H-MoSS ® H-MOSS® Occupancy Sensors Hubbell Motion Sensing Switches Daylighting Controls - The Daylight Tracker™ H-MoSS ® Hu bbe ll M otion Sensing Switc he s Hubbell’s Daylight Tracker – DHT is a unique photo-sensing device that utilizes available daylight, saving on energy costs in rooms that are adequately lit. When installed, sufficient daylight will automatically signal the Tracker to selectively deactivate the lighting. A dimming unit, model DHTD senses ambient light and dims IC controllable electronic ballasts through 0-10V available signals according to changes in daylight and lamp lumens. The DHTD automatically dims lighting to maintain preset light level conditions. Key Features • Low voltage daylight control • Adaptive photoelectric light level sensor • Fully adjustable time delay •Programmable • Compatible with new lighting systems • Contemporary ceiling mount design • UL and cUL listed • Five-year warranty Features and Benefits Features Adaptive photoelectric light level sensor Benefits Increases energy savings by dimming or turning off lights when there is sufficient natural light. Fully adjustable time delay Minimizes nuisance switching (e.g. cloudy areas would require a longer delay). Programmable Reduces energy usage by activating lights at predetermined foot candle levels in specified areas only when artificial light is necessary. Applications •Areas with natural illumination •Entrance ways •Windowed offices •Breeze ways •Task lighting www.hubbell-wiring.com H-MOSS® Occupancy Sensors Daylighting Controls - The Daylight Tracker™ Daylighting Control Description Daylight Tracker On/Off Control Dimming Control DHT * DHTD *Must use with CU300A Specifications Timer Operating Environment User Interface Indicators Sensitivity Construction Input voltage DHTD Size & Weight Color Mounting Certifications Warranty Fully adjustable time delay: 3 minutes to 15 minutes 0°F – 100°F (-18°C – 38°C) Dip switch selection of preset light level; Bypass override available Red and green LED status indicators Factory calibrated foot-candle settings; 10 - 250FC High impact plastic enclosure with metal base DT: 24V DC, 10mA (requires CU300A power pack – not included) DHTD: 0-10V DC, 10.5V DC supply from ballast Dimmer control to maintain present lighting levels; Controls up to 50 ballasts; Compatible with 0-10V DC IC controllable ballasts; Does not require a power/switch pack 4.72"L x 2.76"W x 1.10"D (119.9mm L x 70.1mm W x 27.9mm D) White Single-gang box UL and cUL Listed 5 years Wiring Schematic DHT DHTD ® Wiring Device-Kellems www.hubbell-wiring.com Hubbell Wiring Systems • Hubbell Incorporated (Delaware) • 40 Waterview Drive • Shelton, CT 06484 • Phone (800) 288-6000 • FAX (800) 255-1031 Printed in U.S.A. Specifications subject to change without notice. H-MOSS® is a registered trademark of Hubbell Incorporated. WLDSHM012 8/11