TIP-ON for doors and stay lifts
Easy opening with integrated door gap adjustment
www.blum.com
2
Contents
6
Programme
10
Applications for doors
12
Applications for stay lifts
14
Manufacturing support
18
Universal programme
20
Ordering and planning information
24
Assembly and adjustment
26
Blum
3
Functional opening comfort
Handle-less fronts are playing an ever increasing role in modern furniture
design. Handle-less furniture opens with a gentle push on the front with the
TIP-ON mechanical opening support system by Blum. To close, simply press
shut. TIP-ON can be combined with the proven unsprung CLIP top hinge to
deliver top quality motion for doors. Additionally TIP-ON supports
handle-less designs incorporating AVENTOS stay lift systems.
4
TIP-ON for doors
When combined with
the tried-and-tested
unsprung CLIP top
hinge, TIP-ON opening
support provides
functional opening
comfort and freedom of
motion for doors in base
and wall cabinets.
TIP-ON for stay lifts
The AVENTOS HK series:
AVENTOS HK, AVENTOS
HK-S and AVENTOS
HK-XS are compatible
with TIP-ON mechanical
support system allowing
for freedom of design in
wall cabinets. AVENTOS
lifts offer an ergonomic
wall cabinet solution
with easy access to
cabinet interiors and
unhindered movement.
5
New programme
You will always find the right TIP-ON unit for doors and AVENTOS stay lifts
thanks to the choice of colours and programme of corresponding adapter
plates. You can opt between the short and long version of TIP-ON, for
drilling or with an adapter plate depending on the application. The door gap
adjustment feature is integrated in all models. The fitting merges beautifully
with the cabinet interior, offering freedom of design and top quality motion.
6
Tool-free door gap
adjustment
The adjustment feature
(+4/-1mm) has been
integrated into all TIP-ON
units for optimal ease.
To adjust the gap, simply
turn the ejector pin. The
+4/–1 mm
click-stop positions
allow you to easily find
the right setting. For
user confidence, the
ejector pin cannot be
unscrewed.
Revised adapter plate
programme
Both the short and long
version of TIP-ON can
be combined with a
complementary inline
adapter plate. The
rectangular and
straight-cut plate
ensures a sleek and
discreet look. When
combined with the
adapter plate, the door
gap can be adjusted to a
minimum of 1.5mm.
Harmonious
integration
TIP-ON can be
integrated beautifully
with cabinet interiors.
The fitting comes in two
colours, Silk white and
Terra black, giving you
great freedom of design.
7
Freedom of design and motion
Handle-less designs in kitchen, living, dining, bedroom and bathroom
applications incorporating doors and lifts open and close with ease with
TIP-ON. Products which are easy to open support daily workflows ensuring
problem free use for the lifetime of the furniture.
Blum's ideas for
practical kitchens
A kitchen has to be fit for
everyday use. That's why
Blum has been researching
the requirements of kitchen
users for years. In this way,
new ideas for making modern
kitchens even more practical
are constantly being generated
as part of DYNAMIC SPACE.
More information can be found
at www.blum.com
8
Easy opening
A gentle push on the
front releases the door
or lift system so you
can open handle-less
furniture with ease.
Comfort and freedom of
motion is unrestricted
thanks to TIP-ON
opening doors and lifts
at a convenient angle.
Quiet closing
TIP-ON ensures the
closing of furniture
is quiet thanks to the
housing of the unit;
allowing the catch plate
to hit the housing when
doors and lifts are
pushed closed,
rather than hitting
the magnet itself.
Secure closing
A latch function secures
the door or lift after
being gently pushed
closed. The TIP-ON
magnet ensures the
front remains
securely closed.
9
Applications for doors
The revised TIP-ON programme offers you even more design options for
handle-less doors throughout the home. All components harmonise beautifully
within cabinet interiors with TIP-ON. No matter whether TIP-ON for drilling or
TIP-ON with an adapter plate, the fitting delivers the top quality motion
you can rely on.
Standard door applications
Cabinet solution applications
Special applications
TIP-ON can be combined with
TIP-ON is compatible with the
Handle-less designs can be
the 120˚ and 100˚ CLIP top
155˚ unsprung zero-protrusion
accommodated throughout the
unsprung hinges to deliver
hinge. This hinge is ideally
home when combining profile
top quality motion for doors in
suited to support Blum’s SPACE
door and angled hinges with
standard applications.
TOWER cabinet solution for the
TIP-ON. TIP-ON is especially
pantry; ensuring doors open
practical where access to
with a gentle push right out of
power is not available such
the way of the inner drawers and
as in bathroom applications.
pull-outs.
10
Optimal opening support is
achieved when the TIP-ON unit
is attached exactly where the
handle would be. This can be
either installed by drilling into
the cabinet edge or attaching
an adapter plate to the inside
of the cabinet.
11
Applications for stay lifts
AVENTOS HK series stay lift applications are the perfect solution for wall cabinets
of small to medium height in high cabinet applications. The stay lift front kicks
outwards; requiring minimal or even no space above the cabinet, allowing for a
host of design possibilities. More design options can be achieved for handle-less
applications thanks to the revised TIP-ON programme. TIP-ON mechanical support
makes opening AVENTOS stay lifts easy and convenient. Lift system fronts stop at
every desired position to ensure they always remain within easy reach.
AVENTOS HK series
applications are all
compatible with
TIP-ON mechanical
opening support.
AVENTOS HK
AVENTOS HK-S
AVENTOS HK-XS
12
Stay lift
AVENTOS HK is best
suited to wall cabinets
of small to medium
height in applications
throughout all living
areas such as the
home office.
Small stay lift
AVENTOS HK-S is
the perfect choice for
wall cabinets of small
height in high cabinet
applications such as
over the fridge, pantry
or oven.
Compact stay lift
Combining AVENTOS
HK-XS with TIP-ON
makes handle-less
designs in wall cabinets
of small height and low
internal depths possible
such as in bathroom
cabinets.
13
Manufacturing support
TIP-ON offers you sophisticated technology and easy adjustment with the
door gap adjustment feature integrated in the fitting. Special manufacturing
templates by Blum are available to facilitate ease of installation and to ensure
TIP-ON functions perfectly.
14
Easy assembly
Optimal protection
The drilling template for TIP-ON helps
The fully enclosed TIP-ON housing
you drill the horizontal fixing positions of
ensures perfect installation and protects
TIP-ON for doors and stay lifts.
the technology on the inside of the
TIP-ON unit.
Precise transfer of measurements
Versatile assembly
The mounting position is indicated on the
The adapter plates can be fixed with
lower part of the adapter plate. Alternatively
chipboard screws or system screws -
use the template for precise positioning.
the choice is yours.
Secure closing
Integrated door gap adjustment
The catch plate completes the TIP-ON
function. There are two versions: a glueon version or one that screws to the front.
The TIP-ON magnet ensures the front
stays securely closed. Blum recommend
the use of the screw-on catch plate.
The arrow markings tell you in which
direction to turn the ejector pin. One
turn (=4 click-stop positions) adjusts the
door gap by 1mm. The ejector pin
cannot be turned beyond the pre-defined
adjustment range.
15
Services for the Manufacturer
Blum would like to make the ordering, assembly and marketing of its products
as easy as possible for our customers and partners. A variety of useful online
applications as well as special planning and ordering software are available to
support your daily activities.
16
Online product configurator
DYNALOG
DYNAPLAN interfaces
The online product configurator
Using the Blum planning software,
Complete plans can be exported
assists with the selection and
cabinet planning for Blum fittings
and imported to or from your
ordering of the correct Blum fittings.
is complete, precise and achieved
CAD or CAM system at the touch
Along with parts lists for your
with ease. The program can be
of a button via interfaces in
desired fitting solution, you
operated intuitively. Automatic
DYNAPLAN.
also get marketing information,
collision checks ensure designs
In this way, DYNAPLAN supports
manufacturing and assembly
are feasible and do away with
your main program with both
documentation as well as 2D/3D
trial applications. DYNALOG
every-day solutions as well as
CAD data.
is available for complimentary
special constructions.
www.blum.com/
download from the Blum website;
onlineproductconfigurator
www.blum.com/services
17
Universal programme
The TIP-ON programme integrates beautifully within cabinet interiors, offering
freedom of design and top quality motion to doors and stay lifts. Units are
available in both short (standard) and long versions to suit every application. All
units, along with their complementing inline adapter plates, are available in Silk
white and Terra black. TIP-ON is quick and easy to install either by drilling into
the cabinet edge or by attaching an adapter plate to the inside of the cabinet.
TIP-ON unit
Long version
Short version
In-line adapter plate
Long version
Short version
Colour variant
Silk white
Terra black
Fittings selection made
easy with the online
product configurator
at www.blum.com/
productconfigurator
Note
TIP-ON is not compatible with BLUMOTION soft-close. When planning with or using TIP-ON for doors and stay lifts remember to select
unsprung CLIP top hinges and/or AVENTOS stay lift mechanisms without integrated soft-close.
18
Unsprung hinges and stay lift
mechanisms for TIP-ON applications
TIP-ON for doors and
stay lifts
Door applications
Unsprung CLIP top hinges
Boss
fixing
Application
120° hinge
‡
100° hinge
155° wide angle hinge
95° profile door hinge
120° aluminium frame door hinge
Overlay
application
INSERTA
70T5590BTL
Screw-on
70T5550.TL
Knock-in
70M2580.TL
INSERTA
70T7540NT1
Screw-on
70T7500NTL
INSERTA
70T9550.TL
Screw-on
70T9550.TL
Screw-on
72T550A.TL
Angled
‡
78A9658.T
Screw-on
Angled hinge
+45°I
Stay lift applications
AVENTOS Lift mechanisms
Application
Aventos HK
Aventos HK-S
Aventos HK-XS
Power Factor
Opening Angle
480–1500
107°
20K2300T
750–2500
107°
20K2500T
1500–4900
107°
20K2700T
3200-9000
100°
20K2900T
220-500
107°
20K2B00T
400-1000
107°
20K2C00T
960-2215
107°
20K2E00T
180-800
105°
20K1101T
500-1200
105°
20K1301T
800-1600
105°
20K1501T
Note
For full technical and order specification information refer to the AVENTOS brochure or Blum trade catalogue.
19
Ordering information
TIP-ON for doors and
stay lifts
Product
Order specification
Short version with magnet
Colour variants
TS
SW
956.1004
For overlay doors up to approx. 1300mm in height. For unsprung hinges Rec. for AVENTOS HK-XS.
For drilling Ø10x50mm. Short version, length 50mm incl. 1 x glue-on and 1 x screw-on catch plates.
Long version with magnet
Colour variants
TS
SW
956A1004
For overlay doors starting from approx. 1300mm in height. For unsprung hinges. For drilling Ø10x76mm. Long version, length 76mm incl. 1
x glue-on and 1 x screw-on catch plates.
Inline adapter plate – short version – 20/17
Colour variants
TS
SW
956.1201
Assembly using chipboard screws Ø3.5mm or Ø4mm or with system screws.
For use in combination with TIP-ON short version.
Inline adapter plate – long version – 20/32
Colour variants
TS
SW
956A1201
Assembly using chipboard screws Ø3.5mm or Ø4mm or with system screws.
For use in combination with TIP-ON long version.
Colour variant abbreviations
SW silk white
TS terra black
20
Planning information
TIP-ON for doors
14.5
Planning
Short version adapter plate
14.5
Short version for drilling
17
17
20
20
* min. 2.6 mm with glue-on catch plate
14.5
* min. 3.1 mm with screw-on catch plate
Long version adapter plate
14.5
Long version for drilling
32
32
20
20
* min. 2.6 mm with glue-on catch plate
* min. 3.1 mm with screw-on catch plate
Screw-on/Glue-on catch plate for drilling
Screw-on/Glue-on catch plate with adapter plate
* For screw-on catch plates
we recommend offsetting the
positioning of TIP-ON by 3mm.
For hard surfaces Ø 2.5 mm
pre-drilling and countersinking
if required.
*F
or screw-on catch plates
we recommend offsetting the
positioning of TIP-ON by 3mm.
For hard surfaces Ø 2.5 mm
pre-drilling and countersinking
if required.
The surface of the front must be
clean, oil-free and dry
FA front overlay
The surface of the front must be
clean, oil-free and dry
FA front overlay
Note
Blum recommend the use of the screw-on catch plate for optimal performance.
21
TIP-ON for stay lifts
Planning information
14.5
Planning
Short version adapter plate
14.5
Short version for drilling
17
17
20
20
14.5
* min. 3.1 mm with screw-on catch plate
Long version adapter plate
14.5
Long version for drilling
32
32
20
* min. 3.1 mm with screw-on catch plate
Screw-on catch plate for drilling
Screw-on catch plate with adapter plate
3*
8
FAu
* For screw-on catch plates we recommend offsetting the
positioning of TIP-ON by 3mm. For hard surfaces Ø 2.5 mm
pre-drilling and counter-sinking if required.
FAu Lower front overlay
* For screw-on catch plates we recommend offsetting the
positioning of TIP-ON by 3mm. For hard surfaces Ø 2.5 mm
pre-drilling and counter-sinking if required.
FAu Lower front overlay
Note
All TIP-ON units are supplied with both screw-on and glue-on catch plates.
The glue-on catch plate should not be used in combination with TIP-ON for AVENTOS stay lifts.
22
20
Assembly devices
TIP-ON for doors and
stay lifts
Drilling template
Drilling template for BLUMOTION/TIP-ON
Template for drilling the front face fixing positions for TIP-ON for doors and stay
65.5010
lifts as well as for BLUMOTION for doors handle side and hinge side.
Ensures ease of assembly on a marking line.
Suitable for CLIP top hinges and AVENTOS stay lifts.
Components
1 x drilling template for BLUMOTION/TIP-ON, 1 x drilling depth spacer (ø 10mm)
Drilling template (adapter plate)
Template
Template for drilling the fixing positions for mounting plates (ø 2.5mm).
65.5300
Facilitates pre-drilling of the fixing positions for adapter plates (BLUMOTION/
TIP-ON for doors and stay lifts).
Ensures ease of assembly on a marking line.
Suitable for CLIP top hinges and AVENTOS stay lifts.
23
Assembly and adjustment
TIP-ON for doors
Assembly
Assembly position
Optimal opening support is achieved if the
TIP-ON unit is attached exactly where the
handle would be.
The fixing position can deviate ± 300 mm in
height and up to a quarter of the cabinet width
in terms of width.
Short/long version for drilling
Assembly
Glue-on catch plate
Screw-on catch plate
Inline adapter plates
Assembly
Adjustment
TIP-ON adjustment
24
Glue-on catch plate
Screw-on catch plate
Assembly and adjustment
TIP-ON for stay lifts
Assembly
Assembly position
Optimal opening support is achieved if the
TIP-ON unit is attached exactly where the
handle would be.
TIP-ON assembly for AVENTOS stay lifts
is carried out in the centre of the cabinet
bottom panel.
Short/long version for drilling
Assembly
Screw-on catch plate
Inline adapter plates
Assembly
Screw-on catch plate
Adjustment
TIP-ON adjustment
25
Blum
Founded over 60 years ago by Julius Blum, today Blum is an internationally
active family-owned company. Blum is trusted and renowned worldwide for
designing a comprehensive range of high quality industry leading products
that significantly enhance user convenience and ergonomics in the kitchen
and throughout the home. That’s why we make every effort to perfect the
motion of our lift, hinge, box and runner systems.
26
Design is more than an attractive appearance
Quality for the lifetime of the furniture
Form, function and the focus on perfecting motion
For over 60 years, quality has been the highest principle
are and have always been firmly interlinked at
for the development and manufacture of Blum products.
Blum. This means that Blum products turn the
Our fittings exemplify quality with their
use of high-quality furniture into a true experience
well-thought-out function and durability, engineered to
and offer the ideal fitting solution for every home.
provide problem free use for the lifetime of the furniture.
Blum incorporates current design trends, personal
We achieve this by using the strictest internal guidelines
preferences and functional furniture use. Blum fittings
and rigorous testing that form the basis of our ISO9001
are internationally recognised for their sophisticated
Quality Management System.
design and functional excellence.
Innovation for high living comfort
Our contribution to the environment
We want our fitting solutions to be innovative and
Blum strives to minimise its environmental impact
make everyday kitchen use easier. That’s why
with environmental protection being an integral
our developments are based on findings from
part of everything we do. We use environmentally
requirements research and input from our customers.
friendly processes, use raw materials intelligently and
Blum is one of the largest patent applicants in Austria
save energy wherever we can. Our commitment to
and has more than 1,000 registered trademarks.
environmental protection is internationally recognised
CLIP, tool free assembly, TANDEM technology,
and rewarded. We endeavour to maintain and
MOVENTO technology, soft-close BLUMOTION and
are always looking to improve our environmental
SERVO-DRIVE electrical motion support system are
management systems.
all innovations by Blum and milestones in the furniture
manufacturing industry.
27
Alle Inhalte unterliegen
All content
dem
is copyrighted
Copyright von
by Blum.
Subject to Technische
technical modifications
Änderungenand
undchanges
Programmänderungen
to the range without
vorbehalten.
notice.
Printed
Printed
Printed
Printedin
in
in
inAustria
Austria
Austria
Austria····IDNR:
IDNR:
IDNR:
IDNR:000.000.0
000.000.0
253.343.5
912.932.4
000.000.0····EP-246/1
EP-246/1
EP-246/1
EP-246/1EN-SG/08.14-1
EN-VN/08.14-1
EN-TH/08.14-1
DE-AL/08.14-1
EN-IN/08.14-1
Blum Showrooms
Sydney (Head Office)
10 Blackbird Close
Len Waters Estate NSW 2170
Ph: 02 9612 5400
Adelaide
179 Railway Terrace
Mile End SA 5031
Ph: 08 8118 6070
Brisbane
6/39-45 Compton Road
Underwood QLD 4119
Ph: 07 3135 9490
Hafele India Pvt. Ltd.
Office No. 3, Building „A”, BETA
I Think Techno Campus
Off J.V.L.R, Opp Kanjurmarg Station
Kanjurmarg East, Mumbai 400 042
India
Melbourne
245 Ferntree Gully Road
Mount Waverley VIC 3149
Ph: 03 9982 1720
Perth
3/50 Howe Sreet
Osborne Park WA 6916
Ph: 08 6467 0110
Customer Care (toll free)
Tel.: 1800 266 6667
Tel.: +91 22 6142 6100
Fax: +91 22 6695 0922
E-mail: info@hafeleindia.com
Julius Blum GmbH
Liaison
Office India
Blue
International
Co.,Ltd.
OfficeSouth
No.
Building
8,10,12
Soi 3,
Ramkhamhaeng
26/1
Blum
East
Asia „A” BETA
I Think
Techno
Campus
Ramkhamhaeng
Pte.
Ltd.;
150 Ubi
Avenue 4
Off J.V.L.R,
Kanjurmarg
Station
Rd.,
Huamark,
Bangkapi
#02-00
Ubi Opp
Biz-Hub
Blum
Vietnam
Co.
Ltd
Kanjurmarg
East,
Mumbai 400 042
BANGKOK
10240
Singapore
408825
3 Vo Van Tan
Street
India
THAILAND
Rep.
of 3
Singapore
District
Tel.:
+91
Tel:
+66
22267109252
7755
+65
6374
547
1760
Ho Chi
Minh
City
+91
Fax:
+66
26599
374
9176
Fax.:
+652267109252
547993
1761
Tel.: 1800
E-mail: info.in@blum.com
E-Mail:
info@blue-inter.com
info.sg@blum.com
info.bvn@blum.com
www.blum.com
Julius Blum GmbH
Furniture
Fittings Mfg.
Beschlägefabrik
6973 Höchst, Austria
Tel.: +43 5578 705-0
Fax: +43 5578 705-44
E-mail:
info@blum.com
E-Mail:Place
distributor or company contact details here.
www.blum.com
All content is copyrighted by Blum. Subject to technical modifications and changes to the range without notice. IDNR: 1.001.55
Blum Australia Pty. Ltd.
P.O. Box 1615
Green Valley NSW 2168
Toll Free: 1800 179 186
E-Mail: info.au@blum.com