SS/SSE SERIES
SP3T to SP6T
MULTI POSITION SWITCH
DC-22 GHz u SMA
The SS Series features SMA connectors and a frequency range of
DC to 18 GHz.
l The
SSE Series also features SMA connectors and a frequency
range of DC to 22 GHz.
Both series are available with failsafe or normally open functions.
Please contact DBP for latching and pulse latching design
availability.
Weight (max.):
RF Impedance:
Operating Temperature:
Operating Life:
Switching Time:
Switching Sequence:
6.5 oz
50 ohms nominal
-55°C to +85°C ambient
1,000,000 cycles min.
15 mSec max.
Break Before Make
SPECIFICATIONS
Frequency
DC-4 GHz
4-8 GHz
8-12 GHz
12-18 GHz
18-22 GHz l
VSWR
(max.)
1.20
1.30
1.40
1.50
1.60
Insertion
Loss
(dB max.)
0.30
0.35
0.40
0.50
0.60
Isolation
(dB min.)
75
70
65
60
60
Actuator Current
(typical)
12 Vdc
15 Vdc
24 Vdc
Failsafe
600mA
470mA
300mA
Normally Open
310mA
250mA
155mA
* If reduced coil current is required, please contact Factory.
AVAILABLE OPTIONS
OPTION 3
OPTION 4
VOLTAGE
ACTUATOR
1 - 12 Vdc
Failsafe
Normally Open
2 - 28 Vdc A - Standard
C - Indicators
LStandard
N - Indicators
3 - 15 Vdc B Diodes
D - Diodes, Indicators
M - Diodes
P - Diodes, Indicators
5 - Other
6 - 24 Vdc
Low Input Drivers with: High Input Drivers with: Low Input Drivers with: High Input Drivers with:
7 - 5 Vdc
E - Diodes
EH - Diodes
RDiodes
RH - Diodes
F - Diodes, Indicators
FH - Diodes, Indicators
SDiodes, Indicators
SH - Diodes, Indicators
EB - B C D, Diodes
EBH - B C D, Diodes
RB - B C D, Diodes
RBH -B C D, Diodes
FB - B C D, Diodes,
FBH - B C D, Diodes,
SB - B C D, Diodes,
SBH -B C D, Diodes,
Indicators
Indicators
Indicators
Indicators
OPTION 5
POLARITY
1 - Negative
2 - Positive
3 - Not Applicable
1234-
OPTION 6
TERMINALS
Solder
Terminals
Circular
Connector
Other (Specify)
Sub M iniature
D-Shell
Connector
28 Vdc
280mA
135mA
ADDITIONAL OPTIONS
OPTION 7
STANDARD OPTIONS
1 - Moisture Seal
2 - High Temperature
(125°C)
3 - Moisture Seal &
High Temperature
(125°C)
OPTION 8
BRACKETS
A - See Page 58
Requires Body "U"
OPTION 9
BODIES
U - See Page 62
For “Additional
Options” please
contact Factory
for part number.
SS/SSE
Option 1
Positions
Option 2
Series
Option 3
Voltage
Option 4
Actuator
Option 5
Polarity
DBP MICROWAVE
Option 6
Terminals
www.dbp4switches.com u
35
info@dbp4switches.com
072503
SS/SSE SERIES
SP3T to SP6T
MULTI POSITION SWITCH
DC-22 GHz u SMA
DC TERMINAL FUNCTIONS
TOP VIEW
PIN
A, C
1
2
C
N/A
C+/N/A
3
N/A
N/A
4
AV 2
AV 2-/+
5
AV 3
AV 3-/+
6
7
8
AV 4
AV 5
AV 6
AV 4-/+
AV 5-/+
AV 6-/+
Actual markings will reflect terminal
functions, not letter or number
designation as shown above.
LATCHING
NORMALLY OPEN
(Contact DBP for design availabilty)
M, P
R, RH, RB, G, H
J, JH, JB, T, U, V, W
RBH, S,
JBH, K,
SH, SB,
KH, KB,
SBH
KBH
FAILSAFE
B, D
E, EH, EB, L, N
EBH, F,
FH, FB,
FBH
M1
+VSW
C RTN
N/A or
BCD 1
L 2 or
BCD 2
L 3 or
BCD4
L 4 or
BCD 8
L5
L6
M2
M3, M4
C
N/A
C+/N/A
AV 1
AV 1-/+
AV 2
AV 2-/+
AV 3
AV 3-/+
AV 4
AV 5
AV 6
AV 4-/+
AV 5-/+
AV 6-/+
+V SW
C RTN
L 1 or
BCD 1
L 2 or
BCD 2
L 3 or
BCD4
L 4 or
BCD 8
L5
L6
SCHEMATICS
Pages 51-56
M5
M6
M7, M8
C+/N/A
AV 1-/+
AV 2-/+
AV 3-/+
AV 4-/+
AV 5-/+
AV 6-/+
M9
+V SW
C RTN
L 1 or
BCD 1
L 2 or
BCD 2
L 3 or
BCD4
L 4 or
BCD 8
L5
L6
C+/N/A
PV 1-/+
PV 2-/+
PV 3-/+
PV 4-/+
PV 5-/+
PV 6-/+
M10, M11 M12, M13
INDICATORS
PIN
FRONT VIEW
A
B
C
D
E
F
G
COM
1 or F/S
2
3
4
5
6
See Page 65 for Legend of Terms and tolerances
See Page 57 for Truth Table
AVAILABLE
OPTIONS*
OUTLINE DRAWING
DIMENSION "A"
A, L
1.75
B, C, M, N
2.00
D, P
2.25
E, EH, R, RH
2.25
EB, EBH, RB, RBH
2.25
F, FH, S, SH
2.75
FB, FBH, SB, SBH
2.75
* Consult Factory for Dimension "A" when
multi-pin connector is desired.
BOTTOM VIEW
DBP MICROWAVE
www.dbp4switches.com u
36
info@dbp4switches.com
072503
IND C
IND C
IND NC
IND NC
IND NO
IND NO
PWR
PWR
+
_
RF
3
RF
3
4
4
2
2
1
1
Schematic S18
Schematic S17
IND C
C
IND
1
TERMINALS
2
IND NC
IND NO
LOGIC INPUT
PWR
CURRENT
CUT OFF
L D
OR
G I
I V
CE
R
+V
COM RTN
+C
-2
-1
RF
3
RF
3
4
4
2
2
1
1
Schematic S19
Schematic S20
C
C
IND
1
TERMINALS
2
IND
1
TERMINALS
2
+V
COM RTN
POS 1
POS 2
L D
OR
GI
I V
CE
R
+C
PWR -2
-1
RF
3
RF
3
4
4
2
2
1
1
Schematic S21
Schematic S22
C
IND N
IND 2
IND F/S
IND
1
TERMINALS
2
IND COM
+C
PWR -2
PWR COM
N
2
-1
RF
3
4
2
1
C
Schematic S23
FS
DBP MICROWAVE
www.dbp4switches.com u
53
2
N
RF
Schematic M1
info@dbp4switches.com
IND N
IND 2
IND F/S
IND N
IND 2
IND F/S
IND COM
IND COM
PWR +COM
-N
-2
+V
COM RTN
LOGIC N
LOGIC 2
Schematic M2
C
FS
2
N
L
O
G
I
C
D
R
I
V
E
R
Schematic M3
C
FS
RF
IND N
IND 2
IND F/S
IND N
IND 2
IND 1
IND COM
IND COM
+V
COM RTN
BCD 8
BCD 4
BCD 2
BCD 1
C
FS
2
N
RF
Schematic M5
C
IND N
IND 2
IND 1
IND COM
IND COM
PWR +COM
-N
-2
-1
+V
COM RTN
LOGIC INPUT N
LOGIC INPUT 2
LOGIC INPUT 1
C
1
2
1
L
O
G
I
C
N
2
N
2
N
D
R
I
V
E
R
N
C
1
RF
RF
Schematic M6
Schematic M7
IND N
IND 2
IND 1
IND N
IND 2
IND 1
IND COM
IND COM
PWR +COM
-N
D
BR
C I
DV
E
R
-2
-1
C
1
2
N
C
RF
Schematic M8
CURRENT
CUT OFF
BCD 8
BCD 4
BCD 2
BCD 1
2
RF
IND N
IND 2
IND 1
+V
COM RTN
N
PWR COM
N
2
1
D
BR
C I
DV
E
R
Schematic M4
2
RF
1
RF
Schematic M9
DBP MICROWAVE
www.dbp4switches.com u
54
info@dbp4switches.com
IND N
IND 2
IND 1
IND N
IND 2
IND 1
IND COM
IND COM
+V
COM RTN
LOGIC INPUT N
LOGIC INPUT 2
LOGIC INPUT 1
L
O
G
I
C
+V
COM RTN
BCD 8
BCD 4
BCD 2
BCD 1
D
R
I
V
E
R
Schematic M10
C
1
2
N
RF
IND N
IND 2
IND 1
IND COM
IND COM
PWR +COM
-N
-2
-1
PWR +COM
-N
-2
-1
C
1
2
N
RF
IND N
IND 2
IND 1
IND COM
IND COM
PWR COM
N
2
1
PWR +COM
-N
-2
-1
1
2
C
N
N
1
2
N
C
1
2
N
2
N
RF
Schematic M15
IND N
IND 2
IND 1
IND N
IND 2
IND 1
IND COM
IND COM
LOGIC INPUT N
LOGIC INPUT 2
LOGIC INPUT 1
2
RF
RF
Schematic M14
+V
COM RTN
1
RF
Schematic M13
IND N
IND 2
IND 1
C
C
Schematic M11
IND N
IND 2
IND 1
Schematic M12
D
B R
C I
D V
E
R
L
O
G
I
C
+V
COM RTN
D
R
I
V
E
R
BCD 8
BCD 4
BCD 2
BCD 1
C
1
2
C
N
1
RF
RF
Schematic M16
D
B R
C I
D V
E
R
Schematic M17
DBP MICROWAVE
www.dbp4switches.com u
55
info@dbp4switches.com
Logic and BCD Truth Tables
Single Line Logic Driver Truth Table for SPDT & Trans fer
Latching Sw itche s
Logic
Pos ition Activate d
0
2
1
1
Low Logic BCD Truth Table for SP3T to SP10T Sw itche s
Pos ition
Activate d
BCD 8
BCD 4
BCD 1
BCD 2
1
1
1
1
1
1
1
1
0
0
0
Open
1
1
1
1
0
0
0
0
1
1
0
Open
1
1
0
0
1
1
0
0
1
1
0
Open
1
0
1
0
1
0
1
0
1
0
0
Open
High Logic BCD Truth Table for SP3T to SP10T Sw itche s
Pos ition
Activate d
BCD 8
BCD 4
BCD 1
BCD 2
1
2
3
4
5
6
7
8
9
10
None or FS
None or FS
0
0
0
0
0
0
0
0
1
1
1
Open
0
0
0
0
1
1
1
1
0
0
1
Open
0
0
1
1
0
0
1
1
0
0
1
Open
0
1
0
1
0
1
0
1
0
1
1
Open
1
2
3
4
5
6
7
8
9
10
None or FS
None or FS
Low Logic Driver Truth Table for SPDT & Transfer
Latching Sw itche s
Logic 2
Logic 1
Pos ition Activate d
1
0
1
0
1
2
High Logic Driver Truth Table for SPDT & Transfer
Latching Sw itche s
Logic 2
Logic 1
Pos ition Activate d
0
1
1
1
0
2
Low Logic Driver Truth Table for SPDT & Transfer
Fails afe Sw itche s
Logic
Pos ition Activate d
0
Normally Open
1
Normally Closed
High Logic Driver Truth Table for SPDT & Transfer
Fails afe Sw itche s
Logic
Pos ition Activate d
1
Normally Open
0
Normally Closed
Low Logic Driver Truth Table for SP3T to SP10T Sw itche s
Pos ition
Activate d
Logic
10
1
1
1
1
1
1
1
1
1
0
1
Open
9
1
1
1
1
1
1
1
1
0
1
1
Open
8
1
1
1
1
1
1
1
0
1
1
1
Open
7
1
1
1
1
1
1
0
1
1
1
1
Open
6
1
1
1
1
1
0
1
1
1
1
1
Open
5
1
1
1
1
0
1
1
1
1
1
1
Open
4
1
1
1
0
1
1
1
1
1
1
1
Open
3
1
1
0
1
1
1
1
1
1
1
1
Open
2
1
0
1
1
1
1
1
1
1
1
1
Open
1
0
1
1
1
1
1
1
1
1
1
1
Open
1
2
3
4
5
6
7
8
9
10
None or FS
None or FS
High Logic Driver Truth Table for SP3T to SP10T Sw itche s
Pos ition
Activate d
Logic
10
0
0
0
0
0
0
0
0
0
1
0
Open
9
0
0
0
0
0
0
0
0
1
0
0
Open
8
0
0
0
0
0
0
0
1
0
0
0
Open
7
0
0
0
0
0
0
1
0
0
0
0
Open
6
0
0
0
0
0
1
0
0
0
0
0
Open
5
0
0
0
0
1
0
0
0
0
0
0
Open
4
0
0
0
1
0
0
0
0
0
0
0
Open
DBP MICROWAVE
3
0
0
1
0
0
0
0
0
0
0
0
Open
2
0
1
0
0
0
0
0
0
0
0
0
Open
1
1
0
0
0
0
0
0
0
0
0
0
Open
www.dbp4switches.com u
57
1
2
3
4
5
6
7
8
9
10
None or FS
None or FS
info@dbp4switches.com
“A” BRACKET
“B” BRACKET
“C” BRACKET
DBP MICROWAVE
www.dbp4switches.com u
58
info@dbp4switches.com
“U” BODY
Consult Factory for Dimension “A”
“V” BODY
DBP MICROWAVE
www.dbp4switches.com u
62
info@dbp4switches.com
FAILSAFE
SPDT
SPDT
SP3T - SP6T
PIN
TRANSFER TRANSFER
w/o
(Logic Input) INDICATORS
V SW;
1 +V SW
V SW; -V
2 SW
+V SW
N/A
LATCHING
SPDT
TRANSFER
SP3T - SP6T
SPDT
w/o
2R Series
INDICATORS (Logic Input)
(Logic Input)
V SW; +V SW; +V SW
+V SW
C+/-V SW
N/A
C RTN
N/A or
3 Ind COM
C RTN
Position 2
BCD 1
Logic or
4 Ind NC
Logic Input
Position 3
BCD 2
Logic 3 or
5 Ind NO
Ind COM
Position 4
BCD 4
Logic 4 or
6 N/A
Ind NC
Position 5
BCD 8
7 N/A
Ind NO
Position 6
Logic 5
8 N/A
N/A
N/A
Logic 6
9 N/A
N/A
N/A
N/A
SPDT Series: 2S, 2SE, 2R, 2RE, 2T, 2N, 2NH, 2B, 2BE, 2C, 2CE
Transfer Series: TA, TAE, TD, TDE, TS, TSE, TT, TN, TNH
SP3T - SP6T Series: SS, SSE, ST, SN, SNH, IT, ITE
+5 Vdc
Position 1 -/+ N/A
Postion 1
CRTN
Position 2 -/+ C RTN
Position 2
Logic
Ind COM
Position 3
Ind COM
Ind Position 1 Ind COM
Position 4
Ind Position 1
Ind Position 2
N/A
N/A
Ind Position 2
N/A
N/A
N/A
Position 5
Position 6
N/A
N/A
NORMALLY
FAILSAFE
OPEN/LATCHING
PIN SP3T - SP6T SP3T - SP6T SP3T - SP6T SP3T - SP6T
w/
w/
w/
w/
INDICATORS INDICATORS INDICATORS INDICATORS
(Logic Input)
(Logic Input)
V SW; +V SW; +V SW
V SW; +V SW; +V SW
1 -V SW
-V SW
2 N/A
C RTN
Position 1
C RTN
N/A or
Logic or
3 Position 2
BCD 1
Position 2
BCD 1
Logic or
Logic or
4 Position 3
BCD 2
Position 3
BCD 2
Logic 3 or
Logic 3 or
5 Position 4
BCD 4
Position 4
BCD 4
Logic 4 or
Logic 4 or
6 Position 5
BCD 8
Position 5
BCD 8
7 Position 6
Logic 5
Position 6
Logic 5
8 Ind COM
Logic 6
Ind COM
Logic 6
9 Ind FS
Ind COM
Ind Position 1 Ind COM
10 Ind Position 2 Ind FS
Ind Position 2 Ind Position 1
11 Ind Position 3 Ind Position 2 Ind Position 3 Ind Position 2
12 Ind Position 4 Ind Position 3 Ind Position 4 Ind Position 3
13 Ind Position 5 Ind Position 4 Ind Position 5 Ind Position 4
14 Ind Position 6 Ind Position 5 Ind Position 6 Ind Position 5
15 N/A
Ind Position 6 N/A
Ind Position 6
SP3T - SP6T Series: IT, ITE, SN, SNH, ST
FAILSAFE
NORMALLY OPEN
PIN SP7T - SP10T SP7T - SP10T SP7T - SP10T SP7T - SP10T
w/
w/
w/
w/
INDICATORS INDICATORS INDICATORS INDICATORS
(Logic Input)
(Logic Input)
V SW; +V SW; +V SW
V SW; +V SW;
1 -V SW
-V SW
2 N/A
C RTN
Position 1
N/A or
3 Position 2
BCD 1
Position 2
Logic or
4 Position 3
BCD 2
Position 3
Logic 3 or
5 Position 4
BCD 4
Position 4
Logic 4 or
6 Position 5
BCD 8
Position 5
7 Position 6
Logic 5
Position 6
8 Position 7
Logic 6
Position 7
9 Position 8
Logic 7
Position 8
10 Position 9
Logic 8
Position 9
11 Position 10
Logic 9
Position 10
12 Ind COM
Logic 10
Ind COM
13 Ind FS
Ind COM
Ind Position 1
SP7T - SP10T Series: ES, HS, HN, HT
DBP MICROWAVE
NORMALLY OPEN /
LATCHING
SPDT
SP3T - SP6T SP3T - SP6T
TRANSFER
w/o
w/o
(Logic Input) INDICATORS INDICATORS
(Logic Input)
+V SW
V SW; +V SW; +V SW
-V SW
Logic Input
Ind Position 1
Ind Position 2
N/A
N/A
NORMALLY
FAILSAFE
OPEN/LATCHING
PIN SP7T - SP10T SP7T - SP10T SP7T - SP10T SP7T - SP10T
w/o
w/o
w/o
w/o
INDICATORS INDICATORS INDICATORS INDICATORS
(Logic Input)
(Logic Input)
V SW; +V SW; +V SW
V SW; +V SW; +V SW
1 -V SW
-V SW
2 N/A
C RTN
Position 1
C RTN
N/A or
Logic or
3 Position 2
BCD 1
Position 2
BCD 1
Logic or
Logic or
4 Position 3
BCD 2
Position 3
BCD 2
Logic 3 or
Logic 3 or
5 Position 4
BCD 4
Position 4
BCD 4
Logic 4 or
Logic 4 or
6 Position 5
BCD 8
Position 5
BCD 8
7 Position 6
Logic 5
Position 6
Logic 5
8 Position 7
Logic 6
Position 7
Logic 6
9 Position 8
Logic 7
Position 8
Logic 7
10 Position 9
Logic 8
Position 9
Logic 8
11 Position 10
Logic 9
Position 10
Logic 9
12 N/A
Logic 10
N/A
Logic 10
13 N/A
N/A
N/A
N/A
14 N/A
N/A
N/A
N/A
15 N/A
N/A
N/A
N/A
SP7T - SP10T Series: ES, HS, HN, HT
FAILSAFE
NORMALLY OPEN
PIN SP7T - SP10T SP7T - SP10T SP7T - SP10T SP7T - SP10T
w/
w/
w/
w/
INDICATORS INDICATORS INDICATORS INDICATORS
(Logic Input)
(Logic Input)
+V SW
C RTN
Logic or
BCD 1
Logic or
BCD 2
Logic 3 or
BCD 4
Logic 4 or
BCD 8
Logic 5
Logic 6
Logic 7
Logic 8
Logic 9
Logic 10
Ind COM
14 Ind Position 2
15 Ind Position 3
Ind Position FS Ind Position 2
Ind Position 2 Ind Position 3
Ind Position 1
Ind Position 2
16 Ind Position 4
Ind Position 3
Ind Position 4
Ind Position 3
17 Ind Position 5
Ind Position 4
Ind Position 5
Ind Position 4
18 Ind Position 6
Ind Position 5
Ind Position 6
Ind Position 5
19
20
21
22
23
24
25
Ind Position 6
Ind Position 7
Ind Position 8
Ind Position 9
Ind Position 10
N/A
N/A
Ind Position 7
Ind Position 8
Ind Position 9
Ind Position 10
N/A
N/A
N/A
Ind Position 6
Ind Position 7
Ind Position 8
Ind Position 9
Ind Position 10
N/A
N/A
Ind Position 7
Ind Position 8
Ind Position 9
Ind Position 10
N/A
N/A
N/A
www.dbp4switches.com u
63
C RTN
Logic or
BCD 1
Logic or
BCD 2
Logic 3 or
BCD 4
Logic 4 or
BCD 8
Logic 5
Logic 6
N/A
info@dbp4switches.com
072503
PIN
FAILSAFE
SPDT
SPDT
TRANSFER
TRANSFER
(Logic Input)
LATCHING
SPDT
SPDT
TRANSFER
TRANSFER
(Logic Input)
A V SW; +V SW +V SW
C+/B V SW; -V SW N/A
Position 1 -/+
C COM
C RTN
Position 2 -/+
D Ind NC
Logic Input
Ind COM
E Ind NO
Ind COM
Ind Position 1
F N/A
Ind NC
Ind Position 2
G N/A
Ind NO
N/A
H N/A
N/A
N/A
SPDT Series: 2A, 2AE, 2B, 2BE, 2C, 2CE
Transfer Series: TA, TAE, TD, TDE, TF, TFE
PIN
+V SW
C RTN
Logic Input 1
Logic Input 2
Ind COM
Ind Position 1
Ind Position 2
N/A
FAILSAFE
NORMALLY OPEN
SP3T - SP6T SP3T - SP6T SP3T - SP6T SP3T - SP6T
w/
w/
w/
w/
INDICATORS INDICATORS INDICATORS INDICATORS
(Logic Input)
(Logic Input)
V SW; +V SW; +V SW
V SW; +V SW;
A -V SW
-V SW
B N/A
N/A
Position 1
C Position 2
C RTN
Position 2
N/A or
D Position 3
BCD 1
Position 3
Logic or
E Position 4
BCD 2
Position 4
Logic 3 or
F Position 5
BCD 4
Position 5
Logic 4 or
G Position 6
BCD 8
Position 6
H Ind COM
Logic Input 5 Ind COM
J Ind FS
Logic Input 6 Ind Position 1
SP3T - SP6T Series: SS, SSE, ST, SN, SNH, IT, ITE
DBP MICROWAVE
NORMALLY OPEN
SP3T - SP6T SP3T - SP6T
w/
w/o
INDICATORS INDICATORS
(Logic Input)
+V SW
N/A
C RTN
Logic or
BCD 1
Logic or
BCD 2
Logic 3 or
BCD 4
Logic 4 or
BCD 8
Logic Input 5
Logic Input 6
FAILSAFE
NORMALLY OPEN
PIN SP7T - SP10T SP7T - SP10T SP7T - SP10T SP7T - SP10T
w/
w/
w/
w/
INDICATORS INDICATORS INDICATORS INDICATORS
(Logic Input)
(Logic Input)
V SW; +V SW; +V SW
V SW; +V SW;
A -V SW
-V SW
B N/A
N/A
Position 1
C Position 2
C RTN
Position 2
N/A or
D Position 3
BCD 1
Position 3
Logic or
E Position 4
BCD 2
Position 4
Logic 3 or
F Position 5
BCD 4
Position 5
Logic 4 or
G Position 6
BCD 8
Position 6
H Position 7
Logic 5
Position 7
J Position 8
Logic 6
Position 8
K Position 9
Logic 7
Position 9
L Position 10
Logic 8
Position 10
M Ind COM
Logic 9
Ind COM
N Ind FS
Logic 10
Ind Position 1
SP7T - SP10T Series: ES, HS, HN, HT
FAILSAFE
PIN SP3T - SP6T SP3T - SP6T
w/
w/
INDICATORS INDICATORS
(Logic Input)
K Ind Position 2
L Ind Position 3
M Ind Position 4
Ind COM
Ind FS
Ind Position 2
Ind Position 2
Ind Position 3
Ind Position 4
Ind COM
Ind Position 1
Ind Position 2
N Ind Position 5
Ind Position 3
Ind Position 5
Ind Position 3
P Ind Position 6
Ind Position 4
Ind Position 6
Ind Position 4
R N/A
Ind Position 5
N/A
Ind Position 5
S N/A
T N/A
U N/A
Ind Position 6
N/A
N/A
N/A
N/A
N/A
Ind Position 6
N/A
N/A
FAILSAFE
NORMALLY OPEN
PIN SP7T - SP10T SP7T - SP10T SP7T - SP10T SP7T - SP10T
w/o
w/
w/
w/
INDICATORS INDICATORS INDICATORS INDICATORS
(Logic Input)
(Logic Input)
+V SW
N/A
C RTN
Logic or
BCD 1
Logic or
BCD 2
Logic 3 or
BCD 4
Logic 4 or
BCD 8
Logic 5
Logic 6
Logic 7
Logic 8
Logic 9
Logic 10
P Ind Position 2
R Ind Position 3
S Ind Position 4
Ind COM
Ind FS
Ind Position 2
Ind Position 2
Ind Position 3
Ind Position 4
Ind COM
Ind Position 1
Ind Position 2
T Ind Position 5
Ind Position 3
Ind Position 5
Ind Position 3
U Ind Position 6
Ind Position 4
Ind Position 6
Ind Position 4
V
Ind Position 7
Ind Position 5
Ind Position 7
Ind Position 5
W
X
Y
Z
a
b
c
Ind Position 8
Ind Position 9
Ind Position 10
N/A
N/A
N/A
N/A
Ind Position 6
Ind Position 7
Ind Position 8
Ind Position 9
Ind Position 10
N/A
N/A
Ind Position 8
Ind Position 9
Ind Position 10
N/A
N/A
N/A
N/A
Ind Position 6
Ind Position 7
Ind Position 8
Ind Position 9
Ind Position 10
N/A
N/A
www.dbp4switches.com u
64
info@dbp4switches.com
072503
CW POWER CAPACITY VS. FREQUENCY GRAPH
This graph is based on the following conditions: ambient
temperature 40°C, sea level, VSWR 1:1 and cold switching.
4000
3000
HI
GH
PO
WE
RN
CO
NN
EC
TO
R
AVERAGE POWER INPUT-WATTS
2000
1000
900
800
700
600
ST
AN
DA
RD
N&
TN
CC
ON
NE
SM
CT
AC
OR
ON
NE
CT
OR
500
400
300
200
100
90
80
70
60
50
40
30
20
10
.1
.2
.4
.6 .8
1
2
4
6
8
10
14
18
26.5
FREQUENCY GHz
VSWR
1.5 : 1
2.0 : 1
2.5 : 1
3.0 : 1
Derating Factor
0.96
0.88
0.84
0.75
VSWR
3.5 : 1
4.0 : 1
4.5 : 1
5.0 : 1
Derating Factor
0.70
0.64
0.60
0.56
Consult Factory for derating factor w hen application does not meet the foregoing referenced conditions.
DBP MICROWAVE
www.dbp4switches.com u
4
info@dbp4switches.com
TESTING & GENERAL SPECIFICATIONS
TESTING
ISOLATION: Testing to published specifications or customer’s specifications, if requested.
INSERTION LOSS: Testing to customer’s specifications, if requested.
VSWR: Testing to published specificationsor customer’s specifications, if requested.
BURN-IN CYCLING: Performed on a 100% basis. This test actuates each switch position for a minimum of 5,000 cycles. This test is
designed to eliminate high wear in the early life stage of the switch.
MONITORED CYCLING: Performed on a 100% basis. To ensure repeatability each switch position is resistance monitored for a minimum
of 1, 000 operations. Any reading greater than 100 milli-ohms constitutes a failure to DBP Microwave internal standards. MIL-DTL-3928
allows RF contact resistance of 240 milli-ohms, but we believe our stricter standard yields more reliable switches.
FINAL TESTING: Performed on a 100% basis.
1.
Verify pull-in voltage. In-house criteria for pull-in voltage is 75% of the specified switch voltage.
Note: This is a one-time measurement of a unit that has been properly stabilized at 25°C. Pull-in voltage can be a
rather uncertain number due to critical temperature considerations. The self-heating of the coil(s) can change pull-in
measurement results significantly in a very short time.
2.
Verify orientation and dimensions per applicable specifications.
3.
Functional testing of all switch functions.
INSULATION RESISTANCE: Performed on a 100% basis. Tests the insulation resistance between the chassis and all switch terminals.
Resistance greater than 2 Giga-ohms at 50 Vdc is required.
SPECIAL TESTING: Is available upon request. Please contact factory.
GENERAL SPECIFICATIONS
ACTUATION: DBP Microwave switches are RF devices, the
impedance match is lost if more than one position is actuated
simultaneously. Simultaneous actuation of more than one position is
not recommended and under certain circumstances may damage the
switch. Please consult factory.
FINISH: Electroless Nickel Per MIL-C-26074. Contact Factory if
different finish is required.
RF CONTACTS: Beryllium Copper, Gold plated per MIL-G-45204
over a Nickel undercoating.
STORAGE TEMPERATURE: -55°C to +100°C.
DC TERMINAL FUNCTION LEGEND
TOLERANCES: Unless otherwise specified. Dimensions are in
inches.
N/A
AV
C
C+/+V SW
C RTN
XX: +/- 0.03
XXX: +/- 0.005
ANG: +/- 1°
INTERNAL TERMINATION RF POWER: 3WCW @ +85°C
L
PV
INTERNAL TERMINATION VSWR: 1.80 VSWR max. typical.
REPEATABILITY: 0.1 dB max. between positions.
AUXILIARY CONTACTS: (Indicators) rated at 250mA, 100 Vdc, 5W
max. (switching). Must use a series current limiting resistor.
COM
F/S
Not Applicable
Actuation Voltage
Actuation Voltage Common
Actuation Voltage Common with specified polarity
Positive Switch Actuation Voltage
Common Return for Actuation & Logic Voltage
Supplies
Logic Input (1= 3.5 - 5.5 Vdc; 0= 0 - 0.8 Vdc)
Pulse Voltage with specified polarity for latching
operation (20 msec min.)
Indicator Common
Failsafe Position (when applicable)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
TORQUE: Apply no more than 8 inch pounds of torque to install
mating connectors.
PULL-IN VOLTAGE: 75% of rated voltage at 25°C ambient room
temperature.
SUPPLY VOLTAGE: +/- 10% nominal.
MAGNETIC SENSITIVITY: SPDT switches - electromechanical
switches can be sensitive to ferrous materials and external magnetic
fields. Allow mounting no closer than 1/8” for neighboring ferrous
materials.
DBP MICROWAVE
www.dbp4switches.com u
65
info@dbp4switches.com
090903
DBP MICROWAVE
23301 Wilmington Ave.
Carson, CA 90745
Ph: 310-513-7200
Fx: 310-522-8994
RESULTS-ORIENTED CUSTOMER SERVICE
DBP Microwave is a compelling vendor choice if your company is driven by development and
delivery deadlines, including prior shipment notification.
Our friendly professionals who answer the phones are actively involved in the day to day operation
and work closely with the Field Sales Representatives to follow through on the best way to meet
your requirements. We take pride in our reputation for prompt responses and doing our best to
help our customers reduce costs through APOs, Corporate APOs, and special pricing packages.
WARRANTY
DBP Microwave’s switches are warranted against defects in material or workmanship for one full
year (12 months) from date of shipment. DBP Microwave’s obligation is limited to repair or
replacement of defective parts. We assume no liability for defects resulting from improper use,
operation beyond ratings or unauthorized repairs. Cosmetic conditions are not covered by this
warranty. DBP Microwave is not responsible for consequential damages. Warranty returns require
advance authorization. Please see “RETURNS.” No other warranties are expressed or implied.
Extended warranties are available at additional cost.
RETURNS
To return a product for warranty or non-warranty service please be sure to obtain prior
authorization. DBP Microwave will issue a Return Material Authorization Number which must
appear on the paperwork accompanying the return as well as the outside of the shipping
container. Please ship any return products prepaid to DBP Microwave unless prior arrangements
have been made. DBP Microwave does not accept COD freight charges for returned items.
OUR COMMITMENT TO YOU
DBP Microwave wants to assist you in selecting The Right Switch for the Right Application.
Please feel free to contact us to discuss any environmental or other application concerns you may
have. For the best overall switch value in terms of quality, price and support, DBP Microwave’s
engineering and customer support teams are standing ready to assist you with cost-effective
solutions.
SALES REPRESENTATION
Worldwide Representation is available. Please check our website to locate your local Sales
Representative.
Web Site: dbp4switches.com
e-mail: info@dbp4switches.com