Short Circuit calculations

“A Quick & Easy Way to Perform Your Short Circuit
(Now you can Easily Complete a Short Circuit analysis of your Installation in just 1
Avoid Embarrassment!
Why risk of paying more than you have to for Your Fuse, Circuit Breakers, Load break
Switches etc, because there pricing is based on their Short Circuit Rating. The bigger the
rating the more expensive they are, conversely if the fault level of your protection device is
under sized You risk serious injury and fire.
“Look Like an Expert”
The importance of performing the Short circuit calculations can not be over stated, it is
probably the most important job to be done. The task of performing these crucial, complex
and time consuming calculations could take days or even weeks…Until Now!
Be Successful!
Discover exactly how to perform the Short Circuit calculations in 1 minute Starting from Scratch.
Feel good by quickly achieving all your results by using this Powerful program.
You simply input Your:Transformer size (KVA)
Transformer reactance %
Transformer Secondary voltage
Length of cable run
Cable sizes & No. of cores per phase
Push the “Calculate” button and all your results are instantly displayed at each of Your
boards, showing:Fault levels in MVA
Power factor
X/R ratio
Feel on top of the world and gain freedom from worry!
“Now when you need to purchase your protection devices, you can be sure the job is done right.
You will save time and money when You use this exciting new program, it can pay for itself 1,000’s
of times your investment”.
Leave nothing to guess work, quickly change your life and create wealth for yourself!
To make life Easier for You the Short Circuit calculations are performed
Automatically in V 8.0 and V12 Professional…Simply Brilliant!
Don’t Risk It!
(During a fault condition an arc will be drawn across the contacts of your protection device as
it tries to clear the fault and interrupt the current flow. If the fault level of the protection
device is undersized the arc can be maintained this would result in an overheating of the
cables, the insulation around the cables will soften or even melt the conductors then become
exposed and a danger to people causing electric shock or burns. The metal contact inside your
protection device may become so hot that they begin to melt, a serious fire danger may then