PROJECT INFORMATION
MEDMASTER™
Behavioral Healthcare Luminaires
Job Name
Fixture Type
MMPC SERIES
Catalog Number
PRODUCT FEATURES:
Approved by
»»Ceiling mount – recessed flange or surface;
2'×2' and 2'×4'
»» Heavy-duty one-piece TIG and spot welded
housing
»» Doorframe with polycarbonate lens secured
with Torx® fasteners for security
SPECIFICATIONS
HOUSING: Die-formed prime grade material as specified – see Ordering Information. TIG and spot welded construction.
DOORFRAME: One-piece die-formed prime grade material as specified – see Ordering Information. Corners continuously seam welded and smooth with no post grinding (TIG). Door frame secured
to housing with steel aircraft cables.
FINISH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Optional antimicrobial finish.
LENS: As specified – maximum thickness .375"– see Ordering Information.
LAMP SHIELDING: Ambient compartment lamps shielded by perforated steel (white TGIC polyester powder coat finish) with pearlescent acrylic diffuser. 2×4: Exam compartment shielded by sliding
semi-specular aluminum parabolic louver. ­See Ordering Information for alternate Lamp Shield Options.
GASKET: Closed cell silicone gasket seals door to housing.
DOOR FASTENERS: Torx® head with center pin hardened security screws. Fully recessed.
ELECTRICAL: LED: Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver
(<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA. LF: Fluorescent electronic 120/277V ballasts high power factor (<10% THD). See Ordering
Information for optional equipment. Lamps by others.
INSTALLATION: SURFACE MOUNT: Four .312" diameter holes. FLANGE MOUNT: Yoke mounting hardware & brackets included. Install Frame positively locates yoke brackets within ceiling opening
assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets.
WARRANTY: Limited five (5) year warranty.
LISTINGS: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone.
IP65
ORDERING INFORMATION (Ex: MMPC24-S-0-7-1/1/3-40B-120-L)
Model
Mounting
Door/Housing Material
Lens Type
Lamp Qty
1/
Series
MMPC222'×2'
MMPC242'×4'
Mounting Options
SSurface
FFlange
Door/Housing Material
0
14-Ga CRS (Painted)
1
16-Ga CRS (Painted)
2
18-Ga CRS (Painted)(n/a as Door Material)
3
14-Ga SS (Painted)
4
16-Ga SS (Painted)
6
14-Ga SS (Brushed)
7
16-Ga SS (Brushed)
Lens Type
7
.187" Clear Polycarbonate
9
.250" Clear Polycarbonate
B
.375" Clear Polycarbonate
Lamp Quantity (1/x/x)
Reading Compartment
1
One Lamp
Ambient Compartment (x)
1
One Lamp
2
Two Lamps
2'×4' Only
Exam Compartment (x)
3
Three Lamps
4
Four Lamps
Lamp Type
Driver
Voltage
Lamp Shield
Options
Accessories
/
Lamp Type
2'×2'
25L/45L35K
25L/45L40K
25L/45L50K
36B
25 Watt/45 Watt 3500K LED (82 CRI)
25 Watt/45 Watt 4000K LED (82 CRI)
25 Watt/45 Watt 5000K LED (82 CRI)
F36TT (Biax)
2'×4'
25L/45L/90L35K
25L/45L/90L40K
25L/45L/90L50K
40B
50B
55B
25 Watt/45 Watt/90 Watt 3500K LED (82 CRI)
25 Watt/45 Watt/90 Watt 4000K LED (82 CRI)
25 Watt/45 Watt/90 Watt 5000K LED (82 CRI)
F40TT (Biax)
F50TT (Biax)
F55TT (Biax)
Driver (LED only)
DCC Dimming Constant Current Driver
Options
LEL LED Emergency Battery Pack
EL* One-Lamp Emergency Battery Pack (32°F)
(347V dry location only)
LCL‡ LED Chart Light
AMF Antimicrobial Finish on exposed surfaces
RF▲ Radio Frequency Filter
FS Fuse & Holder (1 per circuit)
LN LED White Night Light
CL‡▲ Chart Light – 20W MR16 (Lamp by other)
LVC▲ Low Voltage Controller (See Application Guide or
consult factory for switching options)
TN▲Night Light – 5/7/9 Watt PL
(Lamp supplied by other)
Accessories
C-2063 Lamp, 20W MR16 12VAC 8° Spot
IF Install Frame (Flange only)
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DV 120-277 Volts
‡ Only available with L or LW Lamp Shield Option
on 2'×4' fixture
▲ n/a with 347V
* n/a with LED
Lamp Shield Options 2'×4' (Exam Section)
L* Semi-Specular Aluminum Parabolic
3"×3"Louver
C*Metalized Acrylic Parabolic
.62"×.62" Louver
LW* Matte White 3"×3" Louver
I*
.125" #12 Prismatic Acrylic
SYM Symmetric, Diffused DR Acrylic (LED Only)
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
MMPC_22_24-111715
For additional photometry, go to www.kenall.com
MEDMASTER™
Behavioral Healthcare Luminaires
MMPC SERIES
PERFORMANCE
Initial Delivered Lumens
Model
Compartment
Lamp Type
25L35K
Reading
25L40K
Ambient
MMPC22
Exam/Ambient
Reading
Ambient
Input Power
(W)
Drive Current
(mA)
1064
53
20
94
80,000
1134
57
20
94
80,000
Estd. L70
LED Life (Hrs)
25L50K
1179
59
20
94
80,000
45L35K
2156
54
40
94
80,000
45L40K
2298
57
40
94
80,000
80,000
45L50K
2390
60
40
94
25L/45L35K
3193
54
59
94
80,000
25L/45L40K
3404
58
59
94
80,000
25L/45L50K
3540
60
59
94
80,000
25L35K
1239
54
23
94
80,000
25L40K
1321
57
23
94
80,000
25L50K
1374
60
23
94
80,000
45L35K
2776
57
49
94
80,000
45L40K
2959
60
49
94
80,000
45L50K
3077
63
49
94
80,000
90L35K
7042
96
73
94
60,000
90L40K
7507
103
73
94
60,000
90L50K
7808
107
73
94
60,000
25L/45L/90L35K
13401
79
169
94
60,000
25L/45L/90L40K
14287
85
169
94
60,000
25L/45L/90L50K
14858
88
169
94
60,000
MMPC24
Exam
Reading/Ambient/Exam
Efficacy
(lm/W)
@ 25°C
Displayed information is for selected luminaires only. Additional wattages and color temperatures are also available.
Visit www.kenall.com for additional information.
Model: MMPC22-G-1/2-25L/45L40K-DCC-DV
Model: MMPC24-G-1/2/4-25L/45L/90L40K-DCC-DV
1474
5949
1106
737
4462
2
2975
369
2
1487
1
1
Maximum Candela = 1474 Located At Horizontal Angle = 0, Vertical Angle = 5
Maximum Candela = 5949 Located At Horizontal Angle = 210, Vertical Angle = 5
1 - Vertical Plane Through Horizontal Angles (0-180) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.)
www.kenall.com
P: 800-4-Kenall
1 - Vertical Plane Through Horizontal Angles (210-30) (Through Max. Cd.)
2 - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.)
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
MMPC_22_24-111715
For additional photometry, go to www.kenall.com
MEDMASTER™
Behavioral Healthcare Luminaires
MMPC SERIES
DIMENSIONAL DATA
CROSS SECTION – 2×2
CROSS SECTION – 2×4
A
A
6.50" (F)
6.50"
6.65" (S)
B
(Flange)
B
(Flange)
MOUNTING HOLES – SURFACE
2×2
2×4
12.00"
12.00"
20.00"
30.00"
DIMENSIONAL DATA (IN INCHES)
A (HOUSING)
B(FLANGE)
2×2 Flange 18-Ga: 23.03×23.03/ 16-Ga: 23.05×23.05/14-Ga: 23.08×23.08
2×4 Flange 18-Ga: 23.03×47.03/ 16-Ga: 23.05×47.05/14-Ga: 22.58×46.64
24.26 ×24.26
24.26×48.26
2×2 Surface 18-Ga: 22.94×22.94/ 16-Ga: 22.99×22.99/14-Ga: 23.05×23.05
2×4 Surface18-Ga:22.94×46.94/ 16-Ga: 22.99×46.99/14-Ga: 23.05×47.05
-----------------
Recommended Ceiling Cutout – Flange Mount:
2×2: 23.25×23.25
2×4: 23.25×47.25
**Add .375" to each cut-out dimension when Install Frame (IF) Accessory is specified
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
MMPC_22_24-111715