 -96 50 √ 300 90 -60 -60 180 √ 250 √ 300 0.4 DG2735 DG2736 2 x SPDT 0.6 DG2747 DG2748 DG2749 2 x SPST 0.4 55 √ √ 4.3 V 10 55 √ √ √ 35 -52 -90 93 300 DG2753 3 x SPDT 0.7 25 35 √ √ √ 60 -90 -90 100 DG2741 DG2742 DG2743 2 x SPST 0.8 6 81 √ √ √ 60 -56 -89 230 DG2750 2 x SPDT 1.1 25 √ √ √ 65 -55 @ 300 KHz -61 @ 300 KHz 34 √ 250 DG2720 1 x DPDT 6 2.6 √ √ √ 30 30 700 √ 300 SELECTOR GUIDE 15/26 √ IOUT (mA) DG2788 DG2789 √ MICRO FOOT 70 SC-70/SC89 -50 Mini QFN -50 QFN/DFN 60 MSOP BW (MHz) 4.3 V SOT-23 / TSOP Cross- talk @ 1 MHz (dB) √ SOIC Off Isolation @ 1 MHz (dB) √ TSSOP tON Max. (ns) 108 16 V 160 12 V 5V 2 x DPDT 0.25 Config ±5V 3V DG2799 Part Number ± 2.5V ≤ 1.8 V Package Options COFF (pF) typ Dynamic Performance Charge Injection (pC) typ Characterization Voltages rON (Ω) typ Basic Parameters Current Advantages • High current • High voltage • High off isolation • Zero on-resistance • Low capacitance √ √ 300 √ 200 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers 4 16 √ 56 -70 -90 191 √ 300 21 145 40 -60 -60 180 DG2535 DG2536 2 x SPDT 0.35 √ √ √ DG2032 2 x SPDT 2.4 38 15 √ √ √ 59 -78 -82 200 DG2016 DG2026 2 x SPDT 2.4 79 14 √ √ √ 52 -81 -82 200 DG2041 DG2042 DG2043 4 x SPST 1 1 4 √ √ √ 42 -63 -94 200 DG2018 DG2019 2 x DPDT 6 3 9 √ √ √ 66 -54 -53 DG2034 4:1 MUX 4 5 14 √ √ √ 45 -73 DG2511 1 x SPDT 1.3 3 21 √ √ √ 39 -58 √ 300 √ 50 √ √ IOUT (mA) 3 MICRO FOOT DG2707 SC-70/SC89 250 Mini QFN √ QFN/DFN 190 MSOP -90 SOT-23 / TSOP BW (MHz) -70 SOIC Cross- talk @ 1 MHz (dB) 55 TSSOP Off Isolation @ 1 MHz (dB) √ 16 V 16 12 V 4 ±5V 3 2 x 4:1 MUX 5V 2 x DPDT 3V DG2706 ± 2.5V Config ≤ 1.8 V Part Number tON Max. (ns) Package Options COFF (pF) typ Dynamic Performance Charge Injection (pC) typ Characterization Voltages rON (Ω) typ Basic Parameters Current High Current Switch Devices (cont.) 50 √ 50 151 √ 50 -77 -- √ 50 -64 80 √ 150 DG2612 DG2613 1 x SPDT 1 2.4 36 √ √ √ 30 -46 -42 80 √ 150 DG2012 1 x SPDT 1 7 22 √ √ √ 39 -63 -64 110 √ 100 DG2520 DG2521 1 x SPDT 0.4 224 50 √ √ 40 -51 -57 224 √ 50 DG9411 1 x SPDT 7 5 7 √ √ √ 40 -75 -68 200 DG2001 1 x SPDT 3 1 17 √ √ √ 53 -71 -70 120 DG2303 1 x SPDT 5 0.5 9 √ √ √ 1.8 / typ -50 - 200 DG4157 1 x SPDT 0.95 50 20 √ √ 60 -58 -63 117 √ DG2522 SPTT, 3:1 MUX 0.8 27 17 √ √ √ 85 -59 -64 105 √ DG9424 DG9425 DG9426 4 x SPST 1.8 38 49 √ √ √ 65 -56 -77 150 DG3516 DG3517 2x SPDT 2.5 1 12 √ √ √ 45 -74 -78 300 DG9408 8:1 MUX 4 29 23 √ √ √ √ √ √ 75 -80 @ 100 KHz -85 @ 100 KHz -- √ √ √ √ 50 √ 50 √ 50 √ 200 300 √ 100 √ √ 100 DG9051 8:1 MUX 30 38 4 √ √ √ √ √ √ 55 -78 -83 -- DG9421 DG9422 1 x SPST 2 320 32 √ √ √ √ √ √ 50 -60 -- 50 DG451 DG452 DG453 4 x SPST 3.8 22 31 √ √ √ √ 118 -60 -85 -- √ √ 100 DG454 DG455 DG456 4 x SPST 3.8 22 31 √ √ √ √ 118 -60 -85 -- √ √ 100 DG1411, DG1412, DG1413 4x SPST 1.5 30 12 √ √ √ 150 -80 -100 170 √ SELECTOR GUIDE 16/26 √ 100 100 √ 50 √ 250 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers High-Bandwidth Devices This category of devices is optimized for high bandwidth applications, such as high-speed mixed-signal switching and filtering. The devices support frequencies up to 1 GHz. Devices optimized for this application require moderately low on-resistance to reduce signal insertion losses, low parasitic capacitance, high cross talk rejection, and high off isolation. The DG611A series designed for operation with either 12 V or ±5 V condition achieves a -3 dB bandwidth of 720 MHz. The DG9253 series which operates from ± 2.7 V to ± 8 V or single 2.7 V to 16 V supplies offers -3 dB bandwidth of 480 MHz. √ √ 30 -30 @ 240 MHz -45 @ 240 MHz 900 √ DG2723 2 x SPDT 7 2.5 √ √ 30 -30 @ 240 MHz -45 @ 240 MHz 700 √ 30 -30 @ 240 MHz -45 @ 240 Mhz 900 √ DG2730 √ √ DPDT 7 2.2 √ DG2706 2 x DPDT 3 16 √ 55 -70 -90 190 √ DG2707 2 x 4:1 MUX 3 16 √ 55 -70 -90 120 √ DG2737 DG2738 DG2739 2 x SPST 6 4.4 √ √ 60 -79 -109 720 DG9411 1 x SPDT 7 7 √ √ 40 -75 -68 200 DG2001 1 x SPDT 3 17 √ √ 53 -71 -70 120 DG2018 DG2019 2 x DPDT 6 9 √ √ 65 -54 -53 150 DG721 DG722 DG723 2 x SPST 2.5 8 √ √ √ 55 -67 -92 319 √ DG2537 DG2538 DG2539 2 x SPST 2.5 8 √ √ √ 40 -67 -92 366 √ √ √ DG3157 1 x SPDT 8 7 √ √ 10.2 -58 -59 250 DG3157A 1 x SPDT 6 7 √ √ 60 -57 -64 300 DG604 4:1 MUX 85 5 √ √ DG611 DG612 DG613 4 x SPST 18 3 DG611A DG612A DG613A 4 x SPST 85 5 √ √ √ √ √ √ √ √ √ √ 80 -75 -70 280 √ √ √ 35 -93 -98 500 √ √ √ 75 - 62 @ 10 MHz - 90 @ 10 MHz 720 √ √ √ √ √ DG636 2 x SPDT 85 5 √ √ √ √ 130 -90 - 90 610 √ DG4051A 8:1 MUX 60 2 √ √ √ √ 175 -90 -95 330 √ √ √ DG4052A Dual 4:1 MUX 60 2 √ √ √ √ 50 -90 -95 450 √ √ √ DG4053A 3 x SPDT 60 2 √ √ √ √ 175 -90 -95 730 √ √ √ DG9451 8:1 MUX 68 1 √ √ √ √ 152 -90 -90 270 √ DG9453 3 x SPDT 68 1 √ √ √ √ 152 -90 -90 552 √ SELECTOR GUIDE 17/26 PLCC 2.2 Mini QFN 7 MSOP DPDT QFN/DFN DG2722 SOIC 620 TSSOP -85 BW (MHz) 110 -80 Cross- talk -64 30 16 V -64 √ √ ± 15 V 54 √ 12 V √ 2.6 ±5V 30 6 ≤3V 0.85 DPDT 4.3V / 5 V 1x SPDT ± 2.5 V DG2714 DG2720 MICRO FOOT Package Options SC-70/SC89 @ 1 MHz (dB) Off Isolation @ 1 MHz (dB) tON Ma√. (ns) Dynamic Performance 1.8 V Config Characterization Voltage COFF (pF) typ Part Number rON (Ω) typ Basic Parameters √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers High-Bandwidth Devices (continued) √ 2.7 √ √ √ √ 98 -90 -90 314 √ 2.2 √ √ √ √ 98 -90 -90 449 √ 90 2 √ √ √ √ 98 -90 -90 480 16:1 MUX 170 3 √ √ √ 190 -85 -84 114 √ √ DG507B Dual 8:1 MUX 170 3 √ √ √ 190 -85 -84 217 √ √ DG508B 8:1 MUX 180 3 √ √ √ 250 -81 -88 200 √ √ √ DG509B Dual 4:1 MUX 180 3 √ √ √ 250 -81 -88 200 √ √ √ DG1411 DG1412 DG1413 4 x SPST 1.5 12 √ 150 -80 -100 170 √ SELECTOR GUIDE √ √ 18/26 PLCC 575 MICRO FOOT -70 @ 10 MHz Mini QFN -62 @ 10 MHz SOIC 110 MSOP √ TSSOP √ ± 15 V √ ± 2.5 V √ 1.8 V √ SC-70/SC89 DG506B QFN/DFN 3 x SPDT BW (MHz) DG9253 Cross- talk 90 @ 1 MHz (dB) 90 Dual 4:1 MUX Off Isolation 8:1 MUX DG9252 @ 1 MHz (dB) DG9251 tON Ma√. (ns) 2.1 16 V 301 12 V 2 x SPDT Package Options ±5V COFF (pF) typ DG9236 Dynamic Performance ≤3V Config Characterization Voltage 4.3V / 5 V Part Number rON (Ω) typ Basic Parameters √ √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Low-Voltage Devices for Consumer Handheld and Portable Instrumentation -12 -12 -12 -12 -12 -12 -12 -12 -12 -12 D D 0.5 1.0 D The DG721/2/3 and DG2537/8/9 are 5 V, 4 Ω, low-voltage dual SPST switches. The DG2537/8/9 operate with a dual power supply. They are optimized for flat switch on-resistance together with low leakage and parasitic capacitance. They are ideal for low-voltage analog front end and sensor signal switching in portable healthcare devices and instruments. 1.0 1.5 1.5 2.0 VS (V) VS (V) 2.0 2.5 2.5 3.0 4.5 4.5 4.0 4.0 3.5 3.5 3.0 3.0 2.5 2.0 2.5 2.0 1.5 1.5 1.0 1.0 0.5 0.5 0.0 3.00.0 0.0 0.0 0.5 1.0 0.5 1.5 1.0 2.0 1.5 2.5 2.0 3.0 2.5 3.5 3.0 3.5 VD - Analog VD -Voltage Analog (V) Voltage (V) DG723 Switch On Capacitance vs Analog Voltage DG723 Channel Off Leakage vs Analog Voltage 29 On Switch Capacitance DG723 RDS DG723 , 3.3 VRDS, 3.3 V 2.0 x 10 -12 1.5 x 10 -12 27 25 DG723 23 21 19 ID(off) at V+ 3.3 V Qinj - Charge Injection (pC) -13 5.0 RDS(on) (Ω) -26 -13 DG723, V+ DG723, = 3.0 (pC) V+ = 3.0 (pC) RDS(on) (Ω) -13 -26 DG723 Ron vs Analog Voltage 5.0 Channel Off Leakage (A) -13 D(off) 12 11 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 0.0 0.5 1.0 x 10 -13 DG723 5.0 x 10 -26 - 1.0 x 10 -13 - 5.0 x 10 -12 - 1.0 x 10 -12 - 1.5 x 10 -12 - 2.0 x 10 -12 0.8 1.2 1.6 2.0 2.4 2.8 - 2.5 x 10 -12 0.0 3.2 0.4 0.8 VD - Analog Voltage (V) 2.0 2.4 √ 53 -71 -70 120 √ √ 39 -63 -64 110 DG2016 DG2026 2 x SPDT 2.4 79 14 √ √ 52 -81 -82 200 DG2018 DG2019 2 x DPDT 6 3 9 √ √ 66 -54 -53 151 DG2034 4:1 MUX 4 5 14 √ √ 45 -73 -77 -- DG2041 DG2042 DG2043 4 x SPST 1 1 26 √ √ 42 -63 -94 200 DG2303 1 x SPDT 5 0.5 9 √ √ 1.8 / typ -50 - 200 DG2511 1 x SPDT 1 3 19 √ √ 39 -58 -64 80 √ DG2512 DG2513 1 x SPST 1 3 19 √ √ 90 -58 -64 80 √ DG2535 DG2536 2 x SPDT 0.4 21 145 √ √ √ 40 -60 -60 180 √ DG2537 DG2538 DG2539 2 x SPST 2.5 2 8 √ √ √ 63 -67 -92 366 √ DG2612 DG2613 1 x SPDT 1 2.4 36 √ √ √ 30 -46 -42 80 DG2720 DPDT 6 2.6 4 √ √ 30 -80 -85 620 SELECTOR GUIDE 19/26 √ √ Mini QFN √ √ MSOP √ 20 QFN/DFN BW (MHz) 17 7 SOIC Cross- talk @ 1 MHz (dB) 1 1 SOT-23 Off Isolation @ 1 MHz (dB) 3 1 x SPDT TSSOP tON Max. (ns) 1 x SPDT DG2012 12 V 4.3 V / 5 V DG2001 ±5V Config ± 2.5 V Part Number √ 2.8 3.2 Package Options 3V Dynamic Performance 1.8 V Characterization Voltages 1.6 COFF (pF) typ Basic Parameters 1.2 VD - Analog Voltage (V) SC-70/SC89 0.4 12 11 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 0.0 MICRO FOOT 17 0.0 Charge Injection (pC) typ VD -12 12 11 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 3.2 0.0 rON (Ω) typ 0.8 0.4 D(off) Channel Off Leakage (A) Channel Off Leakage (A) -12 -12 Qinj - Charge Injection (pC) -12 DG723 Charge Injection vs Source Voltage Qinj - Charge Injection (pC) This family is designed for operation voltage from 5.5 V down to 1.6 V. The devices are optimized for low 2.0and flat x 10 2.0 x 10 resistances. Devices I at V+I 3.3 V at V+ 3.3 V 1.5 x 10 come in a variety 1.5ofx 10compact packages including 1.0 x 10 1.0 x 10 TSSOP, MSOP, TDFN, and mQFN to addressDG723 theDG723 5.0 x 10 5.0 x 10 requirements of space-constrained applications. DG723 DG723 - 1.0 x 10 - 1.0 x 10 This family of devices includes specialized - 5.0 x 10 - 5.0 x 10 - 1.0 x 10 - 1.0 x 10 devices for high-bandwidth USB applications, - 1.5 x 10 - 1.5 x 10 audio applications requiring negative voltage - 2.0 x 10 - 2.0 x 10 swings, and fault-protected switches designed to - 2.5 x 10 - 2.5 x 10 3.2 1.2 0.8 1.6 1.2 2.0 1.6 2.4 2.0 2.8 2.4 3.2 2.8 0.0 0.4 0.0 0.8 0.4 1.2 0.8 1.6 1.2 2.0 1.6 2.4 2.0 2.8 2.4 3.2 2.8 offer over current or power up/down protection. - Analog V -Voltage Analog (V) Voltage (V) V - Analog V -Voltage Analog (V) Voltage (V) √ √ √ √ √ √ √ √ √ √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 0.5 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Low-Voltage Devices (cont.) 0.5 2.5 DG2730 DPDT 7 0.5 1.3 DG2735 DG2736 2 x SPDT 0.4 55 145 DG2737 DG2738 DG2739 2 x SPST 6 10.4 DG2741 DG2742 DG2743 2 x SPST 0.8 DG2714 1 x SPDT DG2715 DG2716 1 x SPST DG2717 1 x SPDT √ 30 -30 @ 240 MHz -45 @ 240 MHz 700 √ √ √ 30 -30 @ 240 MHz -45 @ 240 Mhz 900 √ √ √ √ 90 -60 -60 180 √ 4.4 √ √ √ 60 -79 -109 720 √ 6 81 √ √ √ 60 -56 -89 230 0.85 9 30 √ √ √ 54 -64 -64 110 √ 0.4 9 72 √ √ √ 29 -57 -60 -- √ 0.45 28 76 √ √ √ 48 -54 -57 110 √ -95 @ 100 KHz √ Mini QFN √ √ MSOP √ SOIC √ 900 SOT-23 620 -45 @ 240 MHz TSSOP -85 -30 @ 240 MHz 12 V -80 30 ±5V 30 √ ± 2.5 V √ √ (pC) typ √ √ DG2725 2 x SPDT 0.7 85 24 95 -85 @ 100 KHz 62 √ DG2706 2 x DPDT 3 4 16 √ 55 -70 -90 190 √ DG2707 2 x 4:1 MUX 3 4 16 √ 56 -70 -90 191 √ DG2747 DG2748 DG2749 2 x SPST 0.4 10 55 √ √ √ 35 -52 -90 93 √ DG2750 2 x SPDT 1.1 25 25 √ √ √ 65 -55 @ 300 KHz -61 @ 300 KHz 34 DG2753 3 x SPDT 0.7 25 35 √ √ √ 60 -90 -90 100 DG2788 DG2789 2 x DPDT 0.4 87 81 √ √ √ 75 -49 -96 50 DG2799 2 x DPDT 0.3 160 108 √ √ √ 60 DG3157 1 x SPDT 6 7 6.5 √ √ √ DG3157A 1 x SPDT 6 7 7 √ √ √ DG2522 SPTT, 3:1 MUX 0.8 27 17 √ DG2520 DG2521 1 x SPDT 0.4 224 50 DG4051A 8:1 MUX 60 2 DG4052A Dual 4:1 MUX 60 2 DG4053A Triple 2:1 MUX 60 DG408L 8:1 MUX DG409L Dual 4:1 MUX DG411L DG604 √ √ √ √ √ √ √ -50 -50 70 -58 @ 10 MHz -59 @ 10 MHz 250 52 57 64 300 √ √ 85 -59 -64 105 √ √ √ 40 -51 -57 224 2 √ √ √ √ 175 -90 -95 330 √ √ √ 2 √ √ √ √ 50 -90 -95 450 √ √ √ 2 2 √ √ √ √ 175 -90 -95 730 √ √ √ 17 1 7 √ √ √ √ 55 -70 -82 280 √ √ 17 1 7 √ √ √ √ 55 -70 -82 280 √ √ 4 x SPST 20 5 5 √ √ √ √ 60 -71 -95 280 √ √ 4:1 MUX 85 1 5 √ √ √ √ 80 -75 -70 280 √ √ - 90 @ 10 MHz 720 √ √ -90 610 √ √ DG611A DG612A DG613A 4 x SPST 85 0.5 5 √ √ √ √ 75 - 62 @ 10 MHz DG636 2 x SPDT 85 1.2 5 √ √ √ √ 130 -90 SELECTOR GUIDE 20/26 MICRO FOOT 7 SC-70/SC89 2 x SPDT QFN/DFN DG2723 BW (MHz) √ 1.3 Cross- talk 4 0.5 @ 1 MHz (dB) 0.5 7 Off Isolation 7 DPDT @ 1 MHz (dB) 2 x SPDT DG2722 tON Max. (ns) 1.8 V DG2721 Package Options 4.3V / 5 V Config Dynamic Performance 3V Part Number COFF (pF) typ Characterization Voltages rON (Ω) typ Charge Injection Basic Parameters √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Low-Voltage Devices (cont.) 38 4 √ √ DG9053 Triple 2:1 MUX 30 38 4 √ DG9409 Dual 4:1 MUX 4 23 23 DG9408 8:1 MUX 4 29 21 DG9411 1 x SPDT 7 5 7 DG9421 DG9422 1 x SPST 2 320 DG9424 DG9425 DG9426 4 x SPST 1.8 DG9432 DG9433 DG9434 2 x SPST 19 SELECTOR GUIDE -92 319 √ 55 -78 -83 -- √ √ √ 55 -78 -83 -- √ √ √ √ 55 -78 -83 -- √ √ √ √ √ 75 -80 @ 100 KHz -85 @ 100 KHz -- √ √ √ √ √ 75 -80 @ 100 KHz -85 @ 100 KHz -- √ √ √ 40 -75 -68 200 31 √ √ √ √ 50 -60 -- 50 38 49 √ √ √ √ 65 -56 -77 150 0.36 7.5 √ √ √ √ 40 -75 -96 200 √ 21/26 SC-70/SC89 30 √ -67 MICRO FOOT DG9052 √ 55 Mini QFN √ QFN/DFN √ MSOP √ SOIC 4 SOT-23 38 TSSOP 30 Dual 4:1 MUX BW (MHz) 8:1 MUX Cross- talk DG9051 Package Options @ 1 MHz (dB) √ Off Isolation √ @ 1 MHz (dB) 8 tON Max. (ns) 2 Dynamic Performance 12 V 2.5 ±5V 4.3V / 5 V 2 x SPST ± 2.5 V DG721 DG722 DG723 1.8 V Config (pC) typ Part Number 3V COFF (pF) typ Characterization Voltages rON (Ω) typ Charge Injection Basic Parameters √ √ √ √ √ VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers USB Signal Switches The DG2722 and DG2730 are dual SPDT switches that support USB 2.0 high-speed data line switching. Both devices offer greater than 900 MHz 3 dB bandwidth, 1.3 pF off capacitance, and greater than 8 kV ESD/HBM. USB 2.0 Analog DPDT Switch for Two-Port Switching • • • • • • • • > 900 MHz, 3 dB bandwidth with 5 pF load Fast switching TON = 30 ns, TOFF = 25 ns @ 2.7 V Low bit-to-bit skew: 40 ps (typ.) Low on-resistance, 7.0 Ω (typ.) Low capacitance, 1.3 pF (typ.) Low voltage logic-compatible VINH = < 1.3 8 kV ESD protection (HBM) miniQFN-10 (1.4 mm x 1.8 mm x 0.55 mm) miniQFN10, 1.4 mm x 1.8 mm 0 - 10 Loss Loss, OIRR, X TALK (dB) - 20 - 30 - 40 - 50 OIRR - 60 - 70 XTalk - 80 - 90 - 100 DG2722/DG2730, USB2.0 high-speed eye diagram test, with V+ = 3.3 V - 120 100 K Basic Parameters Part Number Config rON (Ω) typ COFF (pF) typ V+ = 5.0 V V- = - 5.0 V R L = 50 Ω - 110 1M 10 M Frequency (Hz) 100 M 1G Dynamic Performance ≤3V 4.3 V / 5V tON Ma√. (ns) Off Isolation @ 1 MHz (dB) Cross-talk @ 1 MHz (dB) BW (MHz) QFN/ DFN Mini QFN DG2720 DPDT 6 2.6 √ √ 30 -80 -85 620 √ DG2722 DPDT 7 2.2 √ √ 30 -30 @240 MHz -45 @240 MHz 900 √ DG2723 2 x SPDT 7 2.5 √ √ 30 -30 @240 MHz -45 @240 MHz 700 √ DG2730 DPDT 7 2.2 √ √ 30 -30 @240 MHz -45 @240 Mhz 900 √ SELECTOR GUIDE 22/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Negative Swing Audio Switch Devices DG2750 Diagram The following devices are designed to switch audio signals with or without DC bias. Without a DC bias, the signal can swing negative. The devices in this family can handle such negative swing signals. Dynamic Performance Basic Parameters Part Number Config Characterization on Voltages (V) Charge Injection (pC) typ rON (Ω) typ tON Max. (ns) Off Isolation @ 1 MHz (dB) Cross- talk @ 1 MHz (dB) BW (MHz) Package Option DG2727/8/9 Dual SPST 0.65 1.2 2.7 67 -58 -64 250MHz DG2612/3 SPDT 1 2.4 3 60 -61 -67 50MHz mQFN8 SC89 DG2750 Dual SPDT 0.6 4 2.7 1700 -55 -61 34MHz mQFN10 Note: DG2750, 0.6Ω dual SPDT in mQFN10 Fault Protected Switch Special circuits are integrated to protect the devices from various fault conditions. Power down protection blocks the current flow from signal ports to the power pin when the power supply is down. This is important for the devices used in interfaces where the connected circuits use different power sources that may not be correctly sequenced. The DG2522 is a 3:1 MUX device that guarantees low leakage current under the fault conditions when signals swing above the power supply level. The switch isolates the input and output blocks in the off state. The DG2520 and DG2521 feature over-current protection that switches off the load under excessive load events. Dynamic Performance Config DG2520 SPDT 0.4 DG2521 SPDT 0.4 DG2522 SPTT, 3:1 mux 0.8 DG2720 2 x SPDT 6 √ √ 30 DG2722 2 x SPDT 7 √ √ 30 DG2723 2 x SPDT 7 √ √ 30 DG2730 2 x SPDT 7 √ √ 30 DG4157 SPDT 0.95 √ 60 SELECTOR GUIDE rON (Ω) typ Characterization Voltages (V) Part Number 1.8 √ Feature and Protection 5V tON Max. (ns) Off Isolation @ 1 MHz (dB) Cross- talk @ 1 MHz (dB) BW (MHz) √ √ 40 -51 -57 224 Overcurrent, Break before Make √ √ 40 -51 -57 224 Overcurrent, Make before Break √ √ 85 -59 -64 105 Signal over power rail protection -80 -85 620 Power down protection -30 @ 240 MHz -45 @ 240 MHz 900 Power down protection -30 @ 240 MHz -45 @ 240 MHz 700 -30 @ 240 MHz -45 @ 240 Mhz 900 Power down protection -58 -63 117 Power down protection 3V 4.3 √ 23/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog- Part Switches and Multiplexers Analog Switches & Multiplexers Nomenclature Part Nomenclature Device Family (1 to 3 Letters) DG - Analog Switches and Analog Multiplexers Device Number (3 to 5 Digit Numbers) Process Option Operating Temperature Range (1 Letter) A - -55 to 125 °C B - -25 to 85 °C C 0 to 70 °C D - -40 to 85 °C E - -40 to 125 °C /883 - Processing to the current revision of MIL-STD-883, Level B. Compliant Non-JAN -Tx - Tape-and-Reel options, “x” is a number that represents taping orientation; The absence of Tape & Reel option indicates that the devices are shipped in tubes Package (1 Letter) A - Metal Can B - Wafer Level CSP (MicroFOOT, WCSP) J - Dual-In-Line Package – (Plastic DIP) K - Dual-In-Line Package – (Ceramic DIP) L - SC70 (-5ld, -6ld) Package M - CerQuad J-Leaded Chip Carrier N - Quad Flat No-Lead – (QFN, miniQFN) - Dual Flat No-Lead – (DFN, TDFN, uDFN) - Plastic J-Leaded Chip Carrier – (PLCC) P - Dual-In-Line Package – Sidebraze Q - Thin Shrink Small Outline Package (TSSOP, MSOP) R - Dual-In-Line Package – Sidebraze S - SOT23-8ld Package V - Thin Shrink Small Outline Package (TSOP) W - Wide-Body Small Outline Package (SOIC) X - SC89 Package Y - Narrow-Body Small Outline Package (SOIC) Z - Leadless Chip Carrier – (LCC) SELECTOR GUIDE RoHS Status G RoHS “Green” Compliant* *Some devices might be RoHS Complaint Although the part number is missing the G suffix. Please check with the factory Ex There are 3 “E” numbers that represent the different lead-free finishes: - E1 = Tin/Silver/Copper - E3 = 100 % matte Tin - E4 = Nickel/Palladium/Gold The absence of “-Ex” indicates that the devices are not lead-free 24/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers Packages A wide selection of packages to fit your requirements Package Type Package Type Dimensions (mm) WxLxH MICRO FOOT® 3 x 2 1.5 x 1.0 x 0.65 TSSOP-14 5.0 x 6.4 x 1.2 MICRO FOOT® 3 x 3 1.5 x 1.5 x 0.65 TSSOP-16 5.0 x 6.4 x 1.1 MICRO FOOT® 4 x 3 2.0 x 1.5 x 0.65 TSSOP-28 6.4 x 9.7 x 1.0 MICRO FOOT® 4 x 4 2.0 x 2.0 x 0.65 PLCC-20 9.9 x 9.9 x 4.4 miniQFN-6 1.2 x 1.0 x 0.55 miniQFN-8 1.4 x 1.4 x 0.55 PLCC-28 12.4 x 12.4 x 4.4 miniQFN-10 1.8 x 1.4 x 0.55 PLCC-44 17.5 x 17.5 x 4.4 miniQFN-16 2.6 x 1.8 x 0.75 LCC-20 8.9 x 8.9 x 1.8 DFN-10 3.0 x 3.0 x 0.9 QFN-12 3.0 x 3.0 x 0.9 QFN-16 3.0 x 3.0 x 0.9 QFN-16 4.0 x 4.0 x 0.9 TDFN-8 LCC-28 11.4 x 11.4 x 1.8 CERQUAD-44 17.5 x 17.5 x 3.1 FLAT PACK-14 22.9 x 8.9 x 2.3 FLAT PACK-16 23.4 x 10.2 x 2.1 2.0 x 2.0 x 0.55 CERDIP-8 7.9 x 9.8 x 4.6 MSOP-8 3.0 x 4.9 x 1.0 CERDIP-14 7.9 x 19.3 x 4.6 MSOP-10 3.0 x 4.9 x 1.0 CERDIP-16 7.9 x 19.3 x 4.5 SC89-6 1.65 x 1.65 x 0.55 CERDIP-28 36.8 x 15.5 x 5.0 SC70-5/6 2.0 x 2.1x 1.0 PDIP-14 7.9 x 18.3 x 4.4 TSOP-6 2.9 x 3.0 x 1.0 PDIP-16 7.9 x 21.1 x 4.4 SOT23-8 2.9 x 2.8 x 1.3 SOIC-8 (Narrow) 6.0 x 4.9 x 1.6 PDIP20 7.9 x 25.9 x 4.4 SOIC-14 (Narrow) 6.0 x 8.6 x 1.6 PDIP28 15.5 x 37.3 x 3.7 SOIC-16 (Narrow) 6.0 x 9.9 x 1.6 SideBraze DIP-14 7.6 x 18.5 x 3.6 SOIC-18 (Wide) 10.2 x 7.6 x 2.4 SideBraze DIP-16 7.6 x 20.5 x 3.6 SOIC-20 (Wide) 10.3 x 12.8 x 2.5 SideBraze DIP-20 7.6 x 25.5 x 3.6 10.3 x 17.9 x 2.5 SideBraze DIP-28 15.3 x 37.4 x 3.6 SOIC-28 (Wide) SELECTOR GUIDE Dimensions (mm) WxLxH 25/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . PRECISION ANALOG ICs Analog Switches and Multiplexers WORLDWIDE SALES CONTACTS THE AMERICAS EUROPE UNITED STATES GERMANY VISHAY AMERICAS ONE GREENWICH PLACE SHELTON, CT 06484 UNITED STATES PH: +1-402-563-6866 FAX: +1-402-563-6296 VISHAY ELECTRONIC GMBH DR.-FELIX-ZANDMAN-PLATZ 1 95100 SELB GERMANY PH: +49-9287-71-0 FAX: +49-9287-70435 ASIA FRANCE SINGAPORE VISHAY INTERTECHNOLOGY ASIA PTE LTD. 37A TAMPINES STREET 92 #07-00 SINGAPORE 528886 PH: +65-6788-6668 FAX: +65-6788-0988 VISHAY S.A. 199, BD DE LA MADELEINE 06003 NICE, CEDEX 1 FRANCE PH: +33-4-9337-2727 FAX: +33-4-9337-2726 P.R. CHINA UNITED KINGDOM VISHAY CHINA CO., LTD. 15D, SUN TONG INFOPORT PLAZA 55 HUAI HAI WEST ROAD SHANGHAI 200030 P.R. CHINA PH: +86-21-5258 5000 FAX: +86-21-5258 7979 VISHAY LTD. SUITE 6C, TOWER HOUSE ST. CATHERINE’S COURT SUNDERLAND ENTERPRISE PARK SUNDERLAND SR5 3XJ UNITED KINGDOM PH: +44-191-516-8584 FAX: +44-191-549-9556 JAPAN VISHAY JAPAN CO., LTD. SHIBUYA PRESTIGE BLDG. 4F 3-12-22, SHIBUYA SHIBUYA-KU TOKYO 150-0002 JAPAN PH: +81-3-5466-7150 FAX: +81-3-5466-7160 SELECTOR GUIDE 26/26 VMN-SG2134-1404 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000