Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
ZA Varistor Series
RoHS
Description
The ZA Series of transient voltage surge suppressors
are radial leaded varistors (MOVs) designed for
use in the protection of low and medium-voltage
circuits and systems. Typical applications include
motor control, telecom, automotive systems,
solenoid, and power supply circuits to protect circuit
board components and maintain data integrity.
These devices are available in five model sizes:
5mm, 7mm, 10mm, 14mm and 20mm, and feature
a wide VDC voltage range of 5.5V to 615V.
See ZA Series Device Ratings and Specifications
Table for part number and brand information.
Agency Approvals
Agency
Agency Approval
Agency File
Number
UL144*
E320116
CECC 42201-006
IEC 61051-1
IEC 61051-2
IEC 60950-1 (Annex Q)**
116895
CECC 42201-006
IEC 61051-1
IEC 61051-2
IEC 60950-1 (Annex Q)**
E1273/F
Notes:
* - Except parts V8ZAxxP and V12ZAxxP.
** - For 14mm (V120 to V180) and 20mm (V120 to V180).
Features
• Lead–free, HalogenFree and RoHS
compliant
• 5 model sizes
available: 5, 7, 10,
14, and 20mm
• Wide operating voltage
range VM(AC)RMS
4V to 460V
• Radial lead package for
hard-wired or printed
circuit board designs
• DC voltage ratings
5.5V to 615V
• Available in tape and
reel or bulk pack
• No derating up to
85ºC ambient
• Standard lead
form options
Additional Information
Datasheet
Resources
Samples
Absolute Maximum Ratings
• For ratings of individual members of a series, see Device Ratings and Specifications chart
Continuous
ZA Series
Units
Steady State Applied Voltage:
AC Voltage Range (VM(AC)RMS)
DC Voltage Range (VM(DC))
4 to 460
V
5.5 to 615
V
50 to 6500
A
Transients:
Peak Pulse Current (ITM)
For 8/20µs Current Wave (See Figure 2)
Single Pulse Energy Range (Note 1)
0.1 to 52
J
Operating Ambient Temperature Range (TA)
For 10/1000µs Current Wave (WTM)
-55 to +85
ºC
Storage Temperature Range (TSTG)
-55 to +125
ºC
Temperature Coefficient (aV) of Clamping Voltage (VC) at Specified Test Current
<0.01
%/ºC
Hi-Pot Encapsulation (COATING Isolation Voltage Capability)
(Dielectric must withstand indicated DC voltage for one minute per MIL–STD–202, Method 301)
2500
V
COATING Insulation Resistance
1000
MΩ
CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any
other conditions above those indicated in the operational sections of this specification is not implied.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
ZA Series Ratings & Specifications
Part
Number
Branding
Maximum Rating (85°C)
Specifications (25°C)
Continuous
Transient
Maximum
Varistor Voltage at
Clamping
Peak
1mA
Energy 10
Voltage
VDC
Current
VRMS
Model Size
DC Test Current
x 1000µs
8 x 20µs
8 x 20µs
Disc Dia. (mm)
VNOM
VNOM
VM(DC)
WTM
ITM
IPK
VC
VM(AC)
Min
Max
(V)
(V)
(J)
(A)
(V)
(V)
(V)
(A)
5
4
5.5
0.1
50
6
11
30
1
7
4
5.5
0.4
100
6
11
22
2.5
10
4
5.5
0.8
250
6
11
20
5
5
6
8
0.14
50
9
16
37
1
7
6
8
0.6
100
9
16
34
2.5
10
6
8
1.2
250
9
16
30
5
5
10
14
0.17
100
16.2
19.8
36
1
7
10
14
0.8
250
16.2
19.8
36
2.5
10
10
14
1.5
500
16.2
19.8
36
5
14
10
14
3.5
1000
16.2
19.8
36
10
20
10
14
10
2000
16.2
19.8
37
20
80
16.2
2000
19.8
37
20
20
10
14
V8ZA05P
V8ZA1P
V8ZA2P
V12ZA05P
V12ZA1P
V12ZA2P
V18ZA05P
V18ZA1P
V18ZA2P
V18ZA3P
V18ZA20P
PZ08
P08Z1
P08Z2
PZ12
P12Z1
P12Z2
PZ18
P18Z1
P18Z2
P18Z3
P18Z20
V18ZA40P
P18Z40
V22ZA05P
V22ZA1P
V22ZA2P
V22ZA3P
V24ZA20P
PZ22
P22Z1
P22Z2
P22Z3
P24Z20
5
7
10
14
20
14
14
14
14
14
V24ZA50P
P24Z50
20
14
V27ZA05P
V27ZA1P
V27ZA2P
V27ZA4P
V27ZA20P
V27ZA60P
V33ZA05P
V33ZA1P
V33ZA2P
V33ZA5P
V33ZA20P
PZ27
P27Z1
P27Z2
P27Z4
P27Z20
P27Z60
PZ33
P33Z1
P33Z2
P33Z5
P33Z20
5
7
10
14
20
20
5
7
10
14
20
V33ZA70P
P33Z70
V36ZA20P
(Note2)
18
18
18
18
18
18
0.2
0.9
2
4
12
100
(Note 4)
(Note 2)
17
17
17
17
17
17
20
20
20
20
20
22
22
22
22
22
22
26
26
26
26
26
20
21
27
0.25
1
2.5
5
14
100 (Note 2)
0.3
1.2
3
6
18
100
P36Z20
20
23
28
V36ZA80P
P36Z80
20
23
28
V39ZA05P
V39ZA1P
V39ZA3P
V39ZA6P
V39ZA20P
V47ZA05P
V47ZA1P
V47ZA3P
V47ZA7P
PZ39
P39Z1
P39Z3
P39Z6
P39Z20
PZ47
P47Z1
P47Z3
P47Z7
5
7
10
14
20
5
7
10
14
25
25
25
25
25
30
30
30
30
V47ZA20P
P47Z20
20
30
31
31
31
31
31
38
38
38
38
38
0.3
1.2
3
7.2
20
0.4
1.8
4.5
8.8
23
(Note 6)
(Note 7)
(Note 2)
20
100
(Note 2)
Typical
Capacitance
f = 1MHz
C
(pF)
2000
4190
7000
1700
3350
6100
1400
2700
5300
18870
22000
22000
100
250
500
1000
2000
19.8
19.8
19.8
19.8
19.8
24.2
24.2
24.2
24.2
24.2
43
43
43
43
43
1
2.5
5
10
20
1220
2375
4500
14730
18000
2000
20.7
25.3
43
20
18000
100
250
500
1000
2000
2000
100
250
500
1000
2000
24.3
24.3
24.3
24.3
24.3
29.7
29.7
29.7
29.7
29.7
29.7
29.7
29.7
29.7
29.7
29.7
36.3
36.3
36.3
36.3
36.3
53
53
53
53
53
50
65
65
65
65
65
1
2.5
5
10
20
20
1
2.5
5
10
20
920
1875
3850
11480
13000
13000
790
1620
3495
9290
13000
2000
29.7
36.3
58
20
13000
2000
32.4
39.6
70
20
12000
2000
32.4
39.6
63
20
12000
100
250
500
1000
2000
100
250
500
1000
35.1
35.1
35.1
35.1
35.1
42.3
42.3
42.3
42.3
42.9
42.9
42.9
42.9
42.9
51.7
51.7
51.7
51.7
79
79
76
76
76
93
93
93
93
1
2.5
5
10
20
1
2.5
5
10
675
1350
3100
7000
12000
585
1245
2590
6270
2000
42.3
51.7
93
20
11000
24.3
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
ZA Series Ratings & Specifications (Continued...)
Part
Number
V56ZA05P
V56ZA2P
V56ZA3P
V56ZA8P
V56ZA20P
V68ZA05P
V68ZA2P
V68ZA3P
V68ZA10P
V68ZA20P
V82ZA05P
V82ZA2P
V82ZA4P
V82ZA12P
V82ZA20P
V100ZA05P
V100ZA3P
V100ZA4P
V100ZA15P
V100ZA20P
V120ZA05P
V120ZA1P
V120ZA4P
V120ZA6P
V120ZA20P
V150ZA05P
V150ZA1P
V150ZA4P
V150ZA8P
V150ZA20P
V180ZA05P
V180ZA1P
V180ZA5P
V180ZA10P
V180ZA20P
V205ZA05P
V220ZA05P
†
V240ZA05P
†
V270ZA05P
†
V330ZA05P
†
V360ZA05P
†
V390ZA05P
†
V430ZA05P
†
V470ZA05P
†
V620ZA05P
†
V680ZA05P
†
V715ZA05P
†
V750ZA05P
Branding
PZ56
P56Z2
P56Z3
P56Z8
P56Z20
PZ68
P68Z2
P68Z3
P68Z10
P68Z20
PZ82
P82Z2
P82Z4
P82Z12
P82Z20
PZ100
P100Z
P100Z4
P100Z15
P100Z20
PZ120
P120Z
P120Z4
P120Z6
P120Z20
PZ150
PZ051
P150Z4
P150Z8
P150Z20
PZ180
P180Z
P180Z5
P180Z10
P180Z20
PZ205
PZ220
PZ240
PZ270
PZ330
PZ360
PZ390
PZ430
PZ470
PZ620
PZ680
PZ715
PZ750
Maximum Rating (85°C)
Specifications (25°C)
Continuous
Transient
Maximum
Varistor Voltage at
Clamping
Peak
1mA
Energy 10
Voltage
VDC
Current
VRMS
Model Size
DC
Test
Current
x 1000µs
8 x 20µs
8 x 20µs
Disc Dia. (mm)
VNOM
VNOM
VM(DC)
WTM
ITM
IPK
VC
VM(AC)
Min
Max
(V)
(V)
(J)
(A)
(V)
(V)
(V)
(A)
5
35
45
0.5
100
50.4
61.6
110
1
7
35
45
2.3
250
50.4
61.6
110
2.5
10
35
45
5.5
500
50.4
61.6
110
5
14
35
45
10
1000
50.4
61.6
110
10
20
35
45
30
2000
50.4
61.6
110
20
5
40
56
0.6
100
61.2
74.8
135
1
7
40
56
3
250
61.2
74.8
135
2.5
10
40
56
6.5
500
61.2
74.8
135
5
14
40
56
13
1000
61.2
74.8
135
10
20
40
56
33
2000
61.2
74.8
135
20
5
50
68
2
400
73.8
90.2
135
5
7
50
68
4
1200
73.8
90.2
135
10
10
50
68
8
2500
73.8
90.2
135
25
14
50
68
15
4500
73.8
90.2
145
50
20
50
68
25
6500
73.8
90.2
145
100
5
60
81
2.5
400
90
110
165
5
7
60
81
5
1200
90
110
165
10
10
60
81
10
2500
90
110
165
25
14
60
81
20
4500
90
110
175
50
20
60
81
30
6500
90
110
175
100
5
75
102
3
400
108
132
205
5
7
75
102
6
1200
108
132
205
10
10
75
102
12
2500
108
132
200
25
14
75
102
22
4500
108
132
210
50
20
75
102
33
6500
108
132
210
100
5
92
127
4
400
135
165
250
5
7
95
127
8
1200
135
165
250
10
95
127
15
2500
135
165
250
25
10
14
95
127
20
4500
135
165
250
50
20
95
127
45
6500
135
165
250
100
5
110
153
5
400
162
198
295
5
7
115
153
10
1200
162
198
300
10
10
115
153
18
2500
162
198
300
25
14
115
153
35
4500
162
198
300
50
20
115
153
52
6500
162
198
300
100
5
130
170
5.5
400
184.5
225.5
340
5
5
140
180
6
400
198
242
360
5
5
150
200
7
400
216
264
395
5
5
175
225
7.5
400
243
297
455
5
5
210
275
9
400
306
374
540
5
5
230
300
9.5
400
324
396
595
5
5
250
330
10
400
351
429
650
5
5
275
369
11
400
387
473
710
5
5
300
385
12
400
423
517
775
5
5
385
505
13
400
558
682
1025
5
5
420
560
14
400
612
748
1120
5
5
440
585
15.5
400
643.5
786.5 1180
5
5
460
615
17
400
675
825
1240
5
Note:
1. Average power dissipation of transients not to exceed 0.2W, 0.25W, 0.4W, 0.6W or 1W for
model sizes 5mm, 7mm, 10mm, 14mm and 20mm, respectively.
2.Energy rating (auto load dump) for impulse duration of 40ms minimum to one half of peak
current, 60 sec interval (ISO7637-2 pulse 5a and ISO16750-2 Table 5A)
3.10mA DC test current.
4.Also rated to withstand 24V for 5 minutes.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
Typical
Capacitance
f = 1MHz
C
(pF)
500
1035
2150
4840
10000
400
910
1850
3870
9000
355
700
1485
3380
7000
310
600
1200
2900
6500
250
515
1100
2450
5000
190
460
860
1910
3500
100
320
465
1190
2400
100
95
90
75
70
60
80
75
70
45
40
35
30
5.Higher voltages available, contact Littelfuse.
6. Also rated to withstand 48V for 5 minutes.
7. Energy rating for impulse duration of 30ms minimum to one half of peak current (Auto
Load Dump): 100J
8. The typical capacitance rating is the discrete component test result.
† Also Recognized to UL 1449, Transient Voltage Surge Suppressors File E320116
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
Phenolic Coating Option -- ZA Series Varistors for HiTemperature Operating Conditions:
Copper Electrode Option:
• Add 'W' to the end of the part
number (e.g. V240ZA05PW)
• Phenolic coated ZA Series devices are available with
improved maximum operating temperature of 125°C
• Copper electrode option is only available
for V240~V750 for ZA series.
• These devices also have improved temperature
cycling performance capability
• Product marking:
• Ratings and specifications are as per standard
ZA Series except Hi–Pot Encapsulation
(Isolation Voltage Capability) = 500V
LF 9
PZ240W
YYWW
Lead-Free,
Halogen-Free
& RoHS Compliant
Indicator
Copper Electrode
Option
Identifier
• To order: add 'X1347' to part number
(e.g. V22ZA3PX1347)
• These devices are not UL, VDE or CECC certified
• Contact factory for further details
• Product marking:
LF 9
P22P3
Lead-Free,
YYWW
Halogen-Free
& RoHS Compliant
Indicator
Phenolic Coated
Option
Identifier
Current Energy and Power Dissipation Ratings
device. The operating values of a MOV need to be derated
at high temperatures as shown above. Because varistors
only dissipate a relatively small amount of average power
they are not suitable for repetitive applications that involve
substantial amounts of average power dissipation.
Should transients occur in rapid succession, the average
power dissipation is the energy (watt-seconds) per pulse
times the number of pulses per second. The power so
developed must be within the specifications shown on the
Device Ratings and Specifications Table for the specific
Figure 1B - Power Derating for Phenolic Coated
100
100
90
90
PERCENT OF RATED VALUE
PERCENT OF RATED VALUE
Figure 1A - Power Derating for Epoxy Coated
80
70
60
50
40
30
20
80
70
60
50
40
30
20
10
10
0
-55
50
60
70
80
90 100 110 120
AMBIENT TEMPERATURE ( oC)
130
0
-55
140 150
70
80
90
100
110
120
130
140 150
FIGURE 1. CURRENT, ENERGY AND POWER DERATING
CURVE
FIGURE 1. CURRENT, ENERGY AND POWER DERATING
PERCENT OF PEAK VALUE
60
AMBIENT TEMPERATURE ( oC)
Peak Pulse Current
CURVETest Waveform
100
01 = Virtual Origin of Wave
T = Time from 10% to 90% of Peak
T1 = Rise Time = 1.25 x T
T2 = Decay Time
Example - For an 8/20 µs Current Waveform:
8µs = T1 = Rise Time
20µs = T2 = Decay Time
90
50
10
O1
Figure 2
50
T
T1
TIME
T2
O1 = Virtual Origin of Wave
T = Time From 10% to 90% of Peak
T1 = Virtual Front time = 1.25 • t
T2 = Virtual Time to Half Value (Impulse Duration)
Example: For an 8/20µs Current Waveform:
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
Maximum Clamping Voltage for 5mm Parts
V8ZA05(P) - V68ZA05(P)
2000
200
100
90
80
70
60
50
40
V68ZA05(P)
V56ZA05(P)
V47ZA05(P)
V39ZA05(P)
V33ZA05(P)
V27ZA05(P)
30 V22ZA05(P)
V18ZA05(P)
20 V12ZA05(P)
MAX CLAMPING VOLTAGE
MODEL SIZE 5mm
82 TO 330VN(DC) RATING
TA = -55oC TO 85oC
V330ZA05(P)
V270ZA05(P)
V240ZA05(P)
V220ZA05(P)
V205ZA05(P)
V180ZA05(P)
V150ZA05(P)
V120ZA05(P)
1000
500
)
5(P
A0
0Z
)
0
(P
V1
05
ZA
2
V8
200
V8ZA05(P)
10 2
10 3
Figure 4
FIGURE 3. CLAMPING VOLTAGE FOR V8ZA05(P) - V68ZA05(P)
Figure 5
0.001
0.01
0.1
1
PEAK AMPERES (A)
10
100
FIGURE 5. CLAMPING VOLTAGE FOR V360ZA05(P) - V750ZA05(P)
MAXIMUM CLAMPING VOLTAGE
MAXIMUM PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
1000
Figure 7
4,000
600
500
400
FIGURE
6. CLAMPING
VOLTAGE
FOR V8ZA1(P) - V68ZA2(P)
MAXIMUM
CLAMPING
VOLTAGE
3,000
500
2,000
400
300
MODEL SIZE 10mm
82 TO 180VN(DC) RATING
TA = -55oC TO 85oC
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
8 TO 68VN(DC) RATING
TA = -55oC TO 85oC
1,000
200
900
800
V180ZA5(P)
700
V150ZA4(P)
© 2015 Littelfuse,
Inc.
600
V120ZA4(P)
Specifications are
subject
to
change
without
notice.
500
100
V100ZA4(P)
90
Revised: 07/20/15
400
80 V68ZA3(P) V82ZA4(P)
70 V56ZA3(P)
300
60 V47ZA3(P)
50
V750ZA05(P)
V715ZA05(P)
V680ZA05(P)
V620ZA05(P)
V470ZA05(P)
V430ZA05(P)
V390ZA05(P)
V360ZA05(P)
10 -1
10 0
10 1
PEAK AMPERES (A)
0.001
500
400
300
10 2
10 3
0.01
0.1
1
PEAK AMPERES (A)
10
100
300
200
100
90
80
70
60
50
10
10
10
10
PEAK AMPERES (A)
10
10 3
V180ZA5(P)
V150ZA4(P)
V120ZA4(P)
200
100
90
80 V68
70 V56
60 V47
50 V39
40 V33
V27
30 V22
V18
20 V12
FIGUR
500
400
300
M
M
8
T
200
100
90
80
70
60
50
40
V68
V56
V47
V39
V33
V27
30 V22
V18
20
V12
V8
10
-3
10
10 4
MAXIMUM
CLAMPING
VOLTAGE
FIGURE
7. CLAMPING
VOLTAGE FOR V82ZA2(P) - V180ZA1(P)
MODEL SIZE 14mm
18 TO 68VN(DC) RATING
TA = -55oC TO 85oC
4,000
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
3,000
82 TO 180VN(DC) RATING
TA = -55oC TO 85oC
2,000
V68ZA10(P)
1,000
900
V56ZA8(P)
800
V47ZA7(P)
700
V39ZA6(P)
600
M
M
8
T
V8
10
10 -3
1000
500
MAXIMUM CLAMPING VOLTAGE
400
MODEL
SIZE 5.
10mm
V82ZA2(P)
- V180ZA1(P)
FIGURE
CLAMPING VOLTAGE FOR V360ZA05(P) - V750ZA05(P)
8 TO 68VN(DC) RATING
300
TA = -55oC TO 85oC
4,000
200
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
3,000
82 TO 180VN(DC) RATING
TA = -55oC TO 85oC
2,000
100
90
80 V68ZA3(P)
70 V56ZA3(P)
60 V47ZA3(P)
1,000
50 V39ZA3(P)
900
40 V33ZA2(P)
800
V180ZA1(P)
V27ZA2(P)
700
30 V22ZA2(P)
V150ZA1(P)
600
V18ZA2(P)
V120ZA1(P)
500
V100ZA3(P)
20
400
V12ZA2(P)
V82ZA2(P)
300
V8ZA2(P)
10
200
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3
PEAK AMPERES (A)
10
Figure 6
V360ZA05(P) - V750ZA05(P)
1000
MAX CLAMPING VOLTAGE
MODEL SIZE 5mm
360 TO 750VN(DC) RATING
TA = -55oC TO 85oC
FIGURE 8.100
CLAMPING
VOLTAGE
FOR V8ZA2(P)
- V68ZA3(P)
-3
-2
-1
0
1
2
AXIMUM PEAK VOLTS (V)
100
MAXIMUM PEAK VOLTS (V)
M PEAK VOLTS (V)
10
100
2000
90
80 V68ZA2(P)
70 V56ZA2(P)
60 V47ZA1(P)
50 V39ZA1(P)
40 V33ZA1(P)
V27ZA1(P)
30 V22ZA1(P)
1000
V18ZA1(P)
20 V12ZA1(P)
0.0001
MODEL SIZE 7mm
V8ZA1(P)3,000
- V68ZA2(P)
300
1,000
900
200
800
V180ZA1(P)
700
V150ZA1(P)
600
V120ZA1(P)
500
100
V100ZA3(P)
400
90
80 V68ZA2(P) V82ZA2(P)
300
70 V56ZA2(P)
60 V47ZA1(P)
50 V39ZA1(P)
200
40 V33ZA1(P)
V27ZA1(P)
30 V22ZA1(P)
100 V18ZA1(P)
20-3V12ZA1(P)
10
10 -1
10 0
10 1
10 2
10 3
10 4
10 -2
PEAK AMPERES (A)
V8ZA1(P)
10
FIGURE
7. CLAMPING
VOLTAGE FOR
V82ZA2(P)
- V180ZA1(P)
-3
10
10 -2
10 -1
10 0
10 1
10 2
10 3
PEAK AMPERES (A)
100
FIGURE 6. CLAMPING VOLTAGE FOR V8ZA1(P) - V68ZA2(P)
Maximum
Clamping Voltage for 7mm Parts
4,000
2,000
500
400
200
V8ZA1(P)
10
-3
10
10 -2
500
1000
82 TO 180VN(DC) RATING
TA = -55oC TO 85oC
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
8 TO 68VN(DC) RATING
TA = -55oC TO 85oC
0.1
1
10
PEAK AMPERES (A)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
8 TO 68VN(DC) RATING
TA = -55oC TO 85oC
3000
MAXIMUM PEAK VOLTS (V)
500
0.0001
0.01
MAXIMUM PEAK VOLTS (V)
V750ZA05(P)
V715ZA05(P)
V680ZA05(P)
V620ZA05(P)
V470ZA05(P)
V430ZA05(P)
V390ZA05(P)
V360ZA05(P)
300
PEAK VOLTS (V)
1000
500
400
MAX CLAMPING VOLTAGE
MODEL SIZE 5mm
360 TO 750VN(DC) RATING
TA = -55oC TO 85oC
MAXIMUM PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
2000
0.001
FIGURE 4. CLAMPING VOLTAGE FOR V82ZA05(P) - V33ZA05(P)
V360ZA05(P) - V750ZA05(P)
3000
100
0.0001
MAXIMUM PEAK VOLTS (V)
10 -1
10 0
10 1
PEAK AMPERES (A)
MAXIMUM PEAK VOLTS (V)
10 -2
FIGUR
600
500
400
300
EAK VOLTS (V)
10
10 -3
Figure 3
AMPING VOLTAGE
SIZE 5mm
50VN(DC) RATING
C TO 85oC
(A)
V82ZA05(P) - V33ZA05(P)
MAX CLAMPING VOLTAGE
MODEL SIZE 5mm
8 TO 68VN(DC) RATING
TA = -55oC TO 85oC
MAXIMUM PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
600
500
400
300
200
100
1,000
Radial Lead Varistors > ZA Series
600
500
400
300
200
100
10 -3
10 -3
10 -2
10 -1
10 0
10 1
PEAK AMPERES (A)
10 2
10 -2
10 -1
10 0
10 1
PEAK AMPERES (A)
10 2
10 3
100
90
80
70
60
50
40
V68ZA3(P)
V56ZA3(P)
V47ZA3(P)
V39ZA3(P)
V33ZA2(P)
V27ZA2(P)
30 V22ZA2(P)
V18ZA2(P)
20
V12ZA2(P)
V8ZA2(P)
10
10 -3
10 -2
10 4
FIGURE 7. CLAMPING VOLTAGE FOR V82ZA2(P) - V180ZA1(P)
FIGURE 8. CLAM
V82ZA4(P) - V180ZA5(P)
4,000
600
500
400
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 10mm
82 TO 180VN(DC) RATING
TA = -55oC TO 85oC
3,000
2,000
1,000
900
800
700
600
500
400
V180ZA5(P)
V150ZA4(P)
V120ZA4(P)
V100ZA4(P)
V82ZA4(P)
200
100
10 -3
Figure 9
10 -2
10 -1
10 0
10 1
PEAK AMPERES (A)
10 2
10 3
200
100
90
80
70
60
50
40
V68ZA10(P)
V56ZA8(P)
V47ZA7(P)
V39ZA6(P)
V33ZA5(P)
V27ZA4(P)
30 V22ZA3(P)
V18ZA3(P)
20
10 -3
10 -2
10 4
FIGURE 9. CLAMPING VOLTAGE FOR V82ZA4(P) - V180ZA5(P)
10 3
MAXIMUM C
MODEL SIZE
18 TO 68VN(D
TA = -55oC TO
300
300
FIGURE
8. CLAMPING VOLTAGE FOR V8ZA2(P) - V68ZA3(P)
10
10 4
V180ZA1(P)
V150ZA1(P)
V120ZA1(P)
V100ZA3(P)
V82ZA2(P)
MAXIMUM PEAK VOLTS (V)
PEAK
MAXIMUMMAXIMUM
PEAK VOLTS
(V) VOLTS (V)
10 3
MAXIMUM PEAK VOLTS
Metal-Oxide Varistors900
800(MOVs)
700
V8ZA2(P)
V180ZA1(P)
MAXIMUM PEAK VOLTS
PEAK
MAXIMUMMAXIMUM
PEAK VOLTS
(V) VOLTS
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 7mm
8 TO 68VN(DC) RATING
300
TA = -55oC TO 85oC
100
90
200
80 V68ZA2(P)
70 V56ZA2(P)
60 V47ZA1(P)
50
100 V39ZA1(P)
40
90 V33ZA1(P)
V68ZA2(P)
80 V27ZA1(P)
30
70 V22ZA1(P)
V56ZA2(P)
60 V18ZA1(P)
V47ZA1(P)
50 V12ZA1(P)
20
V39ZA1(P)
40 V33ZA1(P)
V27ZA1(P)
30 V22ZA1(P)
V8ZA1(P)
10 V18ZA1(P)
00
1000
20
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3
V12ZA1(P)
PEAK AMPERES
(A)
Maximum Clamping Voltage
for 10mm
Parts
V8ZA1(P)
10
V750ZA05(P)V8ZA2(P) -FIGURE
6. CLAMPING
VOLTAGE0 FOR V8ZA1(P)
- V68ZA2(P)
V68ZA3(P)
-3
00
1000
10
10 -2
10 -1
10
10 1
10 2
10 3
PEAK AMPERES (A)
500
MAXIMUM CLAMPING VOLTAGE
400
MODEL
SIZE 10mm VOLTAGE FOR V8ZA1(P) - V68ZA2(P)
V750ZA05(P)
FIGURE
6. CLAMPING
8 TO 68VN(DC) RATING
300
TA = -55oC TO 85oC
500
200
MAXIMUM CLAMPING VOLTAGE
400
MODEL SIZE 10mm
8 TO 68VN(DC) RATING
300
TA = -55oC TO 85oC
100
90
200
V68ZA3(P)
80
70 V56ZA3(P)
60 V47ZA3(P)
50 V39ZA3(P)
100 V33ZA2(P)
40
90
V68ZA3(P)
80 V27ZA2(P)
30
70 V22ZA2(P)
V56ZA3(P)
60 V18ZA2(P)
V47ZA3(P)
50 V39ZA3(P)
20
V33ZA2(P)
40 V12ZA2(P)
V27ZA2(P)
30 V22ZA2(P)
V8ZA2(P)
10 V18ZA2(P)
-3
10 3
10 4
20
10
10 -2
10 -1
10 0
10 1
10 2
10 3
V12ZA2(P)
PEAK AMPERES (A)
Figure 8
400
MAXIMUM PEAK VOLTS (V)
GE
NG
FIGURE 10. CLAMP
Maximum Clamping Voltage for 14mm Parts
10 3
10 4
V180ZA5(P)
4,000
1,000
900
800
700
600
500
400
V180ZA10(P)
V150ZA8(P)
V120ZA6(P)
V100ZA15(P)
V82ZA12(P)
300
MAXIMUM C
MODEL SIZE
18 TO 36VN(D
TA = -55oC TO
200
MAXIMUM PEAK VOLTS (V)
2,000
MAXIMUM PEAK VOLTS (V)
300
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 14mm
82 TO 180VN(DC) RATING
TA = -55oC TO 85oC
3,000
200
100
90
80
70
60
V36ZA20(P) V
V33ZA20(P) V
V27ZA60(P) V
V24ZA50(P) V
V18ZA40P(P) V
50
40
30
100
10 -3
Figure 11
10 -2
10 -1
10 0
10 1
10 2
PEAK AMPERES (A)
10 3
20
10 -3
10 4
FIGURE 11. CLAMPING VOLTAGE FOR V82ZA12(P) - V180ZA10(P)
10 -2
FIGURE 12. CLAMPI
FIGURE 10. CLAMPING VOLTAGE FOR V18ZA3(P) - V68ZA10(P)
1,000
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
39 TO 180VM(AC) RATING
500 TA = -55oC TO 85oC
V180ZA20(P)
V150ZA20(P)
V120ZA20(P)
V100ZA20(P)
300
200
V68ZA20(
V56ZA20(P
V47ZA20(P
V39ZA20(P)
100
V82ZA20(P)
50
30
10 -3
10 -2
10 -1
10 0
10 1
PEAK AMPERES (A)
10 2
10 3
1
FIGURE 13. CLAMPING VOLTAGE FOR V39ZA20(P) - V18
Pulse Rating Curves
50
20
10
5
2
10
10 2
10 3
2
100
MODEL SIZE 5mm
V8ZA05(P)
1
10 4 5
10 6
10
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
2
50
URRENT (A)
V180ZA5(P)
Transient V-I Characteristic Curves (Continued)
MAXIMUM PEAKVOLTS (V)
10 4
100
200
90
80 V68ZA10(P)
70 V56ZA8(P)
60 V47ZA7(P)
50 V39ZA6(P)
100
90 V33ZA5(P)
40
80 V68ZA10(P)
70 V27ZA4(P)
V56ZA8(P)
30
60 V22ZA3(P)
V47ZA7(P)
50 V18ZA3(P)
V39ZA6(P)
20
40 V33ZA5(P)
-3
10V27ZA4(P)
10 -2
10 -1
10 0
10 1
10 2
10 3
PEAK AMPERES (A)
30 V22ZA3(P)
V18ZA3(P)
FIGURE
10. CLAMPING VOLTAGE FOR V18ZA3(P) - V68ZA10(P)
20
10 -3
10 -2
10 -1
10 0
10 1
10 2
10 3
PEAK AMPERES (A)
Figure 10
V82ZA12(P) - V180ZA10(P)
URRENT (A)
10 3
600
MAXIMUM
CLAMPING
VOLTAGE
FIGURE
8. CLAMPING
VOLTAGE
FOR V8ZA2(P) - V68ZA3(P)
500
18 TO 68VN(DC) RATING
o
o
TA = -55 C TO 85 C
300
600
MAXIMUM CLAMPING VOLTAGE
500
MODEL SIZE 14mm
200
400
18 TO 68VN(DC) RATING
TA = -55oC TO 85oC
300
MODEL SIZE 14mm
V18ZA3(P)400
- V68ZA10(P)
PEAK
MAXIMUMMAXIMUM
PEAK VOLTS
(V) VOLTS (V)
V180ZA1(P)
20
10 2
10
10 3
1
Radial Lead Varistors > ZA Series
Curves (Continued)
1,000
900
800
700
600
500
400
300
1,000
900
800
700 V180ZA10(P) V180ZA10(P)
600 V150ZA8(P) V150ZA8(P)
500 V120ZA6(P) V120ZA6(P)
400
V100ZA15(P) V100ZA15(P)
V82ZA12(P) V82ZA12(P)
300
200
1,000
900
800
700
600
500
400
A
V36ZA20(P) V36ZA80(P)
V180ZA10(P) V36ZA20(P) V36ZA80(P)
V33ZA20(P) V33ZA70(P)
V150ZA8(P) V33ZA20(P) V33ZA70(P)
V27ZA60(P) V27ZA60(P)
V27ZA60(P)
V27ZA60(P)
100
V120ZA6(P)
100
V24ZA50(P) V24ZA50(P)
90
V24ZA50(P)
V24ZA50(P)
V100ZA15(P)
90
V18ZA40P(P)
80 V18ZA40P(P) V18ZA40P(P)
V82ZA12(P)80 V18ZA40P(P)
70
70
60
60
300
200
200
MAXIMUM
CLAMPING VOLTAGE
MAXIMUM CLAMPING
VOLTAGE
MODEL SIZE MODEL
20mm SIZE 20mm
18
TO
36V
RATING
N(DC)
18 TO200
36VN(DC) RATING
-55oC TO 85oC
T = -55oC TOTA
85=oC
50
40
A
MAXIMUM PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
Metal-Oxide
Varistors (MOVs)
2,000
300
2,000
MAXIMUM PEAK VOLTS (V)
MAXIMUM PEAK VOLTS (V)
MAXIMUM
CLAMPING VOLTAGE
MAXIMUM CLAMPING
VOLTAGE
3,000
MODEL
SIZE MODEL
14mm SIZE 14mm
82 TO
180VN(DC) RATING
RATING
82 TO 180VN(DC)
-55oC TO 85oC
TA =2,000
-55oC TOTA
85=oC
3,000
MAXIMUM PEAK VOLTS (V)
4,000
100
90
80
70
60
V36ZA20(P) V36ZA80(P)
V33ZA20(P) V33ZA70(P)
V27ZA60(P) V27ZA60(P)
V24ZA50(P) V24ZA50(P)
V18ZA40P(P) V18ZA40P(P)
50
40
50
30
40
20
30
30
10 -3
10 -1
10 0
10 1
10 -2
10 4
10 -1
10 0
10 1
10 2
10 3
PEAK AMPERES (A)
Maximum Clamping Voltage for 20mm Parts
PEAK AMPERES (A)
20
100
20
100
-2
-1
0
1 FIGURE
2 12. CLAMPING
3
VOLTAGE
FOR -3
V82ZA12(P)
- V180ZA10(P)
-3
-2
-1
0
1 FIGURE
2 11. CLAMPING
3
10 4 VOLTAGE FOR V18
10 4 V39ZA20(P)
10 -3
10 -110 10 0 10 10 1 10 10 2 10 10 3 10 10 4 10
10 -2-10
V180ZA20(P)
V18ZA20(P) - V36ZA80(P)
10 -210 10 -110 10 0 10 10 1 10 10 2 10 10 3 10 10 4 10
10 -3
PEAK
PEAK
PEAK AMPERES
(A)AMPERES (A)
PEAK AMPERES
(A)AMPERES (A)
200
100
10 -3
10 -2
11. CLAMPING
VOLTAGE
FOR V82ZA12(P)
- V180ZA10(P)
12. CLAMPING
VOLTAGE
FOR V18ZA40(P)
1,000
300
FIGURE
11. FIGURE
CLAMPING
VOLTAGE FOR
V82ZA12(P)
- V180ZA10(P)
FIGURE 12. FIGURE
CLAMPING
VOLTAGE FOR
V18ZA40(P)
- V36ZA80(P)- V36ZA80(P)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
18 TO 36VN(DC) RATING
TA = -55oC TO 85oC
1,000
40
30
(A)
10 2
10 3
20
10 -3
10 4
V82ZA12(P) - V180ZA10(P)
10 -2
10 -1
Figure 11
200
100
50
10 0
10 1
PEAK AMPERES (A)
30
10 2
MAXIMUM PEAKVOLTS (V)
50
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
39 TO 180VM(AC) RATING
500 TA = -55oC TO 85oC
1,000
MAXIMUM
CLAMPING VOLTAGE
MAXIMUM CLAMPING
VOLTAGE
V180ZA20(P)
MODEL SIZE MODEL
20mm SIZE 20mm
39 TO
180VM(AC) RATINGV180ZA20(P) V150ZA20(P)
39 TO 180VM(AC)
RATING
V150ZA20(P) 300
oC TO 85oC
500
o
o
T
=
-55
500 TA = -55 C TO A
85 C
V120ZA20(P) V120ZA20(P)
V100ZA20(P) V100ZA20(P)
200
300
300
MAXIMUM PEAKVOLTS (V)
V36ZA20(P) V36ZA80(P)
V33ZA20(P) V33ZA70(P)
V27ZA60(P) V27ZA60(P)
V24ZA50(P) V24ZA50(P)
V18ZA40P(P) V18ZA40P(P)
100
90
80
70
60
MAXIMUM PEAKVOLTS (V)
MAXIMUM PEAK VOLTS (V)
200
200
100
50
10 3
10 4
V68ZA20(P)
V56ZA20(P)
V47ZA20(P)
V39ZA20(P)
100
V68ZA20(P)
V68ZA20(P)
50
V56ZA20(P) V56ZA20(P)
V47ZA20(P)
V47ZA20(P)
V39ZA20(P)
30
V82ZA20(P) V82ZA20(P)
V39ZA20(P)
10 -3
10 -2
30
V180ZA20(P)
V150ZA20(P)
V120ZA20(P)
V100ZA20(P)
V82ZA20(P)
10 -1
10 0
10 1
PEAK AMPERES (A)
10 2
10 3
10 4
Figure 12
-2
-1
0
1
2 4 13.
-2 10 -3
1010
10 3 CLAMPING
10 4
VOLTAGE FOR V39ZA20(P) - V180ZA20(P)
10 -3
10 -1 10 10 0 10 10 1 10 10 2 1010 3FIGURE
FIGURE 12. CLAMPING VOLTAGE FOR V18ZA40(P)
-10V36ZA80(P)
PEAK
PEAK AMPERES
(A)AMPERES (A)
Pulse13.Rating
Curves
FIGURE
CLAMPING
VOLTAGE FOR V39ZA20(P) - V180ZA20(P)
FIGURE 13. CLAMPING VOLTAGE FOR V39ZA20(P) - V180ZA20(P)
Repetitive Surge Capability for 5mm
Parts
50
2
10
10
10
SURGE CURRENT (A)
SURGE CURRENT (A)
20
1
2
10 4 5
10 6
10
10
10 4
10 5 6
10
10 2
5
V68ZA20(P)
V56ZA20(P)
10 3
10 3 V47ZA20(P)
2
2
V82ZA20(P)
V39ZA20(P)
10 -3
10 -2
5 10 2
1
1
0.5
10 3
10 -1
10 0
10 1 0.5 10 2
PEAK AMPERES (A)
0.2
0.1
20
0.1
20 100
10 3
1
0.5
0.2
10 4
0.2
5 10 2
2
INDEFINITE
0.1
20
10 4
100
100
50
50
10 5 6 1
10
2
SURGE CURRENT (A)
20
2
SIZE 5mm
MODEL SIZE10MODEL
5mm
10
V8ZA05(P)
V8ZA05(P)
SURGE CURRENT (A)
1
20
100
MODEL SIZE 5mm
V18ZA05(P) - V68ZA05(P)
V8ZA05(P)
1
20
10 2
10
10 3
2
1
1
2 15
20
10 2
10
10 3
10 4 5
10 6
10
2
15
5mm
MODEL
SIZE MODEL
5mm
20 SIZE
4
10
10 2
V12ZA05(P)
-V12ZA05(P)
V68ZA05(P) - V68ZA05(P)
10 5 6
3
10
10
10
2
1
INDEFINITE
0.5
0.2
100
15
50
V82ZA05(P) - V750ZA05(P)
1013
200
2
CURVES FOR V8ZA05(P)
MODEL SIZE 5mm
V82ZA05(P) - V750ZA05(P)
0.2
5
100
1,000
INDEFINITEIMPULSE DURATION (μs)
1
10,000
100
Figure 15
1,000
IMPULSE DURATION ( µs)
200
1
2
MODEL SIZE 7mm
V8ZA1(P) - V12ZA1(P)
102
20
103
10
5
2
0.2
10,000
MODEL SIZE 7mm
V18ZA1(P) - V68ZA2(P)
104 5
10 6
10
100 Inc.10
© 2015 Littelfuse,
Specifications are subject
102 to change without notice.
Revised: 07/20/15
50
103
20
10
104 5
10 6
10
INDEFINITE
0.5
FIGURE 16. SURGE CURRENT RATING CURVES FOR
V82ZA05(P) - V750ZA05(P)
500
2
1
FIGURE
15. SURGE CURRENT RATING CURVES FOR
0.5
V12ZA05(P) - V68ZA05(P)
0.2
20
1
100
50
INDEFINITE
0.1
2 20
V12ZA05(P) V12ZA05(P)
- V68ZA05(P)- V68ZA05(P)
20
100
1,000
IMPULSE DURATION ( µs)
10,000
FIGURE 17. SURGE CURRENT RATING CURVES FOR
V8ZA1(P) - V12ZA1(P)
2,000
1,000
500
1
200
100
MODEL SIZE 7mm
V82ZA2(P) - V180ZA1(P)
2
10
RENT (A)
10,000
MODEL SIZE 5mm
V12ZA05(P) - V68ZA05(P)
200
103 4
10 5
10 6
10
100 15
2
50 102
1
20
0.5
10
10 4 5
10 6
10
SURGE CURRENT (A)
10 2
SURGE CURRENT
(A) CURRENT (A)
SURGE
20
RRENT (A)
00
N (μs)
FigureFIGURE
13
FigureSURGE
14
100
FIGURE 14. SURGE CURRENT RATING CURVES FOR V8ZA05(P)
15.
SURGERATING
CURRENT
RATING
CURVES FOR
14.
FIGURE 15. FIGURE
CURRENT
CURVES
FOR
1 SURGE CURRENT RATING CURVES FOR V8ZA05(P)
500
10
MODE
V12ZA
0.1
1,000
10,000
20
100
1,000
0.2
IMPULSE DURATION (μs
IMPULSE DURATION
(μs)
0.2
0.1
0.1
FIGURE
14. SURGE
CURRENT
RATING
FOR
(P)
FIGURE 15. SURGE
CURRENT RATING CU
100
1,000
10,000
20 CURVES
100V8ZA05
1,000
10,000
1,000
10,000
20
100
1,000
10,000
IMPULSE(μs)
DURATION (μs)
IMPULSE
DURATION
(μs)
V12ZA05(P) - V68ZA05(P)
IMPULSE DURATION
IMPULSE DURATION (μs)
INDEFINITE
2
10 4 5
10 6
10
2
INDEFINITE
URE 13. CLAMPING VOLTAGE FOR V39ZA20(P)
- V180ZA20(P)
MODEL SIZE 5mm
V8ZA05(P)
15
1
INDEFINITE
INDEFINITE
0.5
0.5
1
50
SURGE CURRENT (A)
PulseCurves
Rating Curves
Pulse Rating
SURGE CURRENT (A)
MAXIMUM CLAMPING VOLTAGE
MODEL SIZE 20mm
V180ZA20(P)
39 TO 180VM(AC) RATING V8ZA05PV150ZA20(P)
- V12ZA05P
TA = -55oC TO 85oC
V120ZA20(P)
50
50
V100ZA20(P)
102
103
104
105
106
200
10 5
10 6
10
2
15
100
0.5
10
5
1
2
INDEFINITE
0.55
10,000
2
INDEFINITE
1
20
100
0.5
Figure 15
FIGURE 17.
0.2
20
103
10
5
2
INDEFINITE
1,000
IMPULSE DURATION ( µs)
10,000
IMPULSE DURATION ( µs)
20
10,000
100
IMPUL
1
500
2
200
100 102
3
50 10
20
10
INDEFINITE
5
2
100
INDEFINITE
1,000
IMPULSE DURATION ( µs)
SURGE CURRENT RATING CURVES FOR
V8ZA2(P) - V127ZA2(P)
1
1,000
10,000
20
100
1,000
IMPULSE DURATION ( µs)
IMPULSE DURATION ( µs)
1
10,000
10,000
20
100
IMPUL
FIGURE 21. SURGE CURR
V18ZA2(P) - V6
20
Figure 17
100
1,000
IMPULSE DURATION ( µs)
10,000
FIGURE 19. SURGE CURRENT RATING CURVES FOR
V82ZA2(P) - V180ZA1(P)
1,000
500
10
INDEFINITE
3
50 10
20
10
INDEFINITE
5
100
1,000
500
1
1,000
10,000
20
100
1,000
IMPULSE DURATION ( µs)IMPULSE DURATION ( µs)
V82ZA4(P)
- V180ZA5(P)
1
10,000
5,000
100 102
2,000
3
50 10
2
5
2
20
SURGE CURRENT (A)
10
MODEL SIZE 10mm
V82ZA4(P) - V180ZA5(P)
50
20
100
1,000
10
IMPULSE DURA
TION ( µs)
INDEFINITE
10,000
5
FIGURE 21. SURGE CURRENT RATING CURVES FOR
V18ZA2(P) - V68ZA3(P)
2
20
100
1,000
IMPULSE DURATION ( µs)
Figure 20
1
2,000
2
1,000
15
500
200
100
50
500
1
2
100
50
20
10
INDEFINITE
5
2
1
20
10,000
10
V180ZA5
FIGURE 22. SURGE CURRENT RATING CURVES FOR
V82ZA4(P) - V180ZA5(P)
5,000
1,000
15
200 102
104 5
10 6
10
500 15
102
200
103
INDEFINITE 100
20
1
1,000
104
105
106
1
SURGE CURRENT (A)
200
104
105
106
MODEL SIZE 10mm
V18ZA2(P) - V68ZA3(P)
2
2
100 102
10
2
1
20
10,000
MODEL SIZE 10mm
V18ZA2(P) - V68ZA3(P)
1
200
20
FIGURE 23. SURGE
V18ZA
2,000
MODEL SIZE 14mm
V82ZA12(P) - V180ZA10(P)
102 3
10
104
105
© 2015 Littelfuse, Inc.
106
Specifications are subject to change without notice.
Revised: 07/20/15
1,000
GE CURRENT (A)
FIGURE 20. SURGE CURRENT RATING CURVES FOR
1
V8ZA2(P) - V127ZA2(P)
10,000
20
GE CURRENT (A)
SURGE CURRENT (A)
SURGE
SURGE CURRENT
(A)CURRENT (A)
V82ZA2(P)
DEL SIZE 10mm
ZA2(P) - V12ZA2(P)
INDEFINITE
50
100
Figure
19CURRENT
SURGE CURRENT
CURVES
FOR RATING CURVES FOR
FIGURE 19.
SURGE
RATING
CURVES
FORRATING CURVES FOR
FIGURERATING
20. SURGE
CURRENT
FIGURE 21.
SURGE
CURRENT
V82ZA2(P) - V180ZA1(P)
V18ZA2(P) - V68ZA3(P)
MODEL- SIZE
10mm
V18ZA1(P) - V68ZA2(P) V8ZA2(P)
V127ZA2(P)
0.21
V18ZA2(P) - V68ZA3(P)
20
100
1,000
10,000
500
500 2
IMPULSE DURATION ( µs)
MODEL SIZE 10mm
- V180ZA1(P)
1
200
FIGURE
CURVES- V12ZA2(P)
FOR
104RATING
4 V8ZA2(P)
200 2 17. SURGE CURRENT
105 10
5
V8ZA1(P) - V12ZA1(P)
10610
100100
10210
106
2,000
3 2
MODEL SIZE 7mm
50 10 101
V82ZA2(P) - V180ZA1(P)
50
1,000
103
2
20
500
20
103
10
15
104
10 200
105
5 102
106
100
5 2 INDEFINITE
50
INDEFINITE
2 1
20
0.5
1
2010
100
1,000
10,000
IMPULSE DURATION ( µs)
0.2
520 INDEFINITE100
1,000
10,000
IMPULSERATING
DURATION
( µs)
FIGURE 21. SURGE CURRENT
CURVES
FOR
2
V18ZA2(P) - V68ZA3(P)
SURGE CURRENT (A)
RVES FOR
103
104
105
106
15
2
Figure 18
FIGURE
20.
2
SURGE CURRENT (A)
Figure 16
FIGURE 18.
1,000
SIZE 10mm
P) - V12ZA2(P) 10,000
s)
MODEL SIZE 7mm
MODEL SIZE 7mm
V8ZA1(P) - V12ZA1(P) V82ZA2(P) - V180ZA1(P)
102
10
0.2
INDEFINITE 205
5
10,000
0.2
0.5
S FOR
1
INDEFINITE
1,000
0.5 20
2
0.2
2100
SURGE CURRENT (A)
SURGE CURRENT (A)
0.2
10,000
5
IMPULSE DURATION ( µs)
FIGURE
CURRENT
CURVES
FOR 10,0001,000
1
20 19. SURGE100
1,000
20 RATING
100
INDEFINITE
DURATION ( µs) IMPULSE DURATION ( µs)
V82ZA2(P) IMPULSE
- V180ZA1(P)
EL SIZE 7mm
A1(P) - V68ZA2(P)
10
10
V18ZA2(P) - V68ZA3(P)
MODEL SIZE 7mm
FIGURE 16. SURGE CURRENT
CURVES
FIGURE 17. SURGE CURRENT
RATING
CURVES
FOR
V82ZA2(P)
-FOR
V180ZA1(P)
FIGURERATING
18. SURGE
CURRENT
RATING CURVES FOR
FIGURE 19.
SURGE
CURRENT
RATING CURVES FOR
1,000
V82ZA05(P)
V750ZA05(P)
V8ZA1(P) - V12ZA1(P)V82ZA2(P) - V180ZA1(P)
V18ZA1(P) - V68ZA2(P)
2
500
500
2,000
500
1,000
103 MODEL SIZE 7mm
MODEL SIZE 7mm
1
15
4
1
MODEL SIZE
10mm
1 4
10V18ZA1(P)
- V68ZA2(P)
V82ZA2(P) - V180ZA1(P) MODEL SIZE 10mm
1,000
200
1
10
200 2
5
V18ZA2(P) - V68ZA3(P)
4
V8ZA2(P)
V12ZA2(P)
2
500
10 5
200 2 105 6 10 6
10
2
10 6
10
10
500
2
15
100
100
10
10
100
103
200
15
50200 102
104
104
200
102
50
105
2
2
MODEL
SIZE
7mm
105
100
1
10
10
50
3
6
3
106
V8ZA1(P)
V12ZA1(P)
100 10
10
104
2
100
10
20
3
20
20
105 6
50 10
10
50
10
50
1010
10
S FOR
RVES FOR
103
0.5
102
5
5
5 20 INDEFINITE
103
2
10
2
INDEFINITE
2
INDEFINITE
15
1
1
0.5
20
100
1,000
0.5
IMPULSE DURATION ( µs)
2
10,000
100
2
5200
20
FIGURE 19. SURGE CURR
V82ZA2(P) - V1
V18ZA1(P) - V68ZA2(P)
102
2,000
50
1031
21,000 104
20
2 105 6
10
500
10
102
20
50
1
20
V8ZA1(P) - V12ZA1(P)
1
SURGE CURRENT RATING CURVES FOR
0.2
V8ZA1(P)
100 - V12ZA1(P)
1,000100
10,000
20
1,000
V18ZA1(P) - V68ZA2(P)
1
L SIZE 5mm
05(P) - V750ZA05(P)
20
102
1
SURGE CURRENT (A)
SURGE CURRENT (A)
SURGE CURRENT (A)
IZE 7mm
) - V68ZA2(P)
50
0.5
2,000
INDEFINITE
1,000
10,000
MODEL SIZE 10mm
IMPULSE DURA
TIONV8ZA2(P)
( µs)
- V12ZA2(P)
104 5
10 6
FIGURE 17. SURGE CURRENT RATING
CURVES FOR
10
100 10
200
200
MODEL SIZE 7mm
1
MODEL SIZE 5mm
100
4
V18ZA1(P) - V68ZA2(P)
10
V82ZA05(P)
V750ZA05(P)
2
105 6
10
10
50
SURGE CURRENT (A)
S FOR
10,000
SURGE CURRENT (A)
SURGE CURRENT (A)
SURGE CURRENT (A)
SURGE CURRENT (A)
500
1
103 4
10
200 5
10 6
100 10 15
2
20
0.2
1,000
102
100
2
500 0.2
20
1
FIGURE
SURGE CURRENT RATING CURVES FOR
10516.
106 V82ZA05(P) - V750ZA05(P)
2
500 10
20
1
3
10
2
200
10
100 10
5
50 102
10
1
100
MODEL
SIZE 7mm
IMPULSE
DURATION ( µs)
V8ZA1(P) - V12ZA1(P)
104
10
50
5
0.5
SURGE CURRENT (A)
100
15
200
5
V8ZA2(P) - FIGURE
V12ZA2(P)
18. SURGE CURRENT RATING CURVES FOR
0.2
20
SURGE CURRENT (A)
E 5mm
- V750ZA05(P)
10
1
0.5
200
102
INDEFINITE
103
20
100
1,000
2
Repetitive20Surge
Capability
for 10mm
Parts 10,000
IMPULSE DURATION ( µs)
INDEFINITE
1
10
104 5
10 6
10
0.2
Repetitive Surge Capability
for 7mm Parts
2
V8ZA1(P) - V12ZA1(P)
2
5 50
1
20
MODEL SIZE 7mm
V8ZA1(P) - V12ZA1(P)
1
10100
2
SURGE CURRENT (A)
102
MODEL SIZE 5mm
V82ZA05(P) - V750ZA05(P)
SURGE CURRENT (A)
10
50
SURGE CURRENT (A)
103 4
10 5
10 6
10
2
100
103
20200
Radial Lead Varistors > ZA Series
1
200
102
50
SURGE CURRENT (A)
500
SURGE CURRENT (A)
Metal-Oxide Varistors (MOVs)
2
500
2
10
500
102
200
103
100
104
50
105
1
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
Repetitive Surge Capability for 14mm Parts
V82ZA12(P) - V180ZA10(P)
15
100
5,000
50
20
10
INDEFINITE
2
000
N ( µs)
1
20
10,000
V180ZA5
CURVES FOR
100
Figure 21
1,000
IMPULSE DURATION ( µs)
106
DEL SIZE 14mm
ZA12(P) - V180ZA10(P)
4
05
106
10,000
1,000
00
10,000
20
200
10
100
5
50
2
2020
10
2 4 1
105
INDEFINITE
1,000
IMPULSE DURATION ( µs)
103
100
104
50
105
1
10,000
10,000
5,000
10,000
15
1,000
500
102
103
200
104
105
106
100
50
20
10
Figure 24
V120ZA20(P) - V180ZA20(P)
10,000
. 5SURGE CURRENT RATING CURVES FOR V120ZA20(P) - V180ZA20(P)
2
100
1,000
10,000
IMPULSE DURATION ( µs)
SURGE CURRENT RATING CURVES FOR V120ZA20(P) - V180ZA20(P)
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
20
10
5
2
20
FIGURE
100
1
2
1,000
SIZ
IMPULSE DURAMODEL
TION ( µs)
V120ZA20(
FIGURE
25. SURGE CURRENT RATING CURR
2,000
15 V18ZA40(P) - V68ZA20(P)
1,000
102
500
20
INDEFINITE
10
2
1
INDEFINITE
20
100
1,000
IMPULSE DURATION ( µs)
FIGURE 26. SURGE CURRENT RATING CURVES FOR
2
10,000
50 1
5
5
1
200
MODEL S
100
V18ZA40
3
MODEL SIZE10
20mm
200
4
V120ZA20(P)
- V180ZA20(P)
10
100
105
50
106
1
2
2,000
2
10,00020
5,000
20
100
1,000
10,000
IMPULSE DURATION ( µs)
FIGURE 26. SURGE CURRENT RATING CURVES FOR V120ZA20(P) - V180ZA20(P)
NOTE: If pulse ratings are exceeded, a shift of VN(DC)(at specified current) of more then +/-10% could result. This type of shift, which normally results
in a decrease of VN(DC), may result in the device not meeting the original published specifications, but does not prevent the device from continuing to
function,MODEL
and toSIZE
provide
20mmample protection.
4
10
1
5
10
2
106
15
20
100
1,000
IMPULSE DURATION ( µs)
103
INDEFINITE
104
100
200
500
20
100
1,000
10,000
IMPULSE DURATION10
( µs) INDEFINITE
Figure 22
106
102
102 3
10
104
105
2,000106
2
1,000
15
500
102
1,000
5
FIGURE 24. SURGE CURRENT RATING CURVES
FOR
V82ZA12(P) - V180ZA10(P)
MODEL SIZE 20mm
V18ZA40(P) - V68ZA20(P)
105
15
2
100
1,000
MODEL 20
SIZE 20mm
V120ZA20(P) - V180ZA20(P)IMPULSE DURATION ( µs)
00
20
102
00 INDEFINITE
10
103
00
5
104
00
105
2
50
106
1
100
1,000
20 20
INDEFINITE
IMPULSE DURATION ( µs)
10
1
INDEFINITE
103
FIGURE 25. SURGE CURRENT RATING CURRENT FOR
V18ZA40(P) - V68ZA20(P)
102
2
20
10,000
V82ZA12(P) - V180ZA10(P)
Figure 23
103
00
00
00
00
00
50
5
50
20
INDEFINITE
10
V82ZA20(P) - V180ZA20(P)
106 FIGURE 24. SURGE CURRENT RATING CURVES FOR
102
200
2,000
100
1,000
50
500
15
500
100
FIGURE 25. SURGE CURRENT RATING CURRENT FOR
5
V18ZA40(P) - V68ZA20(P)
CURVES
10 FOR
00
00
200
V18ZA40(P) - V68ZA20(P)
10
1,000
2,000
MODEL SIZE 14mm
V82ZA12(P) - V180ZA10(P)
10 3
10 50
104
105
106
20
500
2
2,000
10
CURVES FOR
1
2
15
2
MODEL
200 SIZE 14mm
V82ZA12(P) - V180ZA10(P)
2 100
1 Capability for 20mm Parts 20
Repetitive Surge
2
MODEL SIZE 20mm
SURGE CURRENTSURGE
(A)
CURRENT (A)
05
00
000
00
( µs)
1,000
10
V18ZA40(P)500
- V68ZA20(P)
4
000
( µs)
2
FIGURE 23. SURGE CURRENT RATING CURVES FOR
5
V18ZA3(P) - V68ZA10(P)
DEL SIZE 14mm
2ZA12(P) - V180ZA10(P)
1
2,000
1
2,000
SURGE CURRENT (A)
SURGE CURRENT (A)
200 102
5
5,000
MODEL SIZE 14mm
103
V18ZA3(P) - V68ZA10(P)
104
105
6
10
SURGE CURRENT (A)
1
2
SURGE CURRENT (A)
500
SURGE CURRENT (A)
1,000
SURGE CURRENT (A)
ODEL SIZE 10mm
82ZA4(P) - V180ZA5(P)
SURGE CURRENT (A)
V18ZA3(P) - V68ZA10(P)
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
Wave Solder Profile
Non Lead–free Profile
Lead–free Profile
300
300
250
TEMPERATURE (ºC)
TEMPERATURE (ºC)
Maximum Wave 260C
Maximum Wave 240C
250
200
150
100
200
150
100
50
50
0
0
0
0.5
1
Figure 25
1.5
2
2.5
3
3.5
TIME(MINUTES)
Physical Specifications
4
0
0.5
1
1.5
Figure 26
2
2.5
3
3.5
4
TIME(MINUTES)
Environmental Specifications
Operating Ambient
Temperature Range
-55°C to +85°C
Solderability per MIL–STD–202,
Method 208
Storage Temperature Range
-55°C to +125°C
Insulating Material
Cured, flame retardant epoxy polymer
meets UL94V–0 requirements
Humidity Aging
+85°C, 85% RH,1000 hours
+/-10% typical voltage change
Device Labeling
Marked with LF, voltage, UL/CSA logos,
and date code
Thermal Shock
+85°C to -40°C 5 times
+/-10% typical voltage change
Solvent Resistance
MIL–STD–202, Method 215
Moisture Sensitivity
Level 1, J-STD-020
Lead Material
Copper Clad Steel Wire
Soldering
Characteristics
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
Product Dimensions (mm)
øD
A
CRIMPED AND TRIMMED LEAD
Radial lead types can be supplied with combination
preformed crimp and trimmed leads. This option is
supplied to the dimensions shown.
ATRIM
SEATING
PLANE
e1
*Seating plane interpretation per IEC-717
LTRIM
øb
25.4
(1.00)
MIN
To order this crimped and trimmed lead style,
standard radial type model numbers are
changed by replacing the model letter "ZA" with
"ZC." This option is supplied in bulk only.
e
Example:
E
Standard Model
Order As
V18ZA3P
V18ZC3P
For crimped leads without trimming and any varitions to
the above, contact Littelfuse.
5mm Size
7mm Size
10mm Size
14mm Size
20mm Size
Dimension
VRMS
Voltage
Model
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
Min.
mm (in)
Max.
mm (in)
A
All
-
10 (0.394)
-
12 (0.472)
-
16 (0.630)
-
20 (0.787)
-
26.5
(1.043)
ØD
All
-
7 (0.276)
-
9 (0.354)
-
12.5 (0.492)
-
17 (0.669)
-
23 (0.906)
All
4 (0.157)
6 (0.236)
4 (0.157)
6 (0.236) 6.5 (0.256) 8.5 (0.335) 6.5 (0.256) 8.5 (0.335)
V8ZAV56ZA
1 (0.039)
3 (0.118)
1 (0.039)
3 (0.118)
V68ZAV100ZA
1.5 (0.059)
3.5
(0.138)
1.5 (0.059)
3.5
(0.138)
V120ZAV180ZA
1 (0.039)
3 (0.118)
1 (0.039)
3 (0.118)
1 (0.039)
3 (0.118)
1 (0.038)
3 (0.118)
1 (0.038)
3 (0.118)
V205ZAV750ZA
1.5 (0.059)
3.5
(0.138)
-
-
-
-
-
-
-
-
V8ZAV56ZA
-
5 (0.197)
-
5 (0.197)
-
5 (0.197)
-
5 (0.197)
-
5 (0.197)
V68ZAV100ZA
-
5.6
(0.220)
-
5.6
(0.220)
-
5.6 (0.220)
-
5.6
(0.220)
-
5.6 (0.220)
V120ZAV180ZA
-
5 (0.197)
-
5 (0.197)
-
5 (0.197)
-
5 (0.197)
-
5 (0.197)
V205ZAV750ZA
-
5.6
(0.220)
-
-
-
-
-
-
-
-
Øb
All
0.585
(0.023)
0.685
(0.027)
0.585
(0.023)
0.685
(0.027)
0.76
(0.030)
0.86
(0.034)
0.76
(0.030)
0.86
(0.034)
0.76
(0.030)
0.86
(0.034)
ATRIM
All
-
13.0
(0.512)
-
15 (0.591)
-
19.5 (0.768)
-
22.5
(0.886)
-
29.0
(1.142)
LTRIM
All
2.41
(0.095)
4.69
(0.185)
2.41
(0.095)
4.69
(0.185)
2.41
(0.095)
4.69
(0.185)
2.41
(0.095)
4.69
(0.185)
2.41
(0.095)
4.69
(0.185)
e
(see notes
below)
e1
E
1 (0.039)
3 (0.118)
1 (0.039)
1.5 (0.059) 3.5 (0.138) 1.5 (0.059)
3 (0.118)
3.5
(0.138)
6.5 (0.256) 8.5 (0.335)
(note 1 below) (note 1 below)
1 (0.039)
1.5 (0.059) 3.5 (0.138)
NOTES: Dimensions in millimeters, inches in parentheses.
1. For 20mm size devices, a 10mm "e" dimension option is also available. Please refer to "Ordering Notes" section "X10" option code for additional information.
2.V24ZA50(P) and V24ZC50(P) only supplied with lead spacing of 6.35mm -/+0.5mm (0.25 -/+0.0196) Dimension e = 5.85 min. Does not apply to Tape and Reel parts.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
3 (0.118)
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
Tape and Reel Specifications
5 and 7mm Devices
10, 14 and 20mm Devices
CRIMPED LEADS "ZT"
P2
P2
P2
P2
P2P2
HH1 1
HH
11
H1H1
HH0 0
HH
00
H0H0
CRIMPED LEADS "ZT"
P2
P2
P2
P2
P2P2
EE
EE
DP
DP
E
E
DP
DH
DP DH
DH
DH
DH
DH
DH
DPDP DH
DH
DH
DH
DH
WW
WW
WW
P1
P1
P1
P1 P0
P0
P0
P1P1 P0
P0P0
FF
FF
FF
tt
tt
t t
Crimped
CrimpedLeads
Leads"ZT"
"ZT"
Crimped
CrimpedLeads
Leads"ZT"
"ZT"
Crimped
CrimpedLeads
Leads"ZT"
"ZT"
STRAIGHT LEADS "ZS"
P2
P2
P2
P2
P2P2
PP
PP
DP
DP
P PDP
DP
DPDP
DD0
DD0
DD0
DD0
DD0
DD0
tt
tt
Ho
Ho
Ho
Ho
HoHo
DD0
DD0
DD0
DD0
DD0
DD0
Under-crimped
Under-crimpedLeads
Leads"ZU"
"ZU"
Under-crimped
Under-crimpedLeads
Leads"ZU"
"ZU"
Under-crimped
Under-crimpedLeads
Leads"ZU"
"ZU"
FF
FF
FF
tt
tt
t t
tt
tt
t t
PP
PP
DP
DP
P PDP
DP
EE
EE
DP
DP
DP
DH
DP DH
DH
DH E E
DH
DH
DH
DPDP DH
DH
DH
DH
DH
DD0
DD0
DD0
DD0
DD0
DD0
W0
W0 W2
W2 W1
W1
W0
W0 W2
W2 W1
W1
W0
W0W2
W2W1
W1
Db
Db
Db
Db
DbDb
WW
WW
WW
P1
P1
P1
P1
P1P1
P0
P0
P0
P0
P0P0
P2
P2
P2
P2
P2P2
WW
WW
WW
P1
P1
P1
P1 P0
P0
P0
P1P1 P0
P0P0
FF
FF
FF
FF
FF
FF
tt
tt
t t
Straight
StraightLeads
Leads"ZS"
"ZS"
Straight
StraightLeads
Leads"ZS"
"ZS"
Straight
"ZS"
StraightLeads
Leads
"ZS" CRIMPED LEADS "ZU"
UNDER
UU
UU
UU
W0
W0 W2
W2 W1
W1
W0
W0 W2
W2 W1
W1
W0
W0 W2
W2W1
W1
Db
Db
Db
Db
DbDb
P1
P1
P1
P1
P0
P1P1P0
P0
P0
P0P0
HH
HH
HH
EE
EE
DP
DP
DP
DH
DP DH
DH
DH E E
DH
DH
DH
DPDP DH
DH
DH
DH
DH
HH1 1
HH
11
H1H1
WW
WW
WW
HH1 1
HH
11
H1H1
t t
Straight
StraightLeads
Leads"ZS"
"ZS"
Straight
StraightLeads
Leads"ZS"
"ZS"
Straight
StraightLeads
Leads"ZS"
"ZS"
UNDER CRIMPED LEADS "ZU"
PP
PP
DP
DP
P PDP
DP
DPDP
W0
W2 W1
W1
W0 W2
W0
W2 W1
W1
W0 W2
W0
W2W1
W1
W0 W2
DPDP
W0
W0 W2
W2 W1
W1
W0
W0 W2
W2 W1
W1
W0
W0W2
W2W1
W1
FF
FF
FF
CC
CC
CC
Db
Db
Db
Db
DbDb
P2
P2
P2
P2
P2P2
WW
WW
WW
P2
P2
P2
P2
P2P2
DD0
DD0
DD0
DD0
DD0
DD0
EE
EE
DP
DP
E
E
DP
DH
DP DH
DH
DH
DH
DH
DH
DPDP DH
DH
DH
DH
DH
Db
Db
Db
Db
DbDb
P1
P1
P1
P1 P0
P0
P0
P1P1 P0
P0P0
EE
EE
DP
DP
E
E
DP
DH
DP DH
DH
DH
DH
DH
DH
DPDP DH
DH
DH
DH
DH
Crimped
CrimpedLeads
Leads"ZT"
"ZT"
Crimped
CrimpedLeads
Leads"ZT"
"ZT"
Crimped
CrimpedLeads
Leads"ZT"
"ZT"
STRAIGHT LEADS "ZS"
HH1 1
HH
11
H1H1
HH
HH
HH
SEATING
SEATING
PLANE
PLANE
SEATING
SEATING
PLANE
PLANE
SEATING
SEATING
PLANE
PLANE
HH0 0
HH
00
H0H0
W0
W0 W2
W2 W1
W1
W0
W0 W2
W2 W1
W1
W0
W0 W2
W2W1
W1
Db
Db
Db
Db
DbDb
PP
PP
DP
DP
P PDP
DP
DPDP
HH1 1
HH
11
H1H1
CC
CC
CC
SEATING
SEATING
PLANE
PLANE
SEATING
SEATING
PLANE
PLANE
SEATING
SEATING
PLANE
PLANE
DD0
DD0
DD0
DD0
DD0
DD0
PP
PP
DP
DP
P PDP
DP
DPDP
PP
PP
DP
DP
P PDP
DP
EE
EE
DP
DP
E
E
DP
DH
DP DH
DH
DH
DH
DH
DH
DPDP DH
DH
DH
DH
DH
DPDP
UU
UU
UU
W0
W0 W2
W2 W1
W1
W0
W0 W2
W2 W1
W1
W0
W0 W2
W2W1
W1
HH1 1
HH
11
H1H1
Ho
Ho
Ho
Ho
HoHo
DD0
DD0
DD0
DD0
DD0
DD0
Db
Db
Db
Db
DbDb
WW
WW
WW
P1
P1
P1
P1
P0
P1P1P0
P0
P0
P0P0
FF
FF
FF
tt
tt
t t
Under-crimped
Under-crimpedLeads
Leads"ZU"
"ZU"
Under-crimped
Under-crimpedLeads
Leads"ZU"
"ZU"
Under-crimped
Under-crimpedLeads
Leads"ZU"
"ZU"
Refer to next page for dimension measurement specifics.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
Tape and Reel Specifications (continued)
NOTES:
• Radial devices on tape are supplied with crimped leads, straight leads, or under-crimped leads
• Leads are offset by product dimension e1
• Conforms to ANSI and EIA specifications
• Can be supplied to IEC Publication 286-2
• 5mm parts are available on tape and reel up to 385 VAC only
SYMBOL
DESCRIPTION
5mm
7mm
MODEL SIZE
10mm
14mm
20mm
P
Pitch of Component
12.7 +/- 1.0
12.7 +/- 1.0
25.4 +/- 1.0
25.4 +/- 1.0
25.4 +/- 1.0
P0
Feed Hole Pitch
12.7 +/- 0.2
12.7 +/- 0.2
12.7 +/- 0.2
12.7 +/- 0.2
12.7 +/- 0.2
P1
Feed Hole Center to Pitch
3.85 +/- 0.7
3.85 +/- 0.7
8.85 +/- 0.7
8.85 +/- 0.7
8.85 +/- 0.7
P2
Hole Center to Component Center
6.35 +/- 1.0
6.35 +/- 1.0
12.7 +/- 0.7
12.7 +/- 0.7
12.7 +/- 0.7
F
Lead to Lead Distance
5.0 +/- 1.0
5.0 +/-1.0
7.5 +/- 1.0
7.5 +/- 1.0
7.5 +/- 1.0
h
Component Alignment
2.0 Max
2.0 Max
2.0 Max
2.0 Max
2.0 Max
W
Tape Width
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
18.0 +1.0 / -0.5
W0
Hold Down Tape Width
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
12.0 +/- 0.3
W1
Hole Position
W2
Hold Down Tape Position
9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50 9.0 +0.75 / -0.50
0.5 Max
0.5 Max
0.5 Max
0.5 Max
0.5 Max
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
18.0 +2.0 / -0.0
16.0 +/- 0.5
16.0 +/- 0.5
16.0 +/- 0.5
16.0 +/- 0.5
16.0 +/- 0.5
H
Height from Tape Center to
Component Base
H0
Seating Plane Height
H1
Component Height
29.0 Max
32.0 Max
36.0 Max
40.0 Max
46.5 Max
D0
Feed Hole Diameter
4.0 +/- 0.2
4.0 +/- 0.2
4.0 +/- 0.2
4.0 +/- 0.2
4.0 +/- 0.2
t
Total Tape Thickness
0.7 +/- 0.2
0.7 +/- 0.2
0.7 +/- 0.2
0.7 +/- 0.2
0.7 +/- 0.2
U
Undercrimp Width
8.0 Max
8.0 Max
8.0 Max
8.0 Max
8.0 Max
p
Component Alignment
3° Max
3º Max
3° Max
3° Max
3° Max
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15
Metal-Oxide Varistors (MOVs)
Radial Lead Varistors > ZA Series
Part Numbering System
BASE PART CODES
(See Ratings & Specifications tables and notes below)
OPTION CODES
(See notes below)
V XXX ZA XX P W XXXXX
For “VARISTOR”
See OPTIONS CODES notes below
NOMINAL VOLTAGE (V NOM )
(One, Two or Three Digits)
SERIES + PACKAGING / LEAD STYLE
DESIGNATOR
For standard parts, use the BASE PART designator only.
For parts with non-standard options (such as additional form, packaging
and lead space options), use BASE PART + OPTION CODE.
OPTION CODE items are subject to availability and minimum order
requirements. Please contact a Littelfuse products representative for
additional information or questions
(See BASE PART CODES notes below)
ZA = Bulk Pack / Straight Leads (standard)
ZC = Bulk Pack / Crimped and Trimmed Leads
ZS = Tape and Reel / Straight Leads
ZT = Tape and Reel / Crimped Leads
ZU = Tape and Reel / Under-Crimped Leads
RELATIVE ENERGY INDICATOR
(One or Two Digits)
LEAD-FREE, HALOGEN-FREE AND
RoHS COMPLIANT INDICATOR
COPPER ELECTRODE
Ordering Notes:
BASE PART CODES:
OPTION CODES:
Series + Packaging / Lead Style Designators:
X10: 10MM LEAD SPACING OPTION --
Ordering examples:
Straight
Lead
Bulk Pack
(standard)
Straight
Lead
Tape &
Reel
Crimped
Lead
Tape &
Reel
V18ZA3P
V18ZS3P
V18ZT3P
Crimped &
UnderTrimmed Crimp Lead
Lead
Tape &
Bulk Pack
Reel
V18ZC3P
For 10 -/+1 mm (0.394-/+0.039 in) lead spacing (available
on 20mm diameter models only), append standard
model BASE PART number with "X10." Example:
Standard Model
Order As
V18ZA40P
V18ZA40PX10
V18ZU3P
X2855: Nickel Barrier COATED WIRE OPTION --
Crimped lead ZA Series varistors are supplied standard in tape and
reel, denoted with "ZT."
"ZC" style is supplied in bulk only.
"ZU" style is supplied in tape and reel only.
For crimped leads without trimming and any varitions other than that
described above, please contact Littelfuse.
Packaging and Quantities:
Littelfuse ZA Series varistors are shipped standard in bulk pack
with straight leads and lead spacing outlined in the Package
Dimensions section of this data sheet. Contact your Littelfuse
sales representative to discuss non-standard options.
Tape & Reel Quantities:
Device Size
Voltage
5mm
7mm
10mm
14mm
20mm
All
All
All
< 300V
< 300V
"S" Reel
1000
1000
500
500
500
Quantity Per Reel
"T" Reel
"U" Reel
1000
1000
1000
1000
500
500
500
500
500
400
All standard parts use tinned copper clad steel wire.
Nickel Barrier Coated wire is available as an option,
consisting of Copper wire with a flashing of Nickel
followed by a top coating of Tin. To order append standard
model BASE PART number with "X2855." Example:
Standard Model
Order As
V18ZA40P
V18ZA40PX2855
X1347: Hi-Temperature phenolic coating option -Phenolic Coated C-III Series devices are available with improved
maximum operating maximum temperature of 125°C.
To order, add X1347 to end of part number
(Example: V22ZA3PX1347).
For additional information please refer to the section labeled
"Phenolic Coating Option" within this document.
© 2015 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/20/15