Catalog - Elbacomp

PA S S IVE C OM PONE NT S Selection Guide Surface Mount Resistors & Arrays Flat chip resistors and arrays include general purpose, high precision, pulse and surge, high voltage, high heat, anti sulfuration and zero ohm types for applications ranging from general purpose to ultra precision. Thick Film Specialty Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate • Sizes available: 01005 0603 0201 0805 0402 1206 • RuO2 Thick Film 1210 2010 2512 General Purpose - RK73B • Tolerance: ±2% and ±5% • Resistance Range: 1Ω ~ 22MΩ Precision - RK73H • Tolerance: ±0.5% and ±1% • Resistance Range: 1Ω ~ 10MΩ High Precision - RK73G • T.C.R.: ±50 ppm/K • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.5% and ±1% Zero Ohm - RK73Z • Maximum Resistance of 50mΩ • Maximum Continuous Current @70°C: 0.5A ~ 2.0A NEW Anti-Sulfur • Excellent anti-sulfuration characteristics • High heat and weather resistance • Series available: RK73B RT CN_RT SG73 RT RK73H RT CN_KRT RK73Z RT CNZ_RT Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate NEW Pulse SG73P and Surge SG73S • Resistance Range: 1Ω ~ 10MΩ • Tolerance: ±0.5%, ±1%, ±2%, ±5% • Sizes available: 0402, 0603, 0805, 1206, 1210 Voltage Resistor Arrays Thin Film Surge Current - SG73 • 10x pulse power capability • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±10%, ±20% • Sizes available: 0603, 0805,1206, 1210, 2010, 2512 Isolated Resistors Ultra Precision - RN73 • Tolerance: ±0.05% ~ ±1% • T.C.R. Max.: ±5, ±10, ±25, ±50 or ±100 ppm/K • Resistance Range: 10Ω ~ 1MΩ • Nickel chromium thin film resistor element Convex, Square Corners - CN_K • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±1% ~ ±5% • Sizes available: 0201, 0402, 0603 x2, x4, x8 elements Ultra Precision - RN73H • High Temperature range up to +155°C • Higher rated ambient temperature: +85°C • Improved moisture resistance with special coating • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±0.05% ~ ±1% • T.C.R. Max.: ±5, ±10, ±25, ±50 and ±100 ppm/K Solder Plating SG73S SG73P Ni Plating Protective Coating Resistive Inner Electrode Film Ceramic Substrate Wide Terminal - WK73R • Robust Thermal Cycle characteristic • Power Rating: 0.75W ~ 2W • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±1% or ±5% • T.C.R.: ±100 and ± 200 ppm/K • Sizes available: 0612 1020 1218 2512 • RuO2 Thick Film Inner Resistive Electrode Film Solder Plating Ni Plating Protective Coating Ceramic Substrate High Voltage - HV73 • 2.5x to 10x rated working voltage of standard thick film • Chip Size 2512 with 3kV rated voltage • Sizes available: 0603, 0805, 1206, 2010, 2512 350V, 400V, 500V, 2kV, 3kV • Resistance Range: 10kΩ ~ 51MΩ • Tolerance: ±0.5%, ±1%, ±2%, ±5% • Sizes available: 0603, 0805, 1206, 2010, 2512 • Sizes available: 0402, 0603, 0805, 1206, 1210 MELF Carbon Film/Metal Film/Zero Ohm • RD41 Carbon Film Series • RN41 Metal Film Series • CC Zero Ohm Series CERAMIC Ceramic Composition - CPCN • Reliable in pulse transient applications • Power Rating: 0.5W, 1W, 1.5W and 2W • Resistance Range: 1KΩ ~ 15KΩ • Custom ohmic values on request • Tolerance: ±20% Protective Coating Electrode Resistive Film Inner Electrode Ceramic Substrate Concave, Square Corners - CN • Resistance Range: 10Ω ~ 1MΩ • Tolerance: ±1% ~ ±5% • Sizes available: 0402, 0603, 0805, 1206 x2, x4, x8 elements Convex, Scalloped Corners - CN_A • Resistance Range: 1Ω ~ 1MΩ • Tolerance: ±1% and ±5% • Sizes available: 0603, 1206 x2, x4 elements Zero Ohm Jumper - CNZ Convex or Concave • Current Rating @70°C (per element): 0.5A and 1.0A • Sizes available: 0402, 0603, 0805, 1206 x2, x4, x8 elements NEW Anti-Sulfur • Excellent anti-sulfuration characteristics • High heat and weather resistance • Series available: CN_RT CN_KRT CNZ_RT Bussed Resistors Convex or Concave - CND • Reverse common electrode and side electrode type circuits available • Resistance Range: 22Ω ~ 100KΩ • Tolerance: ±5% • Sizes available: 1206, 1608 and 2512 Convex Staggered Terminations - CNB • Resistance Range: 1KΩ ~ 470KΩ • Tolerance: ±5% • 4 or 8 elements included in one array in 2 sizes BGA (ball grid array) - BR • High level of integration • Low inductance • 18 integrated resistors • Isolated or bussed Current Sense Resistors Four basic types of current sensing resistors are available in lowohm, high precision, 4-terminal Kelvin, high power, low profile, high frequency, high heat, and power shunt chips for a wide range of detecting applications and power applications. Thick Film Low-ohm - SR73 Series • Resistance Range: 24mΩ ~ 10Ω • Tolerance: ±0.5% ~ ±5% • Sizes available: 0201 ~ 2512 • Best T.C.R.: ±100 ppm/K Solder Plating Ni Plating Protective Coating Resistive Inner Film Electrode Ceramic Substrate Ultra-low Ohm - UR73(D) Series • Face-up and Face-down types available • Resistance Range: 10mΩ ~ 100mΩ • Tolerance: ±1% • Improved T.C.R.: ±100 ~ ±300 ppm/K • Sizes available: 0402 ~ 2512 Resistive Film Ceramic Protective Substrate Coating Inner Electrode Solder Plating Ni Plating Wide terminal - WK73S • Robust Thermal Cycle characteristic • Power Rating: 0.75W ~ 2W • Resistance Range: 10mΩ ~ 9.1Ω • Tolerance: ±1% or ±5% • T.C.R.: ±100, ±200, ±300 or ±800ppm/K • Sizes available: 0612, 1020, 1218 and 1225 Inner Resistive Electrode Film Protective Coating Ceramic Substrate Solder Plating Ni Plating Molded Metal Plate Robust Lead - Frame SL(N)/TSL Series • Molded with flame retardant resin (UL94 V-0) • Non-wirewound, excellent for high frequency • Enhanced thermal shock capability • Operating Temperature: up to +180°C • Power Rating: 0.75W ~ 3W • Resistance Range: 3mΩ ~ 22MΩ • Tolerance: ±0.5%, ±1%, ±2%, ±5% • T.C.R.: ±75 ~ ±200 ppm/K TLR Series • Resistance Range: 1mΩ ~ 20mΩ • Tolerance: ±1%, ±2% or 5% • Ultra Low T.C.R.: ±50, ±75 ppm/K • 0402, 0805, 1206, 2010, 2512 chip size • Ultra Low Height: 0.25 ~ 0.6mm Electrode Molded Resistive Resin Element Four-terminal - CSR Series • Suitable for Kelvin applications • Power Rating: 1W & 2W • Resistance Range: 5mΩ ~ 50mΩ • Tolerance: ±0.5% & ±1% • T.C.R.: ±50 ppm/K Voltage Electrode Molded Resistive Resin Element Protective Coating TLR H Series • Resistance Range: 10mΩ - 250mΩ Resistive Element • Tolerance: ±1% Termination Solder • Ultra Low TCR: ±50, ±75 ppm/K Protective • Ultra Low Height: 0.25, 0.5 mm Coating • 0805, 2010, 2512 chip size • Power Rating 0.25W, 1W, 2W Bottom protective coating Metal plate carrier Insulation Resistive element Solder Plating Inner electrode LR72A Copper Nickel Alloy Copper Nickel Copper Nickel Alloy Termination Alloy LR72A Termination 3.75Termination size only LR72A LR72A 3.75 size only 3.75 size only Ceramic Case - BLR Series • Flame retardant ceramic case • Resistance Range: 8mΩ ~ 50mΩ • Tolerance: ±5%, ±10% • Power Rating: 1W, 2W or 15W LR72B Copper Nickel Alloy Copper Nickel Copper Alloy Nickel Alloy Termination Resistor Element Termination Termination Cement LR72C Ceramic Case Protective Coating Solder LR72 Series • Power Rating: 1/4W, 1/2W & 1W • Resistance Range: 2mΩ ~ 10mΩ • Tolerance: ±5% • T.C.R.: ±100, ±350 ppm/K • Custom configurations available Ceramic High power - PSB Series • Power Rating: 6W • Resistance Range: 0.75mΩ & 1mΩ • Tolerance: ±1% • T.C.R.: ±75 ppm/K • Special electrode shape ensures excellent temperature cycling characteristics Resistive Element Termination Top protective coating Current Electrode Power Shunt Copper Nickel Alloy Copper Nickel Copper Alloy Nickel Alloy Termination Termination Termination Solder Resistive Element Electrode High power - PSI Series • Power Rating: 3W, 5W • Resistance Range: 1mΩ ~ 4mΩ • Tolerance: ±1% • T.C.R.: ±50 & ±75 ppm/K • Smooth current flow, suitable for large current detection High power - PSE Series • Power Rating: 3W, 5W • Resistance Range: 0.5mΩ ~ 2mΩ • Tolerance: ±5% • T.C.R.: ±150 ppm/K • Smooth current flow, suitable for large current detection Electrode Solder Resistive Element Thermal Sensors and Circuit Protection In addition to our flat chip resistors we offer a complete line of circuit protection products including thermistors, platinum sensors, chip and ceramic case fuses and metal oxide varistors. Thermal Sensors Thin Film Linear Positive - LT73(V)/LP73 • LT73 available in 25 specifiable temperature characteristics • LT73V: 0805 & 1206 for Automotive • Resistance Range: 51Ω ~ 51KΩ • Tolerance: ±1% ~ ±5% • T.C.R.: ±150 ~ ±5000 ppm/K • T.C.R. Tolerance: ±150 ppm/K ~ ±5% • Sizes available: 0603, 0805 & 1206 Resistance Changing Rate (%) Positive Temperature Characteristics Chip Type Sensor - SDT73H / SDT73V • T.C.R in accordance with DIN EN/IEC 60751 • V Series = AEC-Q200 tested • Resistance Range: 100Ω & 500Ω • Tolerance: ±0.2% or 1% • T.C.R.: ±3850ppm/K ±50ppm/K 4500ppm/�C 40 Varistors Fusing Flat Chip Resistors - RF73 • Resistance Range: 0.2Ω ~ 510Ω • Tolerance: ±5% • Sizes available: 0603 ~ 2512 Chip Current Fuses - TF • Rated Current: 0.2A ~ 5A • Rated Voltage: 24V & 32V • Sizes available: 0402 & 0603 U.D. TF16VN: 0603 for Automotive Metal Oxide Chip - NV73 • Protects against static electricity, switching and incoming surges • Varistor Voltage: 8Vc ~ 165Vc • Sizes available: 0201 ~ 2220 • Maximum Energy: 0.005J ~ 12.0J 2400ppm/�C 20 0 Protective Coating -10 -25 0 25 50 75 100 125 PTC Thermistor - PT72 • Three Curie Temperatures: 70°C, 80°C & 100°C • Resistance Range: 50Ω, 120Ω, 470Ω & 1kΩ • Sizes available: 0603 & 0805 CT 100�C 10 1 20 40 60 80 100 120 140 10,000,000 1,000,000 100k 10k 3800k 1k 3800k 100 10 -50 3200k -25 0 25 50 75 Temperature (°C) Ni Plating 100 125 Ceramic Substrate Lead Wire Welding Point Custom Configurations ST Series/AFS Units • Customer configurations based on use of SDT101 and SDT310 products Applications for Temperature Compensation • Flow sensor (automobiles, industrial equipment, home appliances) • Measuring equipment (electric scale, load cell, flow sensors, automotives) • Cold junction compensation of thermocouple temperature controllers Buffer Fuse Element Chip Fuse - CCF1N • Square ceramic body • Size: 6.0 x 2.5 x 2.5 mm • Up to AC125V and DC160V • UL248.14, c-UL(CSA)C22.2 • Rated Current: 0.4A ~ 15A NEW Chip Fuse - CCF1F • Fast blow • Meets IEC60127-4 specifications • Universal modular fuse-Links Standard sheet 2 Thermal Fuse & Power Resistor - WF • Rated Current: 2A & 10A • Rated Voltage: 250V • Resistance Range: 1Ω ~ 10KΩ WF TPRD Ceramic Case Cement Resistor Thermal Fuse Resistor Cover Base Lead Wire Inner Side Electrode Varistor Element Molded Resin Electrode Lead Cap Wire Protective Coating Platinum Thin Film Negative Temperature Characteristics 1,000 Trimming Line Lead Weld Reinforcing Coating 160 NTC Thermistor- NT73 • Resistance Range: 1kΩ ~ 150 kΩ • Tolerance: ±5% ~ ±15% • B Constant Tolerance: ±3% ~ ±10% • Sizes available: 0603, 0805, 1206 10,000 Micro-Fuse - CCP • UL 248.14 approved, File #131375 • Fusing Current: 1A ~ 10A • Rated Voltage: 24V ~ 76V • Sizes available: 1206 & 1210 NEW Chip Varistor for Load Dump Surge – NV73DS • Meets load dump surge test of JASO • High energy power - comparable to power Zener diodes • Size: 6.1 x 5.1 x 3.0mm • Varistor Voltage: 20~25V; 40~45V Sn Plating Radial Type - SDT310 • T.C.R. in accordance with JIS/DIN Standards • High resistance in small package • Resistance Range: 100Ω, 500Ω, 1KΩ • Tolerance of Measuring Temp: Down to ±(0.15+0.002|t|)°C • Temperature Range: -55°C ~ +650°C Temperature (°C) 100,000 Inner Fuse Element Electrode Ceramic Substrate Platinum Ceramic Thin Film Core Insulation Coating 100 0 Axial Type - SDT101A/SDT101B • -55 to +300°C Operating temperature • Resistance Range: 10Ω, 100Ω, 500Ω • Tolerance: ±0.5% or ±1% • T.C.R.: ±3500 ppm/K ±1% or ±2% Marking (A only) CT CT 70�C 80�C 0.1 -20 Protective Coating Automotive Metal Oxide Chip - NV73DL • Conforming to AEC-Q200 • Low leakage current • Operating Temperature: up to +125°C • Varistors Voltage: 10 ~ 90 V1mA • Sizes available: 0603, 0805 & 1206 Electrode Temperature Characteristics 1000 Platinum Inner Thin Film Electrode Ceramic Substrate -20 -30 -50 Ni Plating Ni Plating 1600ppm/�C 10 Solder Plating Solder Plating 3300ppm/�C 30 Thick Film Linear Positive - LA73 • Available in 13 specifiable temperature characteristics • T.C.R. Tolerance: ±200 ppm/K or ±10% • Resistance Range: 22Ω ~ 10KΩ, ±5% • Sizes available: 0603, 0805 & 1206 Resistance (Ω) Fuses 60 50 Ambient Temperature (°C) Resistance (kΩ) Platinum Thermal Sensors Terminal wire ød NEW Temperature Protection Resistor – TPR • Quickly fusing to overcurrent • Circuit is completely interrupted after fusing • Lightning surge test (IEC61000-4-5) effective • UL1412 (File E344400) approval awarded • Power Rating: 1Watt • Resistance Range: 2Ω ~ 10kΩ Inner Electrode Metal Oxide Disc Type - NVD • Higher surge current • Absorbs positive and negative surges • Varistor Voltage: 16V~1980V • Disc diameters of 05, 07, 10, 14 & 20 • Maximum Energy: 0.3J ~ 360J 1 2 3 4 1 2 3 4 Insulation coating Electrodes Varistor element Lead wire Inductors Coil solutions on different cores cover an application range from RF to power by using ferrite, ceramic, thin film and choke coil technologies. Choke Coils Wirewound Transponder Coil • Single-axis LF antenna (forNEW receiving) • Extremely low leakage magneticCOILS flux TRANSPONDER • High Q and High Sensitivity • High rated current in 10 x 10mm size 1210 Molded Ferrite Core - KL32/LFC32 • Wide range of applications • Molded Resin • Flat-top design • High Q with wirewound structure • Inductance Range: .005µH to 330µH • Tolerance: ±5% ~ ±20% Power - LPC • Sizes with bottom terminations: 4045, 9040, 10065, 12065 • DC Current Max.: 0.12A ~ 10A • Inductance Range: 0.68µH ~ 6.8mH • Tolerance: ±10% ~ ±30% Rx-Receiver – KT 11835 NEW Magnetic Shielded Power – LCM1060 TRANSPONDER COILS トランスポンダーコイル（受信） KT11835 TRANSPONDER COILS OKE COILS KT11835 KT11835 Molded Resin Ferrite Electrode Core インダクタ Inductor Ceramic Magnet Substrate Wire Ceramic Magnet Substrate Wire Ferrite Core Shielded - LKS EU EU NEW LPC 4235, 4545 RoHS • Sizes 0745, 1045, 1260 NEW RoHS High Q Air Core - KQ/KQT B B EU • 4 mm size with bottom and side • DC Current • High self resonant frequency EU Max.: 0.4A ~ 6.6A RoHS terminations パワーチップインダクタ磁気シールドタイプ D D Range: 3.3µH ~ 470µH RoHS • Inductance • Ideal for low loss, high output 45°±6° 45°±6° Power Chip Inductors Shielded Type パワーチップインダクタ • Tested acc. to AEC-Q200 requirements C C A A • Tolerance: ±20% or ±30% power consumption Power Chip Inductors パワーチップインダクタ • DC Current Max: 0.1A ~ 3.66A • Q Factor Min.: 16 ~ 60 パワーチップインダクタ Power Chip Inductors • Inductance Range: 0.82µHF ~ 2200µH F • Inductance Range: 1.0nH ~ 10µH Power Chip Inductors 電極を製品長辺へ配置した樹脂モールド外装のト • Tolerance: ± 10% or ±20% 電極を製品長辺へ配置した樹脂モールド外装のト Ferrite ■構造図 Construction Magnet Ceramic Ferrite Electrode Magnet Ceramic ランスポンダーコイル。 Electrode • Tolerance: ±0.1nH ~ ±20% 電極を製品長辺へ配置した樹脂モールド外装のトランスポンダーコイル。電極やランドパターンがコイル磁束を妨げないた Core Wire Substrate Core Wire Substrate 3 ● 電極やランドパターンがコイル磁束を妨げないたランスポンダーコイル。 • Sizes available: 0402, 0603, 0805 & 1008 ■構造図 Construction め、Q値・感度が高い。 A LPC4235L 電極やランドパターンがコイル磁束を妨げないた 1 め、Q値・感度が高い。 3 J4D 4端子電極と樹脂モールド外装により、耐振動、 CHOKE COILS インダクタ Inductor R 1 ーチョークコイル ② ④ ■外形寸法 EU RoHS 3.0Max. 1.0Typ. 1.0Typ. Products meets （ EU-RoHS requirements. Dimensions mm） ● Marking:KT 品種 Pin. 1 Side Product 0745 M：±20% T：Sn TEG：Plastic 3 digits ・イモビライザーシステム ■用途 Applications 1045 N：±30% embossed フェライトコア Ferite Base ①① フェライトコア Ferite core core ③③ 台座台座 ■用途 Base1260Applications ・RF-ID BK：Bulk ● 各種電子機器のDC－DCコンバータ ② マグネッマグネットワイヤ Magnet wire ④④ Applications 電極 Electrode ■用途フェライトコア core 台座 ● Receiving LF anttena coil0906 for shown below. ● Electrode ● DC-DC 0603・0604・0805・1006 ②① トワイヤ Magnet wire ③ 電極 Base converter for variousFerite electric equipments. 下記用途の受信用LFアンテナコイル環境負荷物質含有についてEU-RoHS以外の物質に対するご要求がある場合にはお問合せ下さい。 ② マグネットワイヤ Magnet ● wire ④ 電極 Electrode ・Tire Pressure monitoring system 下記用途の受信用LFアンテナコイルテーピングの詳細については巻末のAPPENDIX Cを参照して下さい。・タイヤ空気圧監視システム Contact us when you have control request for environmental hazardous material other than the substance specified 10.5MAX. ・Smart key system ・タイヤ空気圧監視システム by EU-RoHS. ・スマートキーシステム MARKING Power - SDR ・Immobilizer For further information on taping, please refer to APPENDIXsystem C on the back pages. ■外形寸法 Dimensions ・イモビライザーシステム・スマートキーシステム ■外形寸法 Dimensions ・RF-ID DOT ■定格 Ratings • Sizes 0603, 0604, 0805, 1006, 0906 ■外形寸法 Dimensions ・RF-ID ・イモビライザーシステム外形寸法 Dimensions（mm） KT Code 11835 4 形状 Style L×W×H (mm) 11.8×3.6×3.0 KT 11835 11835 Magnet T wire 品種形 T TEG 101 端子表面材質状 Terminal Surface Material A T：Sn T B 二次加工 Taping 5 722 公称インダクタンス値 Nominal Inductance Resin TEG：Plastic embossed BK：Bulk TEG TEG 端子表面材質 Electrode 722 二次加工 3 digits 722 許 To G： H： J： J 公称インダクタンス値 Performance 項目 SRF （MHz） Typ. 形名 Type 0.022 4.5 41 LKS1045 TTEG 3R3N 3.3 0.031 3.8 34 LKS1045 TTEG 4R7N 4.7 0.035 3.6 31 LKS1045 TTEG 5R6N 5.6 3.3 LKS0745 TTEG 4R7N 4.7 LKS0745 TTEG 5R6N 5.6 LKS0745 TTEG 6R8N 6.8 0.038 3.4 28 LKS1045 TTEG 6R8N LKS0745 TTEG 8R2N 8.2 0.050 2.8 25 LKS1045 TTEG 8R2N N：±30％ 5.8 37 0.022 5.1 31 0.024 4.9 28 6.8 0.027 4.6 25 8.2 0.032 4.0 23 0.042 3.6 21 0.043 3.4 N：±30％ 0.057 2.6 24 LKS1045 TTEG 100M 10 12 0.067 2.4 22 LKS1045 TTEG 120M 12 LKS0745 TTEG 150M 15 0.100 2.1 19 LKS1045 TTEG 150M 15 LKS0745 TTEG 180M 18 0.113 2.0 17 LKS1045 TTEG 180M 18 LKS0745 TTEG 220M 22 0.127 1.9 16 LKS1045 TTEG 220M 22 0.089 LKS0745 TTEG 330M 33 0.199 1.5 13 LKS1045 TTEG 330M 33 0.159 LKS0745 TTEG 470M 47 0.253 1.3 11 LKS1045 TTEG 470M 47 0.196 LKS0745 TTEG 560M 56 0.288 1.3 10 1.5 LKS1045 TTEG車載機器、医療機器、航空機器など人命に関わったり、あるいは甚大な損害を引き起こす可能性のある機器へのご使用を検討される場合には、必ず事前にご相談下さい。 560M 56 0.215 8 LKS0745 TTEG 680M 68 0.437 1.0 9 LPC4545 LKS0745 TTEG 820M C：Sn/Cu 82 M：±20％ 0.065 0.066 SDR0805 Y：±15% Bulk ● 端子鉛フリー品は、欧州RoHS対応品です。 endurance ±５％ ±1.6％ M：±20% 法Moisture Dimensions ● Products with lead free termination meet EU-RoHS requirements. SDR1006 E E E 10 LKS0745 TTEG 120M LPC4545 LKS0745 TTEG 101M（4545） 100 Magnetic Wire 120 公称インダクタンス許容差 LKS0745 TTEG 121M（4545） TTEG 151M 150 ToleranceLKS0745 Nominal LKS0745 TTEG 181M 180 Inductance LKS0745 TTEG 221M 220 規格値 Performance Requiremaents Recommended Pad Dimensions Thin Film LKS0745 TTEG 100M 3.0 2.9 2.5 19 17 15 14 1.9 11 1.7 9 本カタログに掲載の仕様は予告なく変更する場合があります。ご注文およびご使用前に納入仕様書で内容をご確認下さい。 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 1.4 LKS1045 TTEG 680M 68 0.242 8 M：±20％ Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment. orInductance failure of the products in such applications 1.3 may cause loss LKS1045 M：±20% TTEGMalfunction 820M 82 0.265 7 of human life or serious damage. Inductance Factor Frequency Frequency Resistance E （4235）0.483 Type 1.0 8 DC Current www.koane 4 TTEGM：±20% （mV/uT H：±3%1.2 125 （4235）（4545） TE：Plastic embossed 0.598 0.9 7 LKS1045 100 0.414 6 （mH） Tolerance Min. （kHz）（kHz）Min. （Ω）（mA） L2101M KT11835TTEG123□ 12 45 500 Max. 119 Max. 12 J ：±5%1.0 BK：Bulk TE：Plastic （4545）embossed 0.644 0.8 6 LKS1045 TTEG 121M 120 0.472 6 Marking G：±2% KT11835TTEG722□ 7.2 750 92 15 55 0.9 （4545） BK：Bulk 0.817 0.7 6 LKS1045 TTEG 151M 150 0.57540 5 Protective • Polarity 形名中□にはインダクタンス値の許容差記号（G、H、J）が入ります。 125 The code for inductance tolerance (G, H, J) enters □. 0.8 Coating 0.7 5 LKS1045 TTEG 181M 180 H：±3% 0.633 4 BK：Bulk 0.897 Any45 other0.7 inductance under 12mH is available. KT11835TTEG123□12mH以下のインダクタンス値に対応します。 12 500 119 12 75 J ：±5% A C F（Typ.） Weight（g/1,000pcs） SDR0603 5.6±0.2 3.7±0.3 1.8 420 3.0 1 Inner 試験方法 SDR0604 5.6±0.2 4.5±0.3 1.8 525 Electrode 形名中□にはインダクタンス値の許容差記号（G、 H、 J）が入ります。 The code for inductance tolerance (G, H, J) enters □. Test Methods 試験方法本カタログに掲載の仕様は予告なく変更する場合があります。ご注文およびご使用前に納入仕様書で内容をご確認下さい。 3.0 SDR0805 7.5±0.3 5.0±0.3 2.6 1155 12mH以下のインダクタンス値に対応します。 AnyE=2.5±0.3 other inductance under 12mH is available. 車載機器、医療機器、航空機器など人命に関わったり、あるいは甚大な損害を引き起こす可能性のある機器へのご使用を検討される場合には、必ず事前にご相談下さい。 Test Methods 試験方法 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. Electrode Coil Contact our sales representatives before you use our products for applications including automotives, medical equipmentCeramic and aerospace equipment. −40℃(30min)/＋125℃(30min), 100cycles SDR1006 9.5±0.3 5.5±0.3 2.9 1837 Test Methods Substrate www.k Malfunction or failure of the products in such applications may cause loss of human life or serious damage. Pattern −40℃(30min)/＋125℃(30min), 100cycles 本カタログに掲載の仕様は予告なく変更する場合があります。ご注文およびご使用前に納入仕様書で内容をご確認下さい。上図を参照してください。Please refer to the above figure SDR0906 1750 Insulation Direction −40℃, 1000h 車載機器、医療機器、航空機器など人命に関わったり、あるいは甚大な損害を引き起こす可能性のある機器へのご使用を検討される場合には、必ず事前にご相談下さい。 Film you orderMark www.koanet.co.jp A Specifications C F（Typ.） Weight （g/1,000pcs） −40℃(30min)/＋125℃(30min), 100cycles given herein may be changed at any time without prior notice. Please confirm technical specifications before and/or use. −40℃, 1000h sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment. 125℃, Contact 1000hour or www.koanet.co Malfunction failure of the products in such applications may cause 5.6±0.2 3.7±0.3 1.8 420loss of human life or serious damage. −40℃,1000h 1000h 125℃, 4 1 40℃±2℃, 90%～95%RH, 1000h 5.6±0.2 4.5±0.3 1.8 1 4 525 125℃, 1000h 40℃±2℃, 90%～95%RH, 1000h 7.5±0.3 5.0±0.3 2.6 1155 40℃±2℃, 90%～95%RH, 1000h 9.5±0.3 5.5±0.3 SDR0906 2.9 1837 1.104 0.6 5 LKS1045 TTEG 221M 220 0.874 LKS0745 TTEG 331M 330 2.093 0.5 4 LKS1045 TTEG 331M 330 1.300 ⊿L/L Performance Requiremaents T：Sn TEB：Tape embossed 13” 規格値 3 digits K：±10% LKS0745 TTEG 471M 470 2.576 0.4 3 LKS1045 TTEG 471M 470 1.716 Items 項目 ⊿L/L 規格値 Performance Requiremaents 保証値 Limit 代表値 Typical Y：±15% BK：Bulk Electrode Items ⊿L/L 保証値 Limit 代表値 Typical M：±20% TEB Rapid change of 1R5 M 急変 temperature ±５％ ±1.3％本カタログに掲載の仕様は予告なく変更する場合があります。ご注文およびご使用前に納入仕様書で内容をご確認下さい。代表値 Typical 車載機器、医療機器、航空機器など人命に関わったり、あるいは甚大な損害を引き起こす可能性のある機器へのご使用を検討される場合には、必ず事前にご相談下さい。急変 Rapid change of temperature 保証値 ±５％Limit ±1.3％ Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 端子表面材質は鉛フリーめっき品が標準となります。放置 Low temperture exposure ±５％ ±1.3％ Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment. 二次加工公称インダクタンス許容差 Malfunction or failure of the products in such applications may cause loss of human life or serious damage. Rapid change of temperature ±５％ ±1.3％環境負荷物質含有についてEU-RoHS以外の物質に対するご要求がある場合には放置 Low temperture exposure ±５％ ±1.3％ Taping Nominal 放置 High temperture exposure Tolerance ±５％ ±1.3％お問合せ下さい。 SDR0603 Low exposure ±1.3％ Inductance 放置 High temperture exposurelead±５％ ±５％ ±1.3％ The temperture terminal surface material free is standard. 性 Moisture endurance ±５％ ±1.6％ SDR0604 Contact us when you have control request for environmental hazardous material ape embossed 13” substance 3 digits K：±10% High exposure ±1.3％性 Moisture ±５％ ±1.6％ othertemperture than the endurance specified ±５％ by EU-RoHS. 奨ランド寸法 SRF （MHz） Typ. 0.017 0.7±0.1 6.3MAX. LKS0745 TTEG 3R3N 許容直流電流 Allowable DC Current （A）Max.※1 6.3MAX. 直流抵抗インダクタンス公称インダクタンス許容差 DC Nominal Inductance Resistance Inductance（μH） Tolerance （Ω）Max. インダクタ Inductor ons. 端子表面材質二次加工能 Terminal Performance Taping 能 Performance Surface Material nation ● 許容直流電流 Allowable DC Current （A）Max.※1 E E E COIL 形名 Type 直流抵抗インダクタンス公称インダクタンス許容差 DC Nominal Inductance Resistance Inductance（μH） Tolerance （Ω）Max. 0.7±0.1 形形Type 名名 Type Type インダクタ Inductor 名（g） LKS1045Weight Dimensions（mm） Product Style Taping Terminal Nominal Weight （g）coil for shown A Receiving LF anttena below. • DCLKS0745 Current Max.: 外形寸法 0.2A ~ 3A ・RF-ID 外形寸法 Dimensions（mm）（1000pcs） Weight （g） L W H Max. A B 許容差 ■定格 Ratings 品種 W 形状端子表面材質 Surface二次加工公称インダクタンス値Inductance Code Material ■外形寸法（ mm）（1000pcs） LL Dimensions W Max. B coil（1000pcs） Pressure system Toleran ● Receiving Style Taping Terminal Nominal W 1.5µH ~1200µH HH3.5 Max. A A LF anttena B ・Tire for shownmonitoring below. • Inductance Range: LPC4235 4.5±0.2 4.2±0.2 1±0.2 2±0.2 165 使用温度範囲 Operating temperatureProduct range：−40℃〜＋125℃ L×W×H (mm) T：Sn TEG：Plastic Common Mode SLF Code Surface Material Inductance 3 digits ・Smart key system C LPC4235 4.5±0.2 4.2±0.2 3.5 1±0.2 2±0.2 165 embossed 包装数/リール ty/Reel：2,500pcs ・Tire monitoring system 1 Q’ LPC4235 4.5±0.2 4.2±0.2 1±0.2 2±0.2 165 L1 Pressure LPC4545 4.1±0.3±10% 4.6±0.4 4.6 3.2±0.3 230 4 L×W×H (mm) 11.8×3.6×3.0 11.0±0.5 C • Tolerance: ~ ±20% 3.5 G：±2 0603・0604・0805・1006 0906 ・Immobilizer system T：Sn TEG：Plastic BK：Bulk 3 digits •−−Size available: 0905 公称インダクタンス・Smart key system LPC4545 4.1±0.3 4.6±0.4 4.6 3.2±0.3 − LPC4545 4.1±0.3 4.6±0.4 4.6 3.2±0.3 230230 インダクタンス無負荷Q L, Q 測定周波数自己共振周波数直流抵抗許容直流電流H：±3 11.8×3.6×3.0 embossed 13.5MAX. 感 4・RF-ID10.5MAX. 1 形名 Nominal 許容差 Unload Quality L, Q Measuring SelfBK： Resonant DC Allowable J ：±5 B D Bulk D ・Immobilizer system Sens F P 600mAInductance • DC Current Max.: ~ 1600mA Type Inductance Factor Frequency Frequency Resistance DC Current MARKING NEW ■品名構成 Type Designation • ・RF-ID （mV （mH） Tolerance Min. （kHz）（kHz） Min. （Ω）Max. （mA）Max. F • Inductance Range:2 10µH4 ~ 2000µH G：±2% 3 ■品名構成 Type Designation Designation DOT • ■品名構成 Type ■定格 Ratings - KL73 例 Examples KT11835TTEG722□ 7.2 40 Thin Film Inductor 750 92 15 5 2 3 H：±3% 125 Examples F'500frequency119 例例 Examples Tolerance: ±50% ortemperature ±30%12 range：−40℃〜＋125℃ LPC4235 T TM K Operating 221 •使用温度範囲 KT11835TTEG123□ 45 • High self resonant 12 7 J ：±5% A ■定格 L2Ratings 包装数/リール W LPC4235 T TM K Q’ ty/Reel：2,500pcs 221 LPC4235 T TM K 221 形名中□にはインダクタンス値の許容差記号（G、H、J）が入ります。 The• code for inductance toleranceMax: (G, H, J)0.10Ω enters □. ~ 5.00Ω DC Resistance 端子表面材質公称インダクタンス品種二次加工許容差途 Applications 使用温度範囲 Operating temperature range：−40℃〜＋125℃ actuator, etc. 12mH以下のインダクタンス値に対応します。 inductance under L, is available. Type Designation L1 Termination Nominal 1 Product Taping Tolerance 公称インダクタンスインダクタンス Q測定周波数自己共振周波数許容直流電流 1 EAny other 無負荷Q 4•12mH 端子表面材質公称インダクタンス品種二次加工許容差途 Applications Inductance Range: 0.56nH直流抵抗 ~DC100nH 11.0±0.5 • Polarity 端子表面材質公称インダクタンス品 Code 種二次加工許容差 Nominal 包装数/リール Q’ ty/Reel：2,500pcs Applications Surface Material Inductance 形名許容差 Unload Quality L, Q Measuring Self Resonant Allowable E 種DC-DCコンバータ用インダクタに好適。 Termination Nominal Product Taping Tolerance • Inductance range: approx. 10µH ~ 1mH 4 1 Termination Nominal Product Taping ToleranceInductance B W Type Factor Frequency Frequency Resistance DC Current 13.5MAX. Construction PInductance Surface Inductance • Tolerance: ±0.1nH ~ ± 5% Code 種DC-DCコンバータ用インダクタに好適。 E=2.5±0.3 3.0 • T：Sn （Material 4235） 3 digits公称インダクタンス LPC4235 K：±10% TM ： Plastic embossed al for a variety of DC-DC converter inductor インダクタンス無負荷Q L, Q 測定周波数自己共振周波数直流抵抗許容直流電流 Surface Material Inductance Code DCコンバータ用インダクタに好適。（mH） Tolerance Min. （kHz）（kHz）Min. （Ω）Max. （mA）Max. E 感度 • Tolerance: approx. +-5% C：Sn/Cu LPC4545 M：±20% （4235） T：Sn （4235） 2 Quality L, Q Measuring LPC4235 K：±10% TM：Plastic embossed 3• Sizes al for aTvariety of DC-DC converter inductor 形名 3 digits 許容差 Unload Self Resonant DC ~ 1206 Allowable •Nominal available: 0402 plications. 1R5 M T：Sn （ 4235） 3 digits Sensitivit LPC4235 K：±10% 3 7.2 TM ：Plasticembossed embossed （4545） G：±2% TE：Plastic a variety of DC-DCTEB converter inductor 2 C：Sn/Cu KT11835TTEG722□ 40 750 92 15 plications. 形 3.0Max. 3.0Max. EU RoHS 1.0Typ. WW W パワーチョークコイル R COILS 自の構造、巻線技術により、低直流抵抗、高許容流を実現しました。現しました。流を実現しました。実装タイプで、自動搭載に対応します。イプで、自動搭載に対応します。実装タイプで、自動搭載に対応します。んだ付け性、耐環境性に優れています。け性、耐環境性に優れています。んだ付け性、耐環境性に優れています。 Choke Coils フローはんだ付けに対応します。はんだ付けに対応します。フローはんだ付けに対応します。州RoHS対応品です。 S対応品です。州RoHS対応品です。 w DC resistance and high allowable current resistance and highhigh allowable current DC resistance allowable ew realized by the and original construction and NEW Custom Wirewound Coil –current LWA ized by the construction andand ering realized by original the original construction technology. • Custom product which keeps its shape chnology. ing technology. tomatic surface mounting is applicable. even if no core nor bobbinEU are used c surface mounting is applicable. tomatic surface mounting is applicable. cellent solderability and endurance environment. RoHS • Different shapes, dimensions, solderability and endurance environment. tcellent solderability and endurance environment. itable for reflow soldering. inductances onrequirements. request itable for reflow soldering. for reflow soldering. oducts meet EU-RoHS oducts requirements. • meet CoilsEU-RoHS for wire-less power supply, meet EU-RoHS requirements. Electrode ● 100 Magnetic Inner Wire Coating High Current Air Core - KQC • Low DC resistance, high allowable DC current • Nominal 1.4nH ~ 27nH PowerInductance: Choke Coils • Tolerance: ±0.1nH ~ ±5% 長 Features Features Magnetic • Sizes available: 0402, 0603高許容長 Features 自の構造、巻線技術により、低直流抵抗、高許容 Wire 造、巻線技術により、低直流抵抗、 ● ③ ③ ① ED 100 KE COILS ① ① H Aめ、Q値・感度が高い。 ② ④ 耐衝撃、耐基板曲げ性能に優れる。 ● 4端子電極と樹脂モールド外装により、耐振動、 3 E H B ●A ② ● 環境温度変化に対するL値変化が小さい。 4端子電極と樹脂モールド外装により、耐振動、 Land pattern 耐衝撃、耐基板曲げ性能に優れる。 ■外形寸法 Dimensions（mm） ● リフローはんだ付けに対応します。耐衝撃、耐基板曲げ性能に優れる。 F F ● 環境温度変化に対するL値変化が小さい。 B● ● 欧州RoHS対応品です。 11.8±0.2 Ferrite Core Electrode Ceramic/ 環境温度変化に対するL値変化が小さい。 ■外形寸法 Dimensions（mm） core ● リフローはんだ付けに対応します。 ●Ferite B ① フェライトコア Ferrite Transponder coil that is arranged it’ s electrode ■外形寸法 Dimensions（mm） ● リフローはんだ付けに対応します。 ② 電極 Electrode Core C C of the part, and is covered with NEW Z-Axis LF Antenna Coil – KTZ1030 B in the long side ● 欧州RoHS対応品です。 11.8±0.2 ● 欧州RoHS対応品です。 11.8±0.2 molding resin. Electrode ● Transponder coil that is arranged it’ ■特長 Features • High Q and high sensitivity ● Transponder ● Excellent coil thatshigh iselectrode arranged s electrodebecause Q and highit’ sensitivity, ● 漏洩磁束が少ない閉磁タイプのパワーチップイン寸法 Dimensions (mm) 3.4Typ. 1.5Typ. 名 the part, and in the long side形 ofin is the covered neither electrode noristhe land pattern the long side of the part, with and covered withdisturb •1.5Typ. Strong fixation with PC board by Shielded Type 3.6±0.2 A- SDS B C Max. D±0.3 E±0.2 ダクタ。 flux. molding resin. molding7.5±0.5 resin.the4 coil L ● 小型、薄型。 LKS0745 7.5±0.5 4.5 1.0 2.0 4Strong 4 metal terminal electrodes ● A • Sizes available: 0804 ~ 1208 to vibration, shock and substrate bend test by LPC4545 ● Excellent high ● QExcellent and 10.1±0.3 highhigh sensitivity, because Q and high sensitivity, A ● 直流抵抗値が小さく、定格電流が大きい。 LKS1045 10.1±0.3 2.0because3.0 4 4 electrode terminals4.5 structure and the1.5Typ. molded resin. 1.5Typ. 3.4Typ. 1.5Typ. 3.4Typ. 1.5Typ. • Low ②height of 3mm ④ the nor the land pattern ● リフローはんだ付けに対応します。 neither the electrode nor the●electrode land pattern disturb ADC LKS1260 12.5±0.3 12.5±0.3 6.0 1.5 disturb5.0 •neither Current Max.: 0.07A ~change 7.5A Small inductance to environmental ● 欧州RoHS対応品です。 the coil flux. temperature change. the coil flux. • Inductance range: 16mH and less3.6±0.2 3.6±0.2 Flat Top Film • Inductance Range: 2.2µH ~ 15000µH ● Magnetic shielded power chip inductors with a ● ● Suitable Strong to vibration, shock andtest substrate bend test by ● Strong to vibration, for reflow soldering. shockType and substrate bend by ■品名構成 Designation Inner Coating ① • Tolerance: ±2%, ③±3%, ±5% little leakage magnetic flux. ● Productsstructure meets EU-RoHS 4 electrode and therequirements. molded resin. Tolerance: ~ ±20% 例 • Examples 4 electrode terminals structureterminals and±10% the molded resin. ② ④ ● Small size and Low-profile. ② ④ ● Small inductance change to environmental Ceramic ● LKS 0745 T TEG M 100 ● Small inductance change■用途 to environmental Applications Core Low DC Resistance and larger Rated Current. temperature● change. Ferrite core ● Suitable for reflow soldering. temperature change. 品種形状端子表面材質二次加工公称インダクタンス許容差下記用途の受信用LFアンテナコイル ● Suitable for reflow soldering. 1 Electrode ● Products meet EU-RoHS requirements. Product Style Termination Taping Tolerance Nominal 8 H Suitable for reflow ① ③ ・タイヤ空気圧監視システム ● soldering. Code （mm） meets Surface EU-RoHS Material Inductance ● Products ① ③ requirements. ・スマートキーシステム 1 L Flat Top B Film D Circuit Construction magnetic flux of KT ● 101 PC4235･4545 PC4235･4545 Electrode 1 LKS R HOKE COILS COILS HOKE C4235･4545 EU RoHS • Strong to vibration, shock and Tested acc. to AEC-Q200 requirements NEW substrate bending DC Current Max.: 0.56A ~ 6.2A E Transponder coils (Rx) NEW Ro • 4 element terminal structure Inductance Range: 1.5µH ~ 470µH トランスポンダーコイル（受信） Tolerance: ±20%, ±30% Transponder coils (Rx) • DC current Max: 12mA ~ 15mA • Inductance Range: 12mH and less トランスポンダーコイル（受信） Transponder coils (Rx) • Tolerance: ±2%, ±3%, ±5% インダクタ Inductor Electrode • • • • インダクタ Inductor Magnet Ferrite Wire Core Molded Electrode Resin Choke Coils 4 0.6 3 0.5 3 差 nce 2% 3% 5% ty T） o.jp LTCC Substrates Improve performance, save space and lower costs by combining components using our thin film, silicon based, multi-element technology. Low Temperature Co-Fired Ceramic LTCC-KLC Low Temperature Co-Fired Ceramic LTCC-KLC Technology Low Temperature Co-fired Ceramic is a multilayer ceramic technology that allows for moderate firing temperatures. The LTCC process is similar to the thick film hybrid process employed for multilayer ceramic capacitor and chip inductors. The moderate firing temperature level below 900 °C is achieved by mixing alumina and glass as main ingredients of the ceramic tape, the so-called green sheets. This permits the co-firing with highly conductive material (silver) for the electrodes. LTCC also support the creation of buried components and thus contribute to miniaturization. • • • • • • Shrinkage Control The LTCCs are fired under free shrinkage conditions: The material is allowed to shrink in all three dimensions. The highly homogeneous structure of the green sheets and precise process control ensures high reproducibility of the dimensional accuracy. Relative accuracies of 0.05 % can be achieved. This high accuracy allows for the realization of dimensionally accurate cavities for the mounting of bare die semiconductor chips. • • • • • • Features • Excellent dimensional accuracy by KOA’s original shrinkage control technology • Multi layer technology up to 20 layers (more than 20 layers available on request) • Surface Flatness down to ±5 µm on request • High-density wiring by fine line patterning • Miniaturization by buried R, L, C and strip-lines • Back volumes and channels • Excellent high frequency performance up to 60 GHz by the use of low loss ceramics and conductors • Thermal expansion coefficient similar to Si and GaAs • Precision cavities enable bare chip mounting with short bond wires • Thermal vias under bare chips enhance heat transport • Superior heat and humidity resistance • • • • • • • KOA´s Integrated Passive Components KPC • Thin film (metal film) resistor array on Silicon wafer • Excellent resistance matching, TCR tracking and stability • Custom circuits are available with flexible layout (Different resistance combinations possible) • Higher Integration saves board space and overall assembly costs • Excellent reliability with standard molded IC package • Suitable for reflow soldering • Standard packagings: SOT-23 QSOP 16, QSOP 20, QSOP 24 SOIC-N08, SOIC-N14, SOIC-N16 Stack accuracy: 20µm max. Line width as low as 60µm Line-to-line spacing as low as 60µm Substrate flatness: 30 µm max. Via diameter: 100µm, 150µm, 200µm Through-via pad diameter: Via diameter +50µm min. Cavity width: 600µm min. Cavity depth: 100µm min. Cavity wall thickness: 500µm min Flexural/bending strength: 250MPa Coefficient of Thermal Expansion: 5.5ppm/K Thermal conductivity: 3W/m • K Minimum insulation resistance: 1x1013Ω • cm Dielectric constant at 1MHz: 7 Dielectric loss at 1MHz: <0.003 Density: 2.8g/cm3 Max. surface roughness (Ra): 0.4µm Min. withstanding voltage: 15kV/mm Fired layer thickness: 40µm ~ 125µm Cavity Via Thermal via Inductor Capacitor Inner layer 外装色：緑（CNN） Coating color：Green（CNN） ■特長 ● ● ● ● ● Conductor pattern Transmission line CNN • Standard Combinations Bussed – RBA 薄膜チップネットワー Thin Film Chip Networks High speed bussed – RBB ■ Dual terminator – RDA Differential terminator – RDB R2R network – RLA SOT-23 network – RTX, RTY Custom – RNX • T.C.R.: ±10ppm/K ~ ±100ppm/K • Resistance range: 10Ω ~ 510Ω ● IC-chip Buried resistor CHIP NETWORKS Bussed Resistors ● Cross-sectional structure Surface resistor Resistor Networks Resistor Networks ネットワーク抵抗器 Network Resistors S Integrated Components • Typical applications - Highly accurate peripheral resistors for analog operational amplifiers - Automotives, Analog instrumentations, IC-testers - Computers, Data communications, Network systems - Operational amplifiers, Terminations, Pull-up/Pull-down - Meets or exceeds IEC 60115-1, JIS C 5201-1, JIS C 5101-1 ● ● ● ● ● ■参考規格 Cavity ■定格 Custom Resistor Networks Ratings 定格電力 POWER Rating 抵抗値 Resistance （Ω）抵抗値許容差 Resistance Tolerance 絶対 Absolute 相対 Relative 抵 T.C.R 絶対 Absolu Precision Pair Resistors – CNN 0.05W/ B : ±0.1％ A : 0.05％ •CNN2A Thin Film on ceramic ±25 1k, 10k, 100k Element C : ±0.25％ B : 0.1％ • Ratio matching 定格電圧は定格電力×公称抵抗値による算出値、又は表中の最高使用電 • Ratio√￣￣￣￣￣￣￣￣￣ Tolerance: ±0.05% & ±0.1% Rated voltage＝ √￣￣￣￣￣￣￣￣￣￣￣￣ Power Rating×Resistance value or Max. working volta • T.C.R. absolute: ±25ppm/K • T.C.R. relative: 5ppm/K ■回路構成 ③ Applications: • High density sensor interconnect • MEMS Packages • High frequency: Microwave, Milliwave • Harsh environment: High Temperature, High humidity • Mobile Communications • Multi Chip Modules • Interposer substrates Reference Standards IEC 60115-1 JIS C 5201-1 形名 Type Isolated Resistors – RIA • Precision value matching • Relative resistance tolerances: 0.05% ~ 2% • T.C.R. tracking: 5ppm/K ~ 50 ppm/K ■ Features 金属皮膜のチップネットワーク抵抗器です。相対T.C.R.、相対精度に優れております。高精度オペアンプ用のペア抵抗です。 1kΩ〜100kΩまでのあらゆる抵抗値の組合せにカスタム対応します。リフローはんだ付けに対応します。端子鉛フリー品は、欧州RoHS対応品です。 Metal film chip network resistors. Excellent in relative T.C.R. and relative accuracy. Pair resistors for high precision OP-Amplifiers. As custom products, any pairs between 1kΩ and 100kΩ are available on request. Suitable for reflow soldering. Products with lead free termination meet EU-RoHS requirements. Circuit Construction 44 ① ③ ④ ② ④ R1 R2 ① ② 本カタログに掲載の仕様は予告なく変更する場合があります。ご注文およびご使用前に納入車載機器、医療機器、航空機器など人命に関わったり、あるいは甚大な損害を引き起こす可 Specifications given herein may be changed at any time without prior notice. Please con Contact our sales representatives before you use our products for applications including Malfunction or failure of the products in such applications may cause loss of human life Leaded Resistors The industry’s broadest line of leaded resistors and networks include designs with various material composition and structure for use in general purpose, precision, anti-surge, high voltage, high resistance, PTC and fusing applications. Carbon Film General Purpose - Reduced Size and Flame Proof CF/CFS/CFP Series • Power Rating: 0.25W ~ 0.5W • Resistance Range: 2.2Ω ~ 5.1MΩ • Tolerance: ±2% or ±5% High Power Resistor - SPR and SPRX • Power Rating: 0.25W ~ 5W • Resistance Range: 0.1Ω ~ 110kΩ • Tolerance: ±1%, ±2% or ±5% Metal Film General Purpose Reduced size MF/MFP/MFS/SN Series • Power Rating: 0.25W ~ 2W • Resistance Range: 1Ω ~ 5.11MΩ • Tolerance: ±0.1% ~ ±5% • T.C.R.: ±25 ~ ±200 ppm/K Wirewound Miniature type - CW/CWP/CWH Series • Power Rating: 0.25W ~ 3W • Resistance Range: 0.1Ω ~ 3kΩ • Tolerance: ±0.25% ~ ±10% Power - RW/RWH Series • Power Rating: 0.5W ~14W • Resistance Range: 0.1Ω ~ 62kΩ • Tolerance: ±0.5% ~ ±5% Power Rectangular Type - BGR, BWR Series • Rectangular Ceramic Case • BGR with glass core • BWR with ceramic core • Power Rating: 1W ~ 40W • Resistance Range: 0.1Ω ~ 390Ω • Tolerance: ±1% ~ ±10% High Voltage/High Power - P Series • Special shape parts • Power rating: up to 250W • Working Voltage: up to 300 kV Leaded SIP Networks Precision - RNS/SF Series • Power Rating: 0.125W ~ 1W • Resistance Range: 0.2Ω ~ 6MΩ • Tolerance: ±0.01% ~ ±5% • T.C.R.: 5 ~ 50 ppm/K Metal Oxide General purpose - MO/MOX Series • Power Rating: 0.5W ~ 3W • Resistance Range: 5.1Ω ~ 150KΩ • Tolerance: ±2%, ±5% • T.C.R.: ±200 ppm/K Thick Film - RKC/RKH/RKL Series • Number of Pins: 3 ~ 16 • Resistance Range: 10Ω ~ 2.2MΩ • Tolerance: ±1% ~ ±5% • Custom circuits available Precision Metal Film - MRP • Resistance Range: 50Ω ~100KΩ • Tolerance: ±0.1% ~ ±1% • Ratio Tolerance: 0.025% ~ 0.5% Resistive Film Reduced Size - MOS/MOSX Series • Power Rating: 0.5W ~ 5W • Resistance Range: 0.1Ω ~ 100KΩ • Tolerance: ±1%, ±2% or ±5% • T.C.R.: ±300 ppm/K Trimming Line Marking Protective Coating Resistive Film Insulation Coating End Cap Power Type - BSR Series • Rectangular Ceramic Case • Power Rating: 2W ~ 20W • Resistance Range: 430Ω ~ 75KΩ • Tolerance: ±5% • T.C.R.: ±300 ppm/K Lead Wire Lead Frame Ceramic Substrate Inner Electrode Conformal coated - Z Series • Max. Amperage: 1.5A, 2.5A • Resistance: less than 20mΩ Molded - J Series • Max. Amperage: 8A, 10A • Resistance: 10mΩ max. Jumper Wire - JL Series • Max. Current Rating: 8A, 10A • Resistance: 20mΩ max. • Wire diameter: 0.5 or 0.6mm Type J Molded Resin Current Sensing Rectangular Type BPR Series • Power Rating: 2W ~ 14W • Resistance Range: 0.01Ω ~ 1Ω • Tolerance: ±5% or ±10% • Twin Type with 3 leads available Ceramic Case Cement Resistive Element Glass Coating Zero Ohm/Jumper Ceramic Core Specialty Anti-Surge, Metal Glaze - RCR Series • Max. Working Voltage: 500V ~ 5000V • Power Rating: 0.25W ~ 3W • Resistance Range: 3.3Ω ~ 100MΩ • Tolerance: ±1% or ±5% High Voltage, Metal Glaze - GS Series • Max. Working Voltage: 0.5kV ~ 40kV • Power Rating: 0.25W ~ 12W • Resistance Range: 0.5MΩ ~ 10GΩ • Tolerance: ±0.5% ~ ±10% Ceramic Composition - PCF/HPC Series • KOA original ceramic resistor • Excellent characteristic against high voltage surge current • Power Rating: 0.5W ~ 5W • Resistance Range: 3.3Ω ~ 390KΩ • Tolerance: ±10% ~ ±20% Solder Plated Copper Wire Linear Thin Film PTC - LT/LP Series • Resistance Range: 1Ω ~ 100kΩ • Tolerance: ±1%, ±2%, ±5% • T.C.R.: 150ppm/K ~ 5000ppm/K • T.C.R.: Tolerance: ±50ppm/K, ±5% ~ ±10% Fusing Resistors - RF/BMF Series • Power Rating: 0.17W ~ 5W • Resistance Range: 0.1Ω ~ 15kΩ • Tolerance: ±5%, ±10% • RF25CC: Constant current fusing type • RF26: Radial type • BMF: Rectangular type • WF: Thermal fuse built-in • TPR1: Temperature protection resistor For an Innovative Partnership • • • • • • A wide programme of passive components Product innovations Superior Customer Support Total Quality Management Custom-built logistic packages Competitive prices Logistics is the key to efficiency and worldwide success. KOA Europe runs a warehouse with approx. 2 billion pieces stock on hand to support customers within 24 hours with the most common parts. Our experts are pleased to share their experience with you: • • • • • JIT shipments Customer specific labelling Full range of EDI possibilities Electronic incoming and dispatch control Consignment Stock Continuous improvement is a ”must” for today´s global business • We achieved ISO 9001 certification the year following our foundation • Moreover, KOA´s production plants are ISO/TS 16949 and ISO 14001 approved Technical Support plays a critical role in helping customers to improve product quality. KOA´s technical staff is highly trained in: • • • • Development of new products Design-In Application Engineering Product Performance Characteristics Even with all this expertise, a company can only be as good as its Customer Service Team. At KOA you will find: • • • • Competent and reliable partners for your enquiries A multi-lingual team Automated order and sample processing Prompt, efficient responses And yet continuous improvement is our goal. Constant staff training is one means by which we are aiming to achieve it, good communication with you is another. Let´s work together for… Your KOA Europe Team EUROPE GMBH Kaddenbusch 6 D-25578 Dägeling/Itzehoe Germany Phone Fax E-Mail Internet : : : : +49 (0)4821/8989-0 +49 (0)4821/898989 Koa-Europe@koaeurope.de http: //www.koaeurope.de © KOA Europe 11 / 2012 KOA Europe…In Dägeling, Product and Application Engineers, together with an experienced Sales Force and a dedicated Customer Service Team, share one focus: our mutual growth and success. Such aspirations necessitate all-round competence including continuous efforts in:

Catalog - Elbacomp

Add this document to collection(s)

Add this document to saved

Suggest us how to improve StudyLib