Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional Super Slim LED Panel CRI>80 2010.2 2011.1 2011.9 2011.12 80lm/w Ultra Energy Saving XPL-S 2011.12 80lm/w Ultra Slim 8.7mm XPL-X/H 2013.2 LED PANEL GOT TUV Certification SUPER SLIM LED PANEL Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional Your Smart Choice CRI>80 3 SUPER SLIM LED PANEL Ambient Temperature & Output Brightness Normalized Luminous Flux 25 C 60% RH Ambient Temperature Humidity ˚C) Ambient Temperature( Relative luminous fux vs. thermal pad temperature for White series. 1 hours 6 hours 12 hours 24 hours 48 hours 29 30 30 31 30 C C C C C 1 hours 6 hours 12 hours 24 hours 48 hours 48 49 50 50 50 C C C C C 1 hours 6 hours 12 hours 24 hours 48 hours 53 54 54 54 55 C C C C C 1 hours 6 hours 12 hours 24 hours 48 hours 58 58 59 59 59 C C C C C The button of the heat sink The Frame Aluminum PCB warranty 80lm/w 5 PF>95 Dimmiable Optional Thickness YRS POW 8.7mm LED Foot( Solder ) CRI>80 4 SUPER SLIM LED PANEL Products Photo White border, the more good-looking Ceiling/ Hanging/ Embeddedinstallation Advanced light guide plate, light guide 94%, the whole light transmittance of 84% HF sensor switch /Emergency power system suitable Aluminum back directly into the framework to make the product more solid, while the panel lights back will not happen leaked The blue part represents the aluminum back 8.7mm ultra slim panel Solid line cap, the bigger and more solid Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional Special screws to make the product more firm CRI>80 5 SUPER SLIM LED PANEL Dimension XPL-S3030 XPL-S3060 296mm 11.65" 180mm 7.09" 296mm 11.65" XPL-S30120 296mm 11.65" 596mm 23.46" 596mm 23.46" 251mm 9.88" 16mm 0.63" 551mm 21.69" 596mm 23.46" 11.5mm 21mm 551mm 21.69" Round Panel 1196mm 47.08" 1151mm 42.69" S60120 185mm 7.28" 235mm 9.25" 251mm 9.88" 1196mm 47.08" XPL-R9 551mm 21.69" 551mm 21.69" 296mm 11.65" 251mm 9.88" 132mm 5.20" XPL-S6060 596mm 23.46" XPL-R7 251mm 9.88" 1151mm 42.69" XPL-7C Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional Input Voltage 100-240V/AC CRI>80 6 SUPER SLIM LED PANEL Why Choose TOPO Panel Light Low-efficiency diffuse reflection Desired Exit Angle Lighting from light source Light guide Printed, chemical, or laser etched features High-efficiency specular reflection Desired Exit Angle Lighting from light source Light guide warranty 80lm/w 5 PF>95 Dimmiable Optional Thickness YRS POW 8.7mm Microlens light distribution features CRI>80 7 SUPER SLIM LED PANEL 24Vdc Panel Data Info 24Vdc X Series LED Panel, The Most Power Saving Panel Lamp with 80lm/w And CRI>80 Luminous Flux (lm) CW NW WW Dimension(mm) W(width),L(length),H(height) LED Q'ty Power (w) XPL-X3030 1729 1625 1573 296W×296L×8.7H 72 pcs 5630 SMD Epistar/Sanan 22±1 XPL-X3060 3502 3292 3187 296W×596L×8.7H 144 pcs 5630 SMD Epistar/Sanan 44±2 XPL-X6060 3577 3362 3255 596W×596L×8.7H 144 pcs 5630 SMD Epistar/Sanan 44±2 XPL-X6262 3580 3365 3258 620W×620L×8.7H 144 pcs 5630 SMD Epistar/Sanan 44±2 XPL-X30120 5689 5408 5228 296W×1196L×8.7H 288 pcs 5630 SMD Epistar/Sanan 72±3 XPL-X60120 5692 5414 5233 596W×1196L×8.7H 288 pcs 5630 SMD Epistar/Sanan 72±3 Model Number 24Vdc input warranty 80lm/w 5 PF>95 Dimmiable Optional Thickness YRS POW 8.7mm LED PANEL CRI>80 8 SUPER SLIM LED PANEL 100-240Vac Directly Main Power Panel Data Info 100-240Vac XPL-H Series LED Panel, The Most Power Saving Panel Lamp with 80lm/w And CRI>80 Luminous Flux (lm) Dimension(mm) W(width),L(length),H(height) LED Q'ty Power (w) 1621 296W×296L×8.7H 72 pcs 5630 SMD Epistar/Sanan 22±1 3391 3282 296W×596L×8.7H 144 pcs 5630 SMD Epistar/Sanan 44±1 3684 3463 3352 596W×596L×8.7H 144 pcs 5630 SMD Epistar/Sanan 44±1 TP-XPL-H6262 3687 3466 3355 620W×620L×8.7H 144 pcs 5630 SMD Epistar/Sanan 44±1 TP-XPL-H30120 6765 6359 6156 296W×1196L×8.7H 288 pcs 5630 SMD Epistar/Sanan 85±1 TP-XPL-H60120 6902 6488 6281 596W×1196L×8.7H 288 pcs 5630 SMD Epistar/Sanan 85±1 TP-XPL-R7 842 788 741 ¢180(7 inch)×H19 110 pcs 3528 SMD Epistar/Sanan 11 TP-XPL-R9 1024 954 908 ¢240(9 inch)×H19 168pcs 3014 SMD Epistar/Sanan 17±1 Model Number CW NW WW TP-XPL-H3030 1781 1674 TP-XPL-H3060 3607 TP-XPL-H6060 100~240Vdc input Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional constant currence dirver CRI>80 LED PANEL 9 SUPER SLIM LED PANEL Spectrum 100 Cool White lative Intensity(% ) 80 Neutral White Warm White 60 40 20 0 400 425 450 475 500 525 550 575 600 625 650 675 700 725 Wavelength (nm) Cool White, neutral white and warm white color spectrum at T= J 25˚C. 100 Relative Intensity(% ) 80 60 40 20 0 Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional Red, Amber, True Green, Blue, Dental Blue color spectrum at T J =25˚C CRI>80 10 SUPER SLIM LED PANEL LED Chip LM80 LED Performance Factors Chip Size LED light output Current Heat LED life hours Chip Size Current LED CRI Phosphor *Larger chip size, better heat dissipation, better phosphor, the appropriate current, will allow longer LED life. SMD LED Normal LED Package 5630 SMD 5630 Package Chip Brand Package Rjs: 160 deg/w Package Rjs: 45 deg/w Heat radiation system is much better for the 5630 "Heat Sink Package" than any other led, 3020 3528 5050 etc. @30mA. Epistar/SANAN Lumen/Current Solder Temperature Humidity 5630 Heat Sink Pacjage 150ma 50 C 60% RH Specifications - 5.6mm x 3mm x 1mm, industry standard foot print,high efficiency,PB-free,120degree viewing angle. Luminous Intensity that uses - 55lm @ 150mA. Life prediction RA test result Prediction Life Luminous ratio (%) 120.0% 110.0% 100.0% 90.0% 80.0% L70, 26548 70.0% 60.0% L50, 50613 50.0% Thickness YRS POW 8.7mm 10 warranty 80lm/w 5 PF>95 Dimmiable 100 Optional 1 CRI>80 1000 10000 Time (hr) 100000 1000000 11 SUPER SLIM LED PANEL IESNA LM-79-2008 IES FILES All products here have test report for LM-79-2008 report by or salers. RayFact for truer lighting You can got it from website Goniophotometer Goniophotometers can measure all types of lighting sources and luminaires includinglamps of all kinds, indoor and outdoor luminaires, and floor lights of all kinds on C-γ plan and B-β plan, with high accuracy. IESNA files output and match international universal lighting design software, meets the requirement CIE and IESNA standard. Beam Iris diaphragm wall Diaphragm 1st Goniophotometer Diaphragm 2nd Diaphragm 3rd 出线孔 19-inch rack Computer Passage Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional Control Room CRI>80 Probe 12 SUPER SLIM LED PANEL Installation schematic diagram for hanging installation schematic diagram for embedded installation schematic diagram for ceiling installation screw hole ceiling fixture 15cm thickness 1. move away ceiling plaster slab, then arrange the wire. 1. install the hanging fixed box to ceiling and connect the power wire. 1. install the ceiling fixture to ceiling. screw through the hole on the fixture power supply 2. put through the panel light along ceiling’s diagonal and then wiring. 2. connect the power wire to power adapter 2. connect the wire the panel power supply in the box here 3. fix the panel light to suitable place. 3. put the panel in the fixture. Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional 3. connect the power wire to panel. CRI>80 13 SUPER SLIM LED PANEL schematic diagram for hanging installation 1. install the hanging fixed box to ceiling and connect the power wire. 1 2 the max hanging heigh is 1.2m 2. connect the wire the panel power supply in the box here 3 3. connect the power wire to panel. schematic diagram for ceiling installation screw hole ceiling fixture 15cm thickness 1. install the ceiling fixture to ceiling. screw through the hole on the fixture 1 2 power supply 2. connect the power wire to power adapter 3 Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional 3. put the panel in the fixture. CRI>80 14 SUPER SLIM LED PANEL HF(High Frequent)-Sensor Automatic HF sensor light sensor is the use of the latest lighting technology combined with high-tech products, widely used in the staircase, hallway, bathroom, corridors and other public places. Built-in body sensor. People come in, the light turn on, people leave, the lights turn off. (delay about 30 seconds) without switch equipment. When the human body leave, it will automatically turn off after the delay(30 seconds), energy-saving and convenience. When person come near the lamp, PIR swith automatically turn on. When the light is less than 10LUX (dark time), the body movement sensor light will automatically capture the low-frequency signals. It will light when people come and turn off when people leave. Technical Parameters Sensing modes: high frequent body sensor + light control Delay time: 30 seconds sensing distance: ≦ 8 meters (20 ℃ ambient temperature) Sensing angle: 140 °. Illuminance sensor is less than 20LUX Power supply LED PANEL HF sensor switch Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional 100-240Vac CRI>80 15 SUPER SLIM LED PANEL Emergency Power Solutions Program process Confirm the brightness of the lamp in the state of emergency Confirm the emergency mode Confirm the emergency hours Emergency Mode Mode A: Normal time, lights turn on. Power outage time, the lamp is lit. Mode B: Normal time, lights turn off. Power outage time, the lamp is lit. Emergency Brightness Emergency Brightness, from 20%~100%(30% suggested). Emergency hours Emergency hours from 1 hrs ~3 hrs (1hrs suggested). Circuit Connection Diagram Emergency Brightness 100% Driver inside or constant currence driver lamp must be 100% brightness when emergency hours. Emergency Brightness 220Vac warranty 80lm/w PF>95 Dimmiable Optional POW Thickness 5 220Vac Constant Voltage 220Vac YRS LED LAMP LED Driver 20%~99 % Driver onside and constant voltage driver lamp can be 20%~99% brightness when emergency hours. 8.7mm Emergency Power CRI>80 Emergency Power LED LAMP Constant Voltage 16 SUPER SLIM LED PANEL 24V Series Panel Dimmable AC220V IN 24V Power Supply DC 24V PWM Dimmer CR-VS-SIR IR PWM Dim 8A 192W MAX CR-VS-SRF RF PWM Dim 8A 192W MAX Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional CR-VS-AP IR PWM Dim AP 4A/CH 96W/CH MAX CRI>80 17 SUPER SLIM LED PANEL 24V Series Panel High Power Dimmable Case XPL-600X600 OR 12V POWER SUPPLY 100W 220V/AC Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional 24V POWER SUPPLY 360W CRI>80 220V/AC 18 SUPER SLIM LED PANEL High Quality Driver Input Voltage: 3.75KV Test Seconds: 60s Test Result: Less 20ma LED Driver 1 2 Output Voltage Input Voltage Power Factor Character 5KV High Voltage Test Machine Isolated Driver EFFICIENCY vs LOAD (48V Model) EFFICENCY(%) PLC-60 series possess superior working efficiency that up to 89% can be reached in field applications. Block Diagram Derating Curve Static Characteristics Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable INPUT VOLTAGE(V) 60Hz Optional AMBIENT TEMPERATURE( C) CRI>80 19 SUPER SLIM LED PANEL Traic Dimmiable Opintional The dimmiable solution also need a controller(CR-DMTR load 150W lamps max) to control dimmiable lamps. If Total lamps power over 150W, it also need a Amplier (CR-AP-TR load 600W lamps max) . 1.Long life, up to 50,000+ hours 2.Significantly reduces maintenance costs 3.Low wattage consumption 4.Electricity consumption reduced 80-90% 5.Vibration resistant, solid state electronic circuitry 6.Internal TVS surge protection 7.Low heat generation saves HVAC operating costs Infrared Remote Control TRIAC Dimmer CR-DMTR TRIAC Amplier CR-AP-CR AP Amplier 95Vac-140Vac or 185Vac-250Vac AP Amplier Controller 10M AP AP Amplier Amplier Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional LED LAMP CRI>80 20 SUPER SLIM LED PANEL PACKING INFORMATION one pices Label PRODUCT COLOR: WARM WHITE CCT: 2700K QUANTITY: 1PCS QC Mail: DATE: 2011-01-5 SUPPLYER INFO: ORDER CODE:1012280101 1012280101 Inside box Maximums five reels Outside box Maximums five boxes STORAGE CONDITIONS Before opening the package: The LEDs should be kept at 30 C or less and 70%RH or less. The LEDs should be used within a year. When storing the LEDs, moisture proof packaging with absorbent material (silica gel) is recommended. After opening the package: The LEDs should be kept at 30 C or less and 50%RH or less. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with packages of moisture absorbent material (silica gel). It is also recommended to return the LEDs to the original moisture proof bag and to reseal the moisture proof bag again. SAFETY INFORMATION The components can not be mechanically pressed. Correct electrical polarity needs to be observed. Ensure the power is adapt to operate the total load. Installation must not damage the conducting paths on the circuit board. Parallel connection is highly required as safe electrical operation mode. Pay attention to ESD precautions during assembling. Assembly of LED modules includes power supplier must be appropriately. When installing on metallic or other surface, an electrical isolation point between strip and the installing surface is recommended. Only qualified person allowed to operate installations. Thickness YRS POW 8.7mm warranty 80lm/w 5 PF>95 Dimmiable Optional Damaged by corrosion will not be materials defect claim. It is the user's responsibility to provide a suitable protection against moisture, condensation and other harmful elements. CRI>80 21