UL Certificated Test Lab and Agency

advertisement
• QUALITY
• INTEGRITY
• SERVICE
UL
Certificated
Test Lab
and Agency*
Your Resource for UL Recognition
and Listing of Products and Materials
* UL Categories: ZPMV2, ZPXK2, QMTS2, QMJU2, QMFZ2, OCDT2
Microtek Laboratories (West*) is a Certificated Lab under UL’s ThirdParty Test Data Program (TPTDP) and Client Agent Program (CAP)
company providing full Engineering, Administrative and Testing
Services to provide its customers with the dedicated resources and
knowledge to achieve your UL Recognition.
UL 746A
UL 746B
UL 746E
UL 746F
UL 94
UL 796
UL 796F
Los Angeles | USA
1435 Allec Street
Anaheim | California 92805-6306
Toll Free in U.S.
(800) 878-6601
TheTestLab.com
Phone: +1 (714) 999-1616
Email: ULTesting@TheTestLab.com
QUALITY ▪ INTEGRITY ▪ SERVICE
Microtek Laboratories provides UL Engineering and Administrative Client Agent
Services and Testing to achieve your UL Recognition.
UL’s testing services are organized into sections that evaluate specific types of
products. To establish recognition, manufacturers are requested to submit samples
for assessment in accordance with specific UL standards. Microtek
Laboratories performs the applicable evaluation and testing of these samples and
then assembles the data packet for UL review. Upon compliant results, UL
evaluates the test data and makes the final determination as to whether a product
is eligible for recognition. Upon test data review and acceptance by UL,
Notification of Authorization (NofA) is issued to the manufacturer to apply the UL
certification mark to their products.
TEST CAPABILITIES
UL 94 ‐
Flammability of Plastics Materials
▪ 94HB Horizontal Burning Test
▪ 94V‐0, V‐1, or V‐2 Vertical Burning Testing
▪ VTM‐0, VTM‐1, or VTM‐2 Thin Material Vertical Burning Test
UL 746A ‐ Polymeric Materials — Short Term Property Evaluations
UL 746B ‐ Polymeric Materials — Long Term Property Evaluations
▪ Relative Thermal Index Based Long Term Thermal Aging (LTTA)
UL 746E ‐ Polymeric Materials — Industrial Laminates, Filament Wound Tubing,
Vulcanized Fiber and Materials Used in Printed Wiring Boards
UL 746F ‐ Polymeric Materials — Flexible Dielectric Film Materials for use in Printed Wiring Boards and Flexible Materials Interconnect Constructions
UL 796 ‐ Printed Wiring Boards
UL 796F ‐ Flexible Materials Interconnect Constructions
UL Subject 5703
Outline of Investigation for Determination of the Maximum Operating
Temperature Rating of Photovoltaic (PV) Materials
Short Term Aging and Pre‐Screen Testing UL TEST CAPABILITIES SCOPE APPROVED UNDER UL DATA ACCEPTANCE PROGRAM (DAP) Microtek Laboratories provides immediate processing of your UL test program, personalized service and highest level of
technical support for testing your products for UL Recognition. Microtek Laboratories is a Certificated UL Administrative and
Engineering Agency for the following categories indicated below. The industry leader since 1986, Microtek specializes in UL 796,
UL 796F, UL 746A, UL 746B, UL 746E, UL 746F and UL 94 Flammability testing with unmatched experience evaluating Industrial
Laminates, Plastics, HDI Materials, Printed Circuit Boards (PCB’s) and soldermask materials.
UL 94
94HB Horizontal Burning Test 94V‐0, V‐1, and V‐2 Vertical Burning Testing 94VTM‐0, VTM‐1, and VTM‐2 Thin Material Vertical Burning
UL 746A
Ash Content Comparative Tracking Index (CTI)
Deflection Temperature of Polymeric Materials Under Load
Dielectric Breakdown and Voltage Strength
Flexural Strength
Glow Wire Ignitability (GWI)
High Current Arc Ignition (HAI)
High Voltage Arc Resistance (HVAR)
High Voltage Arc Tracking Rate Resistance (HVTR)
High Voltage, Low Current Dry Arc Resistance (D495)
Hot Wire Ignition (HWI)
IZOD Impact Strength
Moisture Absorption
Specific Gravity of Polymers
Tensile Impact
Tensile Strength of Thermoplastic Polymeric Materials
Tensile Strength of Thin Polymeric Sheeting
Vicat Softening Point for Polymeric Materials
Volume and Surface Resistivity
UL 746E
Bond Strength Delamination and Blistering
Dissimilar Dielectric Materials Thermal Cycling
Flammability: Metal Clad Laminates and Permanent Coatings
Microsectional Analysis
Thermal Shock
UL 746F
Ambient Bend Bond Strength
Cold Bend
Cover Layer
Delamination
Flammability
Microsectional Analysis
Repeated Flexing
Thermal Shock
UL 796 Blistering
Bond Strength
Delamination
Flammability
Thermal Cycling
UL 796F
Ambient Bend Bond Strength
Conductive Paste Adhesion Cover Layer Cold Bend
Delamination
Dissimilar Dielectric Materials Thermal Cycling Plating Adhesion
Repeated Flexing
Silver Migration Stiffener Bond Strength Thermal Shock UL CATEGORY
DESCRIPTION
ZPMV2
Wiring, Printed — Component (Rigid PCB’s)
ZPXK2
Wiring, Printed‐Flexible Material Constructions — Component (Flexible and Flex‐Rigid PCB’s)
QMTS2
Polymeric Materials – Filament‐wound Tubing, Industrial Laminates, Vulcanized Fibers, and Materials for Use in Fabricating Recognized Printed Wiring Boards – Component
QMJU2
Coatings for Use on Recognized Printed Wiring Boards – Component (solder masks)
QMFZ2
Plastics – Component
OCDT2
Insulating Devices and Materials, Miscellaneous – Component
*
For Additional Information
or to Start your UL Test Program Call: +1 (714) 999‐1616
or visit:
ULTesting.com
Engineering Contacts
Emi Lee
UL Senior Project Manager
Emi@TheTestLab.com
•
•
•
•
•
•
•
Soldermasks
Coatings
Laminates
Plastics
Polymeric Materials
Printed Wiring Boards (PCB’s)
Rigid, Flexible and Rigid‐Flex
Josephin Mazariegos
UL Project Manager
Josephin@TheTestLab.com
•
•
•
•
Printed Wiring Boards (PCB’s)
Rigid, Flexible and Rigid‐Flex
Soldermasks
Coatings
MICRO TECHNICAL LABORATORIES,
DBA MICROTEK LABORATORIES
1435 S ALLEC ST, ANAHEIM, CA 92805-6306, USA
has been assessed and found to be eligible to participate in the
Third Party Test Data Program (TPTDP)
DA File: DA355 (AG313)
Issued: 2014-11-25
Expires: 2015-12-21
Bruce R. Proper
Global Process Owner, Data Acceptance Program
MICRO TECHNICAL LABORATORIES,
DBA MICROTEK LABORATORIES
1435 S ALLEC ST, ANAHEIM, CA 92805-6306, USA
has been assessed and found to be eligible to participate in the
Certificated Agency Program (CAP)
DA File: AG313 (DA355)
Issued: 2014-11-25
Expires: 2015-12-21
Bruce R. Proper
Global Process Owner, Data Acceptance Program
Download