PROJECT INFORMATION
MEDMASTER™
Surgical Suite Luminaires
Job Name
Fixture Type
M2SE SERIES
Catalog Number
PRODUCT FEATURES:
Approved by
»» Surface ceiling mount – 2'×4'
»» One-piece sealed housing and doorframe for infection
control
»» Smooth exterior lens for cleanability
»» Sureshield™ mesh filter reduces radiated emissions
»» Radiated and conducted emissions controlled as
per MIL-STD-461F.
SPECIFICATIONS
HOUSING: 18-gauge CRS, hole-free seam welded construction.
DOORFRAME: 18-gauge CRS, one-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe
secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners. Antimicrobial finish standard on all exposed painted surfaces of installed
luminaire. Doorframe Gasket: One-piece closed cell silicone gasket seals doorframe to housing and ceiling structure.
LENS: Two piece design. Smooth lens exterior is .125" clear acrylic, sealed to doorframe with silicone sealant. Interior lens is .030" acrylic micro linear prism, both lenses mechanically secured in
place. See options for alternate lens.
OPTICS: Symmetric reflectors are CRS with a high reflectance powder coated surface. Asymmetric reflectors are premium 95% specular aluminum. Green phosphor lamp
(GL Option) located in symmetric reflector area (see Cross Section right). Light direction reflectors are field changeable.
SURESHIELD™: Stainless steel mesh filter reduces radiated emissions.
ELECTRICAL: Electronic ballast <10% THD. Programmed-Start, low voltage electronic dimming ballast (DM7) designed to operate T8 or T5HO fluorescent lamps over a full range of light output
(100-3% T8; 100-1% T5HO). Minimum Power Factor .98 for T5HO and .99 for T8. THD at full light output 10%. Operates from compatible 0-10vdc controllers on Class 1 or Class 2 low voltage
systems. See Ordering Information for alternate or multiple ballasts and optional equipment. Lamps by others. RFI suppressor standard – one per circuit, one circuit standard.
INSTALLATION: Four .375" holes for surface mounting.
LISTINGS: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Radiated and conducted
emissions controlled as per MIL-STD-461F (standard with electronic and electronic dimming ballasts).
IP65
ISO 5
MIL STD
461F
Class 100
ORDERING INFORMATION (Ex: M2SESI24-4-28-RS-L2-120-2F-2H-MLP)
Model
Lamp Qty
Lamp Type
Ballast Type
Lighting Levels
Voltage
Doorframe
Housing
Lens Type
Options
M2SESI24
Lighting Levels – See chart below for ballast and RFI information
L1 One (STD)
L2Two
L3 Three (6 Lamps Only)
LDDimmable
Lamp Quantity
4Four
6Six
4/2 Four White/Two Green
Lamp Type
28F28T5
32 F32T8
32/32Four White/Two Green
54 F54T5HO (4 Lamp Max.)
Voltage
120 120 Volts
277 277 Volts
Ballast Type
IS
Instant Start Electronic <10% THD (T8)
RS Rapid Start Electronic <10% THD (T8,T5,T5HO)
DM7 Low Voltage Electronic Dimming Ballast
Doorframe Options
2F 18-Ga CRS Painted Antimicrobial (STD)
AF Anodized Extruded Aluminum
PAF Painted (Antimicrobial) Fabricated Aluminum
5F 18-Ga Type 304 SS Brushed
Lighting Levels – Ballast and RFI Information
LAMPS
LEVEL 1
LEVEL 2
(6) T8 Lamps
(2) 3 lamp ballasts +
(1) RFI filter
(4) T8 Lamps
(1) 4 lamp ballasts +
(1) RFI filter
(4) T8 Lamps + N/A
(2) T8 Green
(4) T5HO Lamps (2) 2 lamp ballasts +
T5
(1) RFI filter
www.kenall.com
LEVEL 3
Housing Options
2H 20-Ga CRS (Antimicrobial) (STD)
5H 20-Ga Type 304 SS
PAH .050" Painted Aluminum (Antimicrobial)
Lens Type
MLP Micro Linear Prism (STD)
SL Specified Lens
Options
EL One-Lamp Indoor Battery Pack (32°F)
FS Fuse & Holder
GL Green Phosphor Lamps
(32W T8, 550nm only, 2 lamps included)
HD Hinged Door (w/o NSF listings)
HJ Sealed Wireway
VARIABLE LEVEL (DIMMING)
(1) 4 lamp/(1) 2 lamp ballasts (3) 2 lamp ballasts +
(2) 3 lamp dimming ballasts +
+ (2) RFI filters
(3) RFI filters
(2) RFI filters
(2) 2 lamp ballasts +
N/A
(2) 2 lamp dimming ballasts +
(2) RFI filters
(2) RFI filters
(1) 4 lamp + (1) 2 lamp
(2) 2 lamp +
(2) 2 lamp dimming ballasts +
ballast (green) + (1) 2 lamp ballast (green) + (1) 2 lamp dimming
(2) RFI filters
(3) RFI filters
ballasts (green) + (3) RFI filters
(2) 2 lamp ballasts +
N/A
(2) 2 lamp dimming ballasts +
(2) RFI filters
(2) RFI filters
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
M2SESI24-012714
For additional photometry, go to www.kenall.com
MEDMASTER™
Surgical Suite Luminaires
M2SE SERIES
DIMENSIONAL DATA
GASKET PROFILE
Doorfame
CROSS SECTION
Fixture
Housing
Gasket
CEILING CUTOUT
22.60"
Housing
(4) .375" Mounting Holes
S
S
5.35"
12.00"
22.60"
22.20"×47.72"
Doorframe
.875"
24.06"
2.55"
36.00"
48.12"
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
M2SESI24-012714