Action Product Agency Approvals
Approval Agencies
CE
CSA
CUL
FM
NEC
NEMA
UL
Conformite Europeenne, European Union
Canadian Standards Association, Canada
Canadian Safety Approval from UL
Factory Mutual Research Corporation, USA
National Electronics Council, USA
National Electrical Manufacturer's Association, USA
Underwriters Laboratories, USA
CE Mark (CE)
CE mark approval for the Ultra SlimPak, the Ultra SlimPak II,
VisiPak and ActionI/Q are defined by European Norms
(EN#50081-1 and EN# 50082-2). Consult Action Technical
Support for more details.
CSA Certification
The CSA certification of the Action Pak series, Ultra SlimPak,
Ultra SlimPak II and ActionI/Q complies with CSA standard
C22.2 No. 0-M1982: General Requirements/Canadian Electrical
Code, Part II, and No. 0-M1983: Process Control Equipment/
Industrial Products, Certificate No. LR 42272. The only Action
Paks to qualify are those with an 8 or 11-pin base.
Action Pak®
AP1000 Series:
AP4000 Series:
AP4400 Series:
AP4500 Series:
AP6000 Series:
AP7000 Series:
AP7500 Series:
AP9000 Series:
All models except those with 20 pin base.
All models.
AP4440 only.
AP4570 and AP4580 only.
AP6380 only.
AP7380 only.
AP7500 and AP7501 only.
AP9046 only.
Ultra SlimPak®
G100 Series:
All models.
G400 Series:
All models.
Ultra SlimPak® II
WV100 Series: All models.
WV400 Series: All models.
ActionI/Q™
Q400 Series:
Q500 Series:
All models.
All models.
TransPak™
The CSA certification of the T700 series allows intrinsically safe
installations in Class I, Division 1, Groups A-D hazardous locations.
All installations require approved intrinsic barriers per
manufacturer's drawing 790-0025-00. Certificate No. LR 42272.
The CSA certification of the T797-1 and T798-1 allows intrinsically
safe installations in Class I, Division 1, Groups A-D; Class II, Division
1, Groups E, F and G; and Class III, Division 1, when installed in
accordance with drawing 732-0220-00 or 732-0221-00.
T700 Series:
T797 & T798:
T703-2000, T761, and T773.
All models.
VisiPak™
The CSA certification of the V508/V509 complies with CSA
Standard C22.2 No. 0-M1982: General Requirements/Canadian
Electrical Code, Part II, and No. 0-M1983: Process Control
Equipment/Industrial Products. Certificate No. LR 42272. V508
and V509 only.
The CSA certification of the V560 series allows intrinsically safe
installations in Class I, Division 1, Groups A-D hazardous locations.
All installations require approved intrinsic barriers per manufacturer's
drawing 790-0027-00. Certificate No. LR 42272-10. V560, V560C
and V565. See enclosure ratings for V560EP and V561.
Factory Mutual (FM)
TransPak™
The FM approval of the T600/T700 series allows intrinsically safe
installations in Class I, Division 1, Groups A-D hazardous locations. All installations require approved intrinsic barriers per
manufacturer's drawing 790-0024-00.
The T700 series (except the T700-0001 and T703-2000) is also
permitted in non-incendive Class I, Division 2, Groups A-D; and
Class II and III, Division 2, Group G areas. Division 2 locations do
not require barriers. Certificate No. J.I.2M2A5.AX(3611).
The T703-2000 is approved Intrinsically Safe, Entity, Class I, II, III,
Division 1, Groups A-G hazardous locations per drawing 7900028-00; and non-incendive Class 1, Division 2, Groups A-D
hazardous indoor locations per manufacturer's drawing 7900028-00. Certificate No. J.I.1V4A5.AX.
T700 Series:
T797 & T798:
All models except T700, T761, and T773.
All models.
VisiPak™
The FM approval of the V560/V565 series permits intrinsically
safe installations in Class I, Division 1, Groups A-D hazardous
locations and non-incendive Class I, II, III, Division 2, Groups AD and G areas. All Division 1 installations require approved
intrinsic barriers per manufacturer's drawing 790-0024-00. Division 2 installations do not require a barrier. Certificate No.
J.I.2M2A5.AX (3611). V565 is Entity Approved, drawing 7900029-00, Certificate No. J.I.3V1A5.AX. V560, V560C, V565 and
V565C only.
Underwriters Laboratories (UL and CUL)
UL recognition for Action Pak, Ultra SlimPak, Ultra SlimPak II,
ActionI/Q and VisiPak complies with UL standard 508 for Industrial Equipment. Canadian safety requirements C22.2 are met
with CUL (as indicated).
Action Pak®
AP1080/1090-2000
AP1280/1290-2000
AP1680/1690-2000
AP4351
AP4380-2000
AP4382, AP4390, AP4391, AP4392, AP6380, AP7380
Ultra SlimPak®
G100 Series:
All models.
G400 Series:
All models.
Ultra SlimPak® II
WV100 Series: All models.
WV400 Series: All models.
ActionI/Q™
Q400 Series:
Q500 Series:
All models.
All models.
VisiPak™
V108, V116, V132, V408: UL and CUL listed.
V430 Series:
All UL and CUL listed except V436.
V508-5000 Series only.
V509-5000 Series only.
M Series Sockets: All except M020.
Explosion Proof Ratings for Enclosures
Action Pak®
C008:
C011:
NEC, NEMA 4, CSA.
NEC, NEMA 4, CSA.
TransPak®
T690/691EP:
NEC, NEMA 4.
T79E (except T79E-1): NEMA 4X and 7, CSA, FM
T800:
NEC, NEMA 4, CSA
T805:
NEC, NEMA 4, CSA, FM
VisiPak™
V560EP:
V561:
V960:
NEC, NEMA 4, CSA, FM
NEC, NEMA 4, CSA, FM
NEC, NEMA 4, CSA, FM
FieldPak™
Housing and transmitter are approved separately. Refer to the
T805 housing and the T700 TransPak series.
NOTES:
The NEC and CSA approvals for the C008, C011, T690EP, T691EP
and T800 enclosures permit installations in Class I, Group D (also
Group C with approved 3/4" or smaller reducer); Class I, Groups
E and G; Class III hazardous locations per Articles 500 through 517
(1987 edition). The above enclosures are equipped with 3/4"
NEC approved reducers for Group C rating and a gasket for NEMA
4 protection against liquids. The use of the supplied gasket does
not void the hazardous rating.
The NEC, CSA and FM approvals for the T805 and F700 enclosures
permit installations in Class I, Groups B, C, D; and Class II, Groups
E, F, G hazardous locations. All enclosures are equipped with a
gasket for NEMA 4 protection aganst washdowns. The use of the
supplied gasket does not void the hazardous rating.
The CSA and FM approvals for the T79E explosion proof housings,
available with and without windows, permit installations in Class
I, Divisions 1 and 2, Groups B, C and D; Class II, Divisions 1 and 2,
Groups E, F and G; and Class III, and are rated for NEMA 4X and
NEMA 7 environments.
The NEC, CSA and FM approvals for the V560EP and V960
enclosures permit installations in Class I, Groups C and D; and
Class II, Groups E, F and G hazardous locations. Both enclosures
are NEMA 4 rated.
The NEC, CSA and FM approvals for the V561 enclosure permits
installations in Class I, Groups B, C and D; and Class II, Groups E, F
and G hazardous locations. The V561 enclosure is NEMA 4 rated.