CI/SfB
(35)Xy
11/2015
metal
leaflet
Hook-On
b-h 300 system
02
f-h 600 system
09
k-h 400 system
16
r-h 200 system
23
r-h 215 system
30
D-H 700 system
37
Metal
product
CI/SfB
(35)Xy
11/2015
b-h 300 system
Linear grid
:::: 4
B-H 300 SYSTEM
Linear grid
Specification
System Armstrong ceiling system B-H 300,
Hook-On solution with visible grid,
with optional swing-down "Window»
function, suspension height min. 100 mm
Panel Material galvanised steel sheet
panel width up to 400 mm 0.6 mm
panel width from 401 mm 0.7 mm
(aluminium or further materials on request)
Coating RAL 9010 pure white post-coated powder
painted visible surface, other RAL or NCS
colours on request
Execution* rectangular panel square edged long sides
CA / DA (30 - 55 mm) short sides E1 / F1
(30 mm)
Gap solution 3 mm gap, with black gasket one long and
short side
Service integration standard round or rectangular cut-outs
plus customised options on request
Special capabilities
- trapezoidal panel solution
- curved panel solution
- chilled ceiling solution
- can be combined with other Armstrong
products
Acoustic inlay Black non-woven acoustic fleece as
standard. Other options available on request.
Configurable dimensions panel length (A) 600 - 3000 mm
panel width (B) 275 - 1350 mm
Grid system U-profile + C-profile 100 mm
Further suspension methods on request
Perimeter solution Range of standards trims in steel and
aluminium plus custom bulkheads available
* For further information about the edge detail execution of metal tiles,
please see the Metal Edge Detail Execution datasheet
standard perforation patterns
BENEFITS
n C
ombining functionality with stylish
simplicity
n C
reates a linear visual effect
n C
-profiles alignment with partitions to
help fixing/support for partitions.
n R
emarkably versatile
n Various design options for the profile
and panel (linear, radial, crossed)
n Easy access to the ceiling void
APPLICATION AREA
n Used in large office environments
and flexible with partitioning systems...
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Free area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Project: Palazzo Uffici, Milano (IT) :::::::: Architect: Genius Loci Architettura s.r.l
Other perforation patterns available on request.
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
5 ::::
:::: 6
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance in terms of sound absorption, sound attenuation
and sound reduction. These performance values will depend
upon the perforation and the acoustic infill. Please contact us
for more information on the available factory fitted acoustic
options.
Standard colours
Cross-section
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
expansion bolt M6
ceiling void
threaded rod M6
hanger for Bandraster profile
Thermal Conductivity
wall anchor
RAL 9010
Global White
RAL 9006
clamping bracket
U-profile
RAL 9007
Special colours
Other RAL and NCS colours available on request
rectangular panel system B-H 300
~68
98
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
plug-in clip
Humidity Exposure
Up to 95% RH (for short term exposure).
Quality Standard
Armstrong is a certified EN ISO 9001:2008 Quality Assured
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specifications of
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
C-profile
perimeter trim
visible side
max. M/2
Longitudinal-section
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Environmental
expansion bolt M6
Our metal panels have an average of up to 30% recycling
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
threaded rod M6
ceiling void
clamping bracket
U-profile
rectangular panel system B-H 300
Acoustics
Safe & Healthy
%
perimeter trim
ISO 14021
Light
reflectance
(%)
up to
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
Standard Perforation Rg 2516 (2)
up to 30
70
0.75(L)
C
Plain / Unperforated (1)
up to 30
85
0.10(L)
Not Classified
Premium OP19
up to 30
up to 30
visible side
max. M/2
Recycled
content
(%)
Premium B15
~68
98
Bandraster profile
Sustainability
depends on
perforation
depends on
perforation
0.65
1.00
C
A
Humidity
Fire reaction Resistance
(%) up to
Bioguard
Cleanability paint
option
10
A2-s2, d0
95
wipeable
moist cloth (3)
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
0.10
44
19
A1
95
scrubbable
0.60
0.90
41
31
20
15
A2-s1, d0
A2-s2, d0
95
95
Scratch
resistance
M = module size / A = panel length / B = panel width
✔
✔
wipeable
moist cloth
wipeable
moist cloth
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
✔
✔
✔
✔
Item No.
Designation
Item No.
BPM 311067
Designation
BPM 300100
U-profile
BPM 300119
connector for U-profile
BPM 300120
plug-in clip
BPM 300144
wall anchor for C-profile
BPM 300140
wall anchor
BPM 311205
partition holder for C-profile
BPM 300121
clamping bracket
BPM 311303
hexagonal bolt M6 x 16 mm
BPM 311111
expansion bolt M6 x 30 mm
BPM 311103
hexagonal nut M6
BPM 311099
threaded rod M6 x 1‘000 mm
BPM 311305
washer M6 18 x 1.6 mm
BPM 215500
C-profile 100 mm
BPM 300118G
connector for C-profile
hanger for C-profile
7 ::::
Detail A B-H 300 panel
hexagonal bolt M6
hexagonal nut M6
washer M6
Detail B grid system
For further information about the edge detail execution of metal
tiles, please see the Metal Edge Detail Execution datasheet
Fall 1
Fall A
wall anchor for
C-profile
expansion bolt M6
threaded rod M6
clamping bracket
plug-in clip
wall anchor
Fall A
Fall 1
hanger for C-rofile
connector for U-profile
connector for
C-profile
U-profile
wall anchor for C-profile
used as cross-connector
partition holder for C-profile
C-profile
Project: Palazzo Uffici, Milano (IT) :::::::: Architect: Genius Loci Architettura s.r.l
Detail C suspension methods
optional B-H 300 Easy panel
with hinge-down function
optional B-H 300 Swing panel
with swing-down function
clamping bracket
with threaded rod
U-profile hanger
with threaded rod
combi Nonius hanger
with Nonius to part
combi Nonius hanger
with eye wire
Metal
product
CI/SfB
(35)Xy
11/2015
f-h 600 system
Corridor ceiling
:::: 11
F-H 600 System
Corridor ceilings
Specification
System F-H 600 System
Armstrong ceiling system F-H 600,
Hook-On solution with concealed grid,
installation height min. 170 mm for wall
bracket at perimeter with 5 - 65 mm
shadow gap between wall and panel
F-H 600 Swing Function
Armstrong ceiling system F-H 600 Swingdown, Hook-On solution with visible grid,
installation height min. 155 mm for wall
bracket at perimeter with 0 - 72 mm
shadow gap between wall and profile with integrated swing-down function
Panel material Galvinised steel sheet
panel width up to 400 mm 0.6 mm
panel width from 401 mm 0.7 mm
(aluminium or other materials on request)
Coating RAL 9010 pure white post-coated powder
painted visible surface, other RAL or NCS
colours on request
Execution* F-H 600 System
Rectangular panel square edged
Long sides CA / DA (30 - 55 mm)
Short sides E4 / F4A (30 mm)
with standard notching
F-H 600 Swing Function
Rectangular panel square edged
Long sides CA / DA (45 - 55 mm)
Short sides E2 / F2 (40 mm)
with standard notching
Gap solution F-H 600 System
0 mm gap on long side, without gasket
Variable shadowgap on short side to cover
wall tolerances
F-H 600 Swing Function
3 mm gap, with black gasket on one long
and two short sides
Configurable dimensions
F-H 600 System
Panel length 600 - 3000 mm
Panel width 275 - 1350 mm
F-H 600 Swing Function
Panel length 600 - 3000 mm
Panel width 247 - 750 mm
Grid system F-H 600 System
Wall bracket attached to the wall
in combination with J-bar, optional
perimeter trim to cover the gap
F-H 600 Swing Function
Wall bracket attached to the wall
in combination with G-profile
Service integration Standard round or rectangular cut-outs
according to customer needs
*F
or further information about the edge detail execution of metal tiles,
please see the Metal Edge Detail Execution datasheet
Acoustic inlay Black non-woven acoustic fleece
as standard. Other options available
on request.
standard perforation patterns
BENEFITS
n Free-span
solution
n Rectangular
panel, adapted to corridor
or circulation area width
n Meets
visual and individual project
requirements
n Easy,
quick access to ceiling void due
to the swing-down function
n Perimeter trim is not part of the
standard solution. It’s available as an
option
APPLICATION AREA
n Corridors where the panels simply
span between walls.
Project: Terna, Roma (IT) :::::::: Architect: Gabriele Napolitano, S&PA
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Open area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Other perforation patterns available on request.
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
12 ::::
:::: 13
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance in terms of sound absorption, sound attenuation
and sound reduction. These performance values will depend
upon the perforation and the acoustic infill. Please contact us
for more information on the available factory fitted acoustic
options.
Standard colours
CROSS-SECTION - F-H 600
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
Installations
Thermal Conductivity
Wall bracket
RAL 9010
Global White
RAL 9006
F-H 600 rectangular panel
RAL 9007
Special colours
Other RAL and NCS colours available on request
Humidity Exposure
Visible side
Up to 95% RH (for short term exposure).
5 - 65
Quality Standard
Armstrong is a certified EN ISO 9001:2008 Quality Assured
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specifications or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Sustainability
*Wall bracket can be swept and installed without perimeter trim, for a gap of 0 - 90 mm
Longitudinal-section
Environmental
Our metal panels have an average of up to 30% recycled
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
Acoustics
Ceiling void
Wall bracket
Perimeter trim option
to cover gap
Safe & Healthy
%
Microperforation Rd 1522 (2)
Recycled
content
(%)
Light
reflectance
(%)
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Fire reaction
Humidity
resistance
(%) up to
Cleanability
up to
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
Bioguard
paint option
Scratch
resistance
✔
✔
wipeable
moist cloth (3)
Standard Perforation Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
Plain / Unperforated (1)
up to 30
85
0.10(L)
Not Classified
0.10
44
19
A1
95
scrubbable
Item No.
BPM 311007
✔
✔
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
✔
J-bar
5 - 65
Perimeter trim option to cover gap*
F-H 600 rectangular panel
Extra Microperforation Rg 0701 (2)
Hexagonal bolt M6
Hexagonal nut M6
Washer M6
Ceiling void
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
Designation
Wall bracket
BPM 300026
J-bar
BPM 300343
Connector for J-bar
BPM 311303
Hexagonal bolt M6 x 16 mm
BPM 311103
Hexagonal nut M6
BPM 311305
Washer M6 18 x 1.6 mm
J-bar
Hexagonal bolt M6
Hexagonal nut M6
Washer M6
Visible side
14 ::::
:::: 15
F-H 600 System
F-H 600 Swing Function
Detail A F-H 600 rectangular panel
Detail B Grid system
Detail A F-H 600 rectangular panel
Detail B Grid system
Fall 2
Wall bracket
Fall 4A
Fall A
Fall A
Wall bracket
Fall A
Hexagonal bolt M6
Hexagonal nut M6
Washer M6
Fall A
Hexagonal bolt M6
Hexagonal nut M6
Washer M6
Fall 2
Fall 4
Connector for J-bar
J-bar
G-profile
Hexagonal bolt M6
Hexagonal nut M6
Washer M6
Swing-down function
Item No.
Wall bracket
Designation
BPM 311007
Wall bracket
BPM 300171
G-profile
BPM 311303
Hexagonal bolt M6 x 16 mm
BPM 311103
Hexagonal nut M6
BPM 311305
Washer M6 18 x 1.6 mm
For further information about the edge detail execution of metal tiles, please see the Metal Edge Detail Execution datasheet
F-H 600 Swing
rectangular panel
G-profile
Metal
product
CI/SfB
(35)Xy
11/2015
k-h 400 system
Tartan grid
:::: 18
K-H 400 SYSTEM
Tartan grid
Specification
System Armstrong ceiling system K-H 400,
Hook-On solution with visible grid,
with optional hinge-down “Easy” function
with optional swing-down “Swing” function
suspension height min. 85 mm
Panel material galvanised steel sheet
panel width up to 400 mm 0.6 mm
panel width from 401 mm 0.7 mm
(aluminium or other materials on request)
Coating RAL 9010 pure white post-coated powder painted visible surface, other RAL or NCS colours on request
Execution*
rectangular panel square edged
long sides CA / DA (30 - 55 mm)
short sides E1 / F1 (30 mm)
Gap solution 3 mm gap, with black gasket on long and short side
Acoustic inlay Black non-woven acoustic fleece as
standard. Other options available on
request.
Configurable dimensions panel length (A) 600 - 2850 mm
panel width (B) 275 - 1350 mm
(panel width for Swing option 247 - 750 mm)
Grid system crossing-box 100 x 100 mm
with customised C-profile 100 mm width
Perimeter solution range of standards trims in steel and
aluminium plus custom bulkheads available
Service integration standard round or rectangular cut-outs
plus customised options on request.
Special capabilities
- triangular panel solution
- truncated pyramid solution
- chilled ceiling solution
- can be combined with other Armstrong products
* For further information about the edge detail execution of metal tiles, please see
the Metal Edge Detail Execution datasheet
standard perforation patterns
BENEFITS
n Solution for square and/or rectangular
room partitioning
n Easily installed and removed
n Grid can be emphasised by using
contrasting colours
n C-profiles
can connect to the partition
systems to integrate lighting systems
efficiently
n Decorative solutions achieved through
a variety of panel design options (square
mega panel, rectangular, triangular)
APPLICATION AREA
n Ideal for breaking up large spaces.
Project: International Book Club - City Madrid (SP) :::::::: Architect: Stitzman Staiff, David S.
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Open area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Other perforation patterns available on request.
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
19 ::::
:::: 20
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance in terms of sound absorption, sound attenuation
and sound reduction. These performance values will depend
upon the perforation and the acoustic infill. Please contact us
for more information on the available factory fitted acoustic
options.
Standard colours
Cross-section
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
expansion bolt M6
threaded rod M6
ceiling void
hexagonal nut M6
Thermal Conductivity
crossing-box
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
RAL 9010
Global White
RAL 9006
RAL 9007
custom C-profile
wall anchor
rectangular panel system K-H 400
Special colours
Other RAL and NCS colours available on request
Humidity Exposure
Up to 95% RH (for short term exposure).
Quality Standard
Armstrong is a certified EN ISO 9001:2008 Quality Assured
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specifications or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
visible side
perimeter trim
max. M/2
Longitudinal-section
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Environmental
Our metal panels have an average of up to 30% recycled
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
expansion bolt M6
threaded rod M6
ceiling void
hexagonal nut M6
wall anchor
rectangular panel system K-H 400
Sustainability
Acoustics
Safe & Healthy
perimeter trim
%
max. M/2
Recycled
content
(%)
Light
reflectance
(%)
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Fire reaction
Humidity
resistance
(%) up to
Cleanability
up to
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Standard Perforation Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Plain / Unperforated (1)
Premium B15
Premium OP19
up to 30
85
up to 30
depends on
perforation
up to 30
depends on
perforation
0.10(L)
0.65
1.00
Not Classified
C
A
0.10
0.60
0.90
crossing-box
custom C-profile
44
41
31
19
20
15
A1
A2-s1, d0
A2-s2, d0
95
scrubbable
95
wipeable
moist cloth
95
wipeable
moist cloth
Bioguard
paint option
Scratch
resistance
✔
✔
M = module size / A = panel length / B = panel width
Item No.
BPM 215004
customised
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
✔
✔
✔
Designation
crossing-box 100 x 100 mm
custom C-profile 100 mm
BPM 300144
wall anchor
BPM 311111
expansion bolt M6 x 30 mm
BPM 311099
threaded rod M6 x 1‘000 mm
BPM 311103
hexagonal nut M6
visible side
21 ::::
Detail A K-H 400 panel
Detail B grid system
layout options
expansion bolt M6
Fall 1
Fall A
threaded rod M6
wall anchor
Fall A
Fall 1
hexagonal nut M6
crossing-box
Module with 1 mega panel
Module with 2 rectangular panels
Module with 2 rectangular panels and light
integration
Module with 3 rectangular panels
Module with 4 rectangular panels
Module with 4 square tiles
(suspended by a J-bar in the middle)
Module with a diagonal custom C-profile
and 2 triangular panels
Module with 4 elements to build up a
truncated pyramid, with a centre tile or
service integration
Module with octagonal crossing-boxes and
diagonal custom C-profile, with 4 triangular
panels
custom C-profile
For further information about the edge detail execution of metal
tiles, please see the Metal Edge Detail Execution datasheet
optional K-H 400 Easy panel
with hinge-down function
optional K-H 400 Swing panel
with swing-down function
Metal
product
CI/SfB
(35)Xy
11/2015
r-h 200 system
Rectangular panels / planks
:::: 25
R-H 200 SYSTEM
RECTANGULAR PANELS / PLANKS
Specification
System Armstrong ceiling system R-H 200,
Hook-On solution with concealed grid,
suspension height min. 105 mm
Panel material
galvanised steel sheet
panel width up to 400 mm 0.6 mm
panel width from 401 mm 0.7 mm
(aluminium or other materials on request)
Coating RAL 9010 pure white post-coated
powder painted visible surface, other RAL or NCS colours on request
Execution*
rectangular panel square edged long sides
CA / DA (40 - 55 mm) short sides E1 / F4
(30 mm)
Gap solution 3 mm gap, with black gasket on one long
and one short side
Acoustic inlay Black non-woven acoustic fleece as
standard. Other options available on
request.
Standard modules 1800 x 400 mm
2100 x 400 mm
2400 x 400 mm
2700 x 400 mm
3000 x 400 mm
Configurable dimensions panel length (A) 600 - 3000 mm
panel width (B) 275 - 1350 mm
Grid system U-profile + J-bar, security bracket optional available, further suspension methods on request
Perimeter solution Range of standards trims in steel and
aluminium plus custom bulkheads available.
Service integration standard round or rectangular cut-outs
plus customised options on request.
Special capabilities
- trapezoidal panel solution
- curved panel solution
- segmented vault or wave ceiling solution
- can be combined with other Armstrong products
* For further information about the edge detail execution of metal tiles, please see
the Metal Edge Detail Execution datasheet
standard perforation patterns
BENEFITS
n Versatile system and simple design
n Concealed grid for a monolithic effect
n Good acoustic properties
n Ease of installation (alignment) and
fully demountable
n Easy access to the ceiling void
n Maintenance friendly system
Project: The City of St. Gallen (CH)
CONTRACTOR: Phonex AG
APPLICATION AREA
n Suitable for large open plan /
circulation areas
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Open area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Other perforation patterns available on request.
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
26 ::::
:::: 27
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance in terms of sound absorption, sound attenuation
and sound reduction. These performance values will depend
upon the perforation and the acoustic infill. Please contact us
for more information on the available factory fitted acoustic
options.
Standard colours
Cross-section
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
Expansion bolt M6
Ceiling void
Threaded rod M6
Hanger for J-bar
Plug-in clip
Thermal Conductivity
Wall anchor
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
RAL 9010
Global White
RAL 9006
U-profile
Clamping bracket
RAL 9007
Special colours
Other RAL and NCS colours available on request
J-bar
Humidity Exposure
Up to 95% RH (for short term exposure).
Quality Standard
Perimeter trim
Armstrong is a certified EN ISO 9001:2008 Quality Assured
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specifications or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
R-H 200 rectangular panel
Visible side
Longitudinal-section
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
Environmental
Our metal panels have an average of up to 30% recycled
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
Expansion bolt M6
Threaded rod M6
Ceiling void
Clamping bracket
R-H 200 rectangular panel
Sustainability
Acoustics
Safe & Healthy
Perimeter trim
%
Recycled
content
(%)
Light
reflectance
(%)
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Fire reaction
Humidity
resistance
(%) up to
Cleanability
up to
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Standard Perforation Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Plain / Unperforated (1)
Premium B15
Premium OP19
up to 30
85
up to 30
depends on
perforation
up to 30
depends on
perforation
0.10(L)
0.65
1.00
Not Classified
C
A
0.10
0.60
0.90
U-profile
J-bar
44
47
31
19
21
15
A1
A2-s1, d0
A2-s2, d0
95
scrubbable
95
wipeable
moist cloth
95
wipeable
moist cloth
Bioguard
paint option
Scratch
resistance
✔
✔
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
✔
✔
✔
Visible side
M = module size / A = panel length / B = panel width
Item No.
Designation
Item No.
Designation
BPM 300100
U-profile
BPM 300026
J-bar
BPM 300119
Connector for U-profile
BPM 300343
Connector for J-bar
BPM 300120
Plug-in clip
BPM 300307
Hanger for J-bar
BPM 300140
Wall anchor
BPM 311303
Hexagonal bolt M6 x 16 mm
BPM 300121
Clamping bracket
BPM 311103
Hexagonal nut M6
BPM 311111
Expansion bolt M6 x 30 mm
BPM 311305
Washer M6 18 x 1.6 mm
BPM 311099
Threaded rod M6 x 1‘000 mm
BPM 300216
Security bracket
BPM 300208
Extraction tool for R-H 200
28 ::::
Detail A R-H 200 panel
Detail B Security clip option
Fall 1
R-H 200
rectangular panel
Fall A
J-bar
Security clip
Fall A
Fall 4
Extraction tool
Detail C Grid system
Detail D Suspension methods
Hexagonal bolt M6
Hexagonal nut M6
Washer M6
Expansion bolt M6
Threaded rod M6
Clamping bracket
Plug-in clip
Wall anchor
Connector for
U-profile
Connector for
J-bar
U-profile
Plug-in clip
Hanger for J-bar
J-bar
Clamping
bracket
Hanger for
U-profile
Combi Nonius hanger
with Nonios top-part
Combi Nonius hanger
with eye wire
Project: The City of St. Gallen (CH)
CONTRACTOR: Phonex AG
Metal
product
CI/SfB
(35)Xy
11/2015
r-h 215 system
Rectangular panels / planks
:::: 32
R-H 215 SYSTEM
RECTANGULAR PANELS / PLANKS
Specification
System Armstrong ceiling system R-H 215,
Hook-On solution with concealed grid,
with optional revision opening Power Swing, suspension height min. 100 mm
Panel material
galvanised steel sheet
panel width up to 400 mm 0.6 mm
panel width from 401 mm 0.7 mm
(aluminium or further materials on request)
Coating RAL 9010 pure white post-coated
powder painted visible surface, other RAL or NCS colours on request
Execution*
rectangular panel square edged long sides
CA / DA (40 - 55 mm) short sides E8 / F8
(12 mm)
Gap solution 3 mm gap, with black gasket on one long
and one short side
Acoustic inlay Black non-woven acoustic fleece as
standard. Other options available on
request.
Standard modules 1800 x 400 mm
2100 x 400 mm
2400 x 400 mm
2700 x 400 mm
3000 x 400 mm
Configurable dimensions panel length (A) 600 - 3000 mm
panel width (B) 275 - 1350 mm
Perimeter solution Range of standards trims in steel and
aluminium plus custom bulkheads available.
Service integration standard round or rectangular cut-outs
plus customized options on request.
Special capabilities
- trapezoidal panel solution
- facetted ceiling solution
- can be combined with other Armstrong products
Grid system U-profile + H-profile 35, security bracket
optional available, further suspension
methods on request
* For further information about the edge detail execution of metal tiles, please see
the Metal Edge Detail Execution datasheet
standard perforation patterns
BENEFITS
n Versatile system and simple design
n Concealed grid for a monolithic effect
n Good acoustic properties
n Ease of installation (alignment) and
fully demountable
n Easy access to the ceiling void
n Maintenance friendly system
APPLICATION AREA
n Suitable for large open plan /
circulation areas
Project: Train station Zürich Löwenstrasse (CH) :::::::: Architect: Dürig AG
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Open area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Other perforation patterns available on request.
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
33 ::::
:::: 34
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance of sound absorption. All perforated products can
be supplied with a variety of factory fitted acoustic infill options.
Please contact us for more information.
Standard colours
Cross-section
20% gloss
12% gloss
30% gloss
30% gloss
expansion bolt M6
ceiling void
threaded rod M6
Thermal Conductivity
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
plug-in clip
hanger for H-profile 35
wall anchor
RAL 9010
Global White
RAL 9006
U-profile
clamping bracket
RAL 9007
Special colours
Other RAL and NCS colours available on request
~67
Up to 95% RH (for short term exposure).
H-profile 35
Quality Standard
Services Integration
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
perimeter trim
Armstrong is a certified EN ISO 9001:2008 Quality Assumed
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specificaitons or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
rectangular panel system R-H 215
max. M/2
Longitudinal-section
Environmental
Our metal panels have an average of up to 30% recycling
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
expansion bolt M6
threaded rod M6
ceiling void
clamping bracket
Acoustics
H-profile 35
U-profile
~67
rectangular panel system R-H 215
Sustainability
visible side
Safe & Healthy
perimeter trim
visible side
%
max. M/2
Recycled
content
(%)
Light
reflectance
(%)
aw
Sound
absorption
class
NRC
up to
Dncw / Dnfw
(dB)
up to
Rw
(dB)
up to
Fire reaction
Humidity
Resistance
(%) up to
Cleanability
up to
Extra Microperforation Rg 0701 (2)
up to 30
80
0.55(L)
D
0.65
21
10
A2-s2, d0
95
wipeable
moist cloth (3)
Microperforation Rd 1522 (2)
up to 30
65
0.70
C
0.70
16
6
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Standard Perforation Rg 2516 (2)
up to 30
70
0.75(L)
C
0.80
18
8
A2-s2, d0
95
wipeable
moist cloth (3)
✔
Plain / Unperforated (1)
up to 30
85
0.10(L)
Not Classified
0.10
44
19
A1
95
scrubbable
Bioguard
paint option
Scratch
resistance
✔
✔
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
✔
M = module size / A = panel length / B = panel width
Item No.
Designation
Item No.
Designation
BPM 300100
U-profile
BPM 311400
H-profile 35
BPM 300119
connector for U-profile
BPM 300343
connector for H-profile 35
BPM 300120
plug-in clip
BPM 300307
hanger for H-profile 35
BPM 300140
wall anchor
BPM 311303
hexagonal bolt M6 x 16 mm
BPM 300121
clamping bracket
BPM 311103
hexagonal nut M6
BPM 311111
expansion bolt M6 x 30 mm
BPM 311305
washer M6 18 x 1.6 mm
BPM 311099
threaded rod M6 x 1‘000 mm
BPM 300216
security bracket
98
Humidity Exposure
98
RAL 9010
Global White
RAL 9006
RAL 9007
35 ::::
Detail A R-H 215 panel
Detail C grid system
hexagonal bolt M6
hexagonal nut M6
washer M6
Fall 8
Fall A
Detail E suspension methods
expansion bolt M6
threaded rod M6
clamping bracket
plug-in clip
Fall A
Fall 8
wall anchor
connector for U-profile
connector for H-profile 35
Detail B R-H 215 Power Swing panel
Fall 2
Fall A
plug-in clip
U-profile
Fall A
hanger for
H-profile 35
clamping bracket
with threaded rod
U-profile hanger
with threaded rod
combi Nonius hanger
with Nonius to part
combi Nonius hanger
with eye wire
H-profile 35
Fall 2
For further information about the edge detail execution of metal
tiles, please see the Metal Edge Detail Execution datasheet
optional R-H 215 Power-Swing panel
with swing-down function as revision
opening
Detail D security bracket
H-profile 35
rectangular panel system R-H 215
security bracket
Project: OBERWAID Health resort & Medical Center, St Gallen (CH) :::::::: Architect: Carlos Martinez Architekten AG
SOLUTION: R-H 215 Plain
Metal
product
CI/SfB
(35)Xy
11/2015
D-H 700 system
Floating Ceilings
:::: 39
D-H 700 SYSTEM
Floating Ceilings
Specification
System Armstrong ceiling system D-H 700,
Island Hook-On solution with concealed grid, suspension height min. 105 mm
Panel material galvanised steel sheet
panel width up to 400 mm 0.6 mm
panel width from 401 mm 0.7 mm
(aluminium or other materials on request)
Coating RAL 9010 pure white post-coated powder
painted visible surface, other RAL or NCS
colours on request
Execution* standard panel
rectangular panel square edged
long sides CA / DA (30 - 50 mm)
not visible, short sides E4 / F4 (50 mm) visible
Execution* end panel
rectangular panel square edged
one long side CA (30 - 50 mm not visible,
one long side DA (50 mm) visible
short sides E4 / F4 (50 mm) visible
Execution* single panel rectangular panel square edged
long sides CA / DA (50 mm) visible
short sides E4 / F4 (50 mm) visible
Gap solution 0 mm gap, without gasket
Acoustic inlay Black non-woven acoustic fleece as
standard. Other options available on
request.
Configurable dimensions
panel length (A) 600 - 2750 mm
(in steps of 25 mm)
panel width (B) 250 - 600 mm (in steps of 25 mm)
Grid system U-profile cross-connected with security
bracket to secure end panels
Service integration standard round or rectangular cut-outs
plus customised options on request
Special capabilities
- chilled ceiling solution
- can be combined with other Armstrong
products
* For further information about the edge detail execution of metal tiles, please see
the Metal Edge Detail Execution datasheet
standard perforation patterns
BENEFITS
n Modular concept for optimum flexibility
n Visually defines a space
n Freedom in design
n Modern absorber solution for exposed
soffits
n Meets
demanding acoustic requirements
n Integration of lighting, air conditioning
and other equipment
n Quick and easy to install
APPLICATION AREA
n A contemporary design and acoustic
solution for all market segments.
Chilled beams or chilled ceiling
elements can be integrated within
D-H 700.
Project: Siemens, Roma (IT) :::::::: Architect: SPA Group
Extra Microperforation
Rg 0701
Hole diameter: 0.7 mm
Free area: 1.5 %
Microperforation
Rd 1522
Hole diameter: 1.5 mm
Open area: 22%
Other perforation patterns available on request.
Standard Perforation
Rg 2516
Hole diameter: 2.5 mm
Open area: 16%
40 ::::
:::: 41
Acoustic Performance
Colour
Metal ceiling systems have been tested for their acoustic
performance of sound absorption. All perforated products can
be supplied with a variety of factory fitted acoustic infill options.
Please contact us for more information.
Standard colours
Cross-section
RAL 9010
Global White
RAL 9006
RAL 9007
20% gloss
12% gloss
30% gloss
30% gloss
expansion bolt M6
threaded rod M6
Thermal Conductivity
ceiling void
(λ) W/mK
50.0 : Steel
0.04 : Acoustic fleece
RAL 9010
Global White
RAL 9006
RAL 9007
cross-connector for
U-profile
plug-in clip
Special colours
Other RAL and NCS colours available on request
Humidity Exposure
Up to 95% RH (for short term exposure).
2 x thread cutting
screw M6
2 x hexagonal nut M6
hanger for U-profile
plug-in clip
U-profile
Quality Standard
Services Integration
Armstrong is a certified EN ISO 9001:2008 Quality Assured
Manufacturer. All Armstrong ceiling and grid systems are
manufactured to the relevant tolerances and quality standards
appropriate to material. Where differences exist between this
and any expressed or implied architectural specifications or
requirements then Armstrong’s manufacturing standards will
prevail unless stated otherwise.
Metal panels can be supplied with factory produced cut
outs and apertures for the integration of building services
equipment.
Cleaning
Dust should be removed from the painted surface by wiping
with a clean soft cloth. More stubborn marks should be
removed with a mild household detergent in warm water.
Excessive use of water should be avoided. The use of
abrasive cleaners of the painted surface is not recommended.
thread cutting screw M6
rectangular panel system D-H 700
visible side
U-profile
Longitudinal-section
Environmental
Our metal panels have an average of up to 30% recycled
content. Our European manufacturing plants are certified to:
ISO 14001:2004 + Cor. 1:2009
Armstrong is a member of TAIM (Technical Association of
Industrial Metal Ceilings).
expansion bolt M6
threaded rod M6
ceiling void
2 x hexagonal nut M6
hanger for U-profile
Sustainability
security bracket
2 x plug-in clip
cross-connector for
U-profile
2 x thread cutting
screw M6
Safe & Healthy
end panel system D-H 700
standard panel system D-H 700
%
ISO 14021
For chilled ceilings or additional acoustic inlays the bending height of the panel will change from 50mm to 65mm.
Recycled content
(%)
Light
reflectance
(%)
Fire reaction
Humidity
resistance
(%) up to
Cleanability
Bioguard paint option
Scratch resistance
Extra Microperforation Rg 0701 (2)
up to 30
80
A2-s2, d0
95
wipeable
moist cloth (3)
✔
✔
Microperforation Rd 1522 (2)
up to 30
65
A2-s2, d0
95
wipeable
moist cloth (3)
Standard Perforation Rg 2516 (2)
up to 30
U-profile
70
A2-s2, d0
95
Item No.
✔
wipeable
moist cloth (3)
Plain / Unperforated (1)
up to 30
85
A1
95
scrubbable
Premium OP19
up to 30
depends on perforation
A2-s2, d0
95
wipeable
moist cloth
✔
✔
✔
✔
(1) RAL 9010 colour, without acoustic inlay. (2) RAL 9010 colour, with black acoustic fleece glued on rear. (3) Wipeable moist cloth for preforated tiles with fleece. Scrubbable for plain tiles or perforated tiles without fleece.
Designation
Item No.
Designation
BPM 300100
U-profile
BPM 311099
threaded rod M6 x 1‘000 mm
BPM 300119
connector for U-profile
BPM 311103
hexagonal nut M6
BPM 300120
plug-in clip
BPM 315710
cross-connector for U-profile
BPM 300366
hanger for U-profile
BPM 311195
thread cutting screw M6 x 10 mm
BPM 311111
expansion bolt M6 x 30 mm
BPM 315711
security bracket H = 50 mm
visible side
42 ::::
Detail A D-H 700 standard panel
Detail D grid system
Fall 4
Fall A
U-profile
expansion bolt M6
cross-connector for U-profile
Fall A
threaded rod M6
2 x hexagonal nut M6
connector for U-profile
Fall 4
hanger for
U-profile
security bracket
(for end panels only)
Detail B D-H 700 end panel
2 x plug-in clip
4 x thread
cutting screw M6
Fall 4
Fall A
plug-in clip
2 x plug-in clip
2 x plug-in clip
Fall A
Fall 4
Detail C D-H 700 single panel
Fall 4
Fall A
Fall A
Fall 4
For further information about the edge detail execution of metal
tiles, please see the Metal Edge Detail Execution datasheet
Modular option 1
Modular option 2
Single panel
End panel
End panel
End panel
Standard panel
Standard panel
Standard panel
Standard panel
End panel
layout options
Single panel option
PROJECT : Siemens, Roma (IT) :::::::: ARCHITECT : SPA Group
Belgium & Luxembourg
Armstrong Building Products B.V.
Postbus 3803
4800 DV Breda
Netherlands
Tel.: +32 02 223 00 72
Fax: +31 (0) 76 521 04 07
e-mail: benelux-info@armstrong.com
www.armstrongplafonds.be
Germany & Switzerland
Armstrong Building Products
Kundenservice
Office Building Quadrium
Claudius Prinsenlaan 126
4818 CP Breda
Netherlands
Tel.: +49 (0) 251 7603 210
Fax: +49 (0) 251 7603 593
e-mail: deutsche-info@armstrong.com
www.armstrongdecken.de
www.armstrong-decken.at
www.armstrong.ch
Firmensitz
Armstrong Building Products GmbH
Robert-Bosch-Str. 10
48153 Münster
Germany
Armstrong Metalldecken AG
Breitfeldstrasse 8
9015 St. Gallen
Switzerland
Tel.: +41 (0) 71 313 63 63
Fax: +41 (0) 71 313 64 00
e-mail: gema@armstrong.com
www.armstrong.ch
www.gema.biz
Zentralschweiz
Armstrong Metalldecken AG
Büro / Lager Zentralschweiz
Grossweid 9
6026 Rain
Switzerland
Tel.: +41 (0) 41 921 63 63
Fax: +41 (0) 41 921 63 80
e-mail: gema@armstrong.com
www.armstrong.ch
www.gema.biz
Armstrong Plafonds Métalliques SA
Bureau et Dépôt Suisse Romande
Avenue de Châtelaine 87
1219 Châtelaine
Suisse
Tel.: +41 (0) 22 731 60 70
Fax: +41 (0) 22 731 60 74
e-mail: gema@armstrong.com
www.armstrong.ch
www.gema.biz
Austria
Armstrong Metalldecken GmbH
Bundesstrasse 70
6830 Rankweil
Austria
Tel.: +43 (0) 55 22 34 44-0
Fax: +43 (0) 55 22 34 44-8
e-mail: gema@armstrong-decken.at
www.armstrong-decken.at
www.gema.biz
Armstrong Metalldecken GmbH
Messendorferstrasse 6
8041 Graz
Austria
Tel.: +43 (0) 316 471 584
Fax: +43 (0) 316 471 584-10
e-mail: gema@armstrong-decken.at
www.armstrong-decken.at
www.gema.biz
Spain & Portugal
Armstrong Building Products SAS
Immeuble Paryseine
3, allee de la Seine
94854 Ivry-sur-Seine Cedex
France
Phone: + 34 91 642 04 99
info-espana@armstrong.com
www.armstrongtechos.es
France
Armstrong Building Products SAS
Bureaux Commerciaux France
Immeuble Paryseine
3 Allée de la Seine
94854 Ivry-sur-Seine
France
Tel.: 0800 41 36 43
Fax: +33 1 45 21 04 11
e-mail: info-France@armstrong.com
www.armstrongplafonds.fr
Siège social
Armstrong Building Products SAS
67 rue de Salins – CS 20089
25302 Pontarlier Cedex
France
Italy & Greece
Armstrong Building Products
Uffi cio Commerciale Italia
Immeuble Paryseine
3 Allée de la Seine
94854 Ivry-sur-Seine
France
Tel.: +39 02 66 22 76 50
Fax: +39 02 66 20 14 27
e-mail: info-italia@armstrong.com
www.armstrongsoffitti.it
Netherlands
Armstrong Building Products B.V.
Postbus 3803
4800 DV Breda
Netherlands
Tel.: (+31) 076 523 02 00
Fax: (+31) 076 521 04 07
e-mail: benelux-info@armstrong.com
www.armstrongceilings.nl
United Kingdom
Armstrong World Industries Ltd
Building Products Division
Armstrong House
38 Market Square
Uxbridge UB8 1NG
United Kingdom
Tel.: 0800 371 849
Fax: +44 1895 274287
e-mail: sales-support@armstrong.com
www.armstrongceilings.co.uk
Republic of Ireland
Armstrong World Industries Ltd.
108 Greenlea Road
Terenure
Co Dublin 6W
Ireland
Tel.: 1800 409002
Tel.: (+353) 1 499 1701
Fax: (+353) 1 490 7061
e-mail: sales-support@armstrong.com
www.armstrongceilings.ie
Central
Europe North
(DK/EE/FIN/IS/LT/LV/N/PL/S)
Armstrong Building Products BV
Sp. z o.o. Oddział w Polsce
ul. Domaniewska 37
02-672 Warszawa
Poland
Tel.: (+48) 22 337 86 10/ 86 11
Fax: (+48) 22 337 86 12
e-mail: service-ce@armstrong.com
Latvia: www.armstrong.lv
Lithuania: www.armstrong.lt
Norway: www.armstrong.no
Poland: www.armstrongsufity.pl
Sweden: www.armstrong.se
Central
Europe South
(AL/BA/BG/CZ/HR/HU/KO/
MD/ME/MK/RO/RS/SK/SI)
Armstrong Building Products
Lighthouse building,
Jankovcova 1569/2c,
170 00 Praha 7,
Czech Republic
Tel.: +420 725 477 588
e-mail: service-ce@armstrong.com
Czech Republic: www.armstrong.cz
Hungary: www.armstrong.co.hu
Romania: www.armstrong.ro
Serbia: www.armstrong.rs
Slovakia: www.armstrong.sk
Slovenia: www.armstrong.si
www.armstrongceilings.eu
Eastern
Europe
CIS
Armstrong Moscow GmbH
Mosfi lmovskaya Street 38A,
Moscow 119285,
Russian Federation
Tel.: +7 (495) 258 5100
Fax: + 7 (495) 258 5103
e-mail: info-cis@armstrong.com
Russian Federation:
www.armstrongceilings.ru
MIDDLE EAST /
AFRICA / TURKEY
Armstrong World Industries Ltd
Africa Middle East Turkey
Division
Armstrong House
38 Market Square
Uxbridge UB8 1NG
Tel.: +44 01895 202097
Fax: +44 01895 272928
e-mail: sales-support@armstrong.com
www.armstrong.eu
Israël: www.armstrong.co.il
South Africa:
www.armstrong-ceilings.co.za
Middle East Regional Office,
Dubai, UAE & French Speaking
Africa
Offi ce No. 2003, 20th Floor
Gold Crest Executive Tower
Jumeirah Lakes Towers
P.O. Box 73831
Dubai, United Arab Emirates
Tel.: +971 4 453 4545
Fax: +971 4 453 4546
info-me@armstrong.com
www.armstrong.ae
Turkey
Armstrong Europa GmbH
Mimar Sinan Mah. Mimar Sinan
Cad. No: 35/2 Cekmekoy
Istanbul
Turkey
Gsm: +90 542 772 49 22
Gsm: +90 544 293 5931
www.armstrong.com.tr
etulpar@armstrong.com
10/2015 - PAS1205 - Armstrong Building Products - RCS Besançon B 784 131 575 Printed on chlorine free paper.
Western
Europe