2

Handle-less furniture is becoming more and more popular - most notably in kitchens and livingroom furniture. With TIP-ON, we offer a mechanical opening support system for handle-less furniture doors.
This enables customers to open and close handle-less furniture doors easily and effortlessly. TIP-ON is suitable for all furniture sectors.
4 Easy opening, closes securely
6 TIP-ON for all living areas
8 Components and assembly
10 Order specification
14 TIP-ON is versatile
15 Perfecting motion
3

4

Handle-less doors can be opened easily with TIP-ON – a light touch is all that's needed.
The door then opens at an angle that is comfortable for the furniture user. In other words: It gives you a good view of the cabinet's interior without limiting the furniture user's freedom of motion.
> TIP-ON – user-friendly and high quality
■
The TIP-ON mechanism remains undamaged when the door is pulled open by hand.
■
The TIP-ON mechanism is made of highquality components and will last for the lifetime of the furniture.
Closing with a magnetic effect
To close the door, it can be lightly pressed shut or closed with a light swing.
The TIP-ON magnet works with a catch plate to ensure secure closing – even when closed with force.
5

With TIP-ON, doors can now be equipped with handle-less fronts. This opens up many new design options.
6

Customer wishes are becoming more and more diverse. Whether it's wood, glass or metal:
TIP-ON can be combined with all materials. Thanks to TIP-ON, handle-less doors can be used throughout the entire living space.
7

3
1a 1b
2
1a
The TIP-ON unit can be attached to the cabinet end panel.
1b
The TIP-ON unit can also be attached to the cabinet interior using adapter plates (horizontal or cruciform versions available).
2
The catch plate is the counterpart to TIP-ON.
It can be supplied in self-adhesive or screw-on versions.
3
Unsprung CLIP top hinges are used for
TIP-ON for doors.
8

The TIP-ON programme offers the right TIP-ON unit for every application.
The standard version is used for overlay doors and the extended version is used for high cabinets and inset doors. Both versions can be drilled into the cabinet end panel or attached using adapter plates:
■
■
■
Drill and insert the TIP-ON unit or attach using an adapter plate
Fix catch plate to the door
Adjust door gap (when assembling with adapter plate)
Optimal opening support is ensured when the TIP-ON unit is attached in the actual handle position. This can deviate + / - 300 mm in the height and up to a quarter of the cabinet width along the horizontal plane.
For the drilling version, a min. door gap of
2.6 mm should be planned when using the selfadhesive catch plate. The screw-on catch plate requires a min. of 3.1 mm.
For adapter plate assembly (horizontal or cruciform adapter plate), the door gap can be adjusted to a min. of 1.5 mm.
Horizontal and cruciform adapter plates can be adjusted using a spiral screw (from + 4,5/– 1,5 mm).
The factory setting of the door gap is 2 mm.

For standard overlay doors*
TIP-ON „Standard“
For drilling Ø 10 x 50 mm
RAL 7037 nylon, dust grey
With magnet
Incl. self-adhesive and screw-on catch plates opening distance approx. 18 mm
* for doors with a height less than approx. 1300 mm
Planning
955.1004
* For the screw-on catch plate we recommend a 3 mm displaced positioning to TIP-ON.
For inset doors and high cabinet doors*
TIP-ON "extended version"
For drilling Ø 10 x 76 mm
RAL 7037 nylon, dust grey
With magnet
Incl. self-adhesive and screw-on catch plates opening distance approx. 38 mm
* for doors higher than approx. 1300 mm and inset doors
Planning
955A1004
Assembly devices
Drilling jig
* For the screw-on catch plate we recommend a 3 mm displaced positioning to TIP-ON.
Drilling jig
For panel drilling TIP-ON
Positioning template for adhesive plate for finding the position of the screw on or adhesive plate
65.5010
65.5210
10 11

For "Standard" and "extended version"
TIP-ON horizontal adapter plate
Screw-on, 20/32
RAL 7036 nylon, platinum grey
Fixing with Ø 3.5 mm or Ø 4 mm chipboard screws
Factory setting: 2 mm door gap
TIP-ON must be ordered separately
Planning
955.1201
TIP-ON cruciform adapter plate
Screw-on, 37/32
RAL 7036 nylon, platinum grey
Fixing with Ø 3.5 mm or Ø 4 mm chipboard screws
Factory setting: 2 mm door gap
TIP-ON must be ordered separately
Planning
Assembly devices
Template
To pre-drill fixing positions of adapter plates.
11
955.1501
65.5300

Application
Standard door
Boss Fixing
Screw-on
Knock-in
Screw-on
INSERTA
Screw-on
INSERTA
Screw-on
Screw-on
Screw-on
Screw-on
Knock-in
EXPANDO
INSERTA
Screw-on
INSERTA
Screw-on
INSERTA
Screw-on
Screw-on
Screw-on
Screw-on
Screw-on
Screw-on
Screw-on
Screw-on
Screw-on
Screw-on
Screw-on
Screw-on
Standard door (120° special)
Standard door
Standard door
Standard door
0-protrusion hinge
Profile/thick door
Blind corner
Aluminium frame door
Aluminium frame door
CRISTALLO
Angled hinge
+45°I
Angled hinge
+45°II
Angled hinge
+45°III
Angled hinge
+30°II
Angled hinge
+30°III
Angled hinge
+20°II
Angled hinge
+15°III
Angled hinge
-15°III
Angled hinge
-30°III
Angled hinge
-45°III
Overlay application
70T5550.TL
70T5580.TL
70T558E.TL
70T5590BTL
72T5550.TL
72T5590BTL
74T1550.TL
74T1590BTL
70M2550.TL
70M2580.TL
70T6550
70T6540B
70T7500BTL
70T7540BTL
70T9550.TL
Centre application
70T5650.TL
Inset application
70T5690BTL
74T1650.TL
74T1690BTL
70M2650.TL
70M2680.TL
70T6650
70T6640B
70T9650.TL
74T1750.TL
74T1790BTL
70M2750.TL
70M2780.TL
70T9750.TL
Blind corner
78T9550.TL
70T950A.TL
72T550A.TL
Angle
78C450BT
78A9658.T
78T5550
78A9458.T
78A9556.T
78A9456.T
78A9555.T
78A9454.T
78A5453.T
78A5451.T
78A5450.T
12

TIP-ON "Standard" and "extended version" for drilling
* For the screw-on catch plate we recommend a 3 mm displaced positioning to TIP-ON.
For hard surfaces resp. MDF predrill Ø 2.5 mm or countersink if necessary.
The surface of the front must be clean, oil-free and dry.
FA = front overlay
* min. 2.6 mm with self-adhesive catch plate
* min. 3.1 mm with screw-on catch plate
TIP-ON horizontal adapter plate (20/32)
*Factory setting = 2 mm
TIP-ON cruciform adapter plate (37/32)
*Factory setting = 2 mm
* For the screw-on catch plate we recommend a 3 mm displaced positioning to TIP-ON.
For hard surfaces resp. MDF predrill Ø 2.5 mm or countersink if necessary.
The surface of the front must be clean, oil-free and dry.
FA = front overlay
13
* For the screw-on catch plate we recommend a 3 mm displaced positioning to TIP-ON.
For hard surfaces resp. MDF predrill Ø 2.5 mm or countersink if necessary.
The surface of the front must be clean, oil-free and dry.
FA = front overlay

TIP-ON solutions are also available for drawers and pull-outs.
14

Blum turns the opening and closing of furniture into an experience that significantly increases the comfort of motion in the kitchen. Several thousand employees are continually working worldwide implementing our concept of perfect motion.
Within this process, we place the needs of the kitchen user as the focus of our actions. We are only satisfied when the kitchen user is satisfied. All of our partners who participate in the furniture making process profit from this focus.
For over 50 years, quality has been the highest principle for the development and manufacture of our products.
Our fittings systems shout "high quality" with their well-thought-out function, recognised design and high durability.
They are designed to inspire and trigger fascination for perfect motion. We also set the bar very high for the services we offer. They must provide the best possible support to our partners.
So that we can target our efforts at all levels, we are in a constant dialogue with kitchen users and regularly exchange information with furniture manufacturers, joiners and distributors.
15

16
Blum U.K. Ltd.
Mandeville Drive
Kingston, Milton Keynes
GB-Buckinghamshire MK10 0AW
Tel.: 019 08 285700
Fax: 019 08 285701
E-mail: info.uk@blum.com
Julius Blum GmbH
Furniture Fittings Mfg.
6973 Höchst, Austria
Tel.: +43 5578 705-0
Fax: +43 5578 705-44
E-mail: info@blum.com
www.blum.com