Omnima MaxPAR Products

advertisement
May 2007 Launching a new product line in the UK and Europe!
Omnima Limited
176 Kennington Road
Oxford
OX1 5PG
www.omnima.co.uk
“MaxPAR”: Maximise coral growth, reduce costs
Omnima has introduced a new range of “MaxPAR” products. The “MaxPAR” range of
products enhances lighting conditions in reef aquariums, reduces running costs and
provides higher PAR output at the same time. It also simplifies installation and
maintenance.
IceCap Iwasaki pendant £137 inc VAT
Buy now: SKU16137
IceCap Pendant, Iwasaki 150W 6500K PAR lamp, Vossloh Schwabe 150W German-made
electronic ballast, 5 years manufacturer's warranty for the ballast, cable, plug and an
optional hanging kit. CE tested at Silverstone. Ideal for all reef aquariums, refugiums and
coral farms. See it in action here: Advanced Aquarist, August 2006.
Custom buit-in kit: Iwasaki lamp, ballast, lampholder £86 inc VAT
Buy now: SKU161411
A superb value kit suitable for installation into custom hoods and comprises of all
components you need to start running a metal halide setup. The kit includes an Iwasaki
150W 6500K lamp, Vossloh Schwabe electronic ballast, 5 years manufacturer's warranty
for the ballast, ceramic lampholder, silicone cable and UK plug – all you need to connect
and run the “MaxPAR” Iwasaki lamp.
“MaxPAR” Iwasaki 150W 6500K PAR metal halide lamp £31 inc VAT
Buy now: SKU16134
A unique compact design incorporates a reflector, UV filter and a superior metal halide
lamp. The lamp produces 3 times more output than standard metal halide lamps, 1100
PAR at 9” compared to the usual 300-400 PAR! Due to its design it produces less heat and
uses less electricity per PAR compared to standard lamps. 70W, 20000K, 50000K and
custom temperature versions of this lamp are available on request.
Three times higher PAR output compared to standard metal halide lamps
Omnima Limited, 176 Kennington Road, Oxford OX1 5PG
Company reg. 06038874, www.omnima.co.uk
1 of 2
Vossloh Schwabe 150W electronic ballast £47 inc VAT
Buy now: SKU16138
This is a top quality, German-made ballast. It's silent, runs completely cool and comes with
a 5 year manufacturer's guarantee. The case is compact at only 22.5x9x4cm, lightweight
and incorporates a cable grip and push-in terminals.
Photosynthetically Active Radiation (PAR) measurement
In order to keep lighting at constant levels optimal for coral growth it is possible to measure
and monitor levels of photosynthetically active radiation (PAR) as well as LUX. Metal
halide lamps alongside fluorescent lamps will loose some intensity over a period of time.
By measuring PAR it is possible to adjust lighting levels accordingly:
•
•
•
Change MH and fluorescent lamps only when it is needed and at the right time
Adjust the distance of the lighting fixture from the aquarium. The distance of the
lighting fixture from the aquarium can be increased when the lamps are new and
later lowered to maintain constant lighting levels
Position corals requiring more intensive light at a correct depth
Apogee quantum meter and sensor £139 inc VAT
Buy now: SKU16142
Apogee LQM-ELEC meter and QSO-ELEC sensor reliably measure PAR levels. The
sensor can be submerged in water and is supplied complete with 2m of cable.
Apogee standalone quantum sensor £75 inc VAT
Buy now: SKU16143
This quantum sensor is waterproof and measures only 33x20mm. The sensor generates
0.2mV per umol/m2/sec. It is supplied with 3m of cable. It can be connected to data
acquisition systems or simply connected to a multimeter capable of measuring mV. The
measured voltage is then converted to the PAR/PPF range simply by multiplying the value
by 5. This is a cost effective solution for your PAR monitoring and measurement.
About Omnima
Omnima Limited is a small company based in Oxford, UK. Omnima aims to offer quality
automation products, extended warranties and permanently low prices. Products and
components are sourced directly from manufacturers in OEM quantities or manufactured
by Omnima itself. By sourcing components in the OEM form with minimum packaging
we're able to reduce shipping costs, provide environment-friendly recyclable packaging
and further reduce prices. These savings are directly passed on to our customers.
Omnima Limited, 176 Kennington Road, Oxford OX1 5PG
Company reg. 06038874, www.omnima.co.uk
2 of 2
Download