Electro-Mechanical Switches

advertisement
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
microwave-east
an
company
199
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
RF Switching
Products
Power Monitors
and Sensors
Table of Contents
Electro-Mechanical Switches...............................................................201
SEM - Stocked Electro-Mechanical Switches ........................................204
SP2T..............................................................................................................206
SP3T..............................................................................................................213
SP4T..............................................................................................................216
SP5T..............................................................................................................218
SP6T..............................................................................................................219
Transfer........................................................................................................223
Commercial Use ......................................................................................226
Standard Custom Switches .........................................................................230
Quick Reference Guide .........................................................................236
Selecting an SP2T Switch .....................................................................237
Selecting a Multiposition Switch .......................................................250
Selecting a Transfer Switch...................................................................280
Solid State PIN Contol Products........................................................289
Application Note ............................................................................................291
Quick Reference Guide .................................................................................290
Super Slim High Performance Drop-In PIN Switches (SS) ................303
High Performance PIN Switches (SP) .......................................................311
Value Series PIN Switches ............................................................................317
High Performance Miniature Switches....................................................321
3 Watt PIN Switches........................................................................................326
Low Frequency Switches..............................................................................329
High Power Switches ....................................................................................330
Custom Multi-Throw Absorptive PIN Diode Switches .......................333
High Speed Switched-Bit Attenuators ....................................................336
Switched Filter Banks.....................................................................................343
Limiters ...............................................................................................................345
200
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Electro-Mechanical Switches
microwave-east
an
company
201
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
RF Switching
Products
Power Monitors
and Sensors
Electro-Mechanical Switches
Electro-Mechanical Switches
Narda offers a complete line of RF/microwave electromechanical switches: stocked SEMs, standard custom
part, and one of a kind custom.
All Narda switches offer exceptional reliability and performance. A unique actuator design enables Narda to
guarantee operation of one million to two million cycles
per switch position without noticeable performance
degradation. This means:
No intermittent contacts in RF or indicator circuits
Operating reliability is complemented by RF specifications that equal or exceed industry standards.
The unique design of the coil and solenoid allows the
solenoid to be actuated more than one million cycles.
These switches can also include a self-termination technique that does not require a separate RF cavity. All
switches are designed to meet MIL-S-3928 and are fully
compatible with both military and commercial logic
integrated circuits.
202
microwave-east
an
company
After assembly, switches are tested for VSWR, insertion
loss, and isolation. Individual switches are then cycled
in each position in accordance with Narda’s comprehensive test procedures to assure trouble-free operation.
Before shipping, final testing is performed. In addition
to electrical and mechanical testing, the switches are
tested at greater than 10 megohms, 500 volts for DC
resistance between the switch body, the terminal, and
indicator circuitry.
Narda electro-mechanical switches are available in
single pole double throw (SP2T) through single pole
twelve throw (SP12T), as well as transfer switch configurations. Standard options include four activation
modes, 50 ohm terminations, and TTL logic circuits.
SEM models have either SMA or Type N connectors,
indicator circuitry, solder-control terminals, 12, 24 or 28
Vdc actuating voltage, and a typical switching speed of
15 ms. TTL models include suppression diodes. Polarity
is common positive for all pulse-latching models.
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Electro-Mechanical Switches
Custom part switches and one-of-a-kind switches
designed and manufactured to your specific requirements benefit from the same rigorous standards and
environment maintained for our SEM switch line.
SEMs - Standard, Stocked Switches
Narda has brought its most popular custom switches
into the mainstream by making them standard, stocked
catalog products that are always available when you
need them. These Stocked Electro-Mechanical switches
– or SEM switches – are the definitive answer to most
switch requirements.
With nearly forty distinct models, Narda’s SEM switches
address applications in many industries: ATE, satellite
communications, wireless communications, avionics,
and military (Radar/EW/communications and commercial test equipment).
Standard, Custom Switches
Narda custom switches range from single pole, double
throw configurations (SP2T) to single pole, twelve throw
(SP12T) units, plus transfer switches.
Options include four different activation modes, all
popular RF connector types, all common operating
voltages, frequencies up to 26.5 GHz, and such special
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
options as built-in 50-ohm terminations, self de-energizing circuits, indicator circuits, TTL logic circuits,
MOSFET drivers and BCD decoders.
With this wide assortment of options, almost all
requirements can be satisfied without resorting to the
development of one-of-a-kind switches. If you have
unique specifications, however, Narda is ready to design
a switch that will precisely meet each of your parameters.
Extensive implementation of manufacturing and quality
procedures, along with shop flow travelers, ensure that
each step of the manufacturing process is completed
correctly. Registration to ISO9001: 2008 reflects our commitment to serving customers throughout the world.
Assemblies
In many instances, it may be advantageous to have
Narda incorporate a specified switch into a Narda
designed assembly of high performance products, such
as filters, amplifiers, power dividers, and couplers.
Like Narda switches, these assemblies will satisfy your
most rigid performance requirements and will be manufactured, assembled, inspected and tested under the
guidance and regulation of a quality assurance organization without industry equal.
TEL: +1 631 231-1700
microwave-east
an
company
203
Integrated Microwave
Assemblies (IMAs)
Introduction
Passive
Components
Power Monitors
and Sensors
RF Switching
Products
Stocked Electro-Mechanical Switches
Quick Reference Guide – SEM Series Index
FREQUENCY
CONNECTOR
RANGE (GHz)
ACTUATION
SELF
TERMINATION INDICATOR SUPPRESSION TTL
DE-ENERGIZING
50 ohms CIRCUITRY
DIODES
LOGIC
CIRCUIT
SEM
TYPE
020
SP2T
DC TO 18
SMA
FAILSAFE, 28V
206
020-12
SP2T
DC TO 18
SMA
FAILSAFE, 12V
206
020-24
SP2T
DC TO 18
SMA
FAILSAFE, 24V
206
020L
SP2T
DC TO 18
SMA
LATCHING, 28V
123
SP2T
DC TO 18
SMA
FAILSAFE, 28V
123D
SP2T
DC TO 18
SMA
FAILSAFE, 28V
123T
SP2T
DC TO 18
SMA
FAILSAFE, 28V
123L
SP2T
DC TO 18
SMA
LATCHING, 28V
123LT
SP2T
DC TO 18
SMA
LATCHING, 28V
PAGE
206
206
✔
✔
✔
✔
✔
206
✔
206
✔
✔
✔
206
✔
✔
206
123LD
SP2T
DC TO 18
SMA
LATCHING, 28V
✔
✔
✔
207
123DT
SP2T
DC TO 18
SMA
FAILSAFE, 28V
✔
✔
✔
✔
207
123LDT
SP2T
DC TO 18
SMA
LATCHING, 28V
✔
✔
✔
✔
✔
207
123LDT-24
SP2T
DC TO 18
SMA
LATCHING, 24V
✔
✔
✔
✔
✔
207
✔
✔
123N
SP2T
DC TO 12.4
N
FAILSAFE, 28V
✔
123DN
SP2T
DC TO 12.4
N
FAILSAFE, 28V
✔
124
SP2T
DC TO 26.5
SMA
FAILSAFE, 28V
✔
207
133
SP3T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
213
207
207
133D
SP3T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
✔
✔
213
133DT
SP3T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
✔
✔
✔
213
133LT
SP3T
DC TO 18
SMA
LATCHING, 28V
✔
✔
213
133T
SP3T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
✔
213
143
SP4T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
143D
SP4T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
✔
✔
216
216
143DT
SP4T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
✔
✔
✔
216
143DT-24
SP4T
DC TO 18
SMA
NORMALLY OPEN, 24V
✔
✔
✔
✔
216
143T
SP4T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
✔
216
153
SP5T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
218
066
SP6T
DC TO 18
SMA
NORMALLY OPEN, 28V
163
SP6T
DC TO 18
SMA
NORMALLY OPEN, 28V
219
219
✔
163D
SP6T
DC TO 18
SMA
NORMALLY OPEN, 28V
163DT
SP6T
DC TO 18
SMA
NORMALLY OPEN, 28V
163LD
SP6T
DC TO 18
SMA
LATCHING, 28V
163LDT-24
SP6T
DC TO 18
SMA
LATCHING, 24V
✔
✔
✔
✔
✔
✔
219
✔
✔
✔
219
✔
✔
✔
✔
219
✔
✔
✔
✔
219
163T
SP6T
DC TO 18
SMA
NORMALLY OPEN, 28V
✔
219
XSEM323
TRANSFER
DC TO 18
SMA
FAILSAFE, 28V
✔
223
XSEM323D
TRANSFER
DC TO 18
SMA
FAILSAFE, 28V
✔
XSEM323L
TRANSFER
DC TO 18
SMA
LATCHING, 28V
✔
XSEM323LD
TRANSFER
DC TO 18
SMA
LATCHING, 28V
✔
✔
✔
223
XSEM323LD-24
TRANSFER
DC TO 18
SMA
LATCHING, 24V
✔
✔
✔
223
204
microwave-east
an
company
www.nardamicrowave.com
✔
✔
223
223
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
Passive
Components
RF Switching
Products
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
Quick Reference Guide – Commercial Use Index
MODEL
TYPE
FREQUENCY
RANGE (GHz)
CONNECTOR
PAGE
MS-SMA-020
SP2T
DC TO 3
SMA
226
MS-SMA-020-12
SP2T
DC TO 3
SMA
226
MS-SMA-020L
SP2T
DC TO 3
SMA
226
MS-N-023
SP2T
DC TO 3
N
226
MS-SMA-223
DP2T
DC TO 3
SMA
226
MS-SMA-223L
DP2T
DC TO 3
SMA
226
MS-SMA-033
SP3T
DC TO 3
SMA
226
MS-SMA-063
SP6T
DC TO 3
SMA
226
Glossary
All switches are bi-directional. Inputs and Outputs are
interchangeable.
SP2T – A single pole, double throw switch has one input
port and two selectable output ports.
Multiposition Switch – A multiposition switch has one
input port and more than two selectable output ports.
Unlike some switches, Narda models can be switched
directly to any one of the available output positions
without sequencing through intervening positions.
Transfer Switch – A transfer switch has two independent paths that operate simultaneously in one of two
selected positions.
Failsafe – The switch moves to the closed position when
the actuating voltage is applied and always returns to a
predetermined position when the voltage is removed.
Latching – Also called Pulse Latching, the switch
remains in a preselected position whenever the actuating voltage is removed or interrupted and holds
that preselected position until a voltage is applied to
another position. This configuration must be pulse controlled with a pulse width of 20 ms to 100 ms duration.
Standard polarity is common positive.
Normally Open – All output ports of the switch are disconnected from the input port until a voltage is applied
to a selected position.
Terminated Units – Each unused or open output RF
port is internally terminated in a 50-ohm resistive load
(1W CW max.).
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TTL – Selected position of the switch is controlled by a
TTL Logic High. The switch requires only nominal +28
Vdc (additional 5 Vdc is not required).
TTL Logic Voltage Level:
Low 0 to 0.8 Vdc
High 2.5 to 5.0 Vdc
TTL Logic Input Current:
Low 0 mA
High 1.6 mA max. @ 3.85 Vdc
TTL Units – Transistor-Transistor-Logic circuitry enables
the status of the switch to be controlled by the level of
TTL logic input.
Suppression Diodes – Fast recovery silicon rectifiers (diodes) connected in parallel with the coils of the
switch to suppress any transient voltage that may be
generated by the coils.
Indicator Circuitry – A set of internally mounted contacts that allows external monitoring of switch RF status.
Some switch series include a steering diode drive due
to the electronic indicator.
Solder Terminal – A turret terminal is standard on all
switches.
Self De-energizing Circuitry – With this option, a set
of internally mounted contacts or electronically generated pulses disconnects the driver voltage as soon as
RF contact has been made. This option is only available
with latching type switches. Suppression diodes must
be specified with this option.
Common Specifications
RF Impedance.............................................. 50 ohms nominal
Actuating Voltage................................................. 28 Vdc ± 2 V
Switching Time...................................................... 15 ms (max.)
Switching Sequence................................ Break Before Make
Operating Ambient Temp.............................. -35°C to +70°C
Operating Life.................................1 million cycles/position
Designed to meet MIL-S-3928
TEL: +1 631 231-1700
microwave-east
an
company
205
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
RF Switching
Products
Power Monitors
and Sensors
Stocked Electro-Mechanical Switches
DC-26.5 GHz
SP2T SEM Series
yy Standard Features Include:
Latching Models, Failsafe Models,
TTL Logic Control, Indicator Circuits
Specifications
SP2T, SMA (F), DC to 18 GHz
MODEL
SEM020
SEM020-12
SEM020-24
SEM020L
FEATURES
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FREQUENCY
RANGE
(GHz)
INSERTION
LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
FAILSAFE
160
275 @ 12V
200 @ 24V
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
200
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
160
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
160
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
200
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
280
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
280
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.4
1.2
1.3
1.4
1.4
80
70
60
60
PULSE LATCHING
SEM123
FAILSAFE / INDICATOR CKT
SEM123D
FAILSAFE / INDICATOR CKT / TTL* /
SUPPRESSION DIODE
SEM123L
PULSE LATCHING / INDICATOR CKT
SEM123T
FAILSAFE / INDICATOR CKT /
TERMINATED
SEM123LT
PULSE LATCHING / TERMINATED /
INDICATOR CKT
206
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
SP2T, SMA (F), DC to 18 GHz (con’t)
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FREQUENCY
RANGE
(GHz)
INSERTION
LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
200
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
SEM123DT
FAILSAFE / TERMINATED /
INDICATOR CKT /
SUPPRESSION DIODE / TTL*
280
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
SEM123LDT
SEM123LDT-24
PULSE LATCHING /
INDICATOR CKT / TERMINATED /
TTL* / SELF DE-ENERGIZING
280
325 @ 24V
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.5
0.5
1.2
1.3
1.4
1.5
80
70
60
60
MODEL
FEATURES
SEM123LD
PULSE LATCHING / INDICATOR CKT
/ TTL*
SP2T, Type N (F), DC to 12.4 GHz
MODEL
FEATURES
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FREQUENCY
RANGE
(GHz)
INSERTION
LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
SEM123N
FAILSAFE / INDICATOR CKT
180
DC-3
3-8
8-12.4
0.2
0.35
0.5
1.2
1.35
1.5
80
70
60
SEM123DN
FAILSAFE / INDICATOR CKT / TTL* /
SUPPRESSION DIODE
180
DC-3
3-8
8-12.4
0.2
0.35
0.5
1.2
1.35
1.5
80
70
60
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FREQUENCY
RANGE
(GHz)
INSERTION
LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
160
DC-3
3-8
8-12.4
12.4-18
18-26.5
0.2
0.3
0.4
0.5
0.7
1.2
1.3
1.4
1.5
1.7
80
70
60
60
50
SP2T, SMA (F), DC to 26.5 GHz
MODEL
SEM124
*
FEATURES
FAILSAFE / INDICATOR CKT
APPLIES TO ALL SWITCHES WITH TTL:
1. Selected position of the switch is controlled by TTL Logic
2. Switch requires only nominal +28 Vdc for coils (additional 5 Vdc is not required)
3. TTL LOGIC LEVEL: Low 0 to .8 Vdcx High 2.5 to 5.0 Vdc
4. TTL LOGIC INPUT CURRENT: Low 0 mA High 1.6 mA max @ 3.85 Vdc
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
207
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
Power Monitors
and Sensors
RF Switching
Products
Stocked Electro-Mechanical Switches
Outline Drawings and Schematics
Dimensions in inches, unless otherwise specified.
SCHEMATIC SHOWN IN FAILSAFE POSITION
SEM020, SEM020-12, SEM020-24
1
COM+
PWR INPUT
2
1
IN
2
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SEM020L
208
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
Passive
Components
RF Switching
Products
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
SCHEMATIC SHOWN IN FAILSAFE POSITION
SEM123
SCHEMATIC SHOWN IN FAILSAFE POSITION
SEM123D
1
2
COM+V∞ 1
2
COM
1.340
1
COM
.13
.670
.440
IND CIRCUITRY
2
1
COM+
NAMEPLATE
1.50
1
IN
.075
.440
.25 MAX
.093
.093 DIA.
2 PL
THRU
.170
PWR INPUT
2
2
.120 DIA.
2 PL
THRU
CONNECTOR, SMA (FEMALE)
PER MIL-C-39012
3 PL
.250
www.nardamicrowave.com
IN
2
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
.375
.880
1.190
1
SEM123L
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
209
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
Power Monitors
and Sensors
RF Switching
Products
Stocked Electro-Mechanical Switches
Outline Drawings and Schematics
Dimensions in inches, unless otherwise specified.
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SEM123T
1
COM
2
1
COM+
IND CIRCUITRY
PWR INPUT
2
50
50
1
IN
2
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SEM123LT
RTN
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SEM123LD
210
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
Passive
Components
RF Switching
Products
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
1
IND CIRCUITRY
COM
2
+V
PWR INPUT
LOGIC
RTN
50
LOGIC INPUT
2
50
1
IN
2
SCHEMATIC SHOWN IN FAILSAFE POSITION
SCHEMATIC SHOWN IN FAILSAFE POSITION
SEM123DT
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SEM123LDT and SEM123LDT-24
1
5
COM
2
INDICATOR
CIRCUITRY
1+
PWR INPUT
2
1
IN
2
SCHEMATIC SHOWN IN FAILSAFE POSITION
SEM123N
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
211
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
Power Monitors
and Sensors
RF Switching
Products
Stocked Electro-Mechanical Switches
Outline Drawings and Schematics
Dimensions in inches, unless otherwise specified.
1
COM
2
INDICATOR
CIRCUITRY
LOGIC
+28VDC
1
IN
RTN
2
PWR INPUT
2
SCHEMATIC SHOWN IN FAILSAFE POSITION
SCHEMATIC SHOWN IN FAILSAFE POSITION
SEM123DN
SCHEMATIC SHOWN IN FAILSAFE POSITION
SEM124
212
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
DC-18 GHz
SP3T SEM Series
yy Standard Features Include:
Normally Open and Latching Models
TTL Logic Control, Suppression Diodes
yy All Models Supplied with
Indicator Circuits
Specifications
SP3T, SMA (F), DC to 18 GHz
MODEL
*
FEATURES
SEM133
NORMALLY OPEN / INDICATOR CKT
SEM133D
NORMALLY OPEN / TTL* /
SUPPRESSION DIODE /
INDICATOR CKT
SEM133T
NORMALLY OPEN / TERMINATED /
INDICATOR CKT
SEM133DT
NORMALLY OPEN / TERMINATED /
TTL* / SUPPRESSION DIODE /
INDICATOR CKT
SEM133LT
PULSE LATCHING / TERMINATED /
INDICATOR CKT
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FREQUENCY
RANGE
(GHz)
INSERTION
LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
180
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
300
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
APPLIES TO ALL SWITCHES WITH TTL:
1. Selected position of the switch is controlled by TTL Logic
2. Switch requires only nominal +28 Vdc for coils (additional 5 Vdc is not required)
3. TTL LOGIC LEVEL: Low 0 to .8 Vdc High 2.5 to 5.0 Vdc
4. TTL LOGIC INPUT CURRENT: Low 0 mA High 1.6 mA max @ 3.85 Vdc
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
213
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
RF Switching
Products
Power Monitors
and Sensors
Stocked Electro-Mechanical Switches
Outline Drawings and Schematics
Dimensions in inches, unless otherwise specified.
SCHEMATIC SHOWN IN NORMALLY OPEN POSITION
SEM133
SEM133D
SCHEMATIC SHOWN IN NORMALLY OPEN POSITION
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SEM133T
214
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
SCHEMATIC SHOWN IN 50 Ω TERMINATED POSITION
SEM133DT
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
SEM133LT
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
215
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
RF Switching
Products
Power Monitors
and Sensors
Stocked Electro-Mechanical Switches
DC-18 GHz
SP4T SEM Series
yy Standard Features Include:
Normally Open and Latching Models TTL Logic Control, Suppression Diodes, Indicator Circuits
Specifications
SP4T, SMA (F), DC to 18 GHz
MODEL
*
FEATURES
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FREQUENCY
RANGE (GHz)
INSERTION
LOSS (dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
SEM143
NORMALLY OPEN / INDICATOR CKT
SEM143D
NORMALLY OPEN / TTL* /
INDICATOR CKT /
SUPPRESSION DIODE
SEM143T
NORMALLY OPEN / TERMINATED /
INDICATOR CKT
140
DC-3
3-8
8-12.4
12.4-18
SEM143DT
SEM143DT-24
NORMALLY OPEN / TERMINATED /
TTL* / SUPPRESSION DIODE /
INDICATOR CKT
140
225 @24V
DC-3
3-8
8-12.4
12.4-18
APPLIES TO ALL SWITCHES WITH TTL:
1. Selected position of the switch is controlled by TTL Logic
2. Switch requires only nominal +28 Vdc for coils (additional 5 Vdc is not required)
3. TTL LOGIC LEVEL: Low 0 to .8 Vdc High 2.5 to 5.0 Vdc
4. TTL LOGIC INPUT CURRENT: Low 0 mA High 1.6 mA max @ 3.85 Vdc
Outline Drawings and Schematics
Dimensions in inches, unless otherwise specified.
SEM143
216
microwave-east
an
company
www.nardamicrowave.com
SCHEMATIC SHOWN IN NORMALLY OPEN POSITION
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
SCHEMATIC SHOWN IN NORMALLY OPEN POSITION
SEM143D
SCHEMATIC SHOWN IN 50 Ω TERMINATED POSITION
SEM143T
SEM143DT and SEM143DT-24
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
SCHEMATIC SHOWN IN 50 Ω TERMINATED POSITION
microwave-east
an
company
217
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
RF Switching
Products
Power Monitors
and Sensors
Stocked Electro-Mechanical Switches
DC-18 GHz
SP5T SEM Series
yy Normally Open Version with
Indicator Circuits
yy SMA Connectors
Specifications
SP5T, SMA (F), DC to 18 GHz
MODEL
SEM153
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FEATURES
NORMALLY OPEN / INDICATOR CKT
Outline Drawing and Schematic
140
FREQUENCY
RANGE (GHz)
INSERTION
LOSS (dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
Dimensions in inches, unless otherwise specified.
SCHEMATIC SHOWN IN NORMALLY OPEN POSITION
SEM153
218
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
DC-18 GHz
SP6T SEM Series
yy Standard Features Include:
TTL Logic Control, Latching Models,
Terminated, Normally Open Models
Specifications
SP6T, SMA (F), DC to 18 GHz
MODEL
*
FEATURES
SEM066
NORMALLY OPEN / MINIATURE
SEM163
NORMALLY OPEN /
INDICATOR CKT
SEM163D
NORMALLY OPEN / TTL* /
SUPPRESSION DIODE /
INDICATOR CKT
SEM163T
NORMALLY OPEN / TERMINATED /
INDICATOR CKT
SEM163DT
NORMALLY OPEN / TERMINATED /
TTL* / SUPPRESSION DIODE /
INDICATOR CKT
SEM163LD
LATCHING / TTL* /
SUPPRESSION DIODE /
SELF DE-ENERGIZING /
INDICATOR CKT
SEM163LDT-24
LATCHING / INDICATOR CKT /
SELF DE-ENERGIZING / TTL* /
SUPPRESSION DIODE
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FREQUENCY
RANGE (GHz)
INSERTION LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
160
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
140
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
600
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
800
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
APPLIES TO ALL SWITCHES WITH TTL:
1. Selected position of the switch is controlled by TTL Logic
2. Switch requires only nominal +28 Vdc for coils (additional 5 Vdc is not required)
3. TTL LOGIC LEVEL: Low 0 to .8 Vdc High 2.5 to 5.0 Vdc
4. TTL LOGIC INPUT CURRENT: Low 0 mA High 1.6 mA max @ 3.85 Vdc
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
219
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
Power Monitors
and Sensors
RF Switching
Products
Stocked Electro-Mechanical Switches
Outline Drawings and Schematics
Dimensions in inches, unless otherwise specified.
SCHEMATIC SHOWN IN NORMALLY
OPEN POSITION
SEM066
A
B
C
D
F
E
F
E
D
C
B
A
SCHEMATIC SHOWN IN NORMALLY OPEN POSITION
SEM163
F
E
D
A
B
C
D
E
F
C
B
A
SCHEMATIC SHOWN IN NORMALLY OPEN POSITION
SEM163D
220
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
SCHEMATIC SHOWN IN 50 Ω TERMINATED POSITION
SEM163T
SEM163DT
SEM163LD
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
SCHEMATIC SHOWN IN NORMALLY OPEN POSITION
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
microwave-east
an
company
221
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
Power Monitors
and Sensors
RF Switching
Products
Stocked Electro-Mechanical Switches
Outline Drawings and Schematics
Dimensions in inches, unless otherwise specified.
NOM
VOLT
+28VDC
LOGIC CONTROL
RTN
1
2
3
5
4
6
TTL DRIVER
POWER BREAKER CONTROL CIRCUITRY
COM
1
2
3
4
5
6
SCHEMATIC
SHOWN WITH
POSITION
1 CLOSED1 CLOSED
SCHEMATIC
SHOWN
WITH
POSITION
SEM163LDT-24
222
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
DC-18 GHz
XSEM Series
Transfer Switches
yy Standard Features Include:
Failsafe and Latching Models
TTL Logic Control, Suppression Diodes
yy Indicator Circuits Provided With
All Models
Specifications
2P2T (Transfer), SMA (F), DC to 18 GHz
MODEL
ACTUATING CURRENT
(mA @28Vdc & 25°C)
FREQUENCY
RANGE
(GHz)
INSERTION
LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
280
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
280
DC-3
3-8
8-12.4
12.4-18
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
0.2
0.3
0.4
0.5
1.2
1.3
1.4
1.5
80
70
60
60
XSEM323
FAILSAFE / INDICATOR CKT
XSEM323D
FAILSAFE / TTL* /
SUPPRESSION DIODE /
INDICATOR CKT
XSEM323L
PULSE LATCHING /
INDICATOR CKT
320
DC-3
3-8
8-12.4
12.4-18
PULSE LATCHING / TTL*
320
375 @ 24V
DC-3
3-8
8-12.4
12.4-18
XSEM323LD
XSEM323LD-24
*
FEATURES
APPLIES TO ALL SWITCHES WITH TTL:
1. Selected position of the switch is controlled by TTL Logic
2. Switch requires only nominal +28 Vdc for coils (additional 5 Vdc is not required)
3. TTL LOGIC LEVEL: Low 0 to .8 Vdc High 2.5 to 5.0 Vdc
4. TTL LOGIC INPUT CURRENT: Low 0 mA High 1.6 mA max @ 3.85 Vdc
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
223
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
RF Switching
Products
Power Monitors
and Sensors
Stocked Electro-Mechanical Switches
Outline Drawings and Schematics
Dimensions in inches, unless otherwise specified.
SCHEMATIC SHOWN IN FAILSAFE POSITION
XSEM323
SCHEMATIC SHOWN IN FAILSAFE POSITION
XSEM323D
224
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
XSEM323L
SCHEMATIC SHOWN WITH POSITION 1 CLOSED
XSEM323LD and XSEM323LD-24
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
225
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
Power Monitors
and Sensors
RF Switching
Products
Stocked Electro-Mechanical Switches
DC-3 GHz
Commercial Use
RF Mechanical Switches
yy High Performance
yy Optimized for Cellular and
PCS Requirements
yy Used in Cell Site Systems, Production ATE
and Field Test Equipment
yy SP2T, Multithrow and Transfer Models
Available from Stock
Specifications
SP2T, SMA (F) and Type N (F), DC to 3 GHz
ACTUATING CURRENT FREQUENCY INSERTION LOSS
(mA @28Vdc & 25°C) RANGE (GHz)
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
TEMPERATURE
RANGE (C)
0.2
1.2
80
-10° to +60°
DC-3
0.2
1.2
80
-10° to +60°
200
DC-3
0.2
1.2
80
-10° to +60°
180
DC-3
0.2
1.2
80
-10° to +60°
INSERTION LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
TEMPERATURE
RANGE (C)
MODEL
FEATURES
MS-SMA-020
SMA (F) / FAILSAFE /
2 MILLION OPERATIONS
160
DC-3
MS-SMA-020-12
SMA (F) / FAILSAFE /
2 MILLION OPERATIONS
275
MS-SMA-020L
SMA (F) / LATCHING /
2 MILLION OPERATIONS
MS-N-023
TYPE N (F) / FAILSAFE /
1 MILLION OPERATIONS
DP2T (Transfer), SMA (F), DC to 3 GHz
ACTUATING CURRENT FREQUENCY
(mA @28Vdc & 25°C) RANGE (GHz)
MODEL
FEATURES
MS-SMA-223
FAILSAFE /
1 MILLION OPERATIONS
280
DC-3
0.2
1.2
80
-10° to +60°
MS-SMA-223L
LATCHING /
1 MILLION OPERATIONS
375
DC-3
0.2
1.2
80
-10° to +60°
INSERTION LOSS
(dB max.)
VSWR
(max.)
ISOLATION
(dB min.)
TEMPERATURE
RANGE (C)
SP3T and SP6T, SMA (F), DC to 3 GHz
ACTUATING CURRENT FREQUENCY
(mA @28Vdc & 25°C) RANGE (GHz)
MODEL
FEATURES
MS-SMA-033
FAILSAFE /
1 MILLION OPERATIONS
140
DC-3
0.2
1.2
80
-10° to +60°
MS-SMA-063
FAILSAFE /
1 MILLION OPERATIONS
140
DC-3
0.2
1.2
80
-10° to +60°
226
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
Outline Drawings
Dimensions in inches, unless otherwise specified.
MS-SMA-020 and MS-SMA-020-12
MS-SMA-020L
MS-N-023
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
227
Introduction
Integrated Microwave
Assemblies (IMAs)
Passive
Components
RF Switching
Products
Power Monitors
and Sensors
Stocked Electro-Mechanical Switches
Outline Drawings
Dimensions in inches, unless otherwise specified.
MS-SMA-223
MS-SMA-223L
228
microwave-east
an
company
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
Power Monitors
and Sensors
RF Switching
Products
Passive
Components
Integrated Microwave
Assemblies (IMAs)
Introduction
Stocked Electro-Mechanical Switches
MS-SMA-033
MS-SMA-063
www.nardamicrowave.com
E-MAIL: nardaeast@L-3com.com
TEL: +1 631 231-1700
microwave-east
an
company
229
Download