VOLUME IV OF V
LIGHT FIXTURE CUT SHEETS
FOR
ATLANTA AIRPORT AC HOTEL
COLLEGE PARK, GEORGIA
FOR
CHOICE GATEWAY LLC
56 PERIMETER CENTER EAST
SUITE 450
ATLANTA, GEORGIA 30346
COMMISSION NO. 216014.00
11 JUL 16 - ISSUED FOR PERMIT
VOLUME IV OF V
00 01 10 TABLE OF CONTENTS
DIVISION 26
ELECTRICAL
PAGES
Light Fixture Cut Sheets
26
END
Atlanta Airport AC Hotel
216014.00 - © Copyright 2016 Smallwood, Reynolds, Stewart, Stewart & Associates, Inc. Atlanta, Georgia
Table of Contents Volume IV of V
00 01 10.1
Description
Mounting
Housing
Recessed Square Aperture Lensed Wallwash
Recessed mounted in gyp ceiling. Coordinate mounting requirements with ceiling type and
field conditions.
4.5” Square aperture with nominal 10” x 14” x 5” deep heavy gauge cold rolled steel
recessed housing with die-cast aluminum heat sink LED module housing.
Trim / Finish
Painted overlap trim - custom color TBD
Performance
Provide with wallwash distribution.
Lamp
Integrated LED
1400 Lumens, 3000°K, 97 CRI
Lamp Qty
Volts
By EE
Max Wattage
21
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output.
Manufacturer
Amerlux
Catalog #
Alternate Manufacturer
E4.75S-A14 21 LED XXX 0-10V / E4.75SLW-A14 SLVW WW 3000-97
Gotham Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
AL1
Date 07.11.16
Description
Mounting
Housing
Recessed Square Aperture Adjustable Accent Light
Recessed mounted in gyp ceiling. Coordinate mounting requirements with ceiling type and
field conditions.
4.5” Square aperture with nominal 12” x 14” x 8” deep heavy gauge cold rolled steel
recessed housing with die-cast aluminum heat sink LED module housing.
Trim / Finish
Painted overlap trim - custom color TBD
Performance
Provide with 25° beam distribution.
Lamp
Integrated LED
1400 Lumens, 3000°K, 97 CRI
Lamp Qty
Volts
By EE
Max Wattage
21
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output.
Manufacturer
Amerlux
Catalog #
Alternate Manufacturer
E4.75S-C3 21 LED XXX FL 3000-97 0-10V / E4.75SA-C3 SLVW
Gotham Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
AL2
Date 07.11.16
Description
Recessed Square Aperture Lensed Wallwash
Mounting
Recessed mounted in gyp ceiling. Coordinate mounting requirements with ceiling type and
field conditions.
Housing
2.9” Square aperture with nominal 8” x 12” x 6” deep heavy gauge cold rolled steel recessed
housing with die-cast aluminum heat sink LED module housing.
Trim / Finish
Painted overlap trim - custom color TBD
Performance
Provide with wallwash distribution.
Lamp
Integrated LED
900 Lumens, 3000°K, 97 CRI
Lamp Qty
Volts
By EE
Max Wattage
18
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output.
Manufacturer
Amerlux
Catalog #
Alternate Manufacturer
E2.9SLW-HP-A15 18 LED XXX GB 3000-97 0-10V / E2.9SLW-HP-A15 SLVW
Gotham Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
AL3
Date 07.11.16
Description
RGBW Color Changing LED Cove Light
Mounting
Surface mounted within architectural cove light. Coordinate mounting requirements with
architectural detail drawings and field conditions.
Housing
Nominal 0.75” wide by 0.25” high contiguous run of LED tape within extruded aluminum
channel.
Trim / Finish
Natural Aluminum
Performance
Provide with 120° beam distribution.
Lamp
Integrated LED
RGBW
Lamp Qty
Volts
By EE
Max Wattage
5W / LF
Control Gear
Remote DMX / RDM Driver. Coordinate driver location with manufacturer’s
recommendations and architect in field Provide with touch panel DMX controller.
Manufacturer
Acclaim Lighting
Catalog #
Alternate Manufacturer
Remarks /Notes
Flex Spectrum Interior Series
FlexSI / ALD-800-24 / FLX444
Acolyte Lighting
Provide with all the necessary accessories and
appurtenances for a complete, operational and code
compliant installation.
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
CL2
Date 07.11.16
Description
Mounting
Housing
Recessed Square Aperture Down Light
Recessed mounted in gyp ceiling. Coordinate mounting requirements with ceiling type and
field conditions.
4.5” Square aperture with nominal 12” x 14” x 6” deep heavy gauge cold rolled steel
recessed housing with die-cast aluminum heat sink LED module housing.
Trim / Finish
Painted overlap trim - custom color TBD
Performance
Provide with 25° beam distribution.
Lamp
Integrated LED
1400 Lumens, 3000°K, 97 CRI
Lamp Qty
Volts
By EE
Max Wattage
21
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output.
Manufacturer
Amerlux
Catalog #
Alternate Manufacturer
E4.75S-A15 21 LED XXX 0-10V / E4.75SA-A15 SLVW FL 3000-97
Gotham Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
DL1
Date 07.11.16
Description
Recessed Square Aperture Down Light
Mounting
Recessed mounted in gyp ceiling. Coordinate mounting requirements with ceiling type and
field conditions.
Housing
3” Square aperture with nominal 8” x 12” x 6” deep heavy gauge cold rolled steel recessed
housing with die-cast aluminum heat sink LED module housing.
Trim / Finish
Painted overlap trim - custom color TBD
Performance
Provide with 20° beam distribution.
Lamp
Integrated LED
1000 Lumens, 3000°K, 97 CRI
Lamp Qty
Volts
By EE
Max Wattage
18
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output.
Manufacturer
Amerlux
Catalog #
Alternate Manufacturer
E2.9SD-HP-A15 18 LED XXX GB 0-10V / E2.9SD-HP-A15 SLVW NF 3000-97
Gotham Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
DL2
Date 07.11.16
Description
Mounting
Housing
Recessed Round Aperture Up Light
Recessed mounted in architectural niche. Coordinate mounting requirements with
architectural detail drawings and field dimensions.
Nominal 2” diameter by 2” deep cast aluminum machined stainless steel housing with clear
glass lens.
Trim / Finish
Stainless Steel
Performance
Provide with 12° beam distribution.
Lamp
Integrated LED
100 Lumens, 3000°K, 97 CRI
Lamp Qty
Volts
By EE
Max Wattage
3.0W
Control Gear
Remote Electronic Dimming Driver. Coordinate driver location with manufacturer’s
recommendations and architect in field Coordinate driver with control system for smooth
dimming curve from 1% to 100% full light output.
Manufacturer
MP Lighting
Catalog #
L01 Series
L01 2 W30H S C LB X DC S 0 S6
Alternate Manufacturer
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
DL3
Date 07.11.16
Description
Mounting
Housing
Ingrade LED Linear Wallwash
Recessed mounted in floor. Coordinate mounting requirements with architectural detail
drawings and field dimensions.
4” by 12” aperture flush with finished floor. Nominal 8” by 13” by 5.5” deep cold rolled steel
in slab housing with extruded aluminum, removable LED Lamp module.
Trim / Finish
Natural Aluminum
Performance
Provide with wallwash distribution.
Lamp
Integrated LED
600 Lumens, 3000°K, 97 CRI
Lamp Qty
Volts
By EE
Max Wattage
8.5W
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output.
Manufacturer
Lumenpulse
Catalog #
Lumenfacade Inground Series
LOI RO XXX 12 30K WW Dim ASL
Alternate Manufacturer
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
FL1
Date 07.11.16
Description
Mounting
Housing
Trim / Finish
Recessed LED Gray Scale Troffer
Recessed mounted in acoustical ceiling. Coordinate mounting requirements with ceiling
type and field dimensions.
Nominal 8” wide by 24” by 3.5” deep combination cold rolled steel housing with high-impact,
90% transmissive acrylic panes. Fixtures are mounted in varying rows of either 3 panes or
6 panes. Refer to architectural drawings for patterns.
TBD
Performance
Lamp
Integrated LED
1320 Lumens, 3000°K, 97 CRI
Lamp Qty
Volts
By EE
Max Wattage
20W
Control Gear
Integral dimming and gray scale control via nLight control driver. Coordinate driver with
control system for smooth dimming curve from 1% to 100% full light output.
Manufacturer
Mark Lighting
Catalog #
Rubik Series
3CS XX 90CRI 30K GRSC 440LM MIN1 NLight XXX
Alternate Manufacturer
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
GL2
Date 07.11.16
Description
Mounting
Housing
Recessed Linear LED Wall Graze
Surface mounted within architectural cove light. Coordinate mounting requirements with
architectural detail drawings and field conditions.
Nominal 0.6” wide by 0.75” high contiguous run of LED tape within extruded aluminum
channel. Provide with adjustable, lockable bracket to aim fixture and lock into fixed position.
Trim / Finish
Painted - Matte White
Performance
Provide with 20° beam distribution.
Lamp
Integrated LED
440 Lumens / LF, 3000°K, 97 CRI
Lamp Qty
Volts
by EE
Max Wattage
5W / LF
Control Gear
Remote Electronic Dimming Driver. Coordinate driver location with manufacturer’s
recommendations and architect in field Coordinate driver with control system for smooth
dimming curve from 1% to 100% full light output.
Manufacturer
Acolyte
Catalog #
Alternate Manufacturer
Ribbonlyte 5.0 Series
CH AS20G 24 5.0 30K HI XX
Acclaim Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
LL1
Date 07.11.16
Description
Mounting
Housing
Recessed Linear LED Wall Graze
Surface mounted within architectural cove light. Coordinate mounting requirements with
architectural detail drawings and field conditions.
Nominal 2.5” wide by 2.75” high contiguous 14’ run of extruded aluminum channel. Provide
with adjustable, lockable bracket to aim fixture and lock into fixed position.
Trim / Finish
Painted - Matte White
Performance
Provide with 10° x 60° beam distribution.
Lamp
Integrated LED
900 Lumens / LF, 3000°K, 97 CRI
Lamp Qty
Volts
by EE
Max Wattage
9W / LF
Control Gear
Integrated Electronic Dimming Driver. Coordinate driver with control system for smooth
dimming curve from 1% to 100% full light output.
Manufacturer
Lumenpulse
Catalog #
Alternate Manufacturer
Lumenfacade Series
LOGi RO XXX 14’ 30K 10x60 UMAS WH Dim
Acclaim Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
LL2
Date 07.11.16
Description
Mounting
Housing
Linear LED Millwork Accent Light
Surface mounted within vanity niche. Coordinate mounting requirements with architectural
detail drawings and field conditions.
Nominal 0.7” wide by 0.35” high contiguous run of LED tape within extruded aluminum
channel.
Trim / Finish
Painted - Matte White
Performance
Provide with 120° beam distribution.
Lamp
Integrated LED
275 Lumens / LF, 3000°K, 97 CRI
Lamp Qty
Volts
by EE
Max Wattage
3W / LF
Control Gear
Remote Electronic Driver. Coordinate driver location with manufacturer’s recommendations
and architect in field
Manufacturer
Acolyte
Catalog #
Alternate Manufacturer
Ribbonlyte 3.0 Series
CH AS1 24 3.0 27K HI XX
Acclaim Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
LL3
Date 07.11.16
Description
Mounting
Housing
Linear LED Millwork Accent Light
Surface mounted within millwork shelves. Coordinate mounting requirements with
architectural detail drawings and field conditions.
Nominal 0.7” wide by 0.35” high contiguous run of LED tape within extruded aluminum
channel. Provide with milk white acrylic lens.
Trim / Finish
Painted - Matte White
Performance
Provide with 120° beam distribution.
Lamp
Integrated LED
440 Lumens / LF, 3000°K, 97 CRI
Lamp Qty
Volts
by EE
Max Wattage
5W / LF
Control Gear
Remote Electronic Dimmer Driver. Coordinate driver with control system for smooth
dimming curve from 1% to 100% full light output. Coordinate driver location with
manufacturer’s recommendations and architect in field
Manufacturer
Acolyte
Catalog #
Alternate Manufacturer
Ribbonlyte 5.0 Series
CH AS1 M 24 5.0 27K HI XX
Acclaim Lighting
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
LL4
Date 07.11.16
Description
2-Lamp Multiple Head Adjustable Accent Light
Mounting
Recessed mounted in gyp ceiling. Coordinate mounting requirements with ceiling type and
field conditions.
Housing
4.5” by 9” rectangular aperture. Nominally 12” x 6” x 7” cold rolled steel housing painted
matte black. Provide with (2) adjustable and lockable heads. Fully adjustable 35° tilt and
360° rotation.
Trim / Finish
Painted - Silver Texture
Performance
Provide with 23° beam distribution.
Lamp
Lamp Qty
Volts
Integrated LED
21W 1850 Lumens, 3000K 97CRI
2
BY EE
Max Wattage
42
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output.
Manufacturer
Amerlux
Catalog #
Alternate Manufacturer
Cylindrix III Mini Series
C3MR/SR-Frame 2 LED XXX 0-10V / C3MR-Trim 2 21 LED ST XXX NF WT 3000-97 SN
Lumenpulse
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
ML1
Date 07.11.16
Description
3-Lamp Multiple Head Adjustable Accent Light
Mounting
Recessed mounted in gyp ceiling. Coordinate mounting requirements with ceiling type and
field conditions.
Housing
4.5” by 14” rectangular aperture. Nominally 16” x 6” x 7” cold rolled steel housing painted
matte black. Provide with (3) adjustable and lockable heads. Fully adjustable 35° tilt and
360° rotation.
Trim / Finish
Painted - Silver Texture
Performance
Provide with (2) 34° beam distribution and (1) 23° beam distribution.
Lamp
Lamp Qty
Volts
Integrated LED
21W 1850 Lumens, 3000K 97CRI
3
BY EE
Max Wattage
63
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output. Provide with (2) drivers / control channels. (1) for
outer flood lamps and (1) for middle spot lamp.
Manufacturer
Amerlux
Catalog #
Alternate Manufacturer
Cylindrix III Mini Series
C3MR/SR-Frame 3 LED XXX 0-10V / C3MR-Trim 3 21 LED ST XXX FL-NF-FL WT 3000-97
Lumenpulse
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
ML2
Date 07.11.16
Description
Mounting
Housing
Decorative Pendant - Specified by Interior Designer Owner Furnished Contractor Installed
Pendant mounted to recessed junction box.
TBD
Trim / Finish
Performance
Lamp
LED - TBD
Lamp Qty
Volts
Max Wattage
50W
Control Gear
Integral 0-10V dimming driver. Coordinate driver with control system for smooth dimming
curve from 1% to 100% full light output.
Manufacturer
Owner Furnished Contractor Installed
Catalog #
Alternate Manufacturer
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
PL1
Date 07.11.16
Description
Mounting
Housing
Linear LED Indirect / Direct Pendant
Pendant mounted to recessed junction box.
Nominal 1.5” wide by 4.5” high by 4’, 8’ and 12’ lengths extruded and machined aluminum
housing with precision molded high transmittance acrylic lenses and anidolic optical
structures. . Refer to architectural drawings for lengths and quantities.
Trim / Finish
Painted - Matte White
Performance
Provide 70% up and 30% down distribution.
Lamp
Integrated LED
3700 Lumens / 4’ section, 3000°K, 97 CRI
Lamp Qty
Volts
BY EE
Max Wattage
38W
Control Gear
Integral 0-10V dimming driver. Coordinate nLight control system for smooth dimming for
daylight harvesting. Provide photo sensor in ceiling.
Manufacturer
Fluxwerx
Catalog #
View Series
VU1 B A C 30 W XX D E1 M 03
Alternate Manufacturer
Remarks /Notes
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
PL2
Date 07.11.16
Description
Mounting
Housing
Surface Mountain Underwater Linear Fountain Light
Surface mounted to bottom of fountain. Coordinate mounting requirement with
manufacturer recommendations and field conditions.
nominal 4” diameter stainless steel housing and clear acylic lens. Provide with short stand
for mounting to found base.
Trim / Finish
Stainless Steel
Performance
Provide with 8° beam distribution.
Lamp
Integrated LED
4000°K 90+CRI
Lamp Qty
Volts
By EE
Max Wattage
90W
Control Gear
Remote Electronic Dimmer Driver. Coordinate driver with control system for smooth
dimming curve from 1% to 100% full light output. Coordinate driver location with
manufacturer’s recommendations and architect in field
Manufacturer
Winona
Catalog #
W6800 Series
Alternate Manufacturer
Remarks /Notes
Provide (3) 30” sections with 6” betwen each section.
Project::
AC Hotel
Atlanta Int’l Airport
Atlanta, GA
Type:
UL1
Date 07.11.16
TYPE XL1
Date:
Approved:
Type:
Fixture:
Project:
FCCSQ410W
4" Round Wall, Pendant or Surface
Mounted Die-Cast Aluminum Cylinder
with Up and Down Light.
ORDERING
EXAMPLE: FCCSQ410WX2-120V-3K-750-BK-UNFL-DNFL
SERIES
VOLTAGE SOURCE TEMPERATURE
FCCSQ410W 120V
277V
347Vr
LED
3K
4K
FINISH
LED OPTICS
750 Lumens (8.5W) @ direction
LAMP
BK
UP
800 Lumens (10W) (1 direction only)
BZ
1200 Lumens (13.5W) (1 direction only) SL
BY EE
Black
ACCESSORIES
DOWN
LED Dimming (0-10V)
Bronze
USP
Spot
EC
E-Coat
SIlver
UNFL Narrow Flood DNFL
Narrow Flood
EMR
Emergency Backup, Remote
Flood
APL
Additional Pendant Length
Spot
WH
White
UFL
CC
Custom
Color
UWFL Wide Flood
Flood
DSP
LD
DFL
DWFL Wide Flood
SPECIFICATION
MOUNTING
•
Mounts directly to standard recessed junction box. Additional mounting holes allow unit to be attached directly to mounting surface.
CONSTRUCTION
•
•
•
Marine grade, corrosion resistant, heavy walled, high pressure die-cast aluminum with die-cast back mounting plate.
Lens is 1/4” thick clear, tempered glass. Precision formed semi-specular aluminum for maximum reflectance.
Continuous silicone gasket to seal out contaminants. Hidden fasteners allow for cover removal to facilitate installation and service.
LED
•
Lumens stated are the minimum delivered out of the luminaire. LED lifetime is 70,000+ hours with the lumen depreciation greater than
L70. All of our luminaires are LM-80 tested, are ≥ CRI 80 and have a 4-step MacAdam Ellipse color consistency. Integral power supply
standard. Input voltage 120V or 277V standard. Consult factory for other voltages and any single color options.
FINISH
•
•
Six stage chemical pre-treatment process that includes iron phosphate, to prepare the substrate for a UV stable, super durable
standard polyester powder coat.
Optional e-coat process is added to the standard finish including zinc phosphate for a 5 year limited warranty.
ELECTRICAL
•
Ballast UL listed ballast standard. Ballast has a manufacturer issued 5 year warranty. Please consult factory for other voltage options.
LISTING
•
UL & cUL listed for damp location in down position. IP65 Rating.
FC Lighting, Inc. reserves the right to change, without notice, details or specifications in product design. Product use certifies agreement to FC Lighting’s terms and conditions.
© 2016 FC Lighting, Inc. 3609 Swenson Ave., St. Charles, IL 60174
p. 800-900-1730 f. 630-889-8106
www.fclighting.com
RF Rev. 516
TYPE XL1
DIMENSIONS
FCCSQ410
FCCSQ410P
FCCSQ410W
18 in, standard
10 in
4.5 in
10 in
10 in
5.5 in
4.5 in
4.5 in
7.1 in
4.5 in
4.5 in
3.6 in
4.5 in
FC Lighting, Inc. reserves the right to change, without notice, details or specifications in product design. Product use certifies agreement to FC Lighting’s terms and conditions.
© 2015 FC Lighting, Inc. 3609 Swenson Ave., St. Charles, IL 60174
p. 800-900-1730 f. 630-889-8106
www.fclighting.com
MT Rev. 815
TYPE XL2
EL CAPITAN™
with
TECHNOLOGY
PROJECT:
TYPE:
CATALOG NUMBER:
SOURCE:
NOTES:
CATALOG NUMBER LOGIC
EC
LED
Example -EC- LED -e65- SP - A7 - BLW - 12 - 11 -
B
Material
Steel
Blank - Aluminum B -Brass
S -Stainless
Series
EC - El Capitan Series™
Source
LED-‘e’ Technology with Integral Dimming Driver (See Specifications for Dimming)
Designed for use with remote 12VAC BKSSL® transformers. Requires magnetic Low Voltage dimmer.
LED Type
e64 -7WLED/2.7k
e65 -7WLED/3k
e66 -7WLED/4k
e74 -7WLED/Amber
Optics*
NSP - Narrow Spot (Red Indicator)
SP - Spot (Green Indicator)
MFL - Medium Flood (Yellow Indicator)
WFL - Wide Flood (Blue Indicator)
Adjust-e-Lume® Output Intensity (Choose factory setting)
A9 (Standard), A8, A7, A6, A5, A4, A3, A2, A1
Finish
Aluminum Finish
Powder Coat Color
Premium Finish
Brass Finish
Satin
Wrinkle
Machined
MAC
Polished
POL
MitiqueTM
MIT
Bronze
BZP
BZW
Black
BLP
BLW
White (Gloss)
WHP
WHW
Aluminum
SAP
—
Verde
—
VER
Stainless Finish
MAC
Machined
POL
BRU
Polished
Brushed
Interior use only.
ABP
CMG Cascade Mountain Granite RMG Rocky Mountain Granite
AMG Aleutian Mountain Granite
CRI
SDS
AQW Antique White
CRMCream
SMG Sierra Mountain Granite
BCM Black Chrome
HUG Hunter Green
TXF
BGEBeige
MDS Mojave Desert Sandstone
WCP Weathered Copper
BPP
NBP
WIR
CAP
Antique Brass Powder
Brown Patina Powder
Clear Anodized Powder
OCP
Cracked Ice
Natural Brass Powder
12 - Soft Focus Lens
Textured Forest
Weathered Iron
Also available in RAL Finishes
See submittal SUB-1439-00
Old Copper
Lens Type
Sonoran Desert Sandstone
13 - Rectilinear Lens
Shielding
11 - Honeycomb Baffle*
Cap Style
A-45° B-90° C- Flush D-45° less Weep Hole
(Interior Use Only) E-90° less Weep Hole
F-90° cutoff with Flush Lens
(Interior Use Only)
*Accommodates up to 2 Lens/Shielding media
DRIVER DATA
Input Volts
InRush Current
Operating Current
Dimmable
Operation Ambient Temperature
12VAC/DC 50/60Hz
250mA (non-dimmed)
700mA
Magnetic Low Voltage Dimmer
-10°F-130°F
LM79 DATA
L70 DATA
*OPTICAL DATA
BK No.
CCT (Typ.)
Input Watts (Typ.)
(Typ.)
CRI
Minimum Rated Life (hrs.)
70% of initial lumens(L70)
­Beam Type
Angle
e66
CBCP
e64
2700K
7.0
80
50,000
Narrow Spot
13°
6889
Red Dot
e65
3000K
7.0
80
50,000
Spot
15°
5225
Green Dot
e66
4000K
7.0
80
50,000
Medium Flood
23°
1984
Yellow Dot
e74
Amber (590nm)
7.0
~
50,000
Wide Flood
31°
1300
Blue Dot
B-K LIGHTING
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
RELEASED
06-06-16
Visual Indicator
DRAWING NUMBER
SUB000942
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
(95mm)
7"
(178mm)
Patent Pending
Adjust-e-Lume®
6"
(152mm)
Patent Pending
Adjust-e-Lume®
6"
(152mm)
(38mm)
"A"CAP
3/8"
(10mm)
2 7/8"
(73mm)
with
TECHNOLOGY
PROJECT:
1"
(25mm)
2 1/4" Dia.
(57mm)
TYPE:
4"
(102mm)
"B"CAP
3/8"
(10mm)
FRONT VIEW
3/8"
(10mm)
Patent Pending
Adjust-e-Lume®
2-1/4” CAPS
3"5"
(76mm)
(127mm)
7"
(178mm)
CANOPY DETAIL
3 1/2" O.C.
(89mm)
6"
(152mm)
Patent Pending
Adjust-e-Lume®
“C” CAP
3/8"
(10mm)
(10mm)
MINI MICRO CAPS
2 1/4" Dia.
(57mm)
2 1/4"Dia.
(57mm)
4"
(102mm)
2 3/4"
4"
“B/E/F”
CAP
(102mm)
(69mm)
3/8"
4"
(102mm)
6 1/2" Dia.
(165mm)
2"
(51mm)
"B"CAP
"C" CAP
“A/D” CAP
PO
EL CAPITAN™
5"
1 1/2"
(127mm)
4"
(102mm)
7"
(178mm)
3/8"
(10mm)
7"
(178mm)
4"
(102mm)
5"
(127mm)
4"
(102mm)
4"
(102mm)
1"
(25mm)
1"
(25mm)
2 1/4"Dia.
(57mm)
5" Dia.
(127mm)
2 1/4" Dia.
(57mm)
2 1/4" Dia.
(57mm)
2 1/4"Dia.
(57mm)
UNIVERSAL RING
2 1/4" Dia.
(57mm)
"A"CAP
"C" CAP
SIDE VIEW
3/8"
(10mm)
4"
(102mm)
"B"CAP
"C" CAP
4"
(102mm)
4"
(102mm)
3/8"
(10mm)
4"
(102mm)
3/8"
(10mm)
3/8"
(10mm)
4" Dia.
(102mm)
4"
(102mm)
3"
(76mm)
3"
(76mm)
5"
(127mm)
Patent Pending
Adjust-e-Lume®
6"
(152mm)
1/16"
(1.6mm)
4"
7"
(102mm)
(178mm)
Accessories
(Configure separately)
4"
(102mm)
5"
(127mm)
Remote options:
2 1/4" Dia.
(57mm)
1"
(25mm)
2 1/4" Dia.
(57mm)
2 1/4"Dia.
(57mm)
2 1/4"Dia.
(57mm)
TO BE LOCATED IN AN INTERIOR
UPMRM™
TR Series
ACCESSIBLE LOCATION
All dimensions indicated on this submittal are nominal.
2 1/4" Dia.
(57mm)
"C" CAP
"B"CAP
SPECIFICATIONS
3/8"
(10mm)
GreenSource Initiative™
4" components are made from recycled
Metal and packaging
(102mm)
materials. Manufactured using renewable solar energy,
3/8"
produced on site. Returnable to manufacturer at end of life
(10mm)
4"
to
ensure cradle-to-cradle handling. Packaging contains no
(102mm)
chlorofluorocarbons (CFC’s). Use of this product may qualify
for GreenSource efficacy and recycling rebate(s). Consult
3"
www.bklighting.com/greensource for program requirements.
(76mm)
Materials
2 1/4" Dia.
Furnished in Copper-Free
Aluminum (Type 6061-T6), Brass
(57mm)
(Type 360) or Stainless Steel (Type 316).
5"
(127mm)
Body
Fully machined from solid billet. Unibody design provides
enclosed, water-proof wireway and integral heat sink for
1" component life. High temperature, silicone ‘O’
maximum
(25mm)
Ring provides water-tight seal.
4"
(102mm)
"C" CAP
Cap
Fully machined. Accommodates [1] lens or louver media.
Choose from 45° cutoff (‘A’ or ‘D’), 1” deep bezel with
90° cutoff (‘B’ or ‘E’), flush lens (‘C’) cap styles, or 1” deep
cutoff with flush mounted lens (‘F’). ‘A’ and ‘B’ caps include
weephole for water and debris drainage. ‘D’ and ‘E’ caps
exclude weep-hole
and are for interior use only.
4"
(102mm)
Lens
3/8"
Shock
(10mm) resistant, tempered, glass lens is factory adhered
to fixture cap and provides hermetically sealed optical
compartment. Specify soft focus (#12) or rectilinear (#13) lens.
BKSSL®
Integrated solid state system with ‘e’ technology is scalable
for field upgrade. Modular design with electrical quick
disconnects permit field maintenance. High power,
4"
forward
throw source complies with ANSI C78.377 binning
3"
(102mm)
(76mm)
requirements. Exceeds ENERGY STAR® lumen maintenance
requirements. LM-80 certified components.
Contact Technical Sales if you require more stringent specifications.
4"
(102mm)
Integral, constant current driver. 12VAC/VDC input. 50/60Hz.
Proprietary input control scheme achieves power factor
correction and eliminates inrush current. Output, overvoltage, open-circuit, and short circuit protected. Inrush
current limited to <1A (non-dimmed). Conforms to Safety Std.
C22.2 No. 250.13-12.
Remote Transformer
For use with 12VAC
remote transformer or
magnetic transformers only. B-K Lighting cannot guarantee
performance with third party manufacturers’ transformers.
Wiring
Teflon® coated, 18AWG, 600V, 250° C rated and certified to
UL 1659 standard.
Dimming
Line voltage dimmable via magnetic low voltage dimmer.
For use with low voltage dimmer with dedicated neutral Hardware
conductor. For purposes of dimming: Remote magnetic Tamper-resistant, stainless steel hardware. Canopy
transformer with BKSSL® Power of ‘e’ technology loads mounting screws are additionally black oxide treated for
should be loaded to 25% of the transformer VA (watts) additional corrosion resistance.
rated value.
2 1/4" Dia. Finish
(57mm) StarGuard®, our exclusive RoHs compliant, 15 stage
Optics
Interchangeable OPTIKIT™ modules permit field changes chromate-free process cleans and conversion coats
to optical distribution. Color-coded for easy reference: aluminum components prior to application of Class ‘A’ TGIC
Narrow Spot (NSP) = Red. Spot (SP) = Green. Medium Flood polyester powder coating. Brass components are available
in powder coat or handcrafted metal finish. Stainless steel
1/4"Dia.
(MFL)2 (57mm)
= Yellow. Wide Flood (WFL) = Blue.
components are available in handcrafted metal finish.
Adjust-e-Lume® (Pat. Pending)
(Brushed finish for interior use only).
Integral electronics allows dynamic lumen response
at the individual fixture. Indexed (100% to 25% nom.) Warranty
lumen output. Maintains output at desired level or may 5 year limited warranty.
be changed as conditions require. Specify factory preset Certification and Listing
output intensity.
ITL tested to IESNA LM-79. UL Listed. Certified to CAN/CSA/
ANSI Standards. Suitable for indoor or outdoor use. Suitable
Installation
5” dia., machined canopy with stainless steel universal for use in wet locations. RoHs compliant. Made in USA.
mounting ring permits mounting to 4’’ octagonal
junction box (by others). Suitable for uplight or downlight
installation.
B-K LIGHTING
4"
(102mm)
®Teflon is a registered trademark of DuPont Corporation.
®Energy Star is a registered trademark of the United States Environmental
Protection Agency.
2 1/4" Dia.
(57mm)
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • info@bklighting.com
RELEASED
06-06-16
DRAWING NUMBER
SUB000942
TYPE XL3
ACCLAIM
LIGHTING
Project:
Type:
Order Code:
Quantity:
Y
Flex II Exterior
Client:
Flex II Exterior
2400K,
is 3W per foot, and features a lumen output of 184 per foot (@ 6000K). The combination of it’s high output and low
I AM ASSUMING A SILVER GRAY
METAL FINISH TO SKIN
SPECIFICATIONS
Color Temperature
2400K, 2700K, 3000K, 4000K, 6000K, Blue
Beam Angle
120º
Max Fixture Runs
16.4 ft, 5m (1 Spool)
Power Consumption
50W @ 16.4’ / Minimum 3W Per Foot
Lumens Per Foot
176 @ 3000K, 184 @ 6000K
Efficacy (lm/W)
42 @ 3000K, 44 @ 6000K
CRI
67 @ 3000K, 81 @ 6000K
Cut & Solder Joints
Located Every 2”
Housing
UV Coated, Flexible Silicone Jacket
Operating Temperature
-40°F to 122°F (-40°C to 50°C)
Operating Voltage
12VDC
Dimming
TRIAC via M Series Transformers + Compatible LVM Dimmer
Fixture Connectors
5mm Plug With Bare Wire Adaptor Included
Rating
IP 68, Wet Location / Submersible Up To 3’ (1m)
Warranty
3 Years
Weight
1 lbs (0.5 kg)
Dimensions
1
W 0.5” x H 0.18” x L 16.4’
(12.7 mm x 4.7 mm x 5000mm)
!
DIMENSIONS
16.4’ (5m)
0.5” (12.7mm)
3/16” (4.7mm)
www.acclaimlighting.com
Lumen measurements comply with IES LM-79-08 provided by a recognized, independent testing lab.
LM79 Photometry, LM80 LED source compliance documents, and IES files are available at www.acclaimlighting.com
TYPE XL3
ACCLAIM
LIGHTING
Flex II Exterior
FLEX2E
Project:
Type:
Order Code:
Quantity:
RY
ORDER CODES (*special order)
Client:
: Flex II Exterior 16.4 ft (5m) Spool
24 - 2400K*
27 - 2700K
3 - 3000K
4 - 4000K
6 - 6000K
B - Blue
VOLTAGE TO BE SELECTED BY ELEC.
ENG.
NON-DIMMING REMOTE TRANSFOMER
TO BE LOCATED IN INTERIOR
ACCESSIBLE LOCATION
INCLUDED COMPONENTS
Plastic Mounting Clips + Screws (10 pcs), End Caps (2 pcs)
Bare Wire Connection Adapter (1 pc)
RELATED COMPONENTS
APS.125.68DU
12VDC 60W IP68 cETLus Transformer, 120V-240VAC Input / 1 Spool Maximum
M60L12DC
12VDC 60W Dimmable Transformer, 120V AC Input / 1 Spool Maximum
M100L12DC
12VDC 100W Dimmable Transformer, 120V AC Input / 1 Spool Maximum
M150L12DC
12VDC 150W Dimmable Transformer, 120V AC Input / 2 Spools Maximum
M150L12DC-277V
12VDC 150W Dimmable Transformer, 277V AC Input / 2 Spools Maximum
FLX444
Low Profile Aluminum Flex Channel 4’, Optional 45º Bracket: FLX113 (4 pcs + Screws)
FLX777
Recessed Aluminum Flex Channel 4’, Optional Lens: FLX702 (Opal) / FLX715 (Frost) / FLX727 (Clear)
FLX888
Tall Profile Aluminum Flex Channel 4’, Optional Lens: FLX801 (Opal) / FLX813 (Frost) / FLX825 (Clear)
Mounting Options
FLX113 - 45º Bracket (4 pcs + Screws) / FLX111 - Channel Joint/Mount Clip (2 pcs + Screws)
Compatible dimmer list for M Series transformers can be found at www.acclaimlighting.com
WIRING (M Series Dimmable Transformers)
M150L12DC
FLEX II EXTERIOR 16.4’
1
12v Output
Red +
Blue 120v 60Hz Input
Maximum 25’ with 18/2 solid cable or higher, to be provided by others.
www.acclaimlighting.com
Lumen measurements comply with IES LM-79-08 provided by a recognized, independent testing lab.
LM79 Photometry, LM80 LED source compliance documents, and IES files are available at www.acclaimlighting.com
V1.4 : Revised 10.29.14
TYPE XL4
PARADOX 4
CATALOG
NUMBER
4” Architectural In-Grade
LED (Line Voltage)
NOTES
TYPE
DESCRIPTION
Specifications
L:
5”
127 mm
4”
102 mm
8”
203 mm
W:
H:
Hydrel’s PDX4 Paradox Series sealed ingrade
luminaire is a multi-purpose unit designed for up
lighting architectural and landscape features. These
luminaires can be flush mounted into a variety
of substrates including concrete, tile, mulch and
decking.
The PDX4 is IC rated up to 35 watts for wood or
insulation applications
Suitable For Wet Locations
EXAMPLE: PDX4 B 9LED WHT30K MVOLT SP FLC 12S TKO
ORDERING INFORMATION
Model*
Material*
LED Array*
LED Color*
Voltage*
Distribution*
PDX4
SS
Stainless Steel
9LED
WHT53K
Cool White
1201,3
SP
Spot
BSS
Brushed Stainless
Steel
WHT41K
Neutral White
MVOLT2
MFL
Medium Flood
WHT30K
Warm White
Bronze
AMB
Amber
BLU
Blue
GRN
Green
RED
Red
B
SELECT
Lens*
Conduit Entries*
Internal Tilt Kit
Options
Listing
FLC
Flat Lens Clear
12S
Two 1/2” NPT Side (Standard)
TKO
IDIM
IEC 4
FLCAS
Flat Lens Clear, Anti-Slip
12B
FLCSR3
Flat Lens Frosted, Slip Resistant
Two 1/2” NPT Bottom (will include side
entries as well)
20S4
Two M20X 1,5 Side (Standard with IEC)
20B4
Two M20X 1,5 Bottom (will include side
entries as well)
4"
(102)
Tilt Kit Optic
In-line dimming
120 volt only
International
Electrotechnical
Commission
*Required Catagories
Notes:
1 120 Volt power supply is magnetic and dimmable using standard
incandescent dimming controls when ordered with IDIM option.
2 MVOLT = 120-277 electronic power supply, non-dimmable.
3 Meets ADA requirements for coefficient of friction.
4 Only for use in 50HZ applications.
8"
(203)
Ø3"
(76)
Ø4"
(102)
Ø5"
(127)
1"
(25)
2.5"
(63)
5"
(127)
NOTE: Hydrel Reserves The Right To Modify Specification Without Notice. Any dimension
on this sheet is to be assumed as a reference dimension: “Used for information purposes
only. It does not govern manufacturing or inspection requirements.” (ANSI Y14.5-1973)
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2008-2015 Acuity Brands Lighting, Inc.
09/03/15
PDX4_LED_LINEVOLTAGE
PERFORMANCE DATA
LUMEN OUTPUT
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance
may differ as a result of end-user environment and application. Contact factory for performance data on any configurations not shown here.
Projected LED Lumen Maintenance
Distribution
Nema
Type
Beam Angle (50%)
HxV
Field Angle (10%)
HxV
Watts
LPW
Delivered
Lumens
SP
3x3
13.3 x 13.3
38.4 x 38.4
10
27
276
MFL
3x3
21.9 x 21.9
42.1 x 42.1
10
31
332
SP
3x3
13.3 x 13.3
38.4 x 38.4
10
46
459
MFL
3x3
21.9 x 21.9
42.1 x 42.1
10
52
554
Operating Hours
0
25,000
50,000
100,000
SP
3x3
13.3 x 13.3
38.4 x 38.4
10
46
459
MFL
3x3
21.9 x 21.9
42.1 x 42.1
10
52
554
Lumen Maintenance
Factor
1
0.98
0.97
0.95
3000K
80CRI
4000K
68CRI
5000K
68CRI
Data references the extrapolated performance projections for the Fixture platform in
a 25°C ambient, based on 8400 hours of LED testing (tested per IESNA LM-80-08 and
projected per IESNA TM-21-11).
To calculate LLF, use the lumen maintenance factor that corresponds to the desired number
of operating hours below. For other lumen maintenance values, contact factory.
Electrical Load
OPERATING TEMPERATURE: -30°C Through 40°C
Current (A)
Lumen Ambient Temperature (LAT) Multipliers
Use these factors to determine relative lumen output for average ambient temperatures
from 0-40°C (32-104°F).
Ambient
0°C
10°C
20°C
25°C
30°C
40°C
5° TILT
Drive Current
(mA)
System
Watts
120
208
240
277
347
9 LED
500mA
10
0.083
0.048
0.042
0.036
0.029
Slip Resistance and Load Rating
Lumen Multiplier
32°F
50°F
68°F
77°F
86°F
104°F
Light
Engines
PDX4
1.02
1.01
1.00
1.00
0.99
0.98
MAXIMUM LOAD RATING
Peak compression force of 2,048 lbs.
LENS STATIC COEFFICIENT OF FRICTION
PDX4 Anti-Slip Lens (FLCAS): Dry = 0.78; Wet = 0.30
PDX4 Slip Resistant Lens (FLSR): Dry = 0.68; Wet = 0.59
10°° TILT
15° TILT
5° SPREAD
TKO optic kit includes a 5°, 10° and 15° tilt filters and a 5° axial spread filter.
TKO kits are standard on PDX4 LED fixtures and include a mounting ring.
FEATURES & SPECIFICATIONS
CONSTRUCTION: Door material - die cast bronze or stainless steel. Housing - die cast bronze
and injection molded thermoplastic. The housing is U.V. stabilized, impact and corrosion resistant
for use in all types of environments. Conduit entries - two 1/2” NPT side entries standard, two 1/2”
bottom entries are optional.
ELECTRICAL: Integrally mounted modular LED transformer, prewired for easy installation
and maintenance. Junction box suitable for thru-branch wiring.
SOURCE: LED: Monochromatic LED, 9W
LISTING: IP67, CSA, CSAUS
VOLTAGE: MVOLT (120-277) or 120 for dimming
RATED: IC, non-IC, ground mounted recessed.
LIGHT DISTRIBUTION: SP (Spot) or MFL (Medium Flood)
WARRANTY: 5-year limited warranty. Complete warranty terms located
at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
LENS/SEAL: Tempered clear flat borosilicate glass. The patent pending door / lens seal uses
proprietary knife edge technology to secure the assembly to the housing. Two captive screws
hold the assembly in place. The lens is notched to provide maximum aperture opening.
FINISH: Natural bronze or stainless steel with a brushed finish.
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specifications subject to change without notice.
FIXTURE AIMING: The Paradox™ Series uses optical aiming filters. The TKO kit consists of 4
filters: 5º, 10º and 15º tilt and 5º axial spread.
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2008-2015 Acuity Brands Lighting, Inc.
09/03/15
PDX4_LED_LINEVOLTAGE