Prices in green are FREE SHIPPING (lower 48 states). No oversize or handling fees!
Cool Air Induction Systems
AIRAID's cool air intake system with Modular Venturi
Tube (MVT) mated to a lightweight composite cool
air dam. It generates an additional 17 horsepower
and 21 lb/ft of torque.
‘10 GT.................... M450238 .........$299.90 ea
‘11-13 GT ............... M450264 .........$336.90 ea
See Pages 49 & 50 for more
Cool Air Induction Systems by Airaid!
M450238
EFI Intake Manifolds
Throttle Bodies
Billet
Aluminum
Throttle Bodies
3-Valve Intake Manifold
Short runner
design gains of
11-14 power on
a stock engine &
30-40 on heavily
modified engines.
Easy installation requires no special tools & works
with stock fuel rails or aftermarket. Flows between
325-330 cfm, out-flowing any currently available
cylinder head. Power above 5,000 rpm will peak
higher & maintain to redline.
*Tuning is required with the installation of this intake manifold.
‘05-09 GT, Black .... CL720 ...............$799.95 ea
Intake Manifold
Performance Intake Manifold
Same lightweight
composite as OE. Tested to
5-bar pressure & is great for
forced induction. High-flow
runners & open plenum fits
under the factory hood. Includes
gaskets. NOTE: (3) year manufacturer’s limited warranty.
Contact the Ford Performance Call Center at (800) 367-3788
for details.
‘05-10 GT .............. M9424463V .....$629.95 ea
Intake Manifold
Light weight composite is original
equipment on the Boss 302R
and Boss 302S race cars. Look
and performance equal to none.
Includes unique Ford Racing intake
badging. A computer recalibration
is required after installation.
‘11-13 GT & ‘12-13 Boss 302
.............................. M9424M50BR .$484.95 ea
Installation Kit......... M9444M50B ...$169.95 ea
Boss Manifold Adapter
Allows installation of Ford
Racing Boss
302 intake on GT with Vortech Supercharger.
• Black Anodized Throttle Body Spacer
• Plug-n-Play ETC Extension Wiring Harness
• Quick Connect PCV Coupler with Clamp
• All necessary mounting hardware.
‘11-13 GT w/Vortech Supercharger
.............................. VT36 .................$61.95 ea
Twin Throttle Bodies
• Twin 62mm bore (stock on GT is twin 55mm)
• Fits in the factory location.
• Precision machined from billet aluminum to
ensure consistency.
• Polished finish with machined Ford Racing logo.
• Tested to Ford OE specifications for cold and hot
weather.
• Complete with throttle position sensor and actuator motor.
•Uses OE gear to prevent gear bind & wear.
*This throttle body requires a calibration, do not attempt to use
on stock calibration.
‘05-10 GT
Twin 62mm ............ M99263V .........$559.95 ea
‘07-12 GT500
Twin 65mm ............ M9926CJ65 .....$659.95 ea
90mm
Throttle Body
Polished billet
aluminum with
Ford Racing logo
CNC’ed into the housing. Tapered inlet for high
flow & calibrated for consistent idle using same
procedure as factory units. Tested by FRPP through
hundreds of hours of dyno, racing & street driving.
Includes all factory sensors & jumper harness.
NOTE: Requires computer recalibration & the appropriate FRPP
throttle body spacer, see Related Parts.
‘11-13 GT; ‘12-13 Boss 302
.............................. M9926M5090..$689.95 ea
Twin Throttle Bodies
BBK's Twin units flow approximately 30% to 45%
better than the factory twin
BBK1763
57mm part. Adds up to 12
horsepower over
stock throttle body. Direct bolt-on, with no modifications necessary. Machined from high quality 356
aluminum.
‘05-10 GT
Twin 62mm ............ BBK1763 ..........$319.99 ea
‘07-10 GT500
Twin 65mm ............ BBK1764 ..........$349.99 ea
Fuel
Factory intake with less than
5 miles from the factory to the
tuner. Includes charge motion
plates.
‘05-08 GT.............. F4207 ...............$89.95 ea
M99263V
These improve throttle response,
BBK1765
fuel economy and boosts HP
as much as 7-10 HP! It is CNC machined for close
tolerances and maximum efficiency. Simply bolt on
and go. Custom tuning not required if used alone.
Gaskets are included.
‘05-10 V6
Single 70mm.......... BBK1765 ..........$309.99 ea
‘11-12 GT
Single 85mm.......... BBK1821 ..........$469.95 ea
‘11-12 GT & Boss 302
90mm.................... BBK18210 ........$549.99 ea
‘11-12 V6
73mm Power Plus .. BBK1822 ..........$399.99 ea
5553126
Charge Motion Delete Plates
Eliminates restriction of factory plates.
‘05-08 GT...............5553125 ..........$279.95 pr
‘05-08 GT with predrilled holes for nitrous.
...............................5553126 ..........$319.95 pr
Note: As of the 2009 model year, Ford now molds the charge
motion plates into the stock intake manifold and are no longer
changeable.
Boss Power Pack with
FRPP Boss 302 Intake Manifold,
C&L Cold Air Intake
and SCT SF3 Power Tuner
• Ford Racing composite intake manifold (#M9424M50BR)is
same as used on Boss 302R & Boss 302S race cars.
• C&L CAI (#MAF11) improves engine airflow & can result in
gains up to 15HP.
• SCT SF3 Power Tuner (#SCTSF3)has dyno-proven tune
files & allows user to read stored data & realtime data
& sensor information like EGT & air/fuel ratio. Computer
retune is required after installation of intake & CAI system.
‘11-13 GT & ‘12-13 Boss 302
............................... BPP .............................$1,179.88 kit
See thousands of photos or order on-line 24 hours a day @ www.mustangsunlimited.com
47