PRINTER’S INSTRUCTIONS:
BROCHURE,AIGIS,MT9230 PARAPET MOUNT - LINEAR P/N: 231463A - INK: 4/4: 4-COLOR PROCESS - PAPER STOCK: 80# GLOSS COVER - SIZE: FLAT: 11.000” X 17.000” FOLDED: 8.5000" X 11.000" - FINISH: 4 PAGE: WITH 3-HOLE 1/4" DRILL - SCALE: 1-1 - SIDE 1 OF 2
• Aluminum Parapet
Mount
• Swivels to Allow Easy
Positioning
• Sturdy Construction
• Attractive Appearance
• Lightweight
Now Part of
• Corrosion-Resistant Finish
Parapet Mount
End Cap
229
9.0
1-1/2 NPT
10-24 x 5/16
Pan Head Screw
Stainless Steel
1-1/2 NPT (1 included)
1191
46.88
69.8
2.75
End Cap
Pipe Arm
229
9.0
1-1/2 NPT
1191
46.88
616
24.2510-24 x 5/16
Pan Head Screw
Stainless Steel
3/8-18 x 3/4 Hex Head Bolt 69.8
(1 included)
Stainless Steel (3 included) 2.75
Mounting Bracket
616
24.25
Pipe Arm
101.6 Typ.
4.0 3/8-18 x 3/4 Hex Head Bolt
Stainless Steel (3 included)
Mounting Surface
Mounting Bracket
8x O 10
0.41
MT9230
114.3 Typ.
4.5
976
38.43
88.1
101.6 Typ.
The MT9230 Parapet
3.47 mount is designed to extend a camera more than 3 feet beyond a
4.0
228.6
9.0
976
346
38.43
13.63
1022
40.25
616
24.25
3/8-18 x 3/4 Hex Head Bolt
Stainless Steel (3 included)
Mounting Surface
279.4
11.0
1191
46.88
1022 parapet wall. The MT9230 Parapet Mount accommodates products designed for standard
40.25 1-1/2 inch NPT pipe thread.
mm The mount can be fitted on the inside or outside of parapet
88.1
3.47
Mounting Surface
walls and can be swiveled
inches 360º for easy set up and servicing. Also available is the
8x O 10 MT9230RA Roof Mount which enables the parapet to be mounted on a flat surface.
mm
inches
0.41
This parapet mount can be custom made to a specified length. Call Linear for more details.
114.3 Typ.
4.5
976
38.43
228.6
9.0
279.4
11.0
1022
40.25
88.1
3.47
mm
inches
Sp
e c i f i c a t i ons
Me
chanical
Maximum Load: 64 lb (29 kg)
Load center of gravity located in line with load attachment point.
Load attachment point uses 1-1/2 NPT (Pipe thread).
Mounting Hardware: Not furnished
Finish: White
Construction: Aluminum
Dimensions: See Dimensional Outline.
Weight: 17 lb (7.7 kg).
MT9230 - Dimensional Drawing
REFERENCE: 2-1/2" O.D. X 3/16" WALL
END CAP
HOLE TAPPED FOR 1/4 - 20 THREADED EYE BOLT (FOR GUY WIRES)
6.00
[152.4 ]
1/4 - 20 x 5/16
PAN HEAD SCREW
STAINLESS STEEL
(1 INCLUDED)
1-1/2 NPT
2.75
[ 69.9 ]
PIPE ARM
46.88
[1190.6 ]
40.88
[1038.2 ]
MOUNTING BRACKET
3/8 -18 x 3/4 HEX HEAD BOLT
STAINLESS STEEL (3 INCLUDED)
4.00
[101.6 ] TYPICAL
22.89
[581.4 ]
20.92
[ 531.2 ]
13.63
[ 346.1 ]
8x Ø .41
[10.3]
9.00
[228.6 ]
11.00
[ 279.4 ]
2.980
[ 75.69 ]
38.43
[ 976.1]
MOUNTING SURFACE
1.19
[ 30.2 ]
CABLE CLEARANCE
USING ROOF MOUNT.
40.25
[1022.4 ]
3.56
[ 90.4 ]
in
[mm]
MT9230RA - Roof Mount (Optional)
0.25
6.35 Typ.
Ø0.41
10.4
0.63
16.0Typ.
4.37
10.0
111Typ. 254
Square
0.63
16.0Typ.
11.0
279.4
Hole pattern to match that
of Wall Mount, MT9230
14.88
378
0.25
6.35
Ac
in
mm
c e ss o r i e s
R oof M ounts :
For mounting unit in an upright position on a flat surface.
MT9230RA Aluminum Roof Mount Adapter
Now Part of
1950 Camino Vida Roble, Suite 150
Carlsbad, CA 92008
Tel: 760.438.7000 800.421.1587
www.aigismech.com • www.linearcorp.com
Copyright © 2011 Linear LLC
231463 A