Introduction
To
North American Electric, Inc.
Presented to:
EIS, Inc.
www.naemotors.com
jj
l
North American Electric, Inc.
 Supplies motors, gear reducers,
controls, and accessories used in
aggregate, agricultural, industrial, oil &
gas, manufacturing, wells, and just
about anywhere electric motors are
used. Single and three phase available.
 We offer high quality products at a less
expensive price than the competition.
 Multiple strategically placed
warehouses to minimize transit times
 Excellent customer service that goes
the extra step to help you find what
you need
 24 hour emergency hot shot service
Company Information
•
Established 1993
•
Owner Managed
•
Incomparable Product Sourcing
•
Experienced, Knowledgeable Staff
•
Offices in U.S. and Asia
•
Headquartered in Hernando, MS
•
Multiple Stocking Locations
•
Authorized Service Centers
•
Check stock and place orders online at
www.naemotors.com/shop
3
Technical Support
• 24/7, On-Line Tech Support @ www.naemotors.com
• Toll Free Technical Support 1-800-884-0404
• PowerPoint Technical Training & Support
• On-Site Technical Training & Support
4
Product Reliability
• Periodic Factory Inspections & Audits
• Products Meet or Exceed Industry Certifications
, ISO 9001,
,
• Products Built To NAE Specifications
• Custom Designs Built To Order
5
Premium Efficient Motors
Applications: General Purpose Use on Fans, Pumps, Blowers, Compressors,
Conveyers, Material Handling and Other Industrial Machinery, Installed in
Damp, Dusty or Dirty Environments.
•
•
•
•
•
•
•
•
•
Premium Efficient; NEMA MG 1 Table 12-12
Inverter Duty (20:1 VT & 10:1 CT)
Class I Div II: Groups ABCD / Temp Code T2B
Class F Insulation System
• VPI Class H Insulation Internal
• Class F Leads For Ease of Wiring
High Grade Silica Steel Core & Rotor
Totally Enclosed Fan Cooled, IP55 Protected
Mechanical “V Seals” on DE for Added Protection
3-year warranty – additional warranty up to 5 years can
be purchased at an additional 5% per year
Insulated Bearings on 400 Frame and Above
6
Premium Efficient Cast Iron
ROUND BODY Motors
1 – 30 HP, 1800 RPM
C-Face / No Feet
7
Premium Efficient Cast Iron
ODP Motors
1 – 300 HP, 3600RPM & 1800 RPM
Perfect for HVAC Applications
Roller & Ball Bearings Available
8
EISA Compliant Motors
Applications: General Purpose, Fans, Pumps, Blowers, Compressors,
Conveyers, Material Handling, Industrial Machinery. Installed in
Damp, Dusty or Dirty Locations
• EISA Compliant; NEMA MG 1 Table 12-11
• Inverter Duty (20:1 VT & 10:1 CT)
• Class I Div II: Groups ABCD / Temp Code T2B
• NEMA Design C High Torque Specifications &
Performance
• Class F Insulated with Class H VPI Epoxy Resin
• Totally Enclosed Fan Cooled, IP55 Protected
• Mechanical “V Seals” for Added Protection
9
Premium Crusher Design Motors
143T-449T Frames
Applications: Primary, Secondary, Tertiary Crusher. Single or Double
Shaft. Jaw Crusher, Roller Crusher, Vertical Shaft Impact Crusher,
Horizontal Shaft Impact Crusher, Gyratory Crusher, Cage Mills, Cone
Crusher, Hammermills, Grizzly Feeders, Crusher Feeder & Rock
Conveyors
• EISA Compliant; NEMA MG 1 Table 12-11
• Inverter Duty (20:1 VT & 10:1 CT)
• Class I Div II: Groups ABCD / Temp Code: T2B
• NEMA Design C High Torque Specifications &
Performance
• Totally Enclosed Fan Cooled, IP55 Protected
• Mechanical “V Seals” for Added Protection
10
Premium Crusher Design Motors
586/7 U,UZ Frames
Applications: Primary, Secondary, Tertiary Crusher. Single or Double Shaft. Jaw
Crusher, Roller Crusher, Vertical Shaft Impact Crusher, Horizontal Shaft Impact
Crusher, Gyratory Crusher, Cage Mills, Cone Crusher, Hammermills, Grizzly Feeders,
Crusher Feeder & Rock Conveyors
• NEMA Design “C” – Extra High Starting & Breakdown Torques
• NEMA PREMIUM EFFICIENT
• Meet or Exceed NEMA MG1 Table 12-12 (350-600 HP)
• Inverter Rated (10:1 VT & 5:1 CT)
• Winding Space Heaters & Winding Thermostats Standard
• Oversized Conduit Box Increases Air Flow
• Terminal Box for ease of wiring as standard
• Totally Enclosed Fan Cooled, IP55 Protected
• Labyrinth Seal on DE and ODE
11
56C Frame Motors
Applications: General Purpose, Fans, Pumps, Blowers, Compressors, Farm
Equipment, Industrial & Commercial Machinery. Installed in Damp, Dusty or Dirty
Locations. Indoors & Outdoors.
Three Phase 56C Frame TEFC
Inverter Rated (10:1 VT & 5:1 CT)
Internal Oil Seal On Drive End
Dual Drilled Removable Feet
Totally Enclosed Fan Cooled, IP55 Protected
•
•
•
•
Single Phase 56C Frame TEFC
•
•
•
•
High Starting Torque
Internal Oil Seal On Drive End
Dual Drilled Removable Feet
Totally Enclosed Fan Cooled, IP55 Protected
12
Vertical Hollow Shaft Motors
Applications: Designed primarily for deep well turbine pump applications.
Equipped with a non-reverse ratchet, preventing reverse rotation at shut
down. Built to NEMA Standards with special bearing arrangements to carry
heavy thrust loads.
• High Torque / High Thrust Design
• Non - Reverse Ball Bearing Ratchet
• Standard Efficiency – Inverter Rated: 10:1 VT
• High Efficiency – Inverter Duty 20:1 VT
• Oversized Cast Iron Conduit Box
• Mounting Base Designed for Easy Installation
• 10-500 Horsepower, 1800 RPM
• Custom Design Modifications Available
13
HIGH EFFICIENCY
Vertical Hollow Shaft Motors
14
Special Purpose Motors
Three Phase Open
Drip Proof Motor
15
Single Phase Farm-Duty Motors
Applications: Pumps, Fans Conveyors, Poultry Equipment, Compressors and other
farm duty machinery requiring a high starting torque
• High Starting Torque
• Heavy 9 gauge rolled steel construction
• TEFC
• Double Punched Foot Design
• C-Flange Kits available
• NEMA Design B
• Class F Insulation with Class H VPI Epoxy
16
Single Phase Compressor
Duty Motors ODP
Applications: Compressors
• High Starting Torque
• Heavy 9 gauge rolled steel construction
• IP 23 ODP Protection
• Oversized bearings on both DE & ODE
• Double Punched Foot Design
• C-Flange Kits Available
• High Efficient NEMA Design B
• Class F Insulation with Class H VPI Epoxy
17
Three-Phase Stainless Steel
Footed and Footless
Applications: Food Processing, Pharmaceutical, Chemical Processing, Poultry
Processing, Meat Processing, Dairy Processing, Bakeries, Bottling, Extremely
Corrosive Environments, Any Wash-Down Duty Environment
• Stocked from 1/3HP – 20HP
• C-Flanged – With or Without Feet
• Inverter Duty 20:1 Variable Torque 10:1 Constant
• All Stainless Steel Construction
• IP66 Protection (protected against water jets)
• TEFC and Double Punched on Footed Models
• Class F Insulation with Class H VPI Epoxy Resin
• Double Sealed Bearings
• High Efficient NEMA Design B
18
Special Purpose Motors
Explosion Proof Motor
Oil Well Pump Motor
TEFC
Oil Well Pump Motor
ODP
19
Explosion Proof
T-Frame & TC-Frame Motors
Applications: Explosion Proof Motors are designed to be used in
hazardous locations as defined by Class and Group.
NAE EXP Motors are:
Class I, Division I, Groups C & D
Class II, Division I, Groups E, F & G
• Dual Rated Nameplate for 60HZ @ 1.15SF & 50HZ @ 1.0SF
• Operating Temp Code: T3C
• Class I Div I for hazardous locations
• Heavy Duty FC 200 Cast Iron Construction
• Shaft Made of 1045 Carbon Steel
• Heavy Gauge Steel Fan Cover
• Oversized Conduit Box
• TEXP and Double Punch Feet
• PTC Thermistor as Standard
• Class F Insulation with Class H VPI Epoxy Resin
• Greasable Bearings on DE & ODE from 254T – 449T
20
Defining Hazardous Locations
Defining Hazardous Locations cont’d
Oil Well Pump Motors
TEFC & ODP
Applications: Oil Wells, Mud Pump, Sludge Pumps
• Inverter Rated
• Greasable Bearings 254T Frame and Larger
• Oversized Bearings on DE & ODE
• 1045 Carbon Steel Shaft
• Class F Insulation with Class H VPI Epoxy Resin
• Double Punch Foot Design
• Oversized Conduit Box
• Heavy Gauge Steel Fan Cover
• Thermistors in the Windings as Standard
• Certified Class I, Div II; Groups A, B, C & D; Temp Code T2B
• Protection Screens on the ODP Motors for rodent protection
23
Closed Coupled Pump Motors
JM
JP
24
Closed Coupled Pump Motors
Applications: specifically designed for use on industrial and commercial
pumping units
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Inverter Rated
Meets or exceeds EPACT ‘92 and NRCan efficiency requirements
Totally Enclosed Fan Cooled (TEFC Enclosure)
Suitable for Wye-Delta start on 213JM/JP frame and above
Dual voltage ratings suitable for part wind start on lower voltage
1.15 Service Factor @ 60Hz; 1.0 Service Factor @ 50Hz
Vacuum Pressure Impregnation for all windings
Sealed bearings thru 215JM and 215JP frames
Regreasable open bearings 254JM and 254JP frame and above
Class F insulation system, class B rise at full load
40° C ambient continuous duty
Corrosion resistant paint
Stainless Steel nameplate and zinc plated hardware
F1 / F2 Reversible
Feet are dual drilled on most frames for mounting flexibility
25
Shaft Mount Reducers
Sizes 2 - 10
Torque Arm,
Included with
purchase of Shaft
Mount Reducer
Backstops &
Bushing Kits
Motor
Mounts
Belt Guard
REPAIR KITS NOW AVAILABLE
26
Shaft Mount Reducers
Applications: Screw Conveyors, Belt Conveyors
• Drilled for CEMA Screw Applications
• All Housings are Forged and Machined on New State of the Art
Computerized Equipment
• All Gearing is Cut and Grounded on the same New State of the Art
Computerized Equipment
• All new Shaft Mounts come with a Torque Arm
• Additional Torque Arms available to purchase
• Accessories, Screw Conveyor Adapters and Flanges available
• Repair Kits Available for customer’s convenience
27
Cross Reference
Related Products
Rotary Phase Converter Motor
29
Full Voltage Starters (Across The Line Starters)
Part Wind / Wye Delta Starters
Reduced Voltage Solid State Starter (Soft Starter)
Variable Frequency Drives (VFD)
FOR DETAILED INFORMATION ABOUT NORTH AMERICAN ELECTRIC’S
MOTOR CONTROL PROGRAM PLEASE CONTACT US AT:
800-884-0404 or sales@naemotors.com
Why We Rock:
• No-Fault Warranty Policy for 215T Frame and Down
• We can build Custom Motors to your customer’s spec
• Our Build-to-Suit panel shop has quick turn around
• We carry Un-Wound Motors for Motor Shops to wind per spec
• Our T-Frame motors are a uni-body design for harsh applications
31
Why We Rock:
• We have over $10 Million in inventory in our 15 stocking
locations around the country
• We will open the 3 main warehouse anytime day or night
• After Hours Fee: $150.00
• Additional Warehouses can ship after hours, but please call
customer service for hours and charges
32
Why We Rock:
• We have a 90-day Return Policy
• We understand that mistakes are made and that your
customer may have requests that are outside of our normal
return policy. Please contact customer service for all returns
and we will evaluate your customer’s request.
33
Warehouse Locations and
Shipping Cut Off Times:
• Hernando, MS
• Ground: 3:30PM CT
• Freight: 3:30PM CT
• Houston, TX
• Ground: 3:00PM CT
• Freight: 3:00PM CT
• Reno, NV
• Ground: 2:30PM PT
• Freight: 2:30PM PT
34
EIS, Inc.
Suppported Web Site:
www.naemotors.com/eis/
35