DS0029 – Issue 1
08/12
Emergency LED Driver
ELEDD 12
High Technology Emergency
LED Driver
The ELEDD enables mains powered
LED luminaires to be driven in
emergency from a battery.
With over 30 years experience and
a reputation for quality emergency
lighting solutions, the design and
construction of the ELEDD is
assured. Reliability and long service
life are a given and to back that up,
every module carries a three year
guarantee.
User-accessible selection of output
current means that each ELEDD can
be set to one of two output levels,
allowing a more precise match to the
host LED scheme. For the supplier
this means a smaller stock range
and reduced costs.
The ELEDD module is a flexible solution
for a changing market







User Selectable Output
Available as articulated unit or as module only
Remote Box solution available
DALI functionality
Compatible with leading brands of mains drivers
Test Switch function
Easy to convert
Emergency LED Driver
ELEDD 12
Operation (Non-AutoTest® variants only)
Connection of the unswitched supply will start the battery
charging. The battery and mains supply should be left uninterrupted for 24 hours to ensure that the battery is fully
charged and capable of providing 3 hours emergency
duration. The LED indicator will be permanently
illuminated, showing that the battery is being charged. If
the LED indicator is not illuminated, check battery
connections.
REVERSING BATTERY POLARITY WILL CAUSE
PERMANENT DAMAGE TO THE CONTROL GEAR.
DALI, D1 variants only
DALI allows two wire communications between the
luminaire and a central monitoring or control system
designed to meet the requirements of DALI standard
IEC62386.
If module is not connected to a DALI network the product
will default to stand alone AutoTest® mode.
Relevant Standards
IEC 62386
EN 61347-2-7, 2-13
EN 62384
EN 60598-2-22
ICEL 1004
BS 5266-1
IEC 62034
DALI
Lamp Control Gear
LED Control Gear
Luminaires
Conversion to Emergency
Emergency Lighting
Automatic Test Systems
Ordering Codes
Option 1 – Module Only
Module Name
Functionality
ELEDD12
/D1
Type
Battery Code
For use with NiMH only
B904 : 2+2 cell NiMH 4Ah Twin Stick
B914 : 4 cell NiMH 4Ah Side By Side
Product Name:
Type of Lamphead:
Battery:
ELEDD12
Multi LED
4 Cell 4Ah NiMH
Supply Voltage:
Supply Current:
Battery Charge
Current:
LED Current (lout):
LED Rating (Vf):
Ambient Temp:
230Vac +/- 10% 50/60 Hz
45mA Max
Max Case Temp (Tc):
Conductor Size:
Total Circuit Power:
200mA Nominal
350-500mA selectable
6V-12V selectable
0°C to 45°C (Module)
10°C to 35°C (Battery)
70°C
0.2 to 1.5mm2
4.0W
Remote Box Dimensions
Height
57mm
Depth
81mm
Width
199mm
Current Settings
Nominal Forward Voltage Setting
(Please refer to Installation Instruction for current
setting)
Vf
mA
6V
500
6V-12V
350
Indicator
LED indicator ordered separately, red and green bicolour LED for the AT4 AutoTest® versions.
Option 2 – Articulated Assembly (Module & Battery)
Module Name
Functionality
Type
ELEDD12
/D1
/H
Option 3 – Remote Box
Module Name
Functionality
ELEDD12
/D1
Specifications
Dimensions (Module & Battery Housing)
230 x 41.5 x 21 mm
Fixing Centres
Base: 220mm (Max M3)
Side: 200mm (Max M3)
Contact Mackwell for optional side fixing kit
Type
/R
We reserve the right to alter specifications without prior
notice.