Westell In-Building Wireless
System Components
High performance passive components for
superior system performance
Westell offers an extensive line of in-building passive devices to meet
a variety of DAS requirements. These passive components, which include
the following products, are available in multiple port configurations, power
Westell’s Dedication
to Superior Performance
options and connector types.
• Directional Couplers
Short Lead Times
• Hybrid Couplers
Westell’s top selling passive
• Cross Band Couplers (aka Diplexers)
• Terminations
• Filters
• Duplexers
components are in-stock and available
for immediate shipment.
• Power Tappers
Continuous Expansion of
Product Portfolio
• Power Dividers
Westell is committed to expanding our
• In-Line Attenuators
ClearLink® Low PIM Passives
At Westell we are dedicated to providing high performance products that
meet or exceed the typical PIM measurement to deliver the most superior
DAS possible. Available in type N, DIN, or 4.3-10 connectors*, our ClearLink
offerings to meet evolving industry
requirements. Check out our new
4.3-10 low PIM ClearLink connector
models.
PIM rated passives are tested and approved to meet carrier requirements of
≤ -153 dBc and ≤-161 dBc, measured with 2 tones @ +43 dBc. This line
includes:
Unparalleled Support
Westell takes pride in providing
• Hybrid Couplers
superior support. In a recent
• Power Dividers
customer satisfaction survey, 96%
• Directional Couplers
• Power Tappers
*4.3-10 connector options have a PIM rating of -154
of respondents rated our support as
exceeding or meeting expectations.
If you need help determining the
correct passive component(s) to meet
your specific application requirements,
contact us today.
Page 1 of 2
w e s tell .co m
Westell In-Building Wireless System Components
ClearLink® System Components
Description
Band
Connector Type
Offerings
Power Offerings
(average power)
2, 3, or 4 way
698-2700 MHz
N, DIN, or
4.3-10
50, 300, or 700 Watts
5, 6, 10, 15, 20, or 30
standard coupling (dB)
698-2700 MHz
N, DIN, or
4.3-10
200 Watts
ClearLink® Hybrid
Coupler
Dual directional, 3.1 (dB) ±0.5
698-2700 MHz
N, DIN, or
4.3-10
200 Watts
ClearLink® Power
Tappers
5, 6, 10, 15, 20, or 30 standard
coupling (dB)
698-2700 MHz
N, DIN, or
4.3-10
200 Watts
ClearLink® Power
Dividers
ClearLink® Directional
Couplers
Standard System Components
Power Dividers
Directional Couplers
Terminations
Description
Band
Connector Type
Offerings
Power Offerings
(average power)
2, 3, or 4 way
700-2700 MHz
N
10 Watts
6, 10, 15, 20, or 30
standard coupling (dB)
700-2700 MHz
N
100 Watts
50 Ohms
Broadband DC-6 GHz
N or DIN
10 Watts
1700-1900, 698-2300, 800-2300,
800-900, LTE 700 MHz Upper C or
Lower ABC blocks with Cellular 850,
PCS 1900, and AWS bands
N
10 Watts
DC-6.0 GHz
N
10 Watts
824-849; 869-894 MHz
(Cellular 850)
1850-1910; 1930-1990 MHz
(PCS 1900)
N
200 Watts
Cellular 850, PCS 1900, Public
Safety 800 and Upper 700 C
N
200 Watts
Cross Band Couplers
In-line Attenuators
Duplexers
Filters
3, 5, 6 , 10, 15, 20 or 30
dB attenuation
For more detailed information on our system components, please request our product specific datasheets.
Don’t See Something? Let Us Know
We understand that the each DAS environment is unique. If there is something you don’t see as part of our standard product offerings,
please contact us today.
Page 2 of 2
Copyright © 2015 by Westell, Inc. All Rights Reserved. Westell, ClearLink, Kentrox, and Optima
Management System are registered trademarks of Westell, Inc. All other names are trademarks of their
respective owners. Information is correct at time of printing and is subject to change without notice.
Westell, Inc. is an Equal Opportunity/Affirmative Action employer.
w e s tell .co m
030-200289 rC 02/24/16