Technical specification
Cold recycler and soil stabilizer
WR 240 / WR 240 i
Technical specification
Cold recycler and soil stabilizer WR 240 / WR 240 i
Working width (max.)
7’ 10” 2,400 mm
Working depth *
0 – 20” 0 - 510 mm
Milling and mixing rotor
Tool spacing
.8” 20 mm
Number of tools
170
Drum diameter with tools
Engine
58” 1,480 mm
WR 240
WR 240 i
Manufacturer
Cummins
Type
QSX 15
Cooling
Water
Number of cylinders
Rated power at 2,100 min-1
Maximum power
6
447 kW / 600 HP / 608 PS
433 kW / 580 HP / 589 PS
at 1,900 min-1:
at 1,800 min-1:
455 kW / 610 HP / 619 PS
447 kW / 600 HP / 608 PS
Displacement
4 gal 15 l
Fuel consumption
31.7 gal / h 120 l / h
31.2 gal / h 118 l / h
Fuel consumption in field mix
15.9 gal / h 60 l / h
15.9 gal / h 60 l / h
EU Stage 3a / US Tier 3
EU Stage 3b / US Tier 4i
Emission standards
Electrical system
24 V
Filling capacities
Fuel tank
396.3 gal 1,500 l
Hydraulic fluid tank
84.5 gal 320 l
Water tank
132 gal 500 l
Driving properties
Travel speed in milling and travel gear
0 – 656 ft / min: 7.5 mph 0 – 200 m / min: 12 km / h
Transversal inclination, max8°
Ground clearance
approx. 16” 400 mm
Tires
Tire size, front / rear
28L - 26
Shipping dimensions
Truck transport dimensions (L x W x H)
30’ 3” x 9’ 10” x 9’ 10” 9,230 x 3,000 x 3,000 mm
Ocean transport dimensions (L x W x H)
30’ 10” x 10’ 6” x 10’ 6” 9,400 x 3,200 x 3,200 mm
*1 = The maximum working depth may deviate from the value indicated, due to tolerances and wear.
Dimensions in American standard and mm
11’ 8” 3,550 mm
8’ 6” 2,600 mm
32”
810 mm
28” *1
710 mm
9’ 10” 3,000 mm
machine center of gravity *2
11’ 10” 3,600 mm
20’ 4” 6,200 mm
25’ 9” 7,850 mm
29’ 6” 9,000 mm
*1 = with injection system
*2 = based on operating weight, CE
9” 230 mm
20” 520 mm
6’ 6” 1,980 mm
7’ 10” 2,400 mm
9’ 10” 3,000 mm
30’ 3” 9,230 mm
2 // 3
Machine weights
WR 240 and WR 240 i
Empty weight of machine in standard design without filling media 62,611 lbs 28,400 kg
Operating weight, CE *
64,816 lbs 29,400 kg
Operating weight, max. (full tanks, full range of equipment)
with ESP foamed bitumen
70,548 lbs 32,000 kg
Weights of filling media
Water tank filling
1,102.3 lbs 500 kg
Diesel tank filling (6.93 lbs / gal (0.83 kg / l))
2,744.8 lbs 1,245 kg
Optional equipment features increasing / reducing empty weight
Optional additional equipment
Single ESP:
Injection system for water or bitumen emulsion
Dual ESP:
Injection system for water and bitumen emulsion
ESP foamed bitumen:
Injection system for water and foamed bitumen
ESP 1800 L:
Injection system for water, 475.5 gal / min (1,800 l / min)
Additional water tank (empty)
Additional water tank filling in kg
* = weight of machine with half-full water tank, half-full fuel tank, driver (165 lbs (75 kg)) and on-board tools
837.8 lbs 380 kg
1,565.3 lbs 710 kg
3,086.5 lbs 1,400 kg
771.6 lbs 350 kg
970 lbs 440 kg
2,094.4 lbs 950 kg
Rear view of WR 240 and WR 240 i
20” 510 mm
Dimensions in American standard and mm
2” 50 mm
17” 420 mm
7’ 10” 2,400 mm
4 // 5
Turning radius of WR 240 and WR 240 i
00
in
Rm
Rm
in
=2
3’
=
,0
’ 7
23
7”
7,2
00
mm
Rm
in
=1
0’ 4
” 3
,1
50
mm
Dimensions in American standard and mm
mm
in
Rm
=
”
’6
11
0
50
3,
m
m
Equipment features of cold recycler and soil stabilizer WR 240 / WR 240 i
Standard equipment:
Optional equipment:
Basic machine with engine
Machine frame offering free view of the milling edge, right
Integrated water tank
Right-hand wheels within the milling width
Diesel engine – power control unit
Cooling system with temperature-governed fan speed
Lockable, soundproof engine cowling
Ample storage space for cutting tool containers
Air compressor system
Standard painting in Wirtgen white with orange stripes
Milling and mixing unit
Mechanical rotor drive via power belt and automatic belt
tensioner
Variable cutting speed by combining three selectable engine
speeds and three adjustable belt pulley arrangements
Power control during initiation of the milling process
Down-milling or up-milling option depending on the working
direction
Hydraulically adjustable crusher bar
Hydraulically adjustable scraper blade
Continuous hydraulic raising and lowering of the milling rotor
Variable mixing chamber
Milling and mixing rotor
Standard milling and mixing rotor, milling width 7’ 10” (2,400 mm),
HT11 quick-change toolholder system, tool spacing 3/4” (20 mm),
tool shank diameter 7/8” (22 mm)
Replaceable edge ring segments
Injection system
Excluding injection system
Rotor housing openings closed by means of cover panels
Machine control and leveling system
Multifunctional color control screen displaying major machine
operation parameters
Comprehensive diagnostic system included in color control
screen
Electronic cross slope control for machine leveling
Programmable automatic lowering and raising of the milling and
mixing rotor to start or stop the milling process
Automatic functions for increased machine operator comfort
Operator’s platform
Anti-vibration mounted comfort operator’s cabin
ROPS and FOPS integrated in cabin frame
Windows with integrated windscreen wipers for an optimal view
of work areas
Cabin can be moved out over the right side of the machine
Reversing camera with graphical reverse assist
Rear view image is automatically displayed on color screen
during reversing
Operator’s stand can be swiveled about 90 degrees
Heating system and roof hatch
Various storage and shelving options
12-volt and 24-volt sockets
Fold-up access to operator’s platform
Working lights integrated in cabin roof
Mirrors in the front section of the machine
Chassis and height adjustment
Continuously adjustable hydraulic all-wheel drive
Four-fold full-floating axle for high machine stability
All-wheel steering with various steering modes
Miscellaneous
Lighting package with 14 halogen working lights
Comprehensive safety package with emergency stop switches
Comprehensive toolkit with lockable toolbox
European design type certification, GS mark
(Geprüfte Sicherheit = Tested Safety) and CE conformity
Warranty of 12 months or 1,000 engine operating hours
Machine commissioning by qualified personnel
Basic machine with engine
Special painting in one, two or several colors
Electrically operated diesel refueling pump
“Wiggins” quick-filling system for diesel refueling
Hydraulically operated high-pressure water cleaner, 190 bar
Battery-operated hydraulic module for emergency functions,
milling drum turning device and cutting tool extractor
Milling and mixing unit
Drum turning device for cutting tool replacement
Pneumatic cutting tool driver and extractor
Hydraulically operated cutting tool extractor
Milling and mixing rotor
Milling and mixing rotor, milling width 7’ 10” (2,400 mm), HT11
quick-change toolholder system, tool spacing 3/4” (20 mm), tool
shank diameter 1” (25 mm)
Injection system
Single ESP: Injection system for water or bitumen emulsion
Dual ESP: Injection system for water and bitumen emulsion
ESP foamed bitumen: Injection system for water and foamed
bitumen
ESP 1800 L: Injection system for water, 475.5 gal / min (1,800 l / min)
Additional water tank 251 gal (950 l) to increase storage capacity
for foamed bitumen production
Suction hose for water or bitumen emulsion connecting machine
and tanker truck
Suction hose for hot bitumen connecting machine and bitumen
tanker truck
Slurry pipe to transport slurry from the WM 1000 to the injection
bar
Additional push bar
Machine control and leveling system
Screen system including 3 additional cameras and display on
additional screen
Operator’s platform
Air-conditioning system with automatic climate control integrated
in roof lining
Radio system with CD / MP3 / USB / Bluetooth and two
loudspeakers
Job data printer to keep a log of binder consumption and area
performance
Miscellaneous
Lighting package with 8 halogen and 6 Xenon working lights
6 // 7
Wirtgen America Inc.
6030 Dana Way · Nashville, TN 37013, USA
Phone: (615) 501-0600 · Fax: (615) 501-0691
Internet: www.wirtgenamerica.com
Illustrations are without obligation. Technical details are subject to change without notice.
Performance data depend upon operating conditions. – No. 2278114 83-20 US-10/11 © by Wirtgen GmbH 2011. Printed in Germany