Manual - Northern Tool + Equipment

advertisement
DAWN TO DUSK SENSOR
OWNER’S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS
before operating. Failure to follow the safety rules and other basic safety precautions
may result in serious personal injury.
Item#
Color
38724
Black
39583
White
39584
Silver
39585
Forest Green
39586
Copper
1
Thank you very much for choosing this product! For future reference, please complete the owner’s
record below:
Model: _______________
Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This sensor is designed for certain applications only. The distributor cannot be responsible for issues
arising from modification. We strongly recommend this sensor not be modified and/or used for any
application other than that for which it was designed. If you have any questions relative to a particular
application, DO NOT use the sensor until you have first contacted the distributor to determine if it can
or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
This dawn to dusk sensor is easy to install. It is perfect for northern industrial tools barn lights.
Automatically activates lights; turn them on as darkness falls and turning them off at first light.
Weatherproof design for exterior use.
TECHNICAL SPECIFICATIONS
Item
Description
Material
Aluminum
Finish
Powder-coat
Electrical Rating
120V AC, 60Hz
Wattage
60 Watts MAX.
Product Size
5”W x 6.4”L x 1.8”D
GENERAL SAFETY RULES

WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.

CAUTION: Do not allow persons to operate or assemble this sensor until they have read this
manual and have developed a thorough understanding of how the sensor works.

WARNING: The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions or situations that could occur. It must be understood by the
operator that common sense and caution are factors that cannot be built into this product, but must be
supplied by the operator.
2
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY CONSIDERATIONS
•
Proper installation of this product requires the installer to have a good understanding of circuitry.
•
Please operate your down to dusk sensor according to Operation Method and retain the proper
operation procedures.
•
Before attempting to install down to dusk sensor, ensure power to outlet box is off for your own
safety.
•
WARNING: Connect green fixture wire to grounding screw in junction box.
•
WARNING: Do not touch the steel parts when it is working.
•
Do not use any harsh abrasives, detergents or anything containing ammonia to clean your down
to dusk sensor.
•
FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD
RESULT IN DAMAGE TO THE PRODUCT OR SERIOUS INJURY TO YOU!
SENSOR USE AND CARE
•
Do not modify the sensor in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the sensor
was designed.
•
Check damaged or worn out parts before using the sensor. Broken parts will affect the sensor’s
operation. Replace or repair damaged or worn parts immediately.
•
Electrical Rating: 120V AC, 60Hz; 60 Watts MAX.
ASSEMBLY
Attach to wall mount lights:
1.
2.
3.
4.
Disconnect power at main electrical box before installing fixture.
Place the sensor to the back plate of light. Attach the white wire of sensor to the white wire of
light, red wire of sensor to black wire of light and live wire in junction box, black wire of sensor to
neutral wire in junction box, using wire nuts (9) provided.
Connect 2 green wires (one of the light and one of the sensor) to grounding screw in the junction
box.
Attach the back plate with sensor to junction box using #8-32 mounting screws(7).
Attach to ceiling mount lights:
1.
Disconnect power at main electrical box before installing fixture.
3
2.
3.
4.
5.
6.
7.
Attach the sensor to the back plate of light using 3 pieces M4x22 screws(6). Attach the white
wire of sensor to the white wire of light.
Thread the M4x40 mounting screws (8) into the provided holes of the mounting bracket on the
light.
Pull the power supply wires out from the junction box ,and mount the mounting bracket to the
junction box, using #8-32 Mounting Screws(7).
Attach red wire of sensor to black wire of light and live wire in junction box, black wire of sensor to
neutral wire in junction box, using wire nuts (9) provided.
Connect 3 green wires (two of the light and one of the sensor) to grounding screw in the junction
box.
Place the back plate of light over the junction box and onto the M4x40 mounting screws
(8).Adjust the mounting screws until they protrude out from the back plate 5/32”.Then attach the
cap nut provided in lights.
MAINTENANCE
•
Maintain your dawn to dusk sensor. It is recommended that the general condition of dawn to dusk
be examined before it is used. Keep your sensor in good repair by adopting a program of
consistent repair and maintenance. Have necessary repairs made by qualified service personnel.
4
PARTS DIAGRAM
PARTS LIST
Part No.
Description
Quantity
1
Housing
1
2
Photocell switch
1
3
Rubber Washer
2
4
Nut
2
5
Gasket
1
6
M4x22 Screw (not shown)
3
7
#8-32 Mounting Screw (not shown)
2
8
M4x40 Mounting Screw (not shown)
2
9
Wire Nut (not shown)
3
For technical questions please call 1-800-222-5381.
5
WARRANTY
1-year limited warranty
Distributed by:
Northern Tool + Equipment Co., Inc.
Burnsville, Minnesota 55306
NorthernTool.com
Made in China
6
APPENDIX: A SKETCH MAP FOR LIGHT MOUNTING
For ceiling mount light
Ground
Junction Box by others
Black wire( neutral wire)
White wire(live wire)
Black wire
Green wire on back plate
Black wire
Green wire of light
Red wire
Green wire of sensor
White wire
White wire
Dawn to dusk sensor
Black plate of light
7
APPENDIX: A SKETCH MAP FOR LIGHT MOUNTING
For wall mount light
Dawn to dusk sensor
White wire
Ground
White wire(live wire)
Green wire of sensor
Green wire of light
Junction Box by others
Black wire( neutral wire)
Black wire
Black wire
Red wire
White wire
8
Black plate of light
Download