Series 4.3-10
Description
Content
HUBER+SUHNER 4.3-10 connectors offer very low PIM performance together with weight and compactness advantages.
A key feature of this connector is the separation of the electrical
and mechanical plane, which results in a lower coupling torque
and the possibility of offering the connector with screw, handscrew and quick-lock design, thus simplifying the installation
effort and offering for all mechanisms a very high and reliable
electrical performance independently from the torque applied
Description373
Technical data
374
Cable connectors
375
Calibration with precision adapters
377
Applications
Superior electrical and mechanical features of 4.3-10 make it
an ideal interface which meets all future design requirements of
base stations, distributed antenna systems (DAS), in-building
architecture, and small cell applications.
Benefits
• Excellent RL and PIM performances independent of torque
• High density module design because of smaller flange
• High screening efficiency
• Light weight modules because of low components weight
• Electrical contact protected
and no need of thick-walled modules (no torque or small
torque required)
• High flexibility in the choice of the best matching coupling
mechanism
• Reliable electrical performance
• Easy installation
• Compactness: flange (25.4 mm)
• Low weight
• 3 possible mechanical connections (screw, hand-screw
and quick-lock) on 1 universal female connector
4.3-10
Features
HUBER+SUHNER RF connectors 4.3-10
373
Series 4.3-10 – technical data
The 4.3-10 interface dimensions conform to the international standards IEC 61169-54.
IEC 61169-1
Nominal impedance
50 Ω
Frequency range
up to 12 GHz
Reflection factor (interface only)
9.2.1.
0.015 max. DC to 4 GHz
0.025 max. 4 – 6 GHz
Centre and outer contact resistance
9.2.3.
initial ≤ 1.0 mΩ
after conditioning ≤ 1.5 mΩ
Insulation resistance
9.2.5.
initial ≥ 5 GΩ
after conditioning ≥ 200 MΩ
Proof voltage at sea level
r.m.s. values at 40 Hz to 60 Hz
9.2.6.
2500 V
Screening effectiveness
9.2.8.
Intermodulation
IEC 62037-3
Mechanical data
IEC 61169-1
Mechanical operations
9.5.
> 100 operations
Centre contact captivation (axial force)
9.3.5.
30 N
Coupling torque (screw)
9.3.6.
≥ 5 Nm
proof torque: 8 Nm
• tool tightened
• hand tightened and quick-lock
• 2 × 20 W
• 2 × 40 W
−166 dBc
−160 dBc
Engagement force (quick-lock)
typ. 100 N
Separation force (quick-lock)
typ. 80 N
Tensile strength of coupling mechanism
(quick-lock)
9.3.11.
≥ 450 N
Vibration
9.3.3.
100 m/s2, 10 g acceleration, 2 – 200 Hz
Shock
9.3.14.
981 m/s2, 100 g acceleration, ½ sin 6 ms
Environmental data
IEC 61169-1
−55 to +90 °C
Temperature range
4.3-10
Climatic
1
≥ 120 dB
DC to 3 GHz: ≥ 90 dB ; 3 – 6 GHz: ≥ 70 dB
Diese Zeichnung ist unser geistiges Eigentum und darf ohne unsere Einwilligung weder kopiert,
vervielfältigt noch Drittpersonen oder Konkurrenzfirmen zugänglich gemacht werden. ( Art. 12 B.G.)
This drawing is copyright. Information contained thereon is supplied in confidence
and must not be used for any other purpose than which it was supplied, or be reproduced without written permission of the owners.
Electrical data
category1
55/155/56
40/85/21
Sealing
IEC 60529
IP x8 2.5 bar, 1 h
Salt mist
9.4.6.
duration of spraying 48 h
High temperature endurance
9.6.
250 h at 85 °C
For certain connectors the upper temperature limit is restricted by the cable characteristics. Reference should be made to the relevant cable specification.
Performance listed is typical. Individual part configuration may vary. Contact HUBER+SUHNER for more information and specifications by item number.
374
HUBER+SUHNER RF connectors 4.3-10
Series 4.3-10 – cable connectors
20.5
(.807)
Fig. 1
type / Typ:
11_4310-50-5-X1
dimensions in millimeter [mm]
description / Beschreibung
alternative ID :
20.5
(.807)
Fig. 2
part no. / Teile Nr.:
HUBER+SUHNER type
Cable plug
PRO-00264957
A
sheet/Blatt
drawing-no. / Zeichnungsnr.
type / Typ:
xx / xx
DCA-00264957
Item no.
11_4310-50-5-Y1
dimensions in millimeter [mm]
Release
A
20.5
(.807)
Fig. 3
type / Typ:
11_4310-50-5-Z1
dimensions in millimeter [mm]
part no. / Teile Nr.:
PRO-00264967
Cable group (example)
DCA-00264967
description / Beschreibung
Cable plug
25.3
(.996 DIA.)
23
(.906 DIA.)
24.8
(.976 DIA.)
SW 22
(.866 HEX.)
Diese Zeichnung ist unser geistiges Eigentum und darf ohne unsere Einwilligung weder kopiert,
vervielfältigt noch Drittpersonen oder Konkurrenzfirmen zugänglich gemacht werden. ( Art. 12 B.G.)
This drawing is copyright. Information contained thereon is supplied in confidence
and must not be used for any other purpose than which it was supplied, or be reproduced without written permission of the owners.
For semi-rigid cables, SUCOFORM and MULTIFLEX cables
• Cable entry soldered
• Centre contact soldered
Diese Zeichnung ist unser geistiges Eigentum und darf ohne unsere Einwilligung weder kopiert,
vervielfältigt noch Drittpersonen oder Konkurrenzfirmen zugänglich gemacht werden. ( Art. 12 B.G.)
This drawing is copyright. Information contained thereon is supplied in confidence
and must not be used for any other purpose than which it was supplied, or be reproduced without written permission of the owners.
Straight cable plugs (male)
A
sheet/Blatt
drawing-no. / Zeichnungsnr.
alternative ID :
xx / xx
description / Beschreibung
A
Packaging
Cable plug
Release
alternative ID :
part no. / Teile Nr.:
Fig.
11_4310-50-5-X1/003_-H
11_4310-50-5-X1/003_-E
85020471
85021044
Y14 (SUCOFORM_250-1)
bulk 100 pcs
single
1
11_4310-50-5-Y1/003_-H
11_4310-50-5-Y1/003_-E
85020517
85021045
Y14 (SUCOFORM_250-1)
bulk 100 pcs
single
2
11_4310-50-5-Z1/003_-H
11_4310-50-5-Z1/003_-E
85020523
85021047
Y14 (SUCOFORM_250-1)
bulk 100 pcs
single
3
PRO-00264968
A
sheet/Blatt
drawing-no. / Zeichnungsnr.
xx / xx
Release
DCA-00264968
A
Right-angle cable plugs (male)
For semi-rigid cables, SUCOFORM and MULTIFLEX cables
• Cable entry soldered
• Centre contact soldered
28.2
(1.110)
8.3
(.327)
13
(.512)
23
(.906 DIA.)
8.3
(.327)
13
(.512)
Fig. 2
Fig. 1
Fig. 3
HUBER+SUHNER type
Item no.
Cable group (example)
Packaging
Fig.
16_4310-50-5-X1/003_-H
16_4310-50-5-X1/003_-E
85020524
85021049
Y14 (SUCOFORM_250-1)
bulk 100 pcs
single
1
16_4310-50-5-Y1/003_-H
16_4310-50-5-Y1/003_-E
85020525
85021070
Y14 (SUCOFORM_250-1)
bulk 100 pcs
single
2
16_4310-50-5-Z1/003_-H
16_4310-50-5-Z1/003_-E
85020526
85021071
Y14 (SUCOFORM_250-1)
bulk 100 pcs
single
3
Cable groups see page 32
4.3-10
23.4
(.921)
23.5
(.925)
SW 22
(.866 HEX.)
24.8
(.976 DIA.)
8.3
(.327)
13
(.512)
23.4
(.921)
28.1
(1.106)
25.3
(.996 DIA.)
28.1
(1.106)
Assembly tools see page 477
Mounting holes / PCB layouts see page 501
HUBER+SUHNER RF connectors 4.3-10
375
Straight cable jacks (female)
32.18
(1.267)
22
(.866)
25.4
(1.000 SQ.)
2.5
(.098)
19
(.748 SQ.)
3.6
(.142)
M 20 x 1
Diese Zeichnung ist unser geistiges Eigentum und darf ohne unsere Einwilligung weder kopiert,
vervielfältigt noch Drittpersonen oder Konkurrenzfirmen zugänglich gemacht werden. ( Art. 12 B.G.)
This drawing is copyright. Information contained thereon is supplied in confidence
and must not be used for any other purpose than which it was supplied, or be reproduced without written permission of the owners.
For semi-rigid cables, SUCOFORM and MULTIFLEX cables
• Cable entry soldered
• Centre contact soldered
SW 8
(.315 HEX.)
Fig. 1
type / Typ:
25_4310-50-2-1
dimensions in millimeter [mm]
part no. / Teile Nr.:
PRO-00264985
A
sheet/Blatt
description / Beschreibung
drawing-no. / Zeichnungsnr.
Panel cable jack
DCA-00264985
xx / xx
Release
A
alternative ID :
HUBER+SUHNER type
Item no.
Cable group (example)
Packaging
Fig.
25_4310-50-2-1/003_-Y
25_4310-50-2-1/003_-E
85020530
85021079
Y16 (SUCOFORM_86)
tray 20 pcs
single
1
Series 4.3-10 – Receptacle
Straight panel receptacle (jack)
type / Typ:
23_4310-50-0-1
dimensions in millimeter [mm]
part no. / Teile Nr.:
description / Beschreibung
( 41.98 )
(1.65)
20.18
(.793)
25.4
(1.000 SQ.)
21.8
(.858)
18.25
(.719 SQ.)
M 20 x 1
2.99
(.118 DIA.)
Fig. 3
3.4
(.134)
3.5
(.138)
3.6
(.142)
19
(.748 SQ.)
Fig. 2
type / Typ:
23_4310-50-0-5
dimensions in millimeter [mm]
A
sheet/Blatt
DCA-00264955
xx / xx
Release
A
type / Typ:
dimensions in millimeter [mm]
part no. / Teile Nr.:
PRO-00264966
A
sheet/Blatt
description / Beschreibung
drawing-no. / Zeichnungsnr.
Panel jack
DCA-00264966
xx / xx
Release
B
Packaging
23_4310-50-0-1/003_-Y
23_4310-50-0-1/003_-E
85020598
85021072
tray 40 pcs
single
1
23_4310-50-0-2/003_-Y
23_4310-50-0-2/003_-E
85020599
85021073
tray 60 pcs
single
2
23_4310-50-0-5/003_-Y
23_4310-50-0-5/003_-E
85021011
85020470
tray 60 pcs
single
alternative ID :
Assembly tools see page 477
Notes
with panel seal
A
sheet/Blatt
DCA-00264946
23_4310-50-0-2
Item no.
HUBER+SUHNER RF connectors 4.3-10
PRO-00264946
drawing-no. / Zeichnungsnr.
Panel jack
HUBER+SUHNER type
Cable groups see page 32
part no. / Teile Nr.:
description / Beschreibung
alternative ID :
drawing-no. / Zeichnungsnr.
Panel jack
alternative ID :
376
PRO-00264955
4.3
(.169 DIA.)
M 20 x1
Fig. 1
25.4
(1.000 SQ.)
22
(.866)
2.5
(.098)
Diese Zeichnung ist unser geistiges Eigentum und darf ohne unsere Einwilligung weder kopiert,
vervielfältigt noch Drittpersonen oder Konkurrenzfirmen zugänglich gemacht werden. ( Art. 12 B.G.)
This drawing is copyright. Information contained thereon is supplied in confidence
and must not be used for any other purpose than which it was supplied, or be reproduced without written permission of the owners.
19
(.748)
2.5
(.098)
7.3
(.287)
M 20 x1
25.4
(1.000 SQ.)
30
(1.181)
( 29.3 )
( 1.15 )
3.6
(.142)
19
(.748)
Diese Zeichnung ist unser geistiges Eigentum und darf ohne unsere Einwilligung weder kopiert,
vervielfältigt noch Drittpersonen oder Konkurrenzfirmen zugänglich gemacht werden. ( Art. 12 B.G.)
This drawing is copyright. Information contained thereon is supplied in confidence
and must not be used for any other purpose than which it was supplied, or be reproduced without written permission of the owners.
( 49.05 )
( 1.93 )
4.34
(.171 DIA.)
4.3-10
Diese Zeichnung ist unser geistiges Eigentum und darf ohne unsere Einwilligung weder kopiert,
vervielfältigt noch Drittpersonen oder Konkurrenzfirmen zugänglich gemacht werden. ( Art. 12 B.G.)
This drawing is copyright. Information contained thereon is supplied in confidence
and must not be used for any other purpose than which it was supplied, or be reproduced without written permission of the owners.
With coaxial end
•4 hole, 1 inch flange
Fig.
3
Mounting holes / PCB layouts see page 501
xx / xx
Release
A
Series 4.3-10 – calibration with precision adaptors
(swapping method)
For return loss/VSWR measurements of 4.3-10 connectors, HUBER+SUHNER recommends the following calibration method.
Depending on the 4.3-10 side (male or female) or ports on the test leads, different configurations are possible. Four different configurations with PC3.5 calibration kits or precision N calibration kits are listed below:
Calibration*
Test lead with N (m)
33_N-50-0-51/193_NE
N(f) / N(m)
33_4310-N-50-X1/133_NE
N (f) / 4310 (m)
Measurement reference
Network analyzer
Calibration reference
Configuration 1, 4.3-10 (f)
Measurement
4310 (f)
Configuration 2, 4.3-10 (f)
Network analyzer
Test lead with PC35 (m)
33_PC35-50-0-2/199_NE
33_4310-PC35-50-X1/133_NE
PC3.5 (f) / PC3.5 (m)
PC35 (f) / 4310 (m)
4310 (f)
Configuration 3, 4.3-10 (m)
Network analyzer
Test lead with N (f)
33_N-50-0-51/193_NE
33_N-4310-50-1/133_NE
N(m) / N(f)
N (m) / 4310 (f)
4310 (m)
Network analyzer
*
Test lead with PC35 (f)
33_PC35-50-0-2/199_NE
33_PC35-4310-50-1/1-9_NE
PC3.5(m) / PC3.5(f)
PC35 (m) / 4310 (f)
4.3-10
Configuration 4, 4.3-10 (m)
4310 (m)
The calibration connectors need to be swapped and replaced by the corresponding 4.3-10 adaptors
HUBER+SUHNER RF connectors 4.3-10
377