Electric Infrared Heating Controls
Pre-Wired Contactor Panels
• Factory pre-wired for quick installation,
• Step-down transformer and secondary
with the following optional equipment:
fusing for 24V or 120V control circuit.
Snow & Ice Detector (APS-3C)
• 3-Phase load rated.
Single & Two-Stage Thermostats
• Fuses are NOT included.
Two-stage thermostats require a
• NEMA 1 Enclosures.
minimum 2-contactors.
• Max 50-Amp branch circuit fusing.
Note: Contact factory for 3R, 4, 4X, & NEMA 12 “special” built models.
IMPORTANT FUSING INFORMATION
Fuses are NOT included since panels can be used with various infrared heat sources. Quartz
Lamp Heat Sources: Use FRS-600V (or equal) “Time Delay” fuses; Class RK-5. Quartz Tube
& metal Sheath Heat Sources: Use KTS-R 600V (or equal) “Fast Acting” fuses; Class RK-1.
Fuse circuits as close to calculated load as possible. Circuits less than 35 Amps will require the
use of fuse reducers.
FPC2120
Manufactured in U.S.A.
120-V Control System
UPC#
686334
4459902
4460002
4460102
4460202
4460302
4460402
4460502
4460602
4460702
4460802
4460902
4461002
4461102
4461202
4461302
4461402
Model
FPC8110
FPC2110
FPC7110
FPC4110
FPC8120
FPC2120
FPC7120
FPC4120
FPC8140
FPC2140
FPC7140
FPC4140
FPC8160
FPC2160
FPC7160
FPC4160
24-V Control System
UPC#
686334
4864302
4864402
4864502
4864602
4864702
4864802
4864902
4865002
4865102
4865202
4865302
4865402
4865502
4865602
4865702
4865802
Cabinet Size (In.)
Max. Amps
Model
FPC8210
FPC2210
FPC7210
FPC4210
FPC8220
FPC2220
FPC7220
FPC4220
FPC8240
FPC2240
FPC7240
FPC4240
FPC8260
FPC2260
FPC7260
FPC4260
50
100
200
300
Volts
Depth
Width
Height
WT.
(Lbs.)
6.75
16
24
52
6.75
16
24
70
6.75
24
30
88
6.75
30
36
106
208
240
277/480
480
208
240
277/480
480
208
240
277/480
480
208
240
277/480
480
LIST
1752
1891
1752
2142
2336
2142
3143
3337
3143
3865
4061
3865
Portable Electric Infrared Heat Panels
Features
• Portable panels are built to withstand rigors of industrial and heavy-commercial applications,
such as auto collision repair shops.
• 20 Gauge Steel frame, base, and housing construction.
• 3” Steel casters for high stability and ease of mobility
• Gold anodized Aluminum reflectors and end caps allow 10% faster cure time than polished
Aluminum reflectors, especially in paint and dust-laden atmospheres.
• Elements achieve full temperature in less than 2 minutes
• Fused disconnect switches are installed on the back of each unit.
• Units are positioned with adjustable hinges allowing the user to use direct heat more precisely
to the target area.
• Gentle but effective medium-wave radiant heat can quickly boost, flash-off, or cure a variety
of finishes, and lessens the chance of blistering and/or overheating the coating.
• Medium-wave infrared heating elements are also effective for flash-off of water-based clear
coatings being mandated by environmental agencies in many states.
HP-5-QT
HP-11-QT
General Curing Guidelines
Solvent Based
Water Based Two Component Water Based
Acrylic enamel &
Urethane Clear Coat &
Primer
Primer
Primer
Clear Coat
Polyurethane Clear Coat
High Solids Top Coat
Curing Time
3-5 mins
3-6 mins
8-20 mins
3-10 mins
12-30 mins
10-30 mins
Note: Curing times will vary depending on material and shop conditions. This chart is based on distances of 18-24” away from the target area.
Material Type
Standard Models
UPC#
686334
884129
884136
884143
Model
HP-5-QT
HP-6-QT
HP-11-QT
WATTS VOLTS AMPS
4,800
6,400
11,200
240
20
26.7
46.7
Dimension (In.)
HEAT
CABLE
SOURCES TYPE (20’) Width Height
4
44-5/8
12-3 SO
56-1/2
4
66-5/8
7
6-3 SO
89-1/2
Heated Area (In.)
Wt. LIST
Width Height
40
116 2725
44
141 3150
61
77
225 5800
75