OFF-THE-SHELF
February
2012
Analog, Digital & Mixed-Signal ICs, Modules, Subsystems & Instrumentation
Hittite Exhibiting
at OFC 2012!
View Hittite’s expanded product
offerings at OFC in Los Angeles,
CA, March 6 to 8, 2012.
Booth #2050
30
New Featured
Products!
Integrated Automatic
Gain Control Solution
New Product Line: Clocks & Timing!
Two New Clock Generators Offer Best-In-Class Jitter, 78 fs RMS,
& Industry-Leading Phase Noise Performance from 125 MHz to 3 GHz!
Hittite has announced the launch of two exciting
new clock generators, the HMC1032LP6GE and the
HMC1034LP6GE for high performance Clock and
Timing applications.
The HMC1032LP6GE and HMC1034LP6GE offer programmable frequency synthesis from 125 MHz to
3 GHz in both integer and fractional-N relationships
to their reference clocks. The HMC1032LP6GE is
ideal for clocking DSP, FPGA and high performance processors, and operates from
125 MHz to 350 MHz, while the HMC1034LP6GE is designed to meet the stringent requirements of high speed data converters and Physical Layer Devices (PHY), and operates from 125 MHz to 3 GHz. The devices integrate high accuracy PLL and VCO circuits
and an advanced Delta-Sigma Modulator with 24-bit step range that enables excellent
frequency resolution of 3 Hz and below. The serial programming interface (SPI), and
Hittite’s easy-to-use configuration software allows for programming frequencies rapidly.
(Continued on page 10)
HMC993LP5E
• Gain Control Range: -11 to +32 dB
• Output IP3: +46 dBm
• Integrated High Accuracy Power
Detector
See Page 3
Microwave PA Solutions
HMC1016
• 34 to 46.5 GHz
• Psat Output Power: +26 dBm
• High Gain: 22 dB
See Page 6
24 GHz Analog Time Delay
Clock & Data Retiming Solutions
HMC911LC4B
• High Modulation Bandwidth:
1.6 GHz
• Adjustable Delay Range: 70 ps
• Single Supply: +3.3V
See Page 11
Hittite Adds Three New Microwave PLLs with Integrated VCOs!
Hittite has extended the industry leading integrated Phase Locked Loop (PLL) and
Microwave Voltage Controlled Oscillator (VCO) product line with the addition of three
new devices. Hittite now offers seven PLL with Integrated Microwave VCO products
in footprint compatible SMT packages with output frequency coverage from 7.3 to
13.4 GHz.
T h e H M C767LP6 CE, H M C76 9 LP6 CE an d H M C7 78 LP6 CE are full feature d
fractional-N PLL frequency synthesizers with integrated microwave VCOs. Each
of these new products offers low open loop phase noise of -140 dBc/Hz at 1 MHz offset, a 350 MHz reference path input, with an integrated
14-bit reference divider. The advanced delta-sigma
modulator design enables ultra-fine fractional step
sizes while achieving industry leading phase noise
and spurious emission performance. The highly integrated architecture provides market leading phase
noise performance over temperature, shock and
(Continued on page 10)
New Low Noise, High Linearity Wideband Direct Quadrature Modulator!
Covers Cellular/4G/LTE, Broadband Wireless Access & ISM Applications to 6 GHz
The HMC1097LP4E is an advanced low noise, high
linearity Direct Quadrature Modulator which is ideal for
digital modulation applications from 0.1 to 6 GHz. The
HMC1097LP4E meets all of the critical requirements
of next generation BTS cellular, providing very high
linearity of +30 dBm OIP3, and -160 dBm noise floor
across all cellular bands. The HMC1097LP4E also
exhibits a DC to 700 MHz modulation bandwidth, fast
enable and disable features and high output power
up to +11 dBm output P1dB. Housed in a compact 4 x 4 mm SMT QFN package, the
HMC1097LP4E dissipates less than 850 mW from a +5V supply, and offers improved
carrier feed through and sideband suppression characteristics.
Order On-line at: www.hittite.com
2 Elizabeth Drive • Chelmsford, MA 01824 • 978-250-3343 tel • 978-250-3373 fax
New PLL Chipset
Ideal for Spurious and Phase Noise Performance
See Page 9 for details on this chipset.
HMC983LP5E & HMC984LP4E
Medium Power Amplifier
34 to 46.5
6
HMC1022
Wideband Power Amplifier
DC to 48
4
Low Noise Amplifier
24 - 43.5
6
●
HMC1018LP4E
5-Bit Digital, Serial Control
0.1 to 30
4
●
HMC1019LP4E
5-Bit Digital, Serial Control
0.1 to 30
4
RF Automatic Gain Controller
0.7 to 3
3
HMC856LC5
5-Bit Digital Time Delay
28
11
●
HMC877LC3
Analog Time Delay & Phase Shifter
8 to 23
11
●
HMC910LC4B
Analog Time Delay
24
11
●
HMC911LC4B
Analog Time Delay
24
11
●
1:9 Fanout Buffer
DC to 8
7
●
●
●
HMC1032LP6GE
Clock Generator with
Fractional-N PLL+VCO
0.125 to 0.35
1
●
●
HMC1034LP6GE
Clock Generator with
Fractional-N PLL+VCO
0.125 to 3
1
●
Low Noise Regulator
1.8 to 5.2V
5
●
Divide-by-2
0.01 to 13
Programmable Divider (N = 1,3)
HMC1041LC4
e nt
Tes
t
Me &
a su
rem
HMC1016
ce
Page
Number
Bro
Frequency
(GHz)
Aut
o
Function
Part Number
Spa
adb
mo
t i ve
Hittite Microwave offers over 1,000 products across 34 product lines. Our
custom and standard products support a wide range of wireless / wired
communications and radar applications for the following markets.
and
C el
l
u
I nfr l a r
ast
ru c
Fib
tur
e
e
r
& N O pt
et w ic
o rk
Mic
in g
r
& m owav
mW e
ave
M il
it ar
y
New Products by Market Application
Amplifiers
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
7
●
●
●
●
●
0.1 to 13
7
●
●
●
●
I/Q Mixer / IRM
17 to 27
8
●
●
●
●
●
HMC1042LC4
I/Q Mixer / IRM
15 to 33.5
8
●
●
●
●
●
HMC1043LC4
+13 LO, TPL-BAL
26 to 32
6
●
●
●
●
●
Direct Quadrature
0.1 to 6.0
1
●
●
●
●
●
HMC1040LP3CE
●
Off-The-Shelf
Attenuators
Automatic Gain Control
HMC993LP5E
●
Broadband Time Delay
●
Clocks & Timing - New Product Line!
HMC987LP5E
DC Power Conditioning
HMC1060LP3E
●
Frequency Dividers
HMC361G8
HMC861LP3E
Mixers
Modulators & Demodulators
HMC1097LP4E
2
February 2012
Visit us at: www.hittite.com
●
●
●
New Broadband SPDTs Complement
Hittite’s Single, Double & Multi-Throw MMIC Switches
See Page 8 for SPDT Products with up to 50 GHz of wide bandwidth.
HMC986 & HMC547LC3
e nt
Tes
t
Me &
a su
rem
ce
adb
mo
t i ve
Hittite Microwave offers over 1,000 products across 34 product lines. Our
custom and standard products support a wide range of wireless / wired
communications and radar applications for the following markets.
and
C el
l
u
I nfr l a r
ast
ru c
Fib
tur
e
e
r
& N O pt
et w ic
o rk
Mic
in g
r
& m owav
mW e
ave
M il
it ar
y
New Products by Market Application
Page
Number
HMC767LP6CE
Microwave VCO
8.450 to 9.550
1
●
●
●
●
●
HMC769LP6CE
Microwave VCO
9.050 to 10.150
1
●
●
●
●
●
HMC778LP6CE
Microwave VCO
9.600 to 10.800
1
●
●
●
●
●
HMC833LP6GE
Wideband RF VCO
0.025 to 6.0
5
●
●
●
●
●
●
●
HMC834LP6GE
Wideband RF VCO
0.045 to 8.4
5
●
●
●
●
●
●
●
HMC983LP5E
Fractional Divider with Sweeper
DC to 7
9
●
●
●
●
●
●
HMC984LP4E
Phase Frequency Detector
DC to 0.35
9
●
●
●
●
●
●
SDLVA, Extended Range
0.5 to 18.5
4
●
●
●
●
SPDT, High Isolation
DC to 28
8
●
●
●
●
●
●
●
SPDT, Reflective
0.1 to 50
8
●
●
●
●
●
●
●
Bro
Spa
Frequency
(GHz)
Aut
o
Function
Part Number
PLL Chipset
SDLVAs
HMC1013LP4E
Switches
HMC547LC3
HMC986
Hittite Expands Automatic Gain Control Product Line!
Off-The-Shelf
PLLs with Integrated VCOs
Complete 0.7 to 3 GHz RF-AGC Solution in 25 mm2 SMT Package
Hittite has launched a new, complete RF Automatic Gain Control (RF-AGC)
solution. The HMC993LP5E combines a high performance analog Variable Gain
Amplifier (VGA) core with a high accuracy power detector in a RoHS compliant
5 x 5 mm QFN leadless package. HMC993LP5E is ideal for AGC implementation
in the 0.7 to 3 GHz frequency range in LTE/WiMAX/4G, microwave radio, VSAT,
test equipment and sensor applications.
Generally, analog VGAs exhibit large dips in their OIP3 performances at
certain control voltages or degradation as the attenuation is increased. The
HMC993LP5E differentiates itself from these traditional VGAs by providing a
constant OIP3 of +40 dBm over the entire attenuation range. The integrated
power detector features excellent temperature stability, and the HMC993LP5E
provides highly accurate power control in AGC closed loop operation which is
independent of part-to-part and temperature variations.
Output Power vs. Input Power over
VSET, 2 Attenuators @ 1900 MHz
0
OUTPUT POWER (dBm)
The HMC993LP5E operates from 0.7 to 3.0 GHz and features a wide gain
control range from -11 dB to +32 dB. The unique VGA core also provides a
consistent gain slope vs. control voltage; a characteristic which enables easier
implementation of AGC loops and provides a uniform transient response over
the entire attenuation range.
VSET=0.3V
VSET=0.5V
VSET=0.7V
-10
-20
-30
20 dB coupler is used
-40
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
The HMC993LP5E provides a flexible architecture, and can be configured with one or two attenuators, depending upon the
dynamic range requirements of the application. It can also be used as a standalone, high performance VGA in an open loop
configuration or as a compact RF-AGC solution in closed loop operation.
Visit us at: www.hittite.com
February 2012
3
New Power Amplifier, Control &
SDLVA Products for Wideband Applications
HMC1022
0.25 Watt Power Amplifier Chip, DC to 48 GHz
Ideal for Test Equipment
Psat vs. Supply Voltage
26
24
•High P1dB Output Power: +22 dBm
Psat (dBm)
22
Features
20
18
+8V
+10V
+11V
16
•High Psat Output Power: +24 dBm
14
•High Gain: 12 dB
12
•Supply Voltage: +10V @ 150 mA
0
5
10
20
25
30
35
40
45
50
FREQUENCY (GHz)
•50 Ohm Matched Input/Output
HMC1018LP4E / HMC1019LP4E
5-Bit Digital Attenuator SMTs, 0.1 to 30 GHz
High Accuracy, High Linearity
Normalized Attenuation
(Only Major States are Shown)
0
Features
•TTL/CMOS Compatible,
Serial Control
•Unique Asynchronous Mode
Control Allows Immediate
Attenuation Changes
NORMALIZED ATTENUATION (dB)
Off-The-Shelf
15
The HMC1022 is a GaAs pHEMT MMIC
Distributed Power Amplifier which
operates between DC and 48 GHz.
The amplifier provides 12 dB of gain,
32 dBm output IP3 and +22 dBm of
output power at 1 dB gain compression
while requiring 150 mA from a +10V supply. The HMC1022 exhibits a slightly
positive gain slope from 10 to 35 GHz,
making it ideal for EW, ECM, Radar
and Test Equipment applications. The
HMC1022 amplifier I/Os are internally
matched to 50 Ohms facilitating integration into Multi-Chip-Modules (MCMs).
-5
-10
-15
-20
-25
-30
-35
-40
0
5
10
15
20
25
30
The HMC1018LP4E & HMC1019LP4E
are broadband 5-bit GaAs IC digital
attenuators in low cost leadless surface
mount packages covering 0.1 to 30.0
GHz. The control interface is CMOS/
TTL compatible and accepts a three wire
serial input. The HMC1018LP4E and
HMC1019LP4E feature a user selectable
power up state and a serial output port.
These digital attenuators are ideal for
applications which require wide bandwidth and high linearity.
FREQUENCY (GHz)
•0.5 dB and 1.0 dB Resolution
•4 x 4 mm SMT QFN Packages
HMC1013LP4E
67 dB SMT SDLVA, 0.5 to 18.5 GHz
High Dynamic Range
Video OUT vs. Frequency
Over Input Power & Temperature
Features
•High Logging Range:
67 dB (-62 to +5 dBm)
•Output Frequency Flatness: ±2 dB
•Fast Rise/Fall Times: 5/15 ns
•Single Positive Supply: +3.3V
ERROR (dB)
8
6
1 GHz
2 GHz
10 GHz
14 GHz
4
6 GHz
18 GHz
2
0
-2
-4
-6
-8
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
•ESD Sensitivity (HBM): Class 1A
4
February 2012
Visit us at: www.hittite.com
20
The HMC1013LP4E is a Successive
Detection Log Video Amplifier which
operates from 0.5 to 18.5 GHz. It provides a logging range of 67 dB. This
device offers typical fast rise/fall times
of 5/15 ns and a superior delay time
of only 10 ns. The HMC1013LP4E log
video output slope is typically 15 mV/dB.
Maximum recovery times are less than
40 ns. The HMC1013LP4E is available in
a highly compact 4 x 4 mm SMT plastic
package and is ideal for high speed
channelized receiver applications.
New Linear Voltage Regulator & PLL + VCOs for
Cellular/4G/LTE, mWave & Military Communications
HMC1060LP3E
Quad Low Noise High PSRR Linear Voltage Regulator
Ultra Low Noise, High PSRR
The HMC1060LP3E is a BiCMOS ultra
low noise quad-output linear voltage
regulator targeted at high performance
applications requiring superb power
supply isolation. Maximum 500 mA
of current, distributed between four
independent outputs, enable the
HMC1060LP3E to supply all of the
power needs of Hittite’s Wideband
PLL with Integrated VCO products,
such as the HMC830LP6GE.
Features
•Ultra Low Noise:
3 nV/√Hz at 10 kHz,
7 nV/√Hz at 1 kHz
NOISE DENSITY (V/√Ηz)
Comparison with Typical Low Noise
Laboratory DC Power Supply
•High Power Supply
Rejection Ratio (PSRR):
80 dB at 1 kHz,
60 dB at 1 MHz
10
-5
10
-6
10
-7
10
-8
10
-9
Low Noise Laboratory Power Supply
HMC1060LP3E VR1 Output
10
-10
10
1
10
2
10
3
10
4
10
5
10
6
10
7
10
8
FREQUENCY (Hz)
HMC833LP6GE
Fractional-N PLL with Integrated VCO, 25 to 6000 MHz
Wideband Frequency Coverage
Typical Closed Loop
Fractional Phase Noise
-80
Features
•RF Bandwidth: 25 to 6000 MHz
•Maximum Phase Detector
Rate 100 MHz
PHASE NOISE (dBc)
-100
-120
-140
-160
-180
fout 3805 MHz,Loop BW 74KHz,rms jitter 123fsec
fout 3805MHz,Loop BW 90KHz,rms jitter 104fsec
fout 5605MHz,Loop BW 74KHz,rms jitter 202fsec
fout 5605MHz,Loop BW 90KHz,rms jitter 128fsec
fout 1605MHz, Loop BW 74KHz,rms jitter 130fsec
fout 1605MHz, Loop BW 90KHz, rms jitter 123fsec
-200
•Ultra Low Phase Noise
-110 dBc/Hz in Band Typical
-220
1
10
1
10
2
10
3
10
4
10
OFFSET (kHz)
•Figure of Merit (FOM)
-227 dBc/Hz
HMC834LP6GE
5
The HMC833LP6GE features industry
leading phase noise and spurious
performance, across all frequencies,
that enable it to deliver excellent
receiver sensitivity and transmitter
spectral purity. The superior noise floor
(< -170 dBc/Hz) makes it an ideal source
for a variety of applications - such as;
LO for RF mixers, a clock source for
high-frequency data-converters, or
a tunable reference source for ultralow spurious applications. The device
features a delta-sigma modulator
Exact Frequency Mode that enables
users to generate output frequencies
with 0 Hz frequency error.
Off-The-Shelf
•Four Adjustable Voltage Outputs:
VR1: 100 mA at 1.8 to 5.2V,
VR2 & VR3: 50 mA at 1.8 to 5.2V,
VR4: 300 mA at 1.8 to 5.2V
Fractional-N PLL with Integrated VCO, 45 to 8400 MHz
Excellent Spectral Performance
Typical Closed Loop
Fractional Phase Noise
Features
•RF Bandwidth:
45 to 1050,
1400 to 2100,
2800 to 4200,
5600 to 8400 MHz
•Maximum Phase Detector
Rate 100 MHz
PHASE NOISE (dBc/Hz)
-60
fout 3605 MHz, Loop BW
fout 5605 MHz, Loop BW
fout 8305 MHz, Loop BW
fout 3605 MHz, Loop BW
fout 5605 MHz, Loop BW
fout 8305 MHz, Loop BW
-80
130 kHz, rms jitter 145 fs
130 kHz, rms jitter 123 fs
130 kHz, rms jitter 227 fs
250 kHz, rms jitter 110 fs
250 kHz, rms jitter 95 fs
250 kHz, rms jitter 112 fs
-100
-120
-140
-160
-180
10
3
10
4
10
5
10
6
10
7
OFFSET (Hz)
10
8
The HMC834LP6GE features industry
leading phase noise and spurious
performance, across all frequencies,
that enable it to deliver excellent
receiver sensitivity and transmitter
spectral purity. The superior noise floor
(< -170 dBc/Hz) makes it an ideal source
for a variety of applications - such as;
LO for RF mixers, a clock source for
high-frequency data-converters, or
a tunable reference source for ultralow spurious applications. The device
features a delta-sigma modulator
Exact Frequency Mode that enables
users to generate output frequencies
with 0 Hz frequency error.
•Figure of Merit (FOM)
-227 dBc/Hz
Visit us at: www.hittite.com
February 2012
5
New Amplifiers & Mixers for Microwave
Radio, Military & Space Applications
HMC1040LP3CE
GaAs pHEMT MMIC Low Noise Amplifier, 24 to 43.5 GHz
Wideband, Low Noise Figure
Noise Figure vs. Temperature
6
+25C
+85C
-40C
Features
•Low Noise Figure: 2.2 dB
•High Gain: 23 dB
NOISE FIGURE (dB)
5
4
3
2
1
•High P1dB Output
Power: +12 dBm
0
24
26
28
30
32
34
36
38
40
42
44
FREQUENCY (GHz)
•High Output IP3: +14 dBm
The HMC1040LP3CE is a self-biased
Ga As MMIC Low Noise Amplifier
housed in a leadless 3 x 3 mm plastic
surface mount package. The amplifier
operates between 24 and 43.5 GHz,
providing 23 dB of small signal gain,
2.2 dB noise figure, and output IP3 of
+22 dBm, while requiring only 70 mA
from a +2.5V supply. The P1dB output
power of +12 dBm enables the LNA
to function as a LO driver for many of
Hittite’s balanced, I/Q and image reject
mixers and receivers.
HMC1016
Medium Power Amplifier Chip, 34 to 46.5 GHz
High Gain, High Output Power
Psat vs. Supply Voltage
30
28
26
Features
•P1dB Output Power: +24 dBm
Psat (dBm)
Off-The-Shelf
•Single Supply Voltage:
+2.5V @ 70 mA
•Psat Output Power: +26 dBm
24
22
20
5.0V
5.5V
6.0V
18
•High Gain: 22 dB
16
14
•Output IP3: +34 dBm
33
35
37
39
41
43
45
47
FREQUENCY (GHz)
HMC1043LC3
The HMC1016 is a four stage GaAs
PHEMT MMIC Medium Power Amplifier
die which operates between 34 and
46.5 GHz. The amplifier provides 22 dB
of gain, +26 dBm of saturated output
power, and 17% PAE from a +6V supply.
With up to +37 dBm IP3 the HMC1016
is ideal for high linearity applications in
military and space as well as point-topoint and point-to-multi-point radios.
The HMC1016 amplifier I/Os are internally matched facilitating integration into
multi-chip-modules (MCMs).
GaAs MMIC Triple Balanced Mixer, 26 to 32 GHz
Excellent Isolation
Isolation, LO/IF, LO/RF, 2LO/IF
0
-10
Features
•P1dB Output Power: +24 dBm
•High Input IP3: +23 dBm
•High LO/RF Isolation: 45 dB
•High 2LO/IF Isolation: 50 dB
•Upconversion &
Downconversion Applications
6
February 2012
ISOLATION (dB)
-20
LO/IF
-30
LO/RF
-40
-50
2LO/IF
-60
-70
-80
6
7
8
9
10
11
LO FREQUENCY (GHz)
Visit us at: www.hittite.com
12
The HMC1043LC3 is a general purpose
sub-harmonic triple balanced mixer
that can be used as a frequency converter with 16 to 22 GHz at the IF port
and 26 to 32 GHz at the RF port. This
mixer requires no external components
or matching circuitry. The HMC1043LC3
provides excellent port-to-port isolation
and operates with LO drive levels from
+9 dBm to +15 dBm. The HMC1043LC3
is housed in a convenient 3 x 3 mm
package and is compatible with surface
mount manufacturing techniques.
New Products for Clock Distribution &
Signal Generation Applications
HMC987LP5E
Low Noise 1:9 Fanout Buffer, DC to 8 GHz
Ideal Clock Distribution
-110
Features
•Ultra Low Noise Floor:
-166 dBc/Hz @ 2 GHz
•LVPECL, LVDS, CML & CMOS
Compatible Inputs
PHASE NOISE (dBc/Hz)
-120
Source + Fanout Output Noise
-130
-140
-150
-160
-170
HMC830LP6GE Used as Source
-180
•Power Down Current: <1µA
10
3
10
4
5
6
10
10
FREQUENCY OFFSET (Hz)
10
7
10
HMC361G8
8
The HMC987LP5E 1-to-9 fanout buffer is designed for low noise clock
distribution. It is intended to generate
relatively square wave outputs with
rise/ fall times < 100 ps. The low skew
and jitter outputs of the HMC987LP5E,
combined with its fast rise/ fall times,
leads to controllable low-noise switching of downstream circuits such as mixers, ADCs/DACs or SERDES devices.
The noise floor is particularly important
in these applications, when the clock
network bandwidth is wide enough to
allow square wave switching.
SMT MMIC Divide-By-2, 0.1 to 13 GHz
Wideband Hermetic Divider
SSB Phase Noise Performance vs.
Temperature, Pin = 0 dBm, Fin = 6 GHz
Features
•Ultra Low SSB
Phase Noise:
-148 dBc/Hz
SSB PHASE NOISE (dBc/Hz)
-110
•Wide Bandwidth
+25C
+85C
-40C
-120
-130
-140
-150
-160
2
10
•Output Power: 3 dBm
3
10
4
10
5
10
6
7
10
10
8
10
The HMC361G8 is a low noise N = 2
static divider in an 8 lead glass/metal
surface mount (hermetic) package.
This device operates from 10 MHz (with
a square wave input) to 13 GHz input
frequency with a single +5V DC supply.
The low additive SSB phase noise of
-148 dBc/Hz at 100 kHz offset helps the
user maintain good system noise performance. Hittite offers many hemetic
packaged products for space and high
reliability applications.
Off-The-Shelf
Phase Noise Performance
at 2 GHz (Differential Drive)
OFFSET FREQUENCY (Hz)
•Single DC Supply: +5V
•8 Lead Hermetic SMT Package
HMC861LP3E
13 GHz Low Noise Programmable Divider (N = 1, 3) SMT
Low Noise Divide-by-3
The HMC861LP3E is a low noise
programmable frequency divider in a
3 x 3 mm leadless surface mount package. The divider can be programmed
to divide from N= 1, 3 in the 100 MHz
to 13 GHz input frequency range. The
low phase noise and wide frequency
range make this device ideal for high
performance and wide band communication systems.
Phase Noise vs. Frequency,
Pin = 0 dBm
Features
•Low Noise Floor: -152 dBc/Hz
at 100 kHz Offset
•Programmable Frequency
Divider, N = 1 or 3
•Wide Bandwidth 100 MHz to 13 GHz
SSB PHASE NOISE (dBc/Hz)
-120
100MHz SQ
100MHz SINE
6 GHz
13 GHz
-130
-140
-150
-160
-170
1.0e+2
1.0e+3
1.0e+4
1.0e+5
1.0e+6
1.0e+7
OFFSET FREQUENCY (Hz)
Visit us at: www.hittite.com
February 2012
7
New I/Q Mixers & SPDTs for Microwave
Radio, Military and Test Equipment
New I/Q Mixers are Ideal for Microwave Radio Transceivers
IMAGE REJECTION (dBc)
The HMC1041LC4 and the HMC1042LC4
HMC1041LC4 Image Rejection
are MMIC I/Q mixers which are housed
50
in leadless RoHS compliant QFN SMT
40
packages. These compact MMIC mixers
employ a unique GaAs MESFET architec30
ture which utilizes double balanced mixer
cells and an on-chip 90 degree hybrid for
20
nearly perfect amplitude and phase bal+25 C
10
ance. As a result, the HMC1041LC4 and
+85 C
-40 C
the HMC1042LC4 deliver low conversion
0
loss, high port to port isolation and excel17
19
21
23
25
27
RF FREQUENCY (GHz)
lent image rejection. Due to their passive architecture, the HMC1041LC4 and
HMC1042LC4 can be used as an image reject mixer (IRM) in a microwave receiver, or
as a transmitter single sideband (SSB) upconverter. These SMT mixers occupy only
16 mm2 of PC board area, require no external matching components, and represent a
much smaller alternative to hybrid and microwave integrated circuit based image reject
mixers and single sideband upconverter assemblies.
Features
•Wide IF Bandwidth to 3.5 GHz
•Excellent Image Rejection to 36 dB
•Excellent LO/RF Isolation to 40 dB
•GaAs MMIC Mixer Technology
Applications
•Microwave Radio
•Point to Multi-Point Radio
•SatCom Transponders
•ECM and EW Subsystems
RF / LO
Frequency (GHz)
IF Frequency
(GHz)
Conversion
Gain (dB)
Image
Rejection (dB)
IIP3
(dBm)
Part Number
17 - 27
DC - 3.5
-9
36
20
HMC1041LC4
15 - 33.5
DC - 3.5
-10
30
22
HMC1042LC4
3-7
DC - 3.5
-7.5
32
22
HMC620LC4
11 - 16
DC - 3.5
-8
35
26
HMC528LC4
Broadband SPDTs for Test Equipment and Military Applications
The HMC986 and the HMC547LC3 are
wideband Single Pole Double Throw
(SPDT) MMIC switches which are ideal for
demanding applications which require low
insertion loss, fast switching speed and
wide bandwidth.
Features
•Wide Bandwidth to 50 GHz
•Fast Switching Speed to 6 ns
•High Isolation to 40 dB
•Low Insertion Loss to 1.9 dB
•High Input IP3 to +46 dBm
Applications
•Wideband Switching Matrices
•High Speed Data Infrastructure
•Military Communications
and Sensors
•Test and Measurement Equipment
•Jamming and EW Subsystems
8
With the addition of these two new products, Hittite offers an I/Q mixer solution for
virtually every microwave radioband in operation. Many of our I/Q mixer products are
available in both bare die and in SMT QFN packages.
February 2012
The HMC986 GaAs pHEMT SPDT Switch
die is rated from 100 MHz to 50 GHz, and
is controlled with two complementary
inputs of 0/-3V. This tiny switch is less than
0.8 mm2 and employs a low loss architecture. With an input signal at 40 GHz, the
HMC986 exhibits 20 dB return loss, 31 dB
isolation, and only 1.9 dB insertion loss.
HMC986 Insertion Loss
0
INSERTION LOSS (dB)
Off-The-Shelf
•Military Communications
-1
-2
-3
-4
+25 C
+85 C
-55 C
-5
0
10
20
30
40
50
FREQUENCY (GHz)
The HMC547LC3 is a GaAs MESFET SPDT switch in a ceramic 3 x 3 mm leadless surface mount package which covers DC to 28.0 GHz. This high isolation, non-reflective
switch offers over 40 dB isolation and less than 2 dB insertion loss at midband. This
versatile switch operates using complementary negative control voltage logic lines of
0/-5V and requires no bias supply.
The HMC986 and the HMC547LC3 complement Hittite’s extensive line of single,
double and multi-throw MMIC switches with frequency coverage from DC to 86 GHz.
Frequency
(GHz)
Insertion
Loss (dB)
Isolation
(dB)
Input
P1dB (dBm)
0.1 - 50
1.9
31
25
0 / -3V
HMC986
DC - 28
1.8
47
23
0 / -5V
HMC547LC3
Visit us at: www.hittite.com
Control
Input (Vdc)
Part Number
New PLL Chipset Solution for
Test & Measurement and Military
PLL Chipset for Ultimate Spurious & Phase Noise Performance!
48-bit Delta-Sigma Modulator, Built-in Frequency Sweeper
PLL Performance @ 7000.01 MHz,
50 MHz PDF
Ideal for test & measurement
and military applications, the
HMC983LP5E DC to 7 GHz
Fractional-N Divider and Frequency
Sweeper
and
the
HMC984LP4E Digital PhaseFrequency Detector and Charge
Pump form a high performance
PLL chipset solution targeted at PLL FMCW sweeper applications requiring ultimate performance.
-60
PHASE NOISE (dBc/Hz)
-80
-100
-120
-140
-160
The HMC983LP5E integrates the industry’s largest programmable
48-bit Delta-Sigma Modulator enabling the combined PLL to achieve
unparalleled fractional frequency resolution of 180 nHz. A built-in frequency sweeper enables the combined PLL to generate identical, coherent, FMCW frequency sweeps that can be linear, user-defined, automatic
or triggered.
-180
2
10
10
3
4
5
6
10
10
10
OFFSET FREQUENCY (Hz)
10
7
10
8
HMC983LP5E Built-In Automatic
FMCWS Sweeper Feature
7000
FREQUENCY (MHz)
6800
6700
6600
6500
6400
Although the HMC983LP5E and the HMC984LP4E can be used sepa0
5
10
15
20
TIME (ms)
rately in stand-alone applications, partitioning the PLL building blocks
into two distinct devices achieves superb isolation and results in market leading spurious emissions performance exceeding -60 dBc/Hz inside-the-loop-bandwidth. Both the HMC983LP5E and
the HMC984LP4E are housed in plastic leadless surface mount packages provide excellent temperature stability over the
-40 °C to 85 °C operating range.
Samples and evaluation PC boards for all SMT packaged products are available from stock and can be ordered via the
e-commerce site or via direct purchase order.
HMC984LP4E
Reference
Source
÷R
/ Fo
DET
DIV
Frequency
Synthesizer
Loop
Filter
Charge
Pump
Off-The-Shelf
6900
The HMC984LP4E provides an ultra low noise phase detector and charge
pump capable of operating at high phase detector frequencies of 125 MHz
in fractional mode, and 175 MHz in integer mode. This capability enables
the PLL chipset to utilize wider loop bandwidths which result in better
phase noise performance, faster PLL locking times and faster frequency
sweeps. The PLL chipset phase noise Figure of Merit performance is
-231 dBc/Hz in integer mode and -227 dBc/Hz in fractional mode.
VCO
Vtune
fvco = N * fpd
÷N
Delta-Sigma
Modulator
HMC983LP5E
The HMC983LP5E and HMC984LP4E form a PLL Chipset Solution for Test & Measurement and Military Applications
Visit us at: www.hittite.com
February 2012
9
New Products for Fiber Optics & Networking
and Microwave / mmWave Communications
New Product Line: Clocks & Timing!…(continued from page 1)
A proprietary ‘Exact Frequency Mode’ of operation reduces frequency
errors in fractional-N synthesis mode while maintaining the excellent
noise and spur performance of the device.
HMC1034LP6GE Integrated RMS Jitter
300
The state-of-the-art HMC1034LP6GE clock generator achieves an
industry leading phase jitter performance of 78 fs RMS typical (12 kHz to
20 MHz integration bandwidth) when operating at 800 MHz, and improves
link level jitter performance, interface Bit-Error-Rates (BER ) and Eye
Diagram metrics. The device is ideal for low noise clock multiplication in
Networking, Data Center and Storage applications.
-40C
27C
85C
JITTER (fs)
250
200
150
100
The HMC1032LP6GE and HMC1034LP6GE may be used to generate the
sample clocks for high speed data converters (ADC & DAC) in Cellular
Infrastructure and Fiber Optics applications. With a phase noise floor
of less than -165 dBc/Hz, the clock generators improve the SNR performance of data converters by providing very clean sample and device clocks.
50
100
1000
10000
OUTPUT FREQUENCY (MHz)
The HMC1032LP6GE and HMC1034LP6GE are each assembled in 6 x 6 mm plastic leadless surface mount packages, and
support operation over the -40 °C to +85 °C temperature range. Evaluation Kits with easy-to-use USB programming capability
and GUI-based programming software to set the desired register configuration are available from Hittite.
Hittite Adds Three New Microwave PLLs with Integrated VCOs!…(continued from page 1)
process, along with a rich integrated feature-set including: external triggering, double-buffering, exact frequency generation with 0 Hz frequency
error, frequency modulation, phase modulation and more.
HMC778LP6CE SSB Phase Noise
vs. Temperature @ 9.6 - 10.8 GHz
-70
These new products offer the same exceptional microwave VCO
performance for which Hittite is widely recognized, with the added
functionality of an advanced, integrated, high performance fractional-N
synthesizer. The HMC767LP6CE, HMC769LP6CE and HMC778LP6CE
are housed in leadless QFN 6 x 6 mm surface mount packages and deliver
high output power of up to +12 dBm, making them ideal for directly driving
the LO port of many of Hittite’s high linearity, double balanced and I/Q
mixer and receiver products.
-80
PHASE NOISE (dBc/Hz)
Off-The-Shelf
Both devices provide an AC-coupled, differential clock pair with 2-bit adjustable output amplitude, which may be set via the
SPI interface, and an output Mute function.
-90
-100
-110
-120
-130
-140
+ 25C
+ 85C
- 40C
-150
-160
-170
2
10
10
3
10
4
10
5
10
6
10
7
To minimize design time and resources, Hittite offers an advanced
OFFSET FREQUENCY (Hz)
Evaluation Kit to support each of the PLL with Integrated Microwave VCO
products. The Evaluation Kit includes an Evaluation Board with a USB interface that contains an on-board reference oscillator
and voltage regulators, and supports universal loop filter configurations. Included software allows the user to program,
observe and test full performance and functionality of the PLL with Integrated Microwave VCO. Hittite’s proprietary PLL
Design Software Suite enables users to simulate and predict the effect of any parameter on the performance of the PLL with
Integrated Microwave VCO, and to design a loop filter targeted at a specific application.
Hittite’s line of PLL with Integrated Microwave VCO products uniquely combine the attributes of low phase noise, advanced
features and compact size, making them ideal for numerous small form factor applications including microwave/millimeterwave
radios, test equipment, fiber optic communications, and military communications and sensors.
Closed Loop
SSB PN @
10 kHz Offset
Open Loop
VCO PN @
1 MHz Offset
Pout
(dBm)
RMS Jitter
Fractional
Mode (fs)
Int. PN
Fractional Mode
(deg rms)
7300 - 8200
-101 dBc / Hz
-140 dBc / Hz
15
196
0.58
HMC764LP6CE
7800 - 8800
-101 dBc / Hz
-140 dBc / Hz
13
193
0.61
HMC765LP6CE
Part Number
NEW!
8450 - 9550
-107 dBc / Hz
-138 dBc / Hz
12
93
0.3
HMC767LP6CE
NEW!
9050 - 10150
-106 dBc / Hz
-140 dBc / Hz
12
82
0.28
HMC769LP6CE
NEW!
10
Frequency
(MHz)
9600 - 10800
-106 dBc / Hz
-140 dBc / Hz
9
83
0.31
HMC778LP6CE
11500 - 12500
-99 dBc / Hz
-134 dBc / Hz
10
181
0.81
HMC783LP6CE
12400 - 13400
-98 dBc / Hz
-132 dBc / Hz
8
175
0.84
HMC807LP6CE
February 2012
Visit us at: www.hittite.com
Complete Solutions for Fiber Optics &
Networking and Test Equipment
Portfolio of Broadband Time Delays & Phase Shifters for Clock & Data Alignment!
Hittite Adds Two New Broadband Time Delay/Phase Shifter Products
The HMC911LC4B is a DC to 24 GHz
Broadband Time Delay product that provides a continuously variable delay from
0 ps to 70 ps while maintaining a constant differential output voltage swing.
The device accepts either single-ended
or differential input data, while the differential output swing is adjustable from
150 mVp-p to 800 mVp-p. The modulation bandwidth is 1.6 GHz, which is the
highest phase modulation bandwidth
available in the market. Suitable for
both clock and data lane alignment
applications, the HMC911LC4B is ideal
for 10G, 40G RZ-DQPSK, 100G DWDM
RZ Carver clock chain and skew
adjustments in the fiber optic domain.
monotonic with respect to the differential delay control voltage, over a ±0.6V
tuning range. It also features internal
temperature compensation and bias
circuitry to minimize delay variation with
temperature, ensuring an extremely
stable programmable time delay over
both frequency and temperature. A high
delay control modulation bandwidth
(3 dB rolloff point) of 2.5 GHz combined
with single +3.3V operation also make
the HMC877LC3 an excellent choice
for military, space, test & measurement
and broadband applications.
The HMC911LC4B features internal
temperature compensation and bias
circuitry to minimize delay variations
with temperature.
The HMC877LC3 Broadband Time
Delay/Phase Shifter is ideal for
clock chain and skew adjustment in
10G-RZ, 40G/100G RZ-DQPSK fiber
optic applications. The HMC877LC3
is the first Time Delay/Phase Shifter
product in the market to provide 0 to
500° (1.4 Unit Interval) continuously
adjustable delay over a wide 8 to
23 GHz frequency range. The device
provides a differential output voltage
with constant amplitude for singleended or differential input voltages
above the input sensitivity level. A control pin may be used to adjust the output
voltage swing between 500 mVp-p and
900 mVp-p. This device provides a
time delay/phase shift which is linearly
The HMC911LC4B and HMC877LC3,
along with previously released
HMC856LC5 and HMC910LC4B time
delays complement many of Hittite’s
limiting amplifiers, modulator drivers
and high speed logic products to provide a complete solution for fiber optic
and test equipment applications.
HMC611LP4E
Log Detector
● 1 MHz - 10 GHz
● 69 ±3 dB Dynamic Range
INPUT
16x
622 Mbps
1:16
MUX WITH CDR
SERIALIZER
HMC871LC5
HMC870LC5
DC - 20 GHz EA
Modular Driver
DC - 20 GHz MZ
Modular Driver
Idd = 140mA @ 5V
!
NEW HMC1034LP6GE
Clock Generator, 0.125 - 3 GHz
● 78 fs RMS Jitter Exceeds
G.8251 & GR-253-CORE
Specifications
RZ PULSE
CARVER
Idd = 140mA @ 5V
10.75 GHz
CLOCK
PLL
10 Gbps MZ
MODULATOR
10 Gbps NRZ
!
HMC897LP4E
HMC877LC3 NEW
HMC441LC3B
Band Pass Filter
● 9 - 19 GHz
Analog Time Delay
● 8 - 23 GHz
Med. Power Amp.
● 6 - 18 GHz
Off-The-Shelf
Hittite Microwave Corporation has
recently expanded its Broadband
Time Delay/Phase Shifter portfolio
adding two exciting new products, the
HMC911LC4B and the HMC877LC3.
!
EW
HMC996LP4E N
Analog VGA
● 5 - 12 GHz
● 22 dB Gain Control Range
HMC948LP3E
mmW Log Detector
● 1 - 23 GHz
● 54 ±3 dB Dynamic Range
Clock Chain & Modulator Drivers
for 10 Gbps Transmitter
HMC911LC4B Data Eye Diagram, 10 Gbps
HMC877LC3 Eye Diagram, 15 GHz
Time Scale: 10 ps/div
Amplitude Scale: 81.8 mV/div
Test Conditions:
VCC=3.3 V, ODWN=0 V
VDCP = 300 mVpp @ 1 MHz
VDCN is 50 Ohms terminated
Measurement Result:
26.8 ps (0.4 UI )
Visit us at: www.hittite.com
HMC911LC4B Time Delay vs.
Delay Control Voltage
80
NORMALIZED TIME DELAY (ps)
Time Scale: 20 ps/div
Amplitude Scale: 96.4 mV/div
Test Conditions:
VCC = 3.3V, VAC = 2.6V,
VDCP = 1200 mVp-p @ 1800 MHz
VDCN is 50 Ohms terminated
Input Data: Differential 400 mVp-p
10 Gbps NR Z
PRBS 223-1 pattern
Measurement Result:
Time Delay = 45.2 ps
70
60
50
40
30
10 GHz
16 GHz
20 GHz
22 GHz
24 GHz
20
10
0
-0.6
-0.4
-0.2
0
0.2
0.4
0.6
DIFFERENTIAL DELAY CONTROL VOLTAGE (V)
February 2012
11
February
2012
Connecting Our World Through Integrated Solutions
Hittite Microwave Worldwide Sales Offices
Americas
Europe, Middle East & Africa
Hittite Microwave Corporation
USA Corporate Headquarters
Phone: 978-250-3343
Fax: 978-250-3373
sales@hittite.com
United Kingdom, Ireland, Spain,
Portugal, Greece & Turkey
Hittite Microwave Europe Limited
Phone: +44-7811-267418
Fax: +978-250-3373
europe@hittite.com
Eastern - North America
Boston, MA
Phone: 978-270-3167
usa-east-north@hittite.com
Central (North) - North America
Chicago, IL
Phone: 312-485-8730
usa-north@hittite.com
Central (South) - North America
Dallas, TX
Phone: 817-727-7146
usa-south@hittite.com
Western - North America
Los Angeles, CA
Phone: 626-961-5602
usa-west@hittite.com
Mexico, Central & South America
Dallas, TX
Phone: 978-250-3343 x1250
southamerica@hittite.com
Asia & Pacific
Northern Europe
Hittite Microwave Nordic AB
Phone: +46-761-763969
nordic@hittite.com
Philadelphia, PA
Phone: 978-337-1226
usa-east-south@hittite.com
Middle East & Africa
Hittite Microwave Europe Limited
Reading, Berkshire, United Kingdom
Phone: +44-7811-267418
Fax: +978-250-3373
mea@hittite.com
Central & Eastern Europe,
France, Italy & Benelux
Hittite Microwave Deutschland GmbH
Phone: +49-8031-97654
Fax: +49-8031-98883
germany@hittite.com
Central & Eastern Europe
Hittite Microwave Deutschland GmbH
Phone: +49-8031-97654
Fax: +49-8031-98883
germany@hittite.com
Australia & New Zealand
Hittite Microwave Corporation
Phone: 978-250-3343
Fax: 978-250-3373
ausnz@hittite.com
India
Hittite Microwave India
Phone: +91-9849134642
Fax: +978-250-3373
india@hittite.com
Japan
Hittite KK
Phone: +81-3-5652-5772
Fax: +81-3-5652-6694
japan@hittite.com
Republic of Korea
Hittite Microwave Asia Co., Limited
Phone: +82-2559-0638
Fax: +82-2559-0639
korea@hittite.com
Peoples Republic of China
Hittite Microwave Co., Limited
Shanghai Office
Phone: +86-21-6209-8809
Fax: +86-21-6209-6730
china@hittite.com
Shenzhen Office
Phone: +86-755-3322-2116
Fax: +86-755-3322-2117
shenzhen@hittite.com
Beijing Office
Phone: +86-10-6485 9219
Fax: +86-10-6485 0377
beijing@hittite.com
Russia & Ukraine
Hittite Microwave Europe Limited
Reading, Berkshire, United Kingdom
Phone: +44-7811-267418
Fax: +978-250-3373
russia@hittite.com & ukraine@hittite.com
Sales Representatives
Americas
Brazil;
Vermont Rep. Com. Ltda
+55 11 3726-6655
Canada;
Repwave
Calgary, Ottawa & Montreal:
+613-270-9811
Toronto:
+647-883-7360
Vancouver:
+604-929-8541
Mexico
Quad State Sales and Marketing
918-499-1711
Central & South America
Hittite Microwave Corporation
978-250-3343 x1250
DC, DE, MD, VA & WV:
Vincent Pirro Electronics
410-489-9554
USA Mid-West;
CO, ID, MT, UT & WY:
Innovation Sales
303-652-3030
IA
Essig & Associates
319-363-8703
No. CA & NV:
Custom & Wireless Sales
408-371-0222
AK, KS, LA, W. MO, OK, TX:
Quad State Sales & Marketing
918-499-1711
So. CA:
Acetec
858-784-0900
IL & WI:
TEQ Sales
847-742-3767
OR & WA:
Sea-Port Technical Sales
425-702-8300
IN, KY, MI & OH:
Schillinger Associates, Inc.
765-457-7241
Europe, Mid-East & Africa
USA North East & Mid-Atlantic;
MN, ND, SD & NE:
HMC Central (North) - North America
312-485-8730
CT, MA, ME, NH,
So. NJ, RI & VT:
Microwave Marketing Specialist
978-392-0110
MN, ND, SD & W. WI:
Matrix Marketing Group
952-400-1070
USA South East;
Western NY:
Zimmerman Sales
585-381-3186
So. CT, Metro LI & No. NJ:
Comp Tech
973-832-4545
Eastern PA & So. NJ
Omega Electronic Sales, Inc.
215-244-4000
Western PA
Schillinger Associates, Inc.
765-457-7241
USA West;
AL, FL, GA, MS, NC, SC & TN:
Precision Marketing Inc.
954-752-1700
USA South West;
AZ & NM:
Saguaro Technical Sales, Inc.
480-947-3724
Germany, Austria, Poland, Switzerland
MEV Elektronik Service GmbH
49 5424 2340-28
Belgium, Czech Republic, Estonia,
Hungary, Latvia, Lithuania, Luxemburg,
Netherlands, Slovakia:
Hittite Microwave Deutschland GmbH
+49 8031-97654
Bosnia Herzegovina, Bulgaria,
Croatia, Macedonia, Romania,
Serbia Montenegro & Slovenia
IC Electronika
+386(0) 1 568-01-33
Denmark
Acte A/S
+45 46 900 400
Finland:
LKC OY
AR:
HMC Central (South) - North America +358-400-460-646
817-727-7146
Asia & South Pacific
France:
L-TEQ Microwave
+33-1-3007-7780
Greece:
Hittite Microwave Europe Limited
+44-7811-267418
Ireland & United Kingdom:
Firefly Technology Ltd.
+44-1256-884980
Australia & New Zealand:
Braemac (SA) Pty, Ltd
+61-8-8275-0100
China & Hong Kong:
Gateway Tech Co., Ltd.
+0755-8608-1010
Secom Telecom Co., Ltd.
+86-755-25155888
Israel:
Star Rep
972-9-880510
Wai Tat Electronics Ltd.
+852-2799-7393
India:
Syratron
+91-802-5591107 or 5591031
Starlight Technologies, Inc.
+972-3-9410555
Italy:
Special-Ind SPA
+39-02-6074741
Indonesia, Malaysia,
Philippines & Singapore
MEDs Technologies, Pte., Ltd.
+65-6453-8313
Norway:
Bredengen AS
+47-2100-9100
Japan:
Daito Electron Co., Ltd
+81-3-3237-1471
Russia
Radiant-Elcom Ltd.
+7(495) 725-0404
Rikei Corporation (only FO & HSL)
+81-3-3345-2150
Spain & Portugal:
Altaix Electronica S.A.L
+34-91-636-39-39
Korea:
EZ Hightech
+82-031-382-6500
South Africa:
RF Design Laboratory Co
+27-21-555-8400
JS Commtech
+82-2-574-6100
Makus
82-2-3490-9526
Sweden
RF Partner AB
+46-31-475100
Taiwan R.O.C.:
Bandtek International Co., Ltd.
+886-2-2657-2615
Turkey:
EMPA Electronics
+90 (212) 465-71-99
Instrumentation Sales Representatives www.tm-hittite.com
North America
CT, MA, ME, NH, RI & VT:
PAT Associates
401-783-9598
NJ, NY & E.PA:
Tera Technologies
888-921-8372
AZ, CO, ID, MO, NM, UT & WY:
Technologies West RMS
602-312-3789
CA & NV:
Tritek Solutions
949-609-0560
OR & WA:
Tritek Northwest
949-609-0560
Europe
Belgium, Luxembourg & Netherlands:
AR Benelux B.V.
+31-172-423-000
Finland, Lithuania, Latvia & Estonia:
Caltest Oy
358 9 530 607 0 Greece:
Vector Technologies, LTD
+30-210-68-58-008
Asia
Spain:
AFC Ingenieros, S.A.
+34 91 365 44 05 Turkey:
Spark Olcum Teknolojileri Ltd. Sti
+90 (312) 466 821
United Kingdom:
MCS Test Equipment LTD
08453 62 63 65
China:
WAT-COM Technologies
86-755-86233486
Taiwan R.O.C.:
T&E Communication
886-2-82211258
Japan:
Farad
+82-3-5261-3091
Russian Federation:
Radiant-Elcom Ltd.
+7(495) 725-0404
Order On-line at: www.hittite.com
© 2012, Hittite Microwave Corporation, All Rights Reserved.
2 Elizabeth Drive • Chelmsford, MA 01824 • 978-250-3343 tel • 978-250-3373 fax
Boston • Hyderabad • London • Munich • Seoul • Shanghai • Stockholm • Tokyo
Receive the latest product releases at www.hittite.com - click on “My Subscription”
Scan here to go to
www.hittite.com
Ref.# NL-0212